Municipal Administration And Water Supply Department Tender

Earth work Narrow excavation for foundation in ordinary soil with initial lead and lift etc., complete

Supplying and filling with clean river sand in layers of 15cm tk including watering and ramming to consolidation etc., complete

Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal for foundation and flooring including curing dewatering and all other labour charges etc., complete

Providing steel centering and shuttering with strutting arrangements for sides and soffits etc., complete

without strutting

For Column

with strutting

Supplying cutting, bending & tying in position of MS / RTS grills for RCC works including cost of steel & binding wire etc., complete.

Reinforced cement concrete 1:1.5:3 mix (one cement One and half sand & three 20mm metal) using 20mm ISS gauge HBBG metal including cost of all materials and labour charge but excluding cost of reinforcement and binding wire etc., complete.

for foundation and basement

upto 4.50m height etc.complete.

Brick work in cement mortar 1:5 (one cement and five sand) mix using country bricks of standard size 8 ¾” x 4 ¼” x 2 ¾ ” etc., complete.

for foundation and basement

upto 4.50m height etc.complete.

Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving to required slope and thickness etc., complete

Finishing the top with one course of pressed tiles of size 20cm x 20cm x 20mm size laid in cm 1:3 mix mixed with water proofing compound as per Indian standard 2% by weith of cement used and pointed with the same mortar etc., complete

Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete

Plastering with CM 1:5 mix 12mm thick etc., complete

Supplying and fixing solid core flush shutters both side teak wood ply of 35mm thick and necessary furniture fitting like aluminium altrop, hinges, tower bolts, door stopper, rubber bush etc including cost of materials and labour charges etc complete

Manufacturing,supplying & fixing in position Steel windows of MS sheet 20 gauge thick with openable shutter frame and shutter frame made out of steel section confirming to IS 7452/ 1990.The outer frames of windows made of Z section (F7D) of size 25 x 20 x 3 mm confirming to IS7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS7452/1990.The shutters are individual and each of them can be operated separately. Sash bars are made of 'T'section (T2) of size 25x22x3m, 2nos of sturdy hinges and one numbers of handle cum slatch of special type are fixed for with openable shutter. Suitable opening is left for its any operation. One number of adjustable stay with locking bracket of sufficient length shall be provided for each shutter 4 nos. of 40x40x3mm anngle hold fast 230mm length are welded to the outer frame at appropriate point.M.S square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings ,20gauge MS sheet is used for covering the shutter. Grill members are painted with one coat of primer. Also rate is inclusive of cost of all materials, labour charges for fixing, one coat of primer, welding charges transportations to the work site, loading unloading and all other incidental charges etc.,complete.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three M.sand ) 20mm thick laid in-situ and pointed with same coloured cement

Supply and fixing inposition of cuddapah slab of 50mmtk with machine cut edge on all sides except bottom line etc.complete.

Flooring with Stain free Nano polish Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete

Supplying and fixing of MS grill gate using suitable MS L angle flats including cost of material and labour charges for welding, cutting and fixing and also one coat of red oxide primer etc., complete

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24.

Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall, with 3mm thick hylum sheet cover for 5A 3 pin non inter locking flush type CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable color for concealed power plug point (SD-40)

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable color SD-65

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceilig with flu tube with PVC unsheather copper leads from terminals SD(88)

Supply & fixing of 1200mm AC ceiling fan complete set with steped electronic regulator with existing clamp SD no: 107.

White washing with 2 coats of best shell lime etc..omplete

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete.

Painting with black board paint of approved and high quality with two coats etc. complete.