Kamarajar Port Limited Tender

Supplying and filling with river sand/crusher sand in foundation and basement to a thickness of 150 mm, all as per the details shown in the drawings specified in the relevant schedules and as directed including watering, consolidating, labour, materials, tools, equipments etc., complete.

Brick work using bricks of class designation 50 in cement mortar 1:5 ( 1 Cement : 5 Coarse river sand) for foundation and basement all as per the details shown in the drawings and as specified in the relevant schedules and as directed, including, curing, all labour, materials, tools, equipments etc., complete.

Providing and fixing formwork using plywood or steel sheets in Foundations, footings, bases of columns, etc including necessary centering for alignment and levels in structures including strutting, shoring, bracing, propping, staging etc, keeping the same in position during the concreting and removal of the same after a specified period etc complete as per drawing and specifications and /or as directed at site including the cost of all materials, shuttering oil, labours, transportations & proper stacking at site, tools, equipment, lead, lift, etc complete. Note: (a) The shutter should be cleaned before each use if re-useable shutter are used. (b) The shutter to be used should give good surface finish. (c) Distorted shutters will be made good at once before put to use to the satisfaction of EPL. (d) The rate includes coating formwork with approved quality of non-staining mineral oil.

Supplying, transporting and fabricating HYSD bars and/or M.S. Plain bars and placing in position as reinforcement for all RCC members, as shown in the drawing including all handling, cutting, bending and tying with 1.25mm dia black annealed binding wire including all materials and labour, lifting, tools, equipments, etc., complete.

Preparing the surfaces of walls and providing plaster in cement mortar 1:5 (1 cement : 5 fine river sand) 12 mm thick all as per the details shown in the drawings ,as specified in the relevant schedules and as directed to the required finish including forming grooves with thread as required, curing etc., including all labour, scaffolding, tools, materials, equipments, etc., complete.

Preparing the newly plastered Exterior wall surfaces and Painting with two coats of ICI Dulax weather shield max paint or equivalent over one coat of ICI Dulax weather shield max primer of approved colour to give an even shade all as directed including all materials, labour, scaffolding, tools, equipments, brushes, etc. complete as per the directions of Engineer-in-charge

Providing and laying Anti skid Ceramic tile flooring in hall and wherever required using first quality of size 300mm x 300mm and of nominal thick (Johnson’s or equivalent) (or) nearest size of approved shade / colour, set in C.M 1:4 (1 cement: 4 fine river sand) 20mm average thick and fixing the tiles with neat cement slurry to required slope and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete as per the directions of Engineer-in-charge

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. For 0.63 mm thick zinc coating not less than 275 gm /sq m. etc complete.

Providing structural steel work using MS Cold finished RHS/SHS as per IS806 using hollow sections IS 4923/1997 , rivited , bolted or welded in built up sections trusses and framed work including cutting ,hoisting , fixing in position and applying two coats of approved paint over a approved steel priming coat including the cost of purlins, rafters, trusses, materials, labour, tools, equipments and transportation to site etc., complete

Providing and fixing MS Baseplate &gusset plate 20mm thick where ever necessory as per drawing including cutting ,hoisting , fixing in position and applying two coats of approved paint over a approved steel priming coat including the cost of materials, labour, tools, equipments and transportation to site etc., complete

Providing and fixing suitable MS bolts of 300mm length empeded in pedestal concreat and connecting with Hexagonal head bolts and nuts with suitable sizes at where ever necessary as per drawing applying two coats of approved paint over a approved steel priming coat including the cost of materials, labour, tools, equipments and transportation to site etc., complete