Kamarajar Port Limited Tender

Providing and laying GRANULAR SUB BASE (GSB) layer of required thickness on the prepared sub grade layer (I&II) including screening, spreading in uniform layer , watering and premixing at optimum moisture content, compacting with Power and Vibratory Rollers to achieve the desired density, and fine dressing to required grade including obtaining and transporting all materials from approved quarry site to work site with all lifts and lead by Mechanical Transport, head load or any other mode of Transportation,all as directed at site and as per relevant specifications and drawings including all labour, materilas ,tools, equipment, safety measures, testing and incidentals necessary to complete the work,etc., complete to the satisfaction of Engineer-in-charge.

.Preparing the existing sub grade/Sub base layers by dressing the surfaces to the required level, camber, watering, and consolidating by using smooth wheeled roller (8 to10 te. Capacity) as directed by the Engineer's representative at site to form the base for Bitumen pavement to the required levels and slopes all as specified under relevant schedules, drawings and as directed including all labour, equipments, transport, fuel etc complete o the satisifaction of the Engineer-in - charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) in the existing road portion to match the required level including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, complete all as directed at site and as per specifications/drawing including all materials, labour, tools, equipment, transport, fuel etc., complete. and satisfaction of Engineer-in-Charge.

Supplying and laying plain cement concrete Paving blocks of approved quality, design / shape and of size 200mm x 100mmx 80 mm for platform flooring to correct alignment and required gradient in approved pattern asdirected over a 50mm thick layer cushion of M sand/C.S sand and setting the blocks hand tight and compacting using a plate vibrator to bring out joints not more than 5mm wide between theblocks including brushing C.S sand in to the joints to fill the gapwherever required and vibrating again so as to achieve full interlock all as per relevant specifications including spreading C.S sand over newly paved surfaces all as directed at site of work including all materials, labour, tools, equipments et c., complete. NOTE :1.The paving blocks required for this work have to besupplied by the tenderer and the rate quoted shall be inclusive of cost of paving blocks

Dismantling the damaged precast concrete slabs and disposing the same within lead of 50 m all as specified and as directed, including handing over the retrived reinforcement to dept stores within 1 km lead including cost of labour, tools, stacking , transportation, loading and unloading, etc. complete and to the satisfaction of Engineer-in-charge.

Providing , casting and fixing at or near ground level precast cement concrete slab of size 2.30x0.30x0.20m in mix1:1.5:3 (1Cement;1.5 M/sand; 3graded stone aggregate 20mm nominal size) etc. as per the approved drawing and setting in position with cement mortar 1:3 (1 Cement : 3 Coarse sand) as per the approved drawing including the cost of labour, tools, material, placing, curing and required centering, shuttering complete and to the satisfaction of Engineer-in-charge.

Supplying, transporting,fabricating and placing in position TMT (Fe 500 grade) steel bars as reinforcements for all RCCworks wherever required including handling, cutting, bending and tying them in position with 1.25mm dia black annealed steel binding wire, etc., all as directed and as per drawing including reinforcement steel, binding wire and other materials, labour, tools,equipment etc., complete.to the satisfaction of Engineer-in-charge.

Lifting transporting and Placing the pre-cast concrete slabs of size 2.3x0.30x0.20m in position and level including transportation, tools, machinery, loading and unloading etc complete and to the satisfaction of Engineer-in-charge.