Municipal Administration And Water Supply Department Tender

Supply and Delivery of 100 mm DI D/F Gate valves (Soft Seated) resilient seated softsealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindlenut, without gland packing and with 3 O-Ring protection on the shaft and seals ofNBR and the valves should be of vaccum tight and 100% leak proof with face toface dimentions as EPR BS 5163-89/ ISI 14846-2000 PN 1.0. All the valvesshould be with electrostatic powder coating both inside and outside with pocketless straight thro' body passage. All the valves are to be compatible for burriedapplication with pressure rating PN 1.0 and Supply, delivery of Ductile Iron Specials as Per IS 14846/2000 including unloading, transportation and stacking charges for fixing of valves with specials including labour charges for lowering, laying, jointing etc complete as directed by Engineer in Charge ( 5 Years Warranty).

Supply and Delivery of GI Specials etc., complete with standard specification. 100 mm GI Pipe

100 mm GI Flange set

100 mm GI Tee

100 mm GI Bend

Rubber sheet for Flange set

16 mm dia x 65 to 90 mm length fully threaded bolts and nuts with 2 nos.

Laying of 50 Sq.mm & 25 Sq.mm cable below GL including GL etc., complete with standard specification.

Supply,delivery and errection of 100 Amps TPN Switch with HRC fuses sheet steel double break etc., complete with standard specification.

Supplt and Delivery of 100 Amps Porcelain fuse unit (500 V Anchor / Equialent)

Supply and Delivery of 7.5 HP Star - Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC /Three Phase/50 HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65 mm), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break conductors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately) etc., complete with standard specification.

Suply,delivery of 56/0.3 (4 Sq.mm ) PVC Insulated and Sheathed Single Multi Strand Fire Retardant Flexible Copper Cable with ISI Mark conforming to IS Marking as directed by Engineer - in -charge.

Supply and delivery of open well submersible 30Hp - 1250LPM X 60m head pump set conforming to IS 14220/2002 and as amended thereafter and BEE 3 star Rated capable of discharging the following duties due to all casues. The pump shall be with stainless steel shaft and dyanamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. Yhe pump suitable for installitation in sump with 1.1 KV grade 3 core joints. The non- return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. Yhe pump should be directly coupled to 2880 RPM, three phase,50 Hz (5),415V+6% & 415V-15% aquirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air Break star delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation etc, complete as per standard specification.

Supply and delivery of open well submersible 5Hp - 150LPM X 60m head pump set conforming to IS 14220/2002 and as amended thereafter and BEE 3 star Rated capable of discharging the following duties due to all casues. The pump shall be with stainless steel shaft and dyanamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. Yhe pump suitable for installitation in sump with 1.1 KV grade 3 core joints. The non- return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. Yhe pump should be directly coupled to 2880 RPM, three phase,50 Hz (5),415V+6% & 415V-15% aquirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air Break star delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation etc, complete as per standard specification.

Provision for Goods and Service Tax @ 18%