Indira Gandhi Centre For Atomic Research Tender

Providing, laying, jointing and fixing medium Class GI screwed pipes bearing with ISI mark conforming to IS:1239, TATA or approved equivalent make of following sizes with specials including cutting to the required length, threading and jointing with white lead joining compound etc., complete for water supply lines, suction and delivery lines of pumps, laying and fixing of pipes masonry walls or RCC columns with wooden plugs and clamps and chasing the walls including cost of all the specials (Such as coupling, nipple, tee, bend, elbow, reducer, union etc.) and testing the line, painting the pipe lines with two coats of synthetic enamel paint of approved colour and make over a coat of primer etc. complete all as per specification and as directed by the Engineer-in-Charge. Note: Earthwork excavation and making flanged joints will be paid separately under relevant items.

40mm n/b G.I pipe

50mm n/b G.I pipe

Maintenance of lawns, flower beds, hedges, trees etc., in garden area (Non- sprinklers area) by watering at regular intervals, cutting and trimming hedges, and the unwanted growth of grasses as and when required including running lawn mover, removing weeds, collecting the cut grass, fallen leaves of trees and disposing the same at dumping yards shown by the department, watering the trees inside the garden area complete all as per specifications and as directed by the Engineer-in-charge. Note: 1. The rate shall include the cost of hire charges of lorry and labour for transporting of cut grass, leaves etc., to the dumping yard. 2. The rate shall also include cost of all tools, plants, water delivery hose required for gardening etc. 3. The rate quoted shall be per Sq.m. area maintained per month. 4. Contractor has to make his own arrangement for Lawn Movers. If departmental lawn movers is available it will be provided by department on chargeable basis. 5. If lawn mover is not used, then recovery at the rate as mentioned in specification will be levied as penalty from RA Bill. 6. The contractor shall engage minimum 1 person for 1500 sq. m /day throughout the month as directed by Engineer-in-charge. Failure to employ the above minimum numbers of labour will attract penal clause as per additional special condition of contract attached with the tender for every default of labour. 7. Cutting plants should be handed over to nursery for sampling by the contractor as directed by the Engineer-in-charge. 8. The contractor shall supply the PPE to the garden labour and they should wear the PPE during their working hours.

Supply and spreading of Fertilizer (urea), neem cake including cost of fertilizer and neem cake etc., all as per specification for Orchard plants / trees at the rate of 0.01kg/Sqm for fertilizer and 0.005kg/Sqm of neem cake, all as directed by the Engineer-in-charge.

Collection, supply and spraying of pesticides / fungicides / growth regulators in the lawn area and hedges by sprayer etc., including cost of collection, supply and spraying of pesticides / fungicides /growth regulators etc., all as per specification.

Collection, supplying and stacking of Decomposed dry farmyard manure without undesirable materials, stacking the same to at places as shown by Engineer for taking pre measurements including spreading the same at places shown with a lead upto 100metres and filling in pits etc., complete all as per specification and as directed by the Engineer-in-charge.

Supply and spreading of Vermicompost including cost etc. all as per specification and as directed by the Engineer-in-charge.

Sweeping and Cleaning the road surfaces including water table, road junction & pavement on both sides of roads in DAE Nodal centre complex area two times in a Month and when and where ever required including collecting upto 200m and stacking swept material for disposal upto 4km and as directed by the Engineer-in-Charge. Note: 1. Every time cleaning area shall be measured for payment 2. The contractor shall engage minimum 2 numbers of workers daily as directed by the Engineer-in-Charge. Failure to deploy the minimum number of labour will attract recovery with the minimum wages for every default of labour as mentioned in specification. 3. The rate should also include sweeping tools etc. 4. The contractor shall supply the necessary PPE to the workers. 5. The rate shall include the cost of hire charges of lorry and labour for transporting of sweeping materials to the dumping yard.

Cleaning the storm water drain when and wherever required including collection of all unwanted leaves, small plants, silt and other unwanted debris etc. upto initial lead 200m and stacking for disposal upto 400m lead at place specified by Engineer, all complete as directed by the Engineer-in-Charge.

Width above 450mm upto 1000mm wide with cover slab

Watering for landscaping activities inside DAE Nodal centre complex using tractor with tanker of capacity ranges 5000 to 6000 litres with lead upto 4 km, including required labour complete all as directed by the Engineer-in-Charge. The water will be drawn from the source point and the delivery point will be as per the locations shown by the Engineer-in-Charge. The supply shall be made available to lawns/gardens/hedges by daily/alternatives as per the direction of Engineer-in-charge. Note : The water tanker shall be fully loaded for each trip load for watering purpose.

Rectifying the PVC / CPVC / UPVC pipe line burst of the following dia of water line by removing the damaged portion of PVC pipes, replacing with new pipes and restoring the water supply including cutting the damaged pipes, cleaning / scrubbing the surface, fixing the new pipe with necessary solvent cement of approved make etc., all complete as per specification and as directed by the Engineer-in-Charge. Note: Cost for pipe and specials will be paid separately under relevant item.

Providing and fixing Chlorinated PVC (CPVC) pipes for External (open) Exposed on wall pipeline work having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Engineer-in-Charge.

Levelling, bull-dozing the heeped / dumped loosened earth / debris etc., by hiring JCB / Bull-dozer etc., including transporting, operating the vehicle, operating the vehicle by engaging driver/operator with valid driving license, diesel charges, insurance and admissible taxes, labour if any required etc. complete all as directed by Engineer-in-Charge.

Cutting and trimming the branches of the trees of below mentioned girth size of maximum height up to 15.00 metre height from ground level with handling the cut out portion secondary stems, trunk, roots etc., of the 'Banyan Tree / Rain tree / assorted tree', including required labour, tools , hand saw, arc and disposing using mechanical transport of all the cut branches to dumping yard with in a lead of 5.0km including the lorry/tipper and the labours for loading and unloading the branches of tree, leaves etc., and as directed by the Engineer-in-charge. Note: This item operates only for rooted trees.

Below 300mm girth

Supplying and planting of following plants/saplings of good quality & healthy appearance with blooming nature etc., including excavation, transportation, planting, refilling with suitable excavated soil mixed with red earth, manure or sludge as directed (cost of red earth, manure or sludge to be paid separately under relevant item) and initial watering all as per standard practice complete and as directed by the Engineer-in-Charge. The plants having 30cm to 60cm height (unless otherwise mentioned below), well developed, fresh and healthy nature.

Pentanus grass

Heliconia

Areca Palm

Red palm

Croton leaves or Excoecaria Croton

X-mas Tree

Bougainvillea

Canna dwarf

Asparagus Mayuri

Providing and fixing the following sizes of 'LEADER' make gun metal full way gate valves female ends screwed bonnet integral seat non raising spindle class I, ISI marked to IS:778 tested to 20 kg/sqcm hydraulic pressure etc., complete all as per specification and as directed by the Engineer-in-Charge.

25mm nominal bore

40mm nominal bore

Overall rebate (Optional)

INR Zero Only