Municipal Administration And Water Supply Department Tender

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Special ceiling plastering and finishing the exposed surface of RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc. with Cement Mortar 1:3 (One Cement and Three Sand) 10 mm thick including hacking the surfaces and providing Cement Mortar nosing, beading for sunshades, staircases, steps, landing slabs and finishing, curing, etc., in all floors complying with standard specification as directed by the departmental officers (TNBP No: 56, 57)

Plastering with cement mortar 1:5mix (One cement and five sand) using 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Paving the floor with plain/design ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement including cost of all the materials and labour etc., complete as per standard specification.

Dadooing the walls with best approved first quality Colour glazed tiles of size 305 x 200 x 6mm set in Cement Mortar 1:2 (One cement and two sand) 10mm thick and pointed with white cement mixed with colouring pigments at the rate of 0.40 kg. per sqm finishing neatly, curing, etc., in all floors as directed complete complying with standard specification. (TNBP No: 39, 39A)

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting new iron works such as steel doors, windows, ventilators window bars balustrades etc. with two coats of best approved first quality and colour of synthetic enamel paint over the existing red-oxide priming coat in all floors excluding cost of priming coat etc. complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and delivery of PVC 6Ksc pipe including all cost and coveyance and all labour charges etc., complete. (a) 110mm dia PVC Pipe (2024-25 TWAD SOR VOL I P NO 146 M 0872)

110mm dia PVC Elbow (2024-25 TWAD SOR VOL I P NO 150 M 941)

110mm dia PVC Tee (2024-25 TWAD SOR VOL I P NO 150 M 0949)

25mm dia PVC Pipe (2024-25 TWAD SOR VOL I P NO 146 Sl.No M-0876)

25mm dia PVC Elbow (2024-25 TWAD SOR VOL I P NO 147 Sl.No M-0888)

25mm dia PVC Tee (2024-25 TWAD SOR VOL I P NO 148 Sl.No M-0900)

25 mm x 20 mm PVC Reducer Elbow (2024-25 TWAD SOR VOL I P NO 149 M 0920)

15mm dia PVC Screw down tap (2024-25 TWAD SOR VOL I P NO 150 M 0511)

25mm (1") dia PVC Coupling (2024-25 TWAD SOR VOL I P NO 147 Sl.No M-0882)

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.(a) 25mm dia PVC Pipe (2024-25 TWAD SOR VOL II P NO 171 Sl.No 11b i WD-W0423)

110mm dia PVC Pipe (2024-25 TWAD SOR VOL II P No 171 Sl.No 11b i WD-W0425)

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supply and Fixing of incinerator (sanitary napkin buring machine) of size 600mm X 600mm X 900mm With MS Legs Whole system made up of mild stell material with LCD Display with temperature and time indication 'PUF' Insulation, easy removing ash collecting tray ensures cleanliness, bigdoor opens makes it convinient to load used napkins, heater of High power of 3000 W Makes the temperatre rise quickly and improve the efficiencly, Computerised programmed control panel of 600 to 800 Celsius gives long life for heaters and reduce the electircity bill including all cost of labour, treansportation charges, fixing of machine in suitableplace with directed by the departmental officers etc., complete.

Supply & Delivery and fixing of 1000 LiterHDPE tank as per IS 12701 / 1996 including Loading, unloading,transportation and labour charges fro fixing of GI pipes and specials for pipe connection works including cutting threading and fixing charges etc., as per standard specifications.(2024 -25 TWAD SOR Page No 87 Sl.No 17.0 WD-M1418)

Supply & Delivery of single phase 1.5 Hp Submersible Motor with out panel board 15LPMx100m with ISI Mark As Per IS 8034/2002 without Panel board including cost of all labour charges etc., complete as per standard specifications. (2024-25 TWAD SOR VOL II Page No 101 Sl.No 2.0 WD-M 1587 )

Labour charges for the erection of submersible pumpset in bore well/open well including fixing and jointing submersiblecable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pumproom and erection of panel board consisting of TPICN switches starter,Voltmeter,Ammeter,threepilot (indicating) lamp scapacitor single phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IErules etc.,complete and testing the pumpset and trail run for 10 days. 7.50 HP Open well Motar. (2024-25 TWAD SOR VOL II Page No 204 Sl.No 17ci WD-W 0871 )

SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START 1.50 HP Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection,Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). (2024-25 TWAD SOR VOL II Page No 119 Sl.No 11.0 WD-M 1906 )

Supply and Run of 2.5sq.mm 3 core flat type copper cable confirming to IS 694 / 1990 including all cost etc., complete as per standard specifications. (2024-25 TWAD SOR VOL II Page No 124 Sl.No 12.1 WD-M 1974 )

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting SD 88

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc. (2024-25 TWAD SOR VOL II Page No 91 Sl.No 18.0 WD-M 1471 )

Supply and fixing Name board & Figure including all labour charges etc., complete