Municipal Administration And Water Supply Department Tender

Supplying and filling in foundation and basement with filling M-sand in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation -

Plinth Beam

Column

Side wall

Reinforced Cement concrete 1:1.5 :3 (one cement,one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete as directed by departmental officer etc., complete. - Upto Basement

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Plain Cement Concrete 1:2:4 (one cement, two sand and four fine aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and labour charges etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using III class Country bricks of size 8 3/4"X41/4"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

upto basement

above basement

Plastering with cement mortar 1:5 (One Cement, Five Sand) 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., Manually operated (up to 8 m2 area)

Painting Two Coats for New Iron Work using Best Quality Synthetic Enamel Paint of Approved Color and Quality over one coat of Priming Coat including cost of Paint cleaning the surface etc. completed as per standard specification

supplying and fabricating and fixing in position of mild steel with singles/double shutters using M.S angle of size 40 x 40 x6mm for outer frames and 35 x35 x5mm for shutters frames fully covered with M.S flat of size 32 x6mm including providing one coat of red oxide primer.the rate shall inclusive of cost of all materials etc

Wiring with 2x1.5 Sq.mm [22/0.3] PVC insulated SC unsheathed Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T.switch with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point as per standard specification,. SD22.

Supply and fixing of 4'40 W twin box type flu. Fitting complete with copper choke and condensor with conduirt pipe suspension from ceiling with PVC unsheathed Copper leads from terminal to the fitting with flu. tubes etc., comlete as per standard specification SD88

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj /crompton / K. Lite) suitable for11W CFL lamp with CFL as per SD- 83.

Supply and run of 2 of 4 sq.mm 56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains etc,., complete as per standard specification. SD 65

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains etc,., complete as per standard specification. SD 70

supply and fixing of cudapah slab of 40mm thick for rack purpose to load the dry waste in bundle forms including all labour charged specifications etc complete as per standard specifications