Municipal Administration And Water Supply Department Tender

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with props , With all cost and conveyance of materials and labour charges etc., Complete as per standard speification.

Plain Cement Concrete 1:2:4 using 20mm size ISS HBG metal from approved quarry including all the cost and conveyance of materials to site and all labour charges etc., complete as per standard specification.

Plastering with cement mortar 1:4 (One part of Cement and Four part of Plastering Sand (P- Sand)) 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete complyingwith standard specifications (S.I 309)

Supplying , fabricating and placing in position of MS or RTS rods for cutting, bending ,straightening of rods and tying the grills for reinforcement with necessary binding wire including all cost and conveyance of materils to site with all labour cost etc., as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade (design mix) in accordance with IS 456 - 2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Q.dust but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.