Municipal Administration And Water Supply Department Tender

Roof top turbine air ventilator

water proofing seal tap

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level etc., complete

Supplying and laying Glass Wool for insulation including necessary packing materials etc., complete

Supply and fixing of 65 INCH 24x7 SIGNAGE DISPLAY etc., complete

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete,

Supplying and fixing of SS Wall Cladding Supply and installation of Anutone / Tectum / Heradesign / Equivalent Brand of Acoustical Slim Wall Panelling of synth slim, polyfibre panels, core- pigmented, high-density, Synth PF rigid panels of size 1200 x 2400 x 9mm thick, volume density 210 - 230 kg / m3, weight 1.9-2.1 kg/m2 installed by using GI strut frame work system. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 25mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. Anutone (or) Equivalent Brand of strand, square edge, magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 10mm, density 400 kgs / m3, weight 8 kg /m2 are fastened to strut CC 50 cross channel with suitable fasteners. Longer edges of the panel should be perpendicular to strut CC 50 cross channel. Synth slim panels are then adhered to strand behind with stick S7 adhesive. The system is backlined with the acoustical infill SynthPF 500 gsm 50 thick. The systems to achieve noise reduction coefficient not less than 0.85 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of etc., complete

Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side.The boards shall have a special peforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and- grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge etc.,

GST 18%