Municipal Administration And Water Supply Department Tender

Plain cement concrete in 1:4:8 (one cement four sand and eight aggregates) with 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc., complete.

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar, RCC slabs with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid.

Supplying and erecting shuttering with necessary supports for plinth beam with all cross bracings etc., Complete : (RCC Column footing plinth beam and lintel side) using steel plate and angles, S.I. No. 155 - 10 M2

Supplying and erecting centering for size and softest support for plain surface such as reinforced cement slap rectangular beams tee or L beams lintels bed blocks stair and landing slap landing beams, beams canopy etc., comp. in all any height (The retrieved materials should be taken back by the contractor).

Supplying fabricating and placing in position of MS grills for reinforcement rate including the cost of steel for all works (the rate to include cost of binding wire also)

Reinforce Cement concrete 1: 11/2 : 3 (One cement one and half sand and three aggregates) with 20mm gauge machine broken gauge hard broken granite chips including curing and finishing etc., complete for R.C.C. item excluding the cost of reinforcement grills in position and centering shuttering etc.

Brick work in CM 1:5 (one cement five sand) using 2nd class bricks in Foundation basement.

Brick work in CM 1:5 (one cement five sand) using 2nd class bricks in Super Structure in Ground Floor..

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Plastering with CM1:5(one cement and five sand) 12mm thick 1m2.

Plastering with CM1:3(one cement and three sand) 10mm thick 1m2.

Dadooring the sides of wall with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over abase layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications

Paving the floor with design Anti skirt ceramic tiles (colour and shade as directed) of size 305mmx305mmx6mm in all floors over abase layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement Colour

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour lSetin cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.5mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, A1 clips, Best double action floor springs, Aluminium Handles on both sides, floor stopper, Tower bolt, Locks and glass including all materials, Labour, Power consemption charges required for fabrication if necessary chipping, dismantlling making necessary holes in RCC columns, Beams or Mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections

Supplying and fixing UPVC (un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and sgutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi rubber (black colour) covered with over all the edges of frame and shutter the shutter will be providded with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging stroms and should have key lockable action. security protective hinges, strong locking systems and as per size for areesting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Vertical Blinds (Premium)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with primer including all costs such as welding, griding and fabrication charges, cost and conveyance of all materials to site etc complete as per standard specifications

Supply and fixing of PVC solid doors using 19gauge 19mm MS.Sq tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails, The steel tubes shall be covered with 5mm fixed in position including furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, Lock rail and bottom rail and bottom rail shall be 75mmx30mm. The over complete as per standard specification. (TWAD SOR Data--135)

Weathering Course concrete with broken brick jelly of 20mm gauge in pure slacked lime over roof slab including laying consolidating finishing etc., complete.

Finishing the top of weathering course with one course of pressed tiles of size 230 x 230mm laid in CM 1:3 12mm thick, mixed with water proofing compound and pointing with the same mortar mixed with red oxide etc complete.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m.

Supplying & delivery of fixing HDPE tank of 2000 it capacity as per IS 1207/1996 including loading&unloading transpoting & labour charges and fixing GI pipes & specials for pipe connections works including cutting threading and fixing charges etc., complete

Supplying and fixing in position white glazed European Water closet of best quality and approved make with 100mm 'P' os 'S" trap with double flapped rigit PVC seat cover with CP brass hinges with 12.5 liters PVC Low lwvwl flusing tank with all internal fittings etc., complete complying with standard specifications, labor inclusive of fixing low lwvwl flushing tank

Supplying and fixing in position Indian water closet of size 580X440mm, white glazed earthenware of approved quality with 'P' trap or 'S' trap confirming to IS:2556-PartXII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concretero of / floor slab and making good the disturbed portion to original condition with out leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin of size 550X400mm with a pair of castiron bracket, including cost of 15mm dia metre brass chromium plated piller tape, 32mm dia metre C.P. Waste union, 32mm dia metre P.V.C. waste pipe with rubber plug and chain, 15mm dia metre G.M. wheel valve, 15mm dia brass nipple, 15mm dia nylon connection setc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Wiring with 2x2.50 sq.mm PVC unheated SC Aluminium cable of 650 V grade in suitable PVC rigid pipes in wall or ceiling with PVC accessories with TW switch box in flush with wall covered by hylum sheet3mm thick and painting with suitable colour of 14 SWG TC wire for light point.

Supply and fixing of single box type 18Watts 4'Feet LED flu Fitting complete with wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. TWAD-DATA-P- 173 -SL No:

Supply and fixing of 6A/16A 3 pin combined flush type modular wall socket and 16A flush type modular switch concealed in suitable metal flush box in flush with wall and covered with suitable cover plate with frame

Supply and fixing of 20 Amps DP plug and socket in sheet steel enclosure with 32A DP MCB in flush with wall with earth connection (for AC plug) (SD-140)

Supplying and fixing of Orient make metallic colour 5star rated as per the BEE specifications 1200mm (48") sweep AC ceiling fan (Havells/Crompton /Usha/equivalent) with stepped electronic 300w regulator with 300mm down rod on the existing clamp etc.,

Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete

Supply and delivery and fixing GI pipes and specials as per is specification. 40mm UPVC Pipe

32mm GI Adapter

Borewell Clamp

Borewell Cover

Rope

32mm GI bend

32mm GI NRV

Labour charges for over head wiring from EB pole to pump room by fixing 32mm dia GI pipe to the required height over roof slap of pump room ads directed by EB authorities including fixing copper wire in four layers and inslulated with proper reels wire required MS clampset supp delivery and fixing of all materials such as bore well cover clamp set U kondi 7/20GI wire insulated reels 24 18 TW meter board 10x4 aorial board PVC Tape roll copperd earth plate GI bolt and nut with washer nutral linkPVC insulted copper wire (7/20 wire up to 10 HPm 7/16 wire above 10hp)1”PVC hose pipe 1” PVC clamp 25mm PVC encacing pipe 332AMPS fuse carroar 6no 10HP and 60 amps fuse carrier. (TWAD Data No.P-101

GST 18%