Municipal Administration And Water Supply Department Tender

Supplying and erecting and centring for sides and soffits of plain surface including strutting, shuttering and ramming same etc. completed as per standard specification

Supplying, fabricating and placing in position mild steel of ribbed for steel bars for all RCC works including cutting bending, cranking, binding etc, including cost of binding wire MS chairs, laps to fix the reinforcement in all positions all labour and materials etc. complete complying with standard specification.

Removal of Surface excavated earth away from the site through tipper lorries to the places as shown by the departmental officers including loading, transporting to a lead of upto 3Km unloading,and leveling as directed by the departmental officers

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cemen

Plastering in cement mortar 1:4 mix, ( one cement and Four sand ) 20mm thick finishing, including cost and conveyance of all materials and labour charges etc,complete as per the standard specifications.

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying Bituminous concrete to 30/40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications