Municipal Administration And Water Supply Department Tender

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete complying with standard specification For Super Structure in GF.

Picking the Exsisting Plaster Walls

Plastering with cement mortar 1:3, 20 mm ,thick in allfloors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats with Oil bound Distember over one coat of wall primer(inner)

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.(outer)

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Paving the floor with design Rajasthan kotta tiles(colour and shade as directed) of size 610 mm x610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying and laying Rubberised interlocking Paver block M40 grade 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated single core unsheathed copper cable conductor cable of1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling ith MS accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for open power plug point

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with onstruction of masonary pedestal withsuitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylemsheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set

18W 4 Feet LED Fitting with LED

Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., Size for 75mm X 75mm X 75mm

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as perIRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Single Arrow Big Size 36" X 18"

Supply PVC 110mm Pipe

GI Pipe 25mm

GI Pipe Elow 25mm

GI Pipe Union 25mm

GI Pipe bend 25mm

GI Pipe Nipple 25mm

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)

GI Pipe 50mm For Flag

Add GST 18%