Municipal Administration And Water Supply Department Tender

Refilling the trench with excavated earth in layer 25cm thick well rammed including watering consolidation etc., complete MDU-CORP-BUILD-DATA-P-26-SL-4

Construction of manholes depths invert including earthwork excavation as per SS 20B laying cement concrete in CM 1:3:6 using 40mm B.G. jeely for foundation sinking well kerb below G.L. for 4.5m depth and above, pumbing timbering charges for 2.5m depth and above stock brick work in CM 1:3 for 23cm wall and plastering interior with cm 1:3 20mm thick and exterior with CM 1:3 using 12mm thick, laying plain cement concrete 1:3:6 using 12mm thick, jelly fixing the frame providing CI steps, manhole cover and frame benching and channelling including refilling the trenches with quarry dust etc., complete for the follow size for earth manhole (as per the type design drawing for manholes) MDU-CORP-BUILD-DATA-P-93-SL-144-b,c Up to 1.00m Depth

Up to 1.50m Depth

Interconnection works for existing UGD main including cutting existing pipe fixing branches coupler jointing and boiling out water etc., complete excluding the earthwork excavation etc., complete.

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in subbase/basecourse on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised Interlocking Paver Block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2007 of rubberized interlocking Paver Block in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification.

Supply Of Manhole FRC Frame 600mm with Cover etc complete.,

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismanting the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jally for raising the existing the manhole wall and using cc 1:2:4 with 20mm chips for finishing the top surface of manhole etc complete.

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board double arrow big size 1.00mX0.50m size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification.

Add GST 18%