Karnataka Industrial Areas Development Board Tender

KSRB 5.2: Providing and constructing granite / trap size stone masonry in foundation with cement mortar 1:6, stone hammered dressed in courses not less than 20cms high, bond stones at 2m apart in each course including cost of materials, labour, curing complete as per specifications. Specification No.KBS 5.1.13 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 4-2.7: Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregate @ 0.70cum and fine aggregates @ 0.470cum, with superplastisisers @ 3lts conforming to IS 9103-1999 reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase,lintels,columns, including cost of all materials, labour, HOM of machinery, curing complete but excluding cost of reinforcement as per specifications. Specification No.KBS 4.1, 4.6 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 4.2.10: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 240kgs, with 12mm and down size graded granite metal coarse aggregate @ 0.05175cum and fine aggregates @ 0.0345cum, with superplastisisers @ 0.225lts, machine mixed, well compacted for plain chejja of 7.5 cms. average thickness, upto ground, floor level, inculdingcost of all materials, labour, HOM of machinery,finishing curing complete but excluding cost of reinforcement Specification No.KBS 4.1, 4.6 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 4-6.7:Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specification.up to 3.50 mfrom ground level Specification No. KBS 4.6.2 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 4-6.10: Providing and removing centering, shuttering, strutting, propping etc.,for chejjas, corbles etc., including edges, including cost of all materials, labour complete as per specificatiom. Specification No. KBS 4.6.2 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 4-9.2: Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete, as per design (laps, hooks and wastage shall not be measured and paid) cost of all materials, labour, HOM of machinery, complete as per specifications. MORTH Specification No. KBS 4.6.3 Fe500 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 6-2.4 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 50 Newton per sqmm with cement mortar 1:4 for basement and super structure including cost of materials, labour charges, scaffolding, curing, complete as per specifications. Specification No. KBS 6.2 with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 9.4-3 : Providing Matti/nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves(excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 35mm yhick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. (excluding cost of fixtures) with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel glazed windows & ventilators side hung/top hung 2/3 openable 1/3 fixed as per approved drawings usings using Z angles of 25x33x3mm, weighing 1.419 kg/m both for outer and inner frames and central mullion section of size 24x46x3mm, weighing 2.28kg/m all duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows, not more than 34cms. C to C including providing and fixing 4mm thick reeded glass with teakwood beading of required size, all steel sections should conform to I.S 7452:1990, 4nos of holdfasts of approved size, section should be cut to length welded grinded electrically subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be thoroughly cleaned free of rust and painted with one coat of anti-corrosive paint and finishing two coats of ready mix paint of approved colour and make including cost of matrials, fixtures, labour charges and HOM with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 14.10-1 : Flooring with 25mm to 40mm thick polished tandur blue Stone slabs using CM 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and levels and joined with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing all leads and lifts, polishing complete as per specifications. Specification No.KBS with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-3.3 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specifications. Specification No.KBS 14.16, 14.17

KSRB 15-3.14 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3 to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-7 : Providing lime rendering for plastering to wall and ceiling,including cost of materials, labour, curing complete as per specifications with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-14.1 : Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including prepering the surface even and sand paper smooth, cost of materials, labour, curing with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-16.1 : Providing and finishing external walls in two coats with water proof cementpaint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter , cost of materials, labour with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, curing with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 15-17.6 : Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an evan shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, curing with all lead and lift etc, as per specification and as directed by the Engineer in charge.

KSRB 8.6-5: Providing and fixing on wall surface 2.5kg/sq.cm H.D.P.E rain down water pipes 90mm outer dia approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing with all lead and lift etc, as per specification and as directed by the Engineer in charge.