Indira Gandhi Centre For Atomic Research Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indira Gandhi Centre For Atomic Research - IGCAR Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date17 Dec 2024
Closing Date21 Jan 2025
Tender Amount₹ 2,48,80,000
Costs
EMD
₹ 4,97,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Revamping Of Electrical System Of Cdo Building At Igcar, Kalpakkam.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IGCAR_840037_1Tender No
IGC/ESG/ESD/T1699/2024Tender Authority
Indira Gandhi Centre For Atomic Research ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Wall mountable Distribution panel. Dwg. No. IGC/ES/EL/CDO-014 (Sheet 3 of 4)
11
-
-
... More
Power Distribution panel- MDB-5. Dwg. No. IGC/ES/EL/CDO-014 (Sheet 4 of 4)
1
-
-
... More
Supply, open installation, testing and commissioning of the following sizes of VTPN DBs on MS frame work as per the scope of work. MS frame will be measured separately.
(Refer Sec VI, Clause No.15.1).
-
-
-
... More
DB VTPN 8 Way (8 Plus 24) IP 43 - IK 09 Cat No:507727 or equivalent with 1 no. 125A,4P MCB incomer and 8 Nos. 63A,3P MCB outgoings.
5
-
-
... More
Supply, open installation, testing and commissioning of the following DB with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires. MS item will be measured separately. (Refer Sec VI, Clause No.15.2).
-
-
-
... More
12 WAY TPN TIER Per Phase Isolation (PPI) DB with all accessories. Cat No:DBTPI012DD (Vertical) or equivalent.
11
-
-
... More
10 WAY TPN TIER Per Phase Isolation (PPI) DB with all accessories. Cat No:DBTPI010DD (Vertical) or equivalent.
7
-
-
... More
12 Way SPN Distribution Board with all accessories. Cat No:DBSPN012DD or equivalent.
5
-
-
... More
Supply, open installation, testing and commissioning of the following sizes of cable end termination box on MS frame work as per the scope of work. MS frame will be measured separately.
(Refer Sec VI, Clause No.15.1.15).
-
-
-
... More
TPN,10 way Cable end box, Cat No:DBTPI010DD or equivalent suitable for TPN, 10 way TPN TIER Per Phase Isolation Distribution Board Cat No:DBTPI010DD (Vertical)
7
-
-
... More
TPN,12 way Cable end box, Cat No:DBTPI012CB or equivalent suitable for TPN, 12 way TPN TIER Per Phase Isolation Distribution Board Cat No:DBTPI012DD (Vertical)
11
-
-
... More
SPN, 12 way Cable End Box, Cat No:DBSPN012CB or equivalent suitable for SPN 12 Way DB cat No: DBSPN012DD
5
-
-
... More
Assembling, installation, testing and commissioning of MCB DB enclosure already installed/embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3).
-
-
-
... More
SPN, 12/16 Way or TPN 4/6 Way Distribution Board
5
-
-
... More
TPN, 10 Way Distribution Board
7
-
-
... More
TPN, 12 Way Distribution Board
11
-
-
... More
Supply and external installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc. as per the detailed specification. (Refer Sec VI, Clause No.27).
-
-
-
... More
40mm dia. 2mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes.
200
-
-
... More
32mm dia. 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes.
500
-
-
... More
25mm dia. 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes.
1200
-
-
... More
25mm GI Flexible Hose
150
-
-
... More
Supply and providing GI conduit downrod for installation of luminaries, fans etc as per the detailed specification.
(Refer Sec VI, Clause No.16.5).
-
-
-
... More
20mm dia GI conduit
150
-
-
... More
Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.
(Refer Sec VI, Clause No.29)
-
-
-
... More
38 X 16 mm size of PVC Mini trunking
200
-
-
... More
25 X 12 mm size of PVC Mini trunking
300
-
-
... More
20 X 12 mm size of PVC Mini trunking
930
-
-
... More
Supply and installation of 80 X 50 mm size of U-PVC trunking on wall/ceiling for routing of Power, Lighting & Telephone wires including all the required accessories like joints, flat angle,junctions, External & Internal angle, partition separation and end cap as per site requirements. Make: Legrand, Model: DLP (Refer Section V)
1000
-
-
... More
Supply, Installation, testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
... More
6-32 Amps, SP MCB (Type-C)
656
-
-
... More
40-63 Amps, FP MCB (TYPE-C)
18
-
-
... More
Supply, Installation, testing and commissioning of the following RCBOs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
... More
RCBO DP 32A sensitivity 30mA TYPE AC, 2 Module
59
-
-
... More
Supply, installation, testing and commissioning of the following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket as per the detailed specification. MS item will be measured separately.
(Refer Sec VI, Clause No.15.4).
-
-
-
... More
1 Phase, 20A Metal Clad socket box with 20A DP MCB
20
-
-
... More
Supply and Installation of following sizes of Surface Mounting Plastic Modular Boxes as per the detailed specification.
(Refer Sec VI, Clause No.15.6).
-
-
-
... More
1/2 Module box
20
-
-
... More
4 Module box
10
-
-
... More
6 Module box
20
-
-
... More
8 Module box
80
-
-
... More
12 Module box
75
-
-
... More
Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).
-
-
-
... More
One/Two module
20
-
-
... More
3 Module
10
-
-
... More
4 Module
10
-
-
... More
6 Module
20
-
-
... More
8 Module
80
-
-
... More
12 Module
100
-
-
... More
1 Modular dummy plate
50
-
-
... More
Supply and Installation of following Wiring Accessories as per the detailed specification.
(Refer Sec VI (MNC), Clause No.5).
-
-
-
... More
1 No. 10A Switch on modular plate and termination of wires to the switches
200
-
-
... More
1 No. 16A Switch on modular plate and termination of wires to the switches
200
-
-
... More
1 No. 6A, 3 Pin shuttered type Socket on modular plate and termination of wires to the switches
200
-
-
... More
1 No. 6/16A, 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches
200
-
-
... More
Supply & Installation of Power point with one way 20A modular switch (5734 10), 6/16 Amps combined shuttered type Socket (5734 71) and one way 6A modular switch (5734 00)& 5 pin, 6A shuttered type Socket (5734 24), 6 Modular frame & Plate (0109 61) suitable for fixing in legrand DLP truncking. Make : Legrand, Model : Arteor or equivalent. (Refer Section V & Section VI (MNC) Clause 5)
560
-
-
... More
Supply, transportation, installation, testing and commissioning of the following Sensors as directed by the Engineer-in-Charge. (Refer Sec VI, Clause No.16).
-
-
-
... More
Dual tech Ceiling mounted sensor having both PIR and ultrasonic sensing elements 90M2 or equivalent. (Refer Sec VI, Clause No.16.3).
10
-
-
... More
Supply, transportation, installation, Configuration, testing and commissioning of Surface/Recess mountable type Occupancy & day light PIR SWITCH CORRIDOR sensor suitable for lighting load coverage 2mtr wide and 12mtr length on both sides as directed by the Engineer-in-Charge. Sensor Model No. 488 17 or equivalent.
(Refer Sec VI, Clause No.16.3).
14
-
-
... More
Supply, transportation, installation, testing and Commissioning of the following types of luminaires. (Refer Sec VI, Clause No.16.1).
-
-
-
... More
Suspended luminaires. Catalogue Name : CANE STD LINEAR PENDANT 30W, 5700K-4 feet.
Lamp Type : LED
Item code: LPC0103057NDWEP0DL4C01 with Stainless steel rope fixing accessories or Equivalent.
490
-
-
... More
Surface mounted luminaires.
Catalogue Name : WAND K 30W 5700K-4 feet-PRIME.
Lamp Type : LED
Item code: SLWKY03057NDWEP04C22 -SURFACE LIGHTS NON DIM WITH CUSTOMIZED CLAMP OF 30 DEG. TILT WHITE (PC). or equivalent.
40
-
-
... More
Recess mounted luminaires.
Catalogue Name : Moon V2 STD 15W 5700K
Lamp Type : LED
Item code: DRM0S01557NDWEP or Equivalent
98
-
-
... More
Recess mounted luminaires.
Catalogue Name : FULLLIT SQ STD 30W 5700K - 2ft x 2 ft
Lamp Type : LED
Item code: PRF0003057NDWEP or equivalent
120
-
-
... More
Surface mounted luminaires.
Catalogue Name : WAND K 9W 5700K - 2 Feet Batten
Lamp Type : LED
Item code: SLWKB00957NDWEP0002C01 or equivalent
18
-
-
... More
Surface mounted luminaires.
Catalogue Name : Moon V2 STD 12W 5700K
Lamp Type : LED
Item code: SLM0S01257NDWEPSTDSTDC10 or Equivalent
53
-
-
... More
Supply, Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade, XLPE insulated, Stranded Copper conductor armoured cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification. (Refer Sec VI, Clause No.3)
-
-
-
... More
4 CORE X 10 Sq.mm, 1.1kV grade -2XYWY CABLE
400
-
-
... More
4 CORE X 16 Sq.mm, 1.1kV grade -2XYWY CABLE
500
-
-
... More
Supply, Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade, XLPE insulated, Stranded Copper conductor armoured cables of following sizes Direct in ground including, excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc., as required as per the detailed specification. (Refer Sec VI, Clause No.3)
-
-
-
... More
4 CORE X 10 Sq.mm, 1.1kV grade -2XYWY CABLE
100
-
-
... More
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.
Note: Cable will be issued free of cost by the department.
(Refer Sec VI, Clause No.3)
-
-
-
... More
3/3.5/4core X Upto 25 sqmm
250
-
-
... More
3/3.5/4Core X above 25 & up to 120 sqmm
600
-
-
... More
3/3.5/4Core X above 120 & up to 240 sqmm
150
-
-
... More
3/3.5/4Core X above 240 & up to 400 sqmm
50
-
-
... More
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number 1.1 KV grade PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required.
Note: Cable will be issued free of cost by the department.
(Refer Sec VI, Clause No.3)
-
-
-
... More
3/3.5/4 Core X upto 25 Sqmm
125
-
-
... More
3/3.5/4 Core X above 25 to 3/3.5/4 Core X up to 120 sqmm
200
-
-
... More
3/3.5/4CX Above 120 Sq.mm but not exceeding 3.5/4CX 240 sq.mm
150
-
-
... More
3/3.5/4Core X above 240 & up to 400 sqmm
125
-
-
... More
Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5)
-
-
-
... More
3/3.5/4 Core, upto 25 Sqmm
100
-
-
... More
3/3.5/4 Core, Above 25 & Upto 120 Sqmm
150
-
-
... More
3/3.5/4 Core, Above 120 & Upto 240 Sqmm
200
-
-
... More
Retrieval of the existing one number of 1.1 kV grade PVC/HRPVC/XLPE insulated and PVC sheathed power cable of following sizes laid direct in ground including Removal of end termination, excavation of trenches, retrieving of bricks and back filling as per the detailed specification.(Refer Sec VI, Clause No.5)
-
-
-
... More
3/3.5/4 Core upto 25 Sqmm
50
-
-
... More
3/3.5/4 Core Above 25 & Upto 120 Sqmm
150
-
-
... More
3/3.5/4 Core Above 240& Upto 400 Sqmm
100
-
-
... More
Relaying of one number 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches on walls, poles and through embedded pipes using the retrieved spacer & clamps as per the detailed specification. Note: Cable will be supplied by department as free issue item. (Refer Sec VI, Clause No.6)
-
-
-
... More
3/3.5/4C X Upto25sqmm
100
-
-
... More
End Termination of the following size Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).
-
-
-
... More
4C x 10 Sq.mm including cable gland earthing
36
-
-
... More
4C x 16 Sq.mm including cable gland earthing
54
-
-
... More
End termination of 1100 Volts Grade XLPE/PVC insulated, Copper control cables of the following sizes using Single Compression, Heavy Duty, Siemens type Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Dowell's or equivalent make Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for the completion of the work. (Refer Sec VI, Clause No.10.1).
-
-
-
... More
10C X2.5Sqmm
6
-
-
... More
End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).
-
-
-
... More
4 Core X 16 Sqmm
10
-
-
... More
3.5/4 C x 35 sq.mm
27
-
-
... More
3.5/4C x 50/70 sq.mm
35
-
-
... More
3.5 x 185 sq.mm
8
-
-
... More
3.5 x 400 sq.mm
4
-
-
... More
Supply and installation of Following Sizes of sheathed flexible cables in Walls, Floors, Built in Trenchesas per detailed specification.(Refer Sec VI, Clause No.12.5).
-
-
-
... More
1100V sheathed Flexible Copper Conductor PVC cable size 4 Core x 4 Sq.mm
50
-
-
... More
Supply, installation, testing and commissioning of the following Raychem make Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of following sizes as specified. Excavation will be measured separately (Refer Sec VI, Clause No.10.6).
-
-
-
... More
Straight Through Joint (Crimping type) for 3.5 Core, 25- 50 Sq. mm
4
-
-
... More
Straight Through Joint (Crimping type) for 3.5 Core, 70-95 Sq. mm
5
-
-
... More
Straight Through Joint (Crimping type) for 3.5 Core 120- 185 Sq. mm
6
-
-
... More
Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.
(Refer Sec VI, Clause No.18)
Dwg. No. IGC/ES/EL/CDO-013 (Sheet 1 to 7)
-
-
-
... More
Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 1 no. 10 Amps modular switch.
120
-
-
... More
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to switch box and further to Light point including 1 no. 10 Amps modular switch
5
-
-
... More
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 no. 10 Amps modular switch
175
-
-
... More
Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 no. 10 Amps modular switch and 1 no. step type Fan regulator
170
-
-
... More
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor
175
-
-
... More
Wiring for Exhaust fan point up to 3 Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including supply of 3 pin 6A shuttered type Socket, 2 nos. 2 Modular plate and 1 no. 10A modular switch.
10
-
-
... More
Wiring for Primary Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase, Neutral and Earth from MCB Distribution Board to existing Power point through Control Switch Box.
160
-
-
... More
Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase, Neutral and Earth from Control Switch Box to control switch box
80
-
-
... More
Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket.
10
-
-
... More
Wiring with 1 Run of 1.5 Sq.mm Copper wire
500
-
-
... More
Wiring with 1 Run of 2.5 Sq.mm Copper wire
1500
-
-
... More
Wiring with 1 Run of 4 Sq.mm Copper wire
300
-
-
... More
Supply, installation, testing and commissioning of Push button control station with ON/OFF buttons for remote operation of motors as per the specification. Make: Schneider or equivalent. (Refer Sec V)
6
-
-
... More
Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm PVC insulated & FRLS sheathed copper flexible cable of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2).
-
-
-
... More
300 mm Dia Turbo Heavy Duty Exhaust Fan
15
-
-
... More
Supply, installation, testing and commissioning of following sizes of Wall Mounting Fans as per the detailed specification.. (Refer Sec VI, Clause No.17.4).
-
-
-
... More
400 mm Dia. wall Mounting fan
15
-
-
... More
Supply, Installation, testing and commissioning of following sizes of BLDC ceiling Fans suitable for electronic regulator for speed adjustment and safety steel rope with 3 Core, 1.5 Sq.mm flexible copper cable including earth connection. Supply and fixing of regulator is not included in the scope of this item. (Refer Section V & Sec VI, Clause No.17.1).
-
-
-
... More
1200mm Sweep, 220 cmm, 32W, 5 Star rated BLDC ceiling fan
100
-
-
... More
Installation of Ceiling /Exhaust /Air circulating fans in the labs/buildings/high bay as per the scope of work. (Refer Sec VI (MNC), Clause No.6).
-
-
-
... More
Fans upto 5mtrs height
75
-
-
... More
Plate Earth Electrode
-
-
-
... More
Supply, installation and testing of Copper Plate Earth Electrode as per IS: 3043 including Excavation, RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1001/1 & IGC/ESD/5060/1008/1. 50 kg. each Bentonite & Charcoal shall be provided for each earth pit.
(Refer Sec VI, Clause No.12.1 & 12.2).
5
-
-
... More
Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8)
-
-
-
... More
8SWG copper wire
300
-
-
... More
Supply, fabrication and installation of the following size of Copper Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. (Refer Sec VI, Clause No.12.7).
-
-
-
... More
25X3 mm Copper flat
50
-
-
... More
Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats Direct-in Ground including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9).
-
-
-
... More
50 X 6 mm GI flat
200
-
-
... More
Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9).
-
-
-
... More
50 X 6 mm GI flat
200
-
-
... More
Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25).
-
-
-
... More
2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength of 30kV RMS, Insulating Mat confirming to IS:15652
20
-
-
... More
Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.
(Refer Sec VI, Clause No.11).
-
-
-
... More
MS fabrication 1 coat primer & 2 coats synthetic enamel paint
1500
-
-
... More
Supply, installation of the following size of GI Ladder type Cable Tray and other accessories on wall, poles, etc., as per site condition and the detailed specification. (Refer Sec V Part-A & Section VI)
-
-
-
... More
450 (W) x 100 (H) mm x 2 mm thick, 300 mm rung spacing
50
-
-
... More
Supply and open installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10).
-
-
-
... More
150(W)X150(H)X80(D)mm, 1.6mm thick sheet MS Box
80
-
-
... More
200(W)X200(H)X120(D)mm,1.6mm thick sheet MS Box
80
-
-
... More
300(W)X300(H)X120(D)mm,1.8mm thick sheet MS Box
35
-
-
... More
400(W)X300(H)X200(D)mm, 1.8mm thick sheet MS Box
30
-
-
... More
Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification.
25
-
-
... More
Plain Cement Concrete.(Refer Sec VI, Clause No.26)
-
-
-
... More
1:2:4 Plain Cement Concrete
5
-
-
... More
Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2)
20
-
-
... More
Supply and installation of following sizes of PLB HDPE pipes in Built-in -trench as per detailed specification. (Refer Sec VI, Clause No.4.1 & 4.3).
-
-
-
... More
Supply and installation of 50/42mm HDPE Ducts in Built in trench for routing of Power /Telephone Cables as per the detailed specification.
50
-
-
... More
Supply and installation of Hume Pipe Direct in ground. (Refer Sec VI, Clause No.8.1).
-
-
-
... More
Supply and installation of 150 mm Dia. 2 Mtrs Long, NP 2 Class Hume Pipes at a depth of 1200 mm including supply of Collars and fixing them with 1:1 cement mortar and curing, including excavation in all types of soil, backfilling complete as directed by Engineer-in-Charge.
20
-
-
... More
Removal of 415V industrial type panel from CDO building,loading, transportation and unloading the panel to storage yard/central stores including removal of Power cables connected with the panel. (Refer Section V)
11
-
-
... More
Removal of various sizes of MS box / switch box from the wall / panel (Refer Sec VI (MNC), Clause No.19).
207
-
-
... More
Removal of various sizes of surface mounted GI/ PVC Conduit from wall/column/beam and transportation to storage yard (Refer Sec VI (MNC), Clause No.19).
1000
-
-
... More
Removal of 1.5 or 2.5 or 4 sq.mm aluminium wire from concealed/ Exposed PVC / ERW / Flo-coated Metal conduits on roof or wall conduits as per the detailed scope of work.(Refer Sec V Part A)
20000
-
-
... More
Removal of ceiling/Wall mounting/Exhaust fans of following sizes in labs/building/high bay/toilet in IGCAR (Refer Sec VI (MNC), Clause No.19).
-
-
-
... More
Fans Up to 5 Mtrs height
200
-
-
... More
Removal of the following from 415 Volts switch boards (Refer Sec VI (MNC), Clause No.19).
-
-
-
... More
63A/100A/125A, 500V, TP/TPN/SFU/ Combination SFU or 4/6/8/12 Way SPN DB or 4/8 WAY TPN DBs
30
-
-
... More
Removal of light fixtures. (Refer Sec VI (MNC), Clause No.21).
-
-
-
... More
Removal of light fixtures in labs and low bay areas
790
-
-
... More
Temporary installation of VTPN / TPN DB as directed by Engineer-in-charge.
(Refer Sec V Part A)
15
-
-
... More
Temporary laying of LT cables of following sizes in open air / in Built in trench. (Refer Sec VI (MNC), Clause No.30).
-
-
-
... More
Sizes up to 3.5C X 70 Sq.mm Aluminium conductor (Refer Sec VI (MNC), Clause No.30).
300
-
-
... More
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number of armoured PIJF 0.63mm dia Telephone cable of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Note: Cable will be issued free of cost by the department). (Refer Sec VI, Clause No.3)
-
-
-
... More
Upto 20 Pair
100
-
-
... More
Wiring and termination for Telephone point with 1 Run of 0.6 mm dia, 250 V grade PVC insulated, twin twisted,Two pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including of supply of Telephone wire. (Refer Sec VI, Clause No.18)
-
-
-
... More
Wiring with 1 Run of Twin twisted, Two pair (0.6mm dia.).
3500
-
-
... More
Supply and installation of two modular box with two modular plates suitable for fixing telephone socket of reputed brand. (Sec VI, Clause No.15.6 & 15.7).
150
-
-
... More
Supply and Installation of RJ-11 socket 1 Gang with shutter for information outlet and termination of 1 Run of data Cable.
300
-
-
... More
Supply and external installation of following sizes of Heavy Duty, PVC circular rigid Conduits for Electrical & Communication System with required Solid Long Bends, Couplings, GI Wire etc, as per the detailed specification.(Refer Sec VI, Clause No.27).
-
-
-
... More
25mm dia., 2mm wall thickness PVC heavy duty round rigid conduits with 50mm deep Junction boxes.
270
-
-
... More
32mm Dia, 2.5mm wall thickness PVC heavy duty round rigid conduits with 50mm deep Junction boxes.
320
-
-
... More
Supply & installation (Embedment in concealed) of wall mountable powder coated MS telephone distribution boxes of different sizes with SS KRONE Base module, Cable entry, lock and key provision. (Ref. Sec V & Sec VI, Clause No.15.10).
-
-
-
... More
500(W)x300(H)x150(D) MS Box. (for 100 pair)
6
-
-
... More
500(W)x400(H)x150(D) MS Box-(100L+100R =200 pair)
1
-
-
... More
750(W)x500(H)x150(D) MS Box - (100x2L+100x2R = 400 pair) (Note: L - Left side Krone base, R- Right side Krone base fixing)
1
-
-
... More
900(W)x750(H)x150(D) MS Box - (100x3L+100x3R = 600 pair) (Note: L - Left side Krone base, R- Right side Krone base fixing)
1
-
-
... More
Termination of the following sizes of PVC Sheathed, jelly filled, Flat/wire armoured PIJF UG Cable using Single Compression, Heavy Duty Gland connecting the cable to the equipment Telephone DBs etc. The rate shall include the cost of supply of Cable Gland. The Contractor shall arrange for drilling of holes wherever necessary for the completion of the work. (Refer Sec VI, Clause No.10.2).
-
-
-
... More
Upto 20 Pair.
8
-
-
... More
Above 20 & upto 50 Pair
16
-
-
... More
Above 50 & upto 100 Pair
4
-
-
... More
Retrieval of the already laid one number Telephone cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination, GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5)
-
-
-
... More
Above 20Pair to Upto 50Pair
100
-
-
... More
Supply and installation of Krone LSA PLUS disconnection Module and krone tool. (Ref Sec V).
-
-
-
... More
Supply and installation of Krone LSA PLUS disconnection Modules 2/10 ADC LSA Plus (10 pair each)_Product part ID: 6089 2 011 – 02D at HASL building at IGCAR site as per the scope of work. (Ref Sec V).
200
-
-
... More
Supply and installation of Krone insertion tool to terminate and cut wire on all disconnection modules. Product part no.6089 2 003-00.
2
-
-
... More
Supply and installation of the following telephone accessories: (Ref Sec V).
-
-
-
... More
Push button analog telephone instruments with line cord, spring cord and rosettee box.
80
-
-
... More
CLIP telephone instruments with line cord spring cord and rosettee box.
70
-
-
... More
Jumper wire (colour: Red/white & Blue/white) for telephone connection.
500
-
-
... More
Removal of existing False ceiling including disposing, cleaning and depositing the debris with in a distance of 50 metres etc. as directed by Engineer.-in-charge.
1600
-
-
... More
Refixing of existing False ceiling including necessary fixtures such as bolt and nuts etc. for the completion of the work and as directed by the Engineer-in charge
750
-
-
... More
Providing and painting White washing one coat on ceiling surface at all levels with lime to give an even shade as per specifications including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-Charge.
10
-
-
... More
Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Mineral Fibre Reinforced Factory applied Vinyl painted "ARMSTRONG" Ceiling tiles or approved equivalent make & pattern, Tiles having 16/15mm thick, and approved surface Design and edge Profile (TEGULAR or Equivalent ) placed in a suspended Grid of size of 600x 600mm made of Hot-dipped G.I steel sections having an exposed surface capping of Pre-finished baked polyester painted coil wherein the main tee of size 24x32x1200mm shall be suspended at 1200mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. The cross tees of size 24x27x1200mm shall be inserted in to slots between the main Tees at 600mm centres and thereafter in direction vertical to the longer TEEs, cross Tees of size 24x25x600mm shall be inserted to form a grid size of 600x600mm resting on the Perifery walls on wall angles of size 24mmx24mm including providing necessary openings for light fixtures, diffusers, Trap doors etc to be made as per layout Drawings and as per directions of Engineer-in-Charge. The main Tees to be suspended from the ceiling / Soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. The entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m. Only False Ceiling area will be Measured for the Purpose of Payment.
550
-
-
... More
Supplying and fixing Armstrong make false ceiling tiles making cutout for light fittings and other electrical fixtures and necessary bolt and nuts etc. complete as directed by the Engineer-in charge .The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in black colour and with a web height of 45 mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. All connection between sections should have pullout strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per Sqm etc., all complete and as directed by Engineer-in-charge.
320
-
-
... More
Conveying the surplus excavated earth & debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineer-in-Charge.
Note:
1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil and @ 50% in respect of Rock from the corresponding Stack / Truck measurements.
2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road
-
-
-
... More
Lead charges for lead Exceeding 3 kilometre but not exceeding 4 kilometre
25
-
-
... More
Providing and fixing false ceiling with 12.5mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230mm c/c,including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm or both sides of joint and including the cost of painting one coat primer and two coats of emulsion paint of approved colour, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge
60
-
-
... More
Dismantling brick work in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead all as per specifications and directed by the Engineer-in-charge.
10
-
-
... More
Providing and constructing brick masonry at all lifts using well burnt stock bricks in cement mortar 1:5 using crushed stone sand including suitable scaffolding, raking out joints, curing complete as per specifications, drawings and as directed by the Engineer-in-charge for foundation, superstructure, etc.
5
-
-
... More
Providing plastering to the internal surfaces of brickwork/concrete at all elevations in cement mortar 1:5 using crushed stone sand, 12mm thick finished with a floating coat of neat cement including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.
20
-
-
... More
Providing and applying painting Two coats at all levels with premium Plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty, scaffolding complete all as per specifications and as directed by the Engineer-in-charge.
750
-
-
... More
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge.
Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.
0.5
-
-
... More
Supplying and fixing stainless steel mesh suitable for wooden reapers in both sides including all fixtures complete all as per directed by the Engineer-in-charge.
25
-
-
... More
Providing, fixing and grouting with Cera inject SS, fixing non returnable packer in to the roof slab to a depth of 30 mm for grouting purposes including injection packer, packer connector, labour for packing fixing, labour for packer grouting and applying Cera inject SS of 1.14 g/cc and Cera inject LV plus of 1.04 g/cc mixing in ratio of 1:1 and having a pot life upto 6 to 8 hours for arresting roof leaks, low roof leakages, underground sump leaks at various elevations including all machinery , tools, manpower, necessary scaffoldings and as per specifications and as directed by the Engineer-in-Charge.
Note:
The consumption of grout material measured for bill is the actual quantity of intake during grouting. Wastages during grouting process and other wastages are not considered for measurement.
10
-
-
... More
Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313 for post Anti-termite treatment to existing buildings as per manufacturers specifications and as directed by the Engineer-in-Charge. Work to be executed by M/s Pest Control (India) or any other approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of Guarantee. (Over all Plinth area shall be measured and paid for), all complete as per specification and as directed by the Engineer-in-charge.
50
-
-
... More
Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make conforming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (Fittings, glazing and panelling shall be paid for separately)
Note:
1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
360
-
-
... More
Removing and refixing the door & window shutters/ frames, false ceiling, glass partition, shifting of all damaged materials including necessary repair works like planning, replacing the damaged wooden frames/styles including replacing worn out screws with new one all complete as directed by the Engineer-in-charge.
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%