Metropolitan Transport Corporation Chennai Limited Tender

Cond - Waste Rubber Materials (Air Balloon, Hoses, Fan Belt)

Cond - 7.50 x 16 Tube with Neck

Cond - Cord Board Box

Cond - 11.00 x 22.5 "B" Class Radial Tyre

Cond - Small Bus Self Motor

Cond - 7.50 X 16 Full Size Flap

Cond - Empty Plastic Barrel

Cond - Clutch Disc with Centre hub (assorted)

Cond - BSIII Fuel Pump Assembly

Cond - 11.00 x 22.5 "B" Class Radial Tyre

Cond - Used Grease in Barrel

Cond - Air Filters

Cond - Empty 30 Ltrs, 20 Ltrs, 4 Ltrs, 2 Ltrs & 1 Ltr Paint Tins

Cond - Steering Wheel (Bakelite Rubber Moulded)

Cond - Assigned Damaged Waste GI Small pieces

Cond - Open Metal Barrel

Cond - Wooden small cut pieces, Waste Plywood & Mica

Cond - 10.00 x 20 Full Size Flap

Cond - Tyre Clippings

Cond - Slack Adjuster

Cond - 10.00 x 20 "B" Class Radial Tyre

Cond - 10.00 x 20 "B" Class Radial Tyre

Cond - 10.00 x 20 "B" Class Radial Tyre

Cond - 10.00 x 20 "B" Class Radial Tyre

Cond - Tube Cut Pieces

Cond - Flap Cut Pieces

Cond - Tyre Buffing Dust (Available at Chrompet Tyre Plant)

Cond - Tyre Buffing Dust (Available at Chrompet Tyre Plant)

Cond - Tyre Buffing Dust (Available at Tondiyarpet Tyre Plant)

Cond - 10.00 x 20 Tube with Neck

Cond - 10.00 x 20 Full Size Flap

Cond - M.S. Angle, G.I. sheet , Flat & Silencer muffler etc.

Cond - Broken Spring Leaves

Cond - Brake Shoes (assorted) 123 No

Cond - Clutch Disc with Centre hub (assorted)

Cond - Gear box Counter shaft with gears (300 Nos)

Cond - Hydraulic Jack (Assorted) 47 Nos

Cond - Used Oil in 210 Lts Barrel

Cond - 12V 21P (150 Amps) Plastic Battery

Cond - 12V (200 Amps) Plastic Battery

Cond - Brass Rivet = 50 Kgs Cond - Brass Bush = 6 Kgs

Cond - Electrical Items :- 1)Celling Fan with Leaf - 62 Nos, 2) Wall mounting fan - 4 Nos, 3) Hand Drilling Machine - 8 Nos, 4) Hand Drilling Machine (Heavy duty) - 1 No, 5) Tree cutting machine - 1 No, 6) Hand drilling machine field coil - 7 Nos, 7) Hand drilling machine armature - 17 Nos, 8) Bosh Hand grinding machine armature - 15 Nos, 9) Bosh Hand grinding machine field coil - 6 Nos, 10) Bosh Metal cutting machine field coil - 3 Nos, 11) Bosh Metal cutting machine armature - 5 Nos

Cond - Electrical Items :- Wiper motor - 12 No, SS Armature - 8 No, Roter assly - 20 No, Brush gear - 40 No, Solinoid switch - 35 No, Relay coil - 50 No, Battery cut off - 15 No, EC Unit - 2 No, DC & DC converter - 2 No

Cond - Staff Car Items :- 1) Cooling Coil(Aluminium) - 2 Nos, 2) Cooler Condencer - 3 Nos, 3) Gear box MM540 - 1 No, 4) Master Cylinder - 7 Nos, 5) Master Cylinder (Iron) - 2 Nos, 6) Water Pump (Aluminium) - 1 No 7) Water Pump (Iron) - 2 Nos, 8) Wheel Hub - 1 No, 9) Steering Box MM540 - 1 No, 10) Crown Pinion - 1 No, 11) Piston with connecting rod - 12 Nos, 12) Piston - 3 Nos, 13) Connecting rod - 8 Nos, 14) Wheel Disc - 4 Nos, 15) Fly wheel ring - 4 Nos, 16) Clutch Cover Assly - 21 Nos, 17) Clutch Disc - 20 Nos, 18) Rotor - 33 Nos, 19) Shock Absorber - 10 Nos, 20) Oil pump - 2 Nos, 21) Bolero Fork - 5 Nos, 22) Clutch coller fork MM540 - 4 Nos, 23) Tie Rod End - 17 Nos, 24) Fly Wheel assly - 2 Nos, 25)Upper Arm Ball Joint - 18 Nos, 26) Lower Arm Ball Joint - 17 Nos, 27) Aluminium Wheel Cylinder - 7 Nos 28) Wheel Cylinder (Iron) - 9 Nos, 29) Alum. Manifold - 1 No, 30) Joint propeller Shaft - 7 Nos, 31) Release Bearing - 7 Nos, 32) Jeep Axle shaft - 9 Nos, 33) Bolero Axle shaft - 2 Nos, 34) Steering intermediate shaft - 3 Nos, 35) Rocker pinion - 2 Nos, 36) Solinoid switch - 27 Nos, 37) Solinoid piston - 37 Nos, 38) Bentex - 24 Nos, 39) Brake booster - 2 Nos, 40) Link rod - 4 Nos, 41) MM540 Jeep Gearbox top - 1 No, 42) Selfmotor front housing (Alu) - 23 Nos, 43) Selfmotor rear housing (Alu) - 15 Nos, 44) Alternator front housing (Alu) - 5 Nos, 45) Alternator rear housing (Alu) - 12 Nos, 46) Crank shaft - 2 Nos.