Municipal Administration And Water Supply Department Tender

Din Standard Outlets SK brand

Emergency kit E-sab Make

V 235 Model Vaccum Pump with 3Hp Motor Starter Filter with 220Ltrs Receiver

Single Bpc Flow Meter

600ml Ward Suction unit

Theater Suction n unit

12mm Mexflow brand copper pipe

15mm copper pipe 9mm thick

Supplying and fixing of SS Sink of size 1200x550x180mm with Standard Specification etc., Complete

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay with Standard Specification etc., Complete

Supply and Fixing of Operation Theatre Light with the Voltage of 110/220V Frequency 50Hz color temperature 5200K , Intensity of 150000 Etc., Complete ( AS Per Quatation)

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply, delivery and fixing of 5000 Litre HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc., conforming to IS specification including primer coating and enamel painting as per design given by the departmental officers etc., complete as per standard specification.

Roofing with Galvanised Corrugated Iron Sheet of 0.8mm thickness (22 Gauge) using 20mm x 6mm G.I bolts and nuts and limpet washers, hook bolts and nuts (of size required) and washers or screws, wooden battens, 50mm x 6mm iron wind ties and white lead etc., complete as per standard specification.

Add GST @ 18%