Municipal Administration And Water Supply Department Tender

Providing and laying Tack coat of 2.5kgs/10sqm over WMM Surface treated with binder using 2.5kgs of Bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder ,including labour charges for applying the required quantity of Bituminous binder using tack coat emulsion distributor(RS1) or as prime coat manually etc.., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying Tack coat of 2.0kgs/10sqm over Existing BT Surface treated with binder using 2.0kgs of Bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder ,including labour charges for applying the required quantity of Bituminous binder using tack coat emulsion distributor(RS1) or as prime coat manually etc.., complete as per 502 of MORTH Rev-5 Specifications

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1 m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1 m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70KN power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat seperately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V

Providing and laying 50 mm compacted thick Dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm , 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 46.28 kgs(add 10% Plastic waste) of VG60/ VG70 bitumen,4kg of plastic for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mix to uniform thickness of 40mm /30 mm with mechanical paver to the specified grades and cross sections and consolidated by 80-10 tonne vibratory/ pneumatic roller to the required density etc., including labvour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler , tipper trucks , paver finisher /9m paver finisher , vibratory / pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Road marking with hot applied Thermoplastic compound with reflectorising glass benads on bituminous suface.Providing and laying of hot applied thermoplastic compound 2.5mm exclusive of surface applied glass beads as per IRC 35.The finished surface to be level,uniform and free form streaks and holes.

Manufacturing, Supply and Fixing of Retro Reflective Road Name Sign Board Single Arrow of Size 1.60 x 0.90 m made out of Wide Angle Cube Corner Micro Prismatic grade sheeting conforming to IRC-67;2010 & Type XI standards of ASTM D 4956-09 Specification and fixed over 2 mm thick Aluminum sheet & back support frame of 25 x 25 x 3 mm MS Angle Frame supported by 32 NB Stainless Steel Pipe all around and 65 NB Pipe Vertical post Firmly Fixed to the ground by means of properly designed Foundation with M 15 Grade cement concrete 30 cm x 30 cm x 45 cm Etc complete. The information message shall be made out of cut letters in Blue color transparent overlay film as per IRC 67-2010 Guidelines.7 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent best lab for the product offered shall be submitted by the contractor.