Municipal Administration And Water Supply Department Tender

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of OLD (EXIXTING PAVER BLOCK) 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Earth work excavation for foundation in all soils and sub soils and to full depth as may be required except in rock requing blasting but inclusive of shoring, strutting and bailing out water whereever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15cm thick well rammed and consolidated and depositin the surplus earth with in the compound in places shown bythe departmental officers with an initial lead of 10m and lift of 2m and levelling the same etc completed complying with standard specifications and drawings.

Cement concrete 1:4:8 (one cement and four sand and eight aggregate) using 40mm Hard Broken granite stone jelly for RCC works etc., complete complying with standard specification and as directed by the departmental officers complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Cement concrte 1:2:4 mix ( one cement, two sand and four aggregate ) including the cost and conveyance of all materials and excluding the cost of steel and including the labour charges for mixing, laying of concrete and curing etc complete as per the standard specifications.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Brick Work in CM1:5 (one cement and five sand) mix using uniformaly well burnt country bricks of size 8 3/4" x 4 1/4" x 2 3/4". including curing etc., complete Upto Basement complying with std specification.

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick., in all floors etc., complete complying with standard specifications.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supply and fixing of 80 mm G I PIPES (MEDIUM) AS PER IS 1239/PART I/200 etc., complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply and fixing of PVC Coated GI Chain Link Wire Mesh, For Fencing (of all sizes) the rate is inclusive of the labour chargess for cutting and fixing with binding wire etc.complet. (As per Quotation)

Supply and fixing of LED outdoor fittings (light emitting diode) higher end cost and conveyance of all materials to site etc,complete as per standard specification.

30W LED Street Light Fitting with LED

80W LED Focus Light Fitting with LED

Supply and fixing of PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to is conveyance of all materials to site etc,complete as per standard specification.

168 / 0.45 (25 sq.mm.)

101 / 0.45 (16 sq.mm.)

Double Bracket for existing Pole 76.10mm OD x 3.65mm Thick x 4000mm Length as per Standard spection PWD SOR 2022-23 P.no 147

GST. 18% (CGST-9%, SGST-9%)