Municipal Administration And Water Supply Department Tender

Providing and laying bituminous concrete to 30mm thick using 0.13 cu.m of 19.00-9.50mm graded metal 0.17 cu.m of 9.50-2.36mm graded metal and 0.26 cu.m of 2.36mm & below metal by adding the shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27 kgs of hot bitumen VG 30 Bitumen (160 degree celcious) 60/ 70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminious concrete including the cost materials ( the cost of Municipality / Corporetion Plastic Waste obainted by the contractor from the Municipality / Corporation will be Recovered) and conveyence of all materials to C M P site, heating the bitumen and agregates to the required temperature and mixing the minimum required Temperature in central hot mix plant 20 - 30 tonnes capacity conveyeing the mix by tipper trucks to paver site, spreading the mix in requires temereature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver to site etc., including hite charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH revision 5

Providing Laying Hot applied thermoplastic compound 2.5mm thick including reflective glass beads @250gms per sqm area thickness of 2.5mm as per IRC :35.The finished surface to be level , uniform and free from streaks and holes all complete as per Technical specification and as directed by the Engineer-in-charge