Indira Gandhi Centre For Atomic Research Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indira Gandhi Centre For Atomic Research - IGCAR Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Oct 2024
Closing Soon20 Nov 2024
Tender Amount₹ 1,91,03,000
Costs
EMD
₹ 3,82,060Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IGCAR_832116_1Tender No
CEG/IGC/2051/2024Tender Authority
Indira Gandhi Centre For Atomic Research ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling brick work in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead all as per specifications and directed by the Engineer-in-charge.
60
-
-
Demolishing Stone rubble masonry in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead as per direction of Engineer-in-charge.
15
-
-
Dismantling doors, windows and clear storey openings (Steel /wood) shutter at all levels including chowkhats, architraves, holdfasts etc. complete and stacking within 50m lead (Full windows) of area 3.00 sq.m and below all as per specifications and directed by the Engineer-in-charge.
25
-
-
Dismantling doors, windows and clear storey openings (Steel /wood) shutter at all levels including chowkhats, architraves, holdfasts etc. complete and stacking within 50m lead (Full windows) of area above 3.00 sq.m all as per specifications and directed by the Engineer-in-charge.
30
-
-
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling at all levels including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.
50
-
-
Dismantling of Structural steel columns / platforms and Stainless steel liners at all levels by manually / by mechanical means, including cutting and stacking of structural items and disposal of unserviceable materials within 100m lead as per specifications and directed by the Engineer-in-Charge.
8.5
-
-
Earthwork excavation by mechanical means (Hydraulic excavator) or manual means for foundation, substructures, plinth beam, cess pits & trenches, all kinds of foundation etc., in all types of soil like hard gravelly soil, sandy soil for the following depth from average ground level upto the required founding level, line and grades in both dry and wet conditions including shoring, strutting, bailing out of water if necessary, levelling and ramming the bottom of trenches, dressing of sides, stacking the excavated materials away from the edge of trenches, refilling the sides of foundation as required with selected excavated earth and depositing / disposing the surplus excavated earth (Disposed soil to be leveled by breaking clods, if any and neatly dressed and leveled) within the lead specified below all complete as per specifications and as directed by the Engineer-in-charge.
-
-
-
All kinds of soil with depth upto 1.5m below average Ground level and disposing surplus excavated earth upto a lead of 200 metres.
100
-
-
All kinds of soil with depth exceeding 1.5m but not exceeding 3m below average Ground level and disposing surplus excavated earth upto a lead of 200 metres.
40
-
-
Providing and laying plain cement concrete M20 grade with a minimum cement content of 320.00 kg/cum using 20mm maximum size graded aggregates including mechanical mixing, transporting and placing in required position, ramming, compaction, leveling, curing, shuttering, dewatering if any, complete all as per specification for leveling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications.
Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility
2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor.
3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.
10
-
-
Providing and laying cast insitu controlled reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine crushed graded stone aggregates and crushed stone sand including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for column footings, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other structural elements including dewatering wherever necessary (Formwork and reinforcement will be paid for separately) all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item.
Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility
2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor.
3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.
-
-
-
M30 grade with 370 kg. of cement per cu.m. of concrete for all floors
130
-
-
Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for precast plain solid units, slabs, exhaust fan moulds etc., in reinforced cement concrete of 1:2:4, using 20mm and below machine crushed graded stone aggregate and crushed stone sand including weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork & moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by the Engineer-in-charge.
5
-
-
Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel conforming to IS:1786 'SAIL or VIZAG or approved equivalent make' and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by the Engineer-in-charge at all lifts.
Note: The rate shall be including the cost of reinforcement steel. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see point 7 of Section VIII, General Information for Guidance of Tenderers.
12
-
-
Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces. Shuttering with plywood panels alone will be permitted.
260
-
-
Conveying the surplus excavated earth, broken materials, debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineer-in-Charge.
Note: 1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil, @ 30% in respect of debris and @ 50% in respect of Rock from the corresponding Stack / Truck measurements.
2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road.
-
-
-
Lead charges for lead Exceeding 4 kilometre but not exceeding 5 kilometre
300
-
-
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge.
Note: Lifting device arrangements if any required shall also be arranged by the contractor at his own cost.
20
-
-
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like trusses, purlins etc. using MS hollow / circular / square / rectangular tubular sections including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge.
Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.
0.5
-
-
Providing Structural steel work in M.S Plain Plates and chequrred Plates in Embedded Parts, Trench Covers, Connection plates etc. including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc. including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Structural steel plates to be used shall be of approved make.
1
-
-
Providing and fixing M20 MS anchored bolts of length 150mm with a thread length of 75mm butted including nuts and washers of approved size, quality and make as per requirements as per specifications and drawings complete all as directed at site by the Engineer-in-Charge.
55
-
-
Supplying and erecting structural steel including cutting to required sizes of mild steel sheet (min. thickness 1.0 mm) metal decking from approved make including cutting to required sizes at an elevation of +3.325m level over purlins, fixing to purlins all as per manufacturers specifications, including bolt connection / welding, including under deck painting with two coats of 250 micron DFT Epoxy paint / polyurethane paint on exposed surface and as directed by the Engineer-in-Charge.
190
-
-
Supplying, providing, fixing Neoprene sheet 10mm thick of approved quality, suitable shape as mentioned in the drawing and specification. Cost to include preparation of surface, supply of necessary tools, scaffolding, manpower etc., at all levels as per drawings, specifications and as directed by the Engineer-in-Charge.
25
-
-
Providing 8mm thick welding of Reinforcement steel rods and all the procedures shall be followed as per (IS 9417 & IS 815) at all elevation including scaffolding complete all as directed by the Engineer-in-Charge.
25
-
-
Grouting the base plates / pedestal joints using shrinkage resistant grouts like ‘CERA GROUT 40/Conbextra GP2/Ultratech Power Grout or approved equivalent’ of required consistency with a pressure of 1kg/sqm or by manufacturer's specification at all levels. The rate inclusive of cost of grout material, pumping machine, labour charges etc complete as directed by the Engineer-in-Charge.
200
-
-
Providing and fixing mechanical bolts anchored in to RCC beams, columns and slab to a required depth of 150mm to 250mm by using "Hilti make "ANCHOR ROD HST3 M12" anchor fasteners bolts at all elevation including drilling, fixing in position inclusive of all machinery and man power, scaffolding and as per specification and as directed by Engineer-in-Charge.
130
-
-
Dismantling old weather proofing materials such as brick bat coba or foam and screed concrete at all levels and cleaning the surface including disposal of rubbish to the dumping yard within 50 metres lead all as per specifications and directed by the Engineer-in-charge.
45
-
-
Providing and laying cement based water proofing treatment with a course layer of broken bricks of various sizes to an average thickness of 100mm over a 20mm thick bed of cement mortar 1:5 using crushed stone sand mixed with water proofing compound, plastering the top layer 12mm thick in cement mortar 1:5 using crushed stone sand, mixed with waterproofing compound, finished smooth with thread marking at 300mm squares (South India water proofing or equivalent, ratio to cement shall as per manufacturer specification or 2% to be adopted) Note: Suitable guarantee for 10 years is to be provided for this work. This work has to be executed as per the specification and direction of the Engineer-in-charge.
290
-
-
Providing screeding with 1:2:4 screed concrete with 10mm down aggregate admixed with crystalline based integral water proofing admixture CERA CRYSTALLINE INTEGRAL / SIKA / Fosroc or equivalent @ 0.8% by weight of cement to an average thickness of 75mm.
30
-
-
Providing and constructing haunching of size 100mm X 100mm using CC 1:3:1 using 6mm down graded chips admixed with CERA LATEX SBR @ 1kg per 50kg (1 bag) of cement as specification and as directed by Engineer-in-Charge.
80
-
-
Providing and constructing brick masonry at all lifts using well burnt stock bricks in cement mortar 1:5 using crushed stone sand including suitable scaffolding, raking out joints, curing complete as per specifications and drawings for foundation, superstructure, etc. for the following floors.
-
-
-
for Basement and Ground Floor
40
-
-
First floor
40
-
-
Providing and constructing at all floors and lifts 115mm thick brick work in cement mortar 1:4 using crushed stone sand and using well burnt stock bricks including providing and placing in position 2 nos of 8mm dia rods at every 4th layer, scaffolding, curing, racking out the joint on both faces etc. complete all as per specification and as directed by the Engineer-in-charge.
-
-
-
for Basement and Ground Floor
250
-
-
First floor
175
-
-
Providing plastering to the internal surfaces of brickwork/concrete at all elevations in cement mortar 1:5 using crushed stone sand, 12mm thick finished with a floating coat of neat cement including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.
1250
-
-
Providing plastering to the external surfaces of brickwork/concrete at all elevations in cement mortar 1:5 using crushed stone sand, 20mm thick in two coats including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.
500
-
-
Providing, fabricating and fixing hand rail using 304 grade Stainless Steel pipes, Square sections etc. of approved size and make and quality by cutting to required size, welding, mirror / matt polishing , fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications complete. A sample to be fabricated and to be got approved by the Engineer-in-Charge before starting of work at site. This work to be executed through approved specialized agency.
350
-
-
Providing and applying white cement based wall putty (Birla wall car or approved equivalent) over concrete or plastered surface, two or more coat to get uniform surface, free from undulation including clearing complete all as directed by the Engineer-in-Charge.
1250
-
-
Providing and applying painting Two coats at all levels with premium Plastic emulsion paint (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of cement primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.
1250
-
-
Providing and applying painting Two coats on rough cast plaster surface at all levels with Acrylic emulsion paint (ACE or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.
2000
-
-
Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (fittings, Glazing and panelling shall be paid for separately)
Note : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
2750
-
-
Supplying, fabricating, installing, placing and securing in position steel grills for windows comprising of square bars / MS flats as per detailed drawing including cutting, bending to shape, welding, painting with two coats of synthetic enamel paint of approved colour over one coat of primer complete all as per specification and drawings.
800
-
-
Providing and fixing partition with 12.5mm thick tapered edge gypsum moisture resistant board at all height including the cost of painting one coat primer and two coats of emulsion paint of approved colour, all as per manufacturer’s specification and also including the cost of making cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge.
725
-
-
Supply and fixing of 50mm thick, 16kg/cum density Rock wool covered with white tissue complete all as directed by the Engineer-in-Charge.
725
-
-
Providing and fixing false ceiling with 12.5mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm or both sides of joint and including the cost of painting one coat primer and two coats of emulsion paint of approved colour, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge
210
-
-
Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Mineral Fibre Reinforced Factory applied Vinyl painted "ARMSTRONG" Ceiling tiles or approved equivalent make & pattern, Tiles having 16/15mm thick, and approved surface Design and edge Profile (TEGULAR or Equivalent ) placed in a suspended Grid of size of 600x 600mm made of Hot-dipped G.I steel sections having an exposed surface capping of Pre-finished baked polyester painted coil wherein the main tee of size 24x32x1200mm shall be suspended at 1200mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. The cross tees of size 24x27x1200mm shall be inserted in to slots between the main Tees at 600mm centres and thereafter in direction vertical to the longer TEEs, cross Tees of size 24x25x600mm shall be inserted to form a grid size of 600x600mm resting on the Perifery walls on wall angles of size 24mmx24mm including providing necessary openings for light fixtures, diffusers, Trap doors etc to be made as per layout Drawings and as per directions of Engineer-in-Charge. The main Tees to be suspended from the ceiling / Soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. The entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m. Only False Ceiling area will be Measured for the Purpose of Payment.
200
-
-
Providing and fixing glazing 6mm thick tinted colour Float glass pane in aluminium doors, window, ventilator shutters and partitions etc. with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge.
65
-
-
Providing and fixing glazing with 5mm thick clear Float glass pane in aluminium doors, window, ventilator shutters and partitions etc. with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge.
12
-
-
Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate.
6
-
-
Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts "Everite / Hardwyn" or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge.
15
-
-
Providing and fixing 4 Lever Dead/Mortice Lock ‘Godrej/Everite’ or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings.
20
-
-
Providing and fixing factory made solid PVC/FRP doors "Sintex/Saisatyam doors/ Venture fibre" approved equivalent make door shutters with door frames of approved colour/ shade 30 mm thick, with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners, including all accessories & fittings like 3nos of 100mm good quality of approved SS hinges, 2 nos of 125mm grip PVC bow handles, 2nos of PVC 75mm baby latch for each door complete all as per manufacturer recommendation and as directed by the Engineer - in -charge.(Door sample has to be got approved before bulk purchasing)
10
-
-
Providing and fixing of Hollow metal steel door at all levels from certified Manufacturer. All hollow metal general doors with or without vision panel/louvers shall be of Pressed Galvanised steel Double or Single leaf to required sizes of approved make Shakti Hormann or approved equivalent which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277.
Note: 1.Door frame shall be Single rebate profile of size 100 x 57 mm made out of 1.20mm thick galvanized steel sheet (18 gauge). Frames should be Mitered and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement slurry if recommended on the clear masonry opening. 2. Door leaf should be 46mm thick fully flush double skin door with or without vision panel as per requirement. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanized steel sheet. The internal construction of the door should be rigid with steel stiffeners / pads and reinforcement. The infill material shall be resin bonded honeycomb core. All doors should be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hinges, mortice locks, and including door closer Make HARDWYN or DORMA. The edges should be interlocked with lock seam. For pair of doors astragals will be provided as required. 200x300mm Vision lite with 5mm thick clear toughened glass with sealant in each shutter wherever applicable should be as per joinery details with a screw on glass beading on the inside. Louvers when recommended should be site proof and shall be flush fixed on the external surface. 3). All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250hours of salt spray test. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule and as directed by Engineer-in-Charge. The door shall be dispatched after the approval of the pre-dispatched inspection by the Engineer-in-Charge. 4) Hardware fittings for Double / Single Leaf Door (i) Dorma BB4330 SS Ball Bearing Butt Hinges 100x75x3 (ii) Dorma Dead Lock Both side key cylinder (iii) Dorma SS 304 Grade Pull handle 22mm Dia Length 300mm Pair (iv) Dorma Door Closer TS 68 with standard arm silver finish (v) Ryobi Concealed Flush Bolt body RB 10 (vi) Rod for Ryobi Flush Bolt RB 10 length - 265mm (vii) Float glass clear 5mm thick w 200mm x H 300mm (viii) Single adhesive monarch seal 4mm. 5) Submission of shop Drawing is in the scope of contractor. 6) Payment will be made based on clear structural openings.
-
-
-
Steel door with Double leaf with Equal or unequal leaf with 2nos of vision panel and all required accessories/hardware set.
20
-
-
Steel door with Single leaf with Louvers at bottom and all required accessories/hardware set.
4
-
-
Providing and fixing Venition vertical blinds of Luxaflex or approved equivalent make and approved colour pattern with vanes of 100mm width made up of non woven polyester fabric which are suspended from the silt travelers by self aligning vanes hooly of effective optimized system, vanes shall be coupled together by means of bead chain pivotally attach by closing to each side of each weight and other accessories required complete all as per directed by the Engineer-in-charge.
Note: 1. Sample shall be got approved before commencing work.
2. The above work shall be got executed from approved manufacturers.
70
-
-
Providing and fixing VITRIFIED floor tiles in different sizes with water absorption less that 0.08% and confirming to IS 15622 of Marbonite or approved make in all colours and shades in Glossy or Matt or satin finish (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 using crushed stone sand (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 using crushed stone sand) including machine/hand cutting to required size & shape, grouting the joints with white cement mixed with coloring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications.
Note: The sample tile shall be got approved by the Architect/Engineer before procurement.
-
-
-
In flooring, vitrified tile fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand.
300
-
-
In Dados and skirting laid over 12mm thick backing in cement mortar 1:3 using crushed stone sand.
20
-
-
Providing and fixing of Vitronite full body Vitrified slab tile of 'Johnson/Kajaria/Somany' or equivalent (thickness to be specified by the manufacturer) size mentioned below with water absorption less than 0.08% and conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3) including machine/hand cutting to required size & shape, grouting the joints with white cement mixed with coloring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications.
Note:- The sample tiles has to be got approved by the Architect/Engineer-in-charge before procurement.
-
-
-
In flooring, Vitronite full body Vitrified slab of 'Johnson/Kajaria/Somany' or approved equivalent of size 800mmX2400mm with 20mm thick bedding in cement mortar 1:4.
220
-
-
In Dados and skirting to match with floor tiles of Vitronite full body Vitrified slab of 'Johnson/Kajaria/Somany or approved equivalent' laid over 12mm thick backing in cement mortar 1:3.
30
-
-
Providing and fixing 1st quality ceramic glazed floor/wall tiles conforming to IS 15622 of Kajariya/NITCO/Somany or approved equivalent of size specified below of approved shade and colour by Engineer-in-charge/Architect, free from cracks, fissures & flakes with straight edges & perfect corners fixed at right angles as per design and pattern required over a bed of 20mm thick bed of cement mortar 1:4 (in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3), including machine / hand cutting to required size and shape, pointed neatly with white cement mixed with coloring pigment to match colour of tile, properly finished in all respects, including providing and fixing PVC corner beading / nosing of approved quality and colour at the corners and edges of the ceramic tiles dadooing including finishing and embedding in the wall curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete.
-
-
-
In flooring of size of 300mm X 300mm fixing with 20mm thick bedding with cement mortar 1:4 of Anti skid ceramic tile of Kajariya/NITCO/Somany or approved equivalent.
35
-
-
In Dados and skirting of size up to 450mm X 300mm laid over 12mm thick backing in cement mortar 1:3 of Ceramic glazed wall tile of Kajariya/NITCO/Somany or approved equivalent.
160
-
-
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete in all respects as per clause 401 of MoRT&H specifications for road and bridge works (4th revision or latest) and as directed by the Engineer-in-Charge for following.
-
-
-
for Grading-II material
30
-
-
Providing and fixing PVC rain water downtake pipes conforming to IS:13592 Type A and PVC SWR Fittings & specials confirming to IS:14735, ‘Finolex’ or other approved equivalent make of pipes, fittings & specials including jointing with seal ring / with PVC solvent adhesive including fixing in walls/columns using clamps, anchor fasteners, bolts and teakwood packing pieces, joint testing etc. complete all as per drawings, specifications and as directed by the Engineer-in-Charge.
-
-
-
PVC SWR Rain water pipe 160mm outer dia
80
-
-
Providing and fixing Unplastisized PVC (UPVC) pipes in trenches/open pipeline work having thermal stability for hot & cold water supply (as ASTM Standard ASTM D 1785, Sch - 40 Grade) including all UPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing / under ground. This includes jointing of pipes & fittings with UPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge.
-
-
-
15mm UPVC pipes
20
-
-
20mm UPVC pipes
50
-
-
25mm UPVC pipes
25
-
-
Providing and laying the following sizes PVC water supply line with 'Finolex / Varun / Truebore' or approved equivalent make PVC pipes suitable for 6 kg/sq.cm pressure and specials confirming & marked to IS:4985 including jointing with PVC jointing compound, laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reduces, coupler, reducing bushes, threaded adaptor, elbow, tail pieces, caps etc., and testing the line as directed by the Engineer-in-Charge.
-
-
-
40mm outer dia PVC pipe
25
-
-
63mm outer dia PVC pipe
50
-
-
110mm outer dia PVC pipe
25
-
-
Providing and fixing Cast Iron Nahani Trap / Floor Trap of 100mm inlet and 75mm outlet, (weighing 5.80 Kgs each), jointing with Lead with the connection pipes, placing as per the drawings, including embedding in cement concrete 1:2:4 using crushed stone sand and making circular hole up to floor level using 110mm O/D PVC pipes of 6 Kgs / sq.cm pressure and fixing 1 No 125mm dia C. P Brass Grating , complete all as specifications and drawings and as directed by the Engineer-in-Charge.
10
-
-
Providing and constructing Gully Chamber of internal size 300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates, crushed stone sand and constructing the above chamber with 115mm thick brick work in cement mortar 1:4 using crushed stone sand with well burnt chamber bricks, plastering over both internal and external faces of brick work with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design complete all as per specification and as directed by the Engineer-in-Charge.
2
-
-
Providing and Construction of Inspection chamber of following size internally upto 1.00metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 using crushed stone sand with necessary brick carbelling as required, plastering with cement mortar 1:3 using crushed stone sand, 12mm thick finished smooth with a floating coat of neat cement inside chamber and with cement mortar 1:5 using crushed stone sand, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 using crushed stone sand for foundation concrete forming bencing in PCC 1:2:4 using 20mm maximum size graded aggregate and crushed stone sand etc. complete all as per specification, drawing and as directed by the Engineer-in-Charge.
-
-
-
Inspection chamber of internal size 600x600mm
1
-
-
Providing and fixing coloured Vitreous Indian water closet of Orissa pattern W.C. pan of size 580x440mm with integral type foot rest with 100mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15mm Inlet connection with all fittings and fixtures, 15mm stop cock, complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed at site. (colour as directed by the Engineer-in-Charge)
1
-
-
Providing and fixing coloured vitreous china European type Water Closet with 'P' or 'S' Trap with ISI marked colour solid seat and lid of Hindware or Equivalent approved make, 10 litre low level colour PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Flush bend , fixing EWC with C.P Brass screws, 15mm PVC heavy quality inlet connection of 600mm long, stop cock, including testing, commissioning & cleaning etc. complete all as per drawings and specifications and as directed at site.
4
-
-
Providing and laying approved quality mirror polished Granite slabs for flooring & Skirting of required size & specified colour, pattern and free from cracks, fissures & flakes with straight edges & perfect corners laid at right angles as per pattern over a bedding of cement mortar 1:4 using crushed stone sand, 20mm thick (or backing of cement mortar 1:3 using crushed stone sand, 12mm thick as mentioned below) pointed neatly with white cement mixed with colouring pigment to match colour of slab and finished in all respects, including machine / hand cutting to required size and shape, moulding and polishing of exposed edges, fixing stone to level and plumb, anti-skid grooves for steps, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete.
Note: The sample Granite slab shall be got approved by the Architect/Engineer before procurement.
-
-
-
In flooring 18mm thick Granite slab fixing with 20mm thick bedding in cement mortar 1:4 using crushed stone sand.
5
-
-
Providing and fixing 5mm thick first quality mirror of required size with anodized aluminium section frame work of size 30 x 20mm, backing the mirror with 4mm thick AC plain sheet painting two coats of plastic emulsion paint over a coat of primer, fixing the entire unit on the wall surface with necessary screws etc. complete all as directed by the Engineer-in-Charge.
3
-
-
Providing and fixing liquid soap dispenser in PVC container "SDR-WHT-DJ001 F- JAQUAR" or approved equivalent make with all accessories including necessary screws for fixing complete all as directed by the Engineer-in-charge.
4
-
-
Providing and fixing Heavy Quality C.P. brass 15mm dia long body Bib cock “Jaquar continental / Parryware coral model” or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge)
5
-
-
Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50metres flexible hose (Hand Shower) of “Jaquar continental model” or approved equivalent make and type complete all as per specifications and as directed by the Engineer-in-Charge (Samples to be got approved by the Engineer-in-Charge)
5
-
-
Providing and fixing Heavy Quality C.P. brass 15mm dia Two Way Bib cock “Jaquar” or approved equivalent as per specifications and as directed by the Engineer-in-Charge. (Samples to be got approved by the Engineer-in-Charge).
5
-
-
Providing 18mm thick particle board with teak wood beading of 18x12mm size all around for cupboard shutters including cutting to required size & shape, fixing in position etc. complete for cupboard shutters etc. as directed by Engineer-in-charge.
360
-
-
Providing and fixing lamination sheet of formica greenlam, 1mm thick of approved shade, pattern & colour of ‘Green lam lamination’ or approved equivalent, including cutting to required size and shape, pasted over plywood or particle board using synthetic resin adhesive of fevical SR 998 G or Dunlop’s 758 glue of approved make complete all as per manufactures specifications and as directed by Engineer-in-charge.
720
-
-
Providing, manufacturing and fixing in position drawer for tables etc. made out of second class teakwood planks of 12mm thick, supported over suitable heavy quality drawer slides with necessary recess type powder coated handles and locking arrangement of approved make and quality all complete as shown in the drawing.
18
-
-
Providing and fixing Stainless steel Piano hinges ISI marked IS:3818 of overall width 35mm, fixing with necessary stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-Charge.
70
-
-
Providing and fixing anodised aluminium tower bolts of size 100x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-Charge.
100
-
-
Providing and fixing Chromium plated Brass handles 75mm with plate 125x32mm including fitting with necessary chromium plated brass screws complete all as per specification and as directed by the Engineer-in-Charge. Sample to be approved by the Engineer-in-Charge.
275
-
-
Providing and fixing Magnet catch for shutters with required sizes of screws for fixing complete all as per specification and as directed by the Engineer-in -Charge. Sample to be approved by the Engineer-in-Charge.
100
-
-
Providing and fixing Multipurpose lock of ‘Godrej’ or other approved equivalent make with a pair of keys complete all as per specification and as directed by the Engineer-in-charge.
250
-
-
Providing and fixing Viterious china white wash basin Jaquar CNS - WHT-705 under counter basin of size 590x420x200 or other equivalent approved make , 32mm Heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting holes on the granite slab and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge.
6
-
-
Providing and fixing 8mm thick clear glass of ‘SAINTGOBAIN’ make or approved equivalent make including buffing the edges, all round border with etched edges and fixing with suitable teakwood beading / cleats / clamps all complete as directed by the Engineer-in-charge.
8
-
-
Providing & Fixing 12mm thick plywood in position including cutting to the required size & shape complete etc. as directed by Engineer in charge.
60
-
-
Providing and laying approved quality Granite slabs of leather finish for flooring & Skirting of required size & specified colour, pattern and free from cracks, fissures & flakes with straight edges & perfect corners laid at right angles as per pattern over a bedding of cement mortar 1:4, 20mm thick (or backing of cement mortar 1:3, 12mm thick as mentioned below) pointed neatly with white cement mixed with coloring pigment to match colour of slab and finished in all respects, including machine / hand cutting to required size and shape, moulding and polishing of exposed edges, fixing stone to level and plumb, anti-skid grooves for steps, curing, cleaning the surface neatly at the time of handing over the area, all materials and labour complete.
Note:-The sample Granite slab shall be got approved by the Architect/Engineer-in-charge before procurement.
-
-
-
In Ramp area and steps, minimum 18mm thickness as approved by Engineer/Architect of Granite slab leather finished with / without anti-skid grooves of required and as instructed patterning & moulding and polishing of exposed edges, fixing with 20mm thick bedding in cement mortar 1:4. The granite slab shall be single length to match step length.
50
-
-
Providing and Fixing Homogeneous PVC sheet, 2mm thick, conforming to IS:3462 latest edition in flooring and skirting (Polyfloor or approved equivalent make) in approved pattern, colour & shade on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S -758, or Fevicol SR 998, or approved equivalent including cleaning & preparation of surface, levelling small undulations with plaster of paris if required , rolling with light wooden roller weighing about 5 kg all complete all as per specification and as directed by the Engineer-in-Charge
Note: The sample tile shall be got approved by the Architect/Engineer before procurement.
10
-
-
Providing and fixing mechanical bolts anchored in to RCC beams, columns and slab to a required depth of 150mm to 250mm by using "Hilti" make "ANCHOR ROD HST3 M10" anchor fasteners bolts at all elevation including drilling, fixing in position inclusive of all machinery and man power, scaffolding and as per specification and as directed by Engineer in charge.
100
-
-
Supply, embedment testing and commissioning of the following DB with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires. (MS item will be measured separately). (Refer Sec VI, Clause No.15.2).
-
-
-
16 WAY Cat No:DBTPI016DD (Vertical) or equivalent make TPN TIER Per Phase Isolation (PPI) DB
4
-
-
Supply fixing testing and commissioning of the following RCCBs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
RCCB DP 63A, 30mA, TYPE AC
12
-
-
Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
40-63Amps, FP MCB (TYPE-C)
4
-
-
6-32 Amps, DP MCB (TYPE-C)
96
-
-
Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11).
-
-
-
MS fabrication 1 coat primer & 2 coats synthetic enamel paint
100
-
-
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)
-
-
-
3/3.5/4core X Upto 25 sqmm
100
-
-
End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).
-
-
-
4 Core X 16 Sqmm
8
-
-
Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8)
-
-
-
8SWG copper wire
100
-
-
Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, in Floor, Walls, Brick, Block Masonry, etc. including chasing & replastering as per the detailed specification. .(Refer Sec VI, Clause No.27).
-
-
-
25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes
1500
-
-
Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm HRPVC insulated & sheathed copper flexible cables of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2).
-
-
-
300 mm Dia Turbo Heavy Duty Exhaust Fan
5
-
-
Supply and Installation of following sizes of Surface Mounting Plastic Boxes as per the detailed specification. (Refer Sec VI, Clause No.15.6).
-
-
-
Surface Mounting Plastic Boxes 12 Module
52
-
-
Surface Mounting Plastic Boxes 3 Module
6
-
-
Surface Mounting Plastic Boxes 1/2 Module
47
-
-
Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).
-
-
-
One/Two module
37
-
-
Primary Points: Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18)
-
-
-
Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm (22/0.3) copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm (36/0.3) copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including supply of 10 Amps modular switch.
32
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm (36/0.3) Copper wires for Phase, Neutral and Earth from MCB Distribution Board to Power point including supply of modular plate, one No. of 16A modular switch & one No. of 6/16 Amps combined shuttered type Socket and Three Numbers of 10A modular switch & Three numbers of 3 pin, 6A shuttered type Socket, Modular plate.
36
-
-
Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm (22/0.3) Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm (36/0.3) Copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 10A modular switch.
3
-
-
Secondary Points: Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW/Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18)
-
-
-
Wiring for Light Points with 2 Runs of 1.5 Sq.mm (22/0.3) copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm (36/0.3) copper wire for Earth from Switch Box to Primary light/sensor/fan point through Control Switch Box including supply of 10Amps modular switch.
5
-
-
Wiring for Light point with 2 Runs of 1.5 Sq.mm (22/0.3) Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm (36/0.3) Copper wire for Earth (Approx. average length of each wire is 5 m) from Light point to Light point /sensor/contactor
76
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm (36/0.3) Copper wires for Phase, Neutral and Earth from power point to Power point including supply of modular plate, one No. of 16A modular switch & one No. of 6/16 Amps combined shuttered type Socket and Three Numbers of 10A modular switch & Three numbers of 3 pin, 6A shuttered type Socket, Modular plate.
16
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm (36/0.3) Copper wires for Phase, Neutral and Earth from power point to Power point including supply of modular plate, one No. of 16A modular switch & one No. of 6/16 Amps combined shuttered type Socket
6
-
-
Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm (22/0.3) Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm (36/0.3) Copper wire for Earth from Power point through Control Switch Box including supply of 3-pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 10A modular switch.
2
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). Catalogue No : RC380B LED36S-6500 L60W70 PSU OD 31W-3400lm or equivalent and Lamp Type LED
64
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). Catalogue No : DN 295 B LED 10S - 6500 PSU WH S2 or equivalent and Lamp Type LED
29
-
-
Overall rebate (Optional)
-
-
-
INR Zero Only
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%