Indira Gandhi Centre For Atomic Research Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indira Gandhi Centre For Atomic Research - IGCAR Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date25 Oct 2024
Closing Soon18 Nov 2024
Tender Amount₹ 1,60,20,000
Costs
EMD
₹ 3,20,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Revamping Of Electrical System At Hasl Building In Igcar, Kalpakkam
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IGCAR_832162_1Tender No
IGC/ESG/ESD/T1673/2024Tender Authority
Indira Gandhi Centre For Atomic Research ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
415V Class - IV panel P3- Power panel (Ground floor) HASL as per dwg no.IGC/T-1673/03
1
-
-
415V Class - IV panel P4- Power panel (Ground floor) HASL as per dwg no.IGC/T-1673/04
1
-
-
415V Class - IV panel L1- Lighting panel (Ground floor) HASL as per dwg no.IGC/T-1673/05
1
-
-
400A 4P MCCB with enclosure & shunt trip, “ON,OFF,TRIP Indication
3
-
-
250A 4P MCCB with enclosure & shunt trip, “ON,OFF,TRIP Indication
1
-
-
Supply, installation, testing and commissioning of the following SDFU with factory made enclosure with 3Nos Fuse links on MS frame work as per the scope of work. (MS item will be measured separately). (Refer Sec VI, Clause No.14.1).
-
-
-
SDFU TPN 63A, DIN FUSES with 3Nos 63A HRC bolted type fuse links, Sheet steel enclosure FN Cat No:SK90484
3
-
-
Supply, installation, testing and commissioning of the following SDFU with factory made enclosure with 3Nos Fuse links on MS frame work as per the scope of work. (MS item will be measured separately). (Refer Sec VI, Clause No.14.1).
-
-
-
SDFU TPN 125A, DIN FUSES with 3Nos 125A HRC fuse links, Open Execution FN Sheet steel enclosure FN Cat No:SK90486
1
-
-
DB VTPN 8 Way (8 Plus 24) IP 43 - IK 09 with 1No. 125A, 4 Pole DPX3 MCCB (for Incomer) and 8 Nos. 63A,3P MCB (for outgoing), Cat No:507747 or equivalent. The scope includes suply of 1 No. spare MCCB of same make and rating as per section V Part A)
4
-
-
Supply and Embedment of following sizes of flush mounting POWDER COATED TPN/SPN DB Enclosures with Double Door and per Phase isolation DBs consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2).
-
-
-
TPN, 12 Way Distribution Board Powder coated Per Phase Isolation DBs Per phase Isolation kit with all accessories. Cat No:507673,Cat No:507947 or equivalent
6
-
-
Supply, open installation testing and commissioning of the following DB with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires. (MS item will be measured separately). (Refer Sec VI, Clause No.15.2).
-
-
-
DB SPN 12 Way (12) WITH METAL DOOR IP 43 - IK 09cat No:507612 or equivalent
1
-
-
Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
6-32 Amps SP MCB (Type-C)
642
-
-
6-32 Amps DP MCB (TYPE-C)
1
-
-
6-32 Amps FP MCB (TYPE-C)
4
-
-
Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
40-63Amps, FP MCB (TYPE-C)
12
-
-
Supply fixing testing and commissioning of the following RCBOs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2).
-
-
-
RCBO DP 32A sensitivity 30mA TYPE AC, 2Module
45
-
-
RCBO DP 25A sensitivity 30mA TYPE AC, 2Module
12
-
-
Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3).
-
-
-
TPN/VTPN/PPI ,8way,12 Way Distribution Board
36
-
-
Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18)
-
-
-
Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 10Amps modular switch.
59
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box
171
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including 16A modular switch, 6/16 Amps combined shuttered type Socket and 10A modular switch & 3 pin, 6A shuttered type Socket, Modular Plate.
23
-
-
Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket.
15
-
-
Wiring for Light point with 3 Runs of 2.5 Sq.mm Copper wires for Phase, Neutral and Earth from Distribution Board to Light point through MCB Switch Box including supply of one No. of 6A, SPMCB (more than 5.5 meter height)
4
-
-
Wiring for Power Points with 4 Runs of 6.0 Sq.mm Copper wires for Phase, Neutral and 2 Runs of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Three Phase Metal Clad Socket.
6
-
-
Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18)
-
-
-
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to switch box and further to Light point including 1 No 10A modular switch
5
-
-
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 No 10A modular switch
55
-
-
Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 No 10A modular switch and 1 No step type Fan regulator
16
-
-
Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor
233
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box
168
-
-
Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box including 10A modular switch & 3 pin 6A, shuttered type Socket and 16A modular switch & 6/16A combined shuttered type Socket, Modular plate
23
-
-
Wiring for Power point with 2 Runs of 1.5 Sq.mm copper wire for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Power point through Control Switch Box including 10A modular switch 3 pin, 6A shuttered type Socket, Module Plate
8
-
-
Wiring for Power point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for earth from Control Switch Box to control switch box including 3 pin 6A, shuttered type Socket, Modular plate.
8
-
-
Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch board to Power point including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 10A modular switch.
4
-
-
Wiring for fan point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Fan point including 1 No 10A modular switch and 1 No step type Fan regulator
14
-
-
Supply,installation, testing and commissioning of 6A modular switch (cat no.573400)& 3 pin 6A, shuttered type Socket (cat no.573424)and 16A modular switch (cat no.573410) & 6/16A combined shuttered type Socket (cat no.573471), 6 Modular plate (cat No.010996) the above switch sockes to be installed in existing DLP Trunking box with all fixing accessories as required as per site condition. Termination for switch and sockets by using wires is in the scope of work. Wiring for power point to be measured in seperate item.(Refer section V Part -A)
340
-
-
Supply, transportation, installation, testing and Commissioning of the following type of plastic trunking of size 105 x 80 mm (cat no.010422), 85mm PVC flexible cover (cat no.010522), joint for 85mm width cover(cat no.010802), base joint (cat no.010691), internal angle(cat no. 010602), external angle (cat no.010622) and flat angle (cat no.010785), end cap (cat no.010702) as required as per site condition.(Refer section V Part A)
210
-
-
Supply, transportation, installation, testing and Commissioning of the following types of Suspended luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Cane G6 EX LINEAR PENDENTS 40W 5700K CCT NON DIM WHITE (PC) DOWNLIGHT DISTRIBUTION 4 FEET CUSTOMISED SUSPENSION MOUNTING CLAMPS SUITABLE FOR 20MM THREADED ROD-PRIME - LPC0104057NDWEP0DL4C01 with fixing accessories or Equivalent and Lamp Type LED
200
-
-
Supply, transportation, installation, testing and commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Spoon Zen Cat.No. SP 1772,36W, 6000k or equivalent and Lamp Type LED
57
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Recess mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : Moon V2 STD 15W 5700K Item code DRMOS01557NDWEPor Equivalent and Lamp Type LED
14
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1) Cataloge No: ILDSM01857NDGYP
Disc Min LOWBAY 18W 5700K CCT NON DIM GREY (PC) PRIME or equivalent and Lamp type LED
4
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1) Cataloge No: PRFV203640NDWEPC01
Fulllit CR SLIM V2 PANEL LIGHTS SURFACE 36W 5700K CCT NON DIM WHITE (PC) -
PRIME or equivalent and Lamp type LED
4
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No :SLWKB01857NDWEP0004C10
WAND K LIGHTS 18W 5700K CCT NONDIM WITH CUSTOMIZED CLAMPS FOR
SUSPENSION ROD MOUNTING, 4FEET WHITE (PC) - PRIME or equivalent and Lamp Type LED
30
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 30W 5700K code SLWKY03057NDWEP04C22 -SURFACE LIGHTS NONDIM WITH CUSTOMIZED CLAMP OF 30 DEG. TILT WHITE (PC) 4FEET- PRIME or equivalent and Lamp Type LED
32
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WAND K 9W 5700K 2Feet Batten or equivalent and Lamp Type LED
10
-
-
Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). - Catalogue No : WT202W LED6S CW PSU S2 PC or equivalent and Lamp Type LED
18
-
-
Supply, transportation, installation, testing and commissioning of the following Sensors as directed by the Engineer-in-Charge. (Refer Sec VI, Clause No.16).
-
-
-
Dual tech Ceiling mounted sensor having both PIR and ultrasonic sensing elements 90M2 or equivalent. (Refer Sec VI, Clause No.16.3).
18
-
-
Supply, installation, testing and commissioning of the following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket as per the detailed specification. (MS item will be measured separately). (Refer Sec VI, Clause No.15.4
-
-
-
32A 3P+N+E-FP Tempra plug and socket DBs with FP 20A-32A MCB
10
-
-
Supply, installation, testing and commissioning of following sizes of Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm (14/0.3) PVC insulated & FRLS sheathed copper flexible cable of required length as per the detailed specification. (Refer Sec VI, Clause No.17.2).
-
-
-
300 mm Dia Turbo Heavy Duty Exhaust Fan
4
-
-
Supply, embedment and flush mounting of following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket including chipping and finishing as per the detailed specification.(Refer Sec VI, Clause No.15.4).
-
-
-
20 AMPS DP Metra Plug and Socket DBs with 20Amps MCB
14
-
-
Supply, Installation, testing and commissioning of following sizes of ceiling Fans and safety steel rope with 3 Core, 1.5 Sq.mm (14/0.3) flexible copper cable including earth connection. Supply and fixing of regulator is not included in the scope of this item. (Refer Sec VI, Clause No.17.1).
-
-
-
1200mm Sweep AC Ceiling Fan
18
-
-
Supply, Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade following sizes of cables in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Refer Sec VI, Clause No.3)
-
-
-
4C X 10 sqmm 1.1kV grade Copper conductor PVC insulation flat wire armour FRLSH PVC outersheath
500
-
-
4C X 16 sqmm 1.1kV grade Copper conductor PVC insulation flat wire armour FRLSH PVC outersheath
1000
-
-
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)
-
-
-
3/3.5/4 Core X upto 25 Sqmm
50
-
-
3/3.5/4CX Above 120 Sq.mm but not exceeding 3.5/4CX 240 sq.mm
200
-
-
3/3.5/4 Core X Above 240 sqmm to 3/3.5/4Core X 400 sqmm
150
-
-
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3)
-
-
-
3/3.5/4core X Upto 25 sqmm
50
-
-
3/3.5/4Core X above 25 & up to 120 sqmm
100
-
-
3/3.5/4Core X above 120 & up to 240 sqmm
100
-
-
3/3.5/4Core X above 240 & up to 400 sqmm
250
-
-
Retrieval of the already laid one number 1100 Volts Grade XLPE/HRPVC insulated, Stranded Aluminium conductor cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5)
-
-
-
3/3.5/4 Core upto 25 Sqmm
600
-
-
3/3.5/4 Core Above 25 & Upto 120 Sqmm
1100
-
-
Retrieval of the existing one number PVC/HRPVC/XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following sizes laid direct in ground including Removal of end termination, excavation of trenches, retrieving of bricks and back filling as per the detailed specification.(Refer Sec VI, Clause No.5)
-
-
-
3/3.5/4 Core Above 25sqmm & upto120 sqmm
50
-
-
3/3.5/4 Core Above 240sqmm & upto 400 sqmm
100
-
-
End Termination of the following size Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).
-
-
-
4C x 10 Sq.mm including cable gland earthing
20
-
-
4C x 16 Sq.mm including cable gland earthing
24
-
-
End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1).
-
-
-
4 Core X10sqmm
4
-
-
3.5/4 C x 35 sq.mm
6
-
-
3.5/4C x 50/70 sq.mm
4
-
-
3.5 x 185 sq.mm
2
-
-
3.5 x 240 sq.mm
2
-
-
3.5 x 400 sq.mm
4
-
-
Supply and Installation of following sizes of Surface Mounting Plastic Boxes as per the detailed specification. (Refer Sec VI, Clause No.15.6).
-
-
-
Surface Mounting Plastic Boxes 1/2 Module
48
-
-
Surface Mounting Plastic Boxes 3Module
30
-
-
Surface Mounting Plastic Boxes 4 Module
5
-
-
Surface Mounting Plastic Boxes 6 Module
25
-
-
Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).
-
-
-
One/Two module
48
-
-
3 Module
15
-
-
4 Module
5
-
-
6 Module
10
-
-
Supply and external installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc. as per the detailed specification. .(Refer Sec VI, Clause No.27).
-
-
-
25mm dia 1.8mm wall thickness Heavy Duty, Hot Dip Galvanised/ ERW Conduits with 50mm deep junction boxes.
800
-
-
Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29)
-
-
-
20 X 12 mm size of PVC Mini trunking.
650
-
-
25 X 12 mm size of PVC Mini trunking
200
-
-
32 X 12mm size of PVC Mini trunking
200
-
-
Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11).
-
-
-
MS fabrication 1 coat primer & 2 coats synthetic enamel paint
1000
-
-
Rod Earthing
-
-
-
Supply installation and testing of Maintenance free earthing system TRIPOLAR (3x10feetx5/8inch copper bonded steel rod, 55 kg Ground Enhancing Material (GEM) ) as per IS: 3043 including RCC Chamber and RCC cover as per Drawing No.IGC/ESD/5060/1008/1 enclosed . (Refer Sec VI, Clause No.12.12).
2
-
-
Supply, fabrication and installation of the following size of Copper Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. (Refer Sec VI, Clause No.12.7).
-
-
-
25X3 mm Copper flat
150
-
-
Supply, fabrication and installation of the following size of Copper Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. (Refer Sec VI, Clause No.12.7).
-
-
-
25X3 mm Copper flat
450
-
-
Supply and installation of the following sizes of copper wires including excavation and refilling as per the detailed specification. (Refer Sec VI, Clause No.12.8).
-
-
-
8 SWG copper wire
50
-
-
Supply and installation of the following sizes of copper wires in built in trench as per the detailed specification.(Refer Sec VI, Clause No.12.8)
-
-
-
8SWG copper wire
750
-
-
14 SWG Copper Wire
25
-
-
Supply and open installation of following Sizes of MS boxes as per the detailed specification. (Refer Sec VI, Clause No.15.10).
-
-
-
150(W)X150(H)X80(D)mm, 1.6mm thick sheet MS Box.
20
-
-
200(W)X200(H)X120(D)mm,1.6mm thick sheet MS Box
10
-
-
300(W)X300(H)X120(D)mm,1.8mm thick sheet MS Box
23
-
-
400(W)X300(H)X200(D)mm, 1.8mm thick sheet MS Box
6
-
-
Supply, cleaning the floor, proper pasting and installation of following insulating mat as per specification. (Refer Sec VI, Clause No.25).
-
-
-
2.0 mm thickness, Max useable voltage 3.3kV, AC Proof voltage 10kV for 3 minutes, AC dielectric strength 30kV RMS Insulating Mat confirming to IS:15652
10
-
-
Removal of various sizes of MS box / switch box from the wall / panel (Refer Sec VI (MNC), Clause No.19).
20
-
-
Removal of various sizes of surface mounted GI/ PVC Conduit from wall/column/beam and transportation to storage yard (Refer Sec VI (MNC), Clause No.19).
250
-
-
Removal of ceiling/Wall mounting/Exhaust fans of following sizes in labs/building/high bay/toilet in IGCAR (Refer Sec VI (MNC), Clause No.19).
-
-
-
Fans Up to 5 Mtrs height
16
-
-
Removal of the following from 415Volts switch boards (Refer Sec VI (MNC), Clause No.19).
-
-
-
63A/100A/125A, 500V, TP/TPN/SFU/ Combination SFU or 4/6/8/12 Way SPN DB or 4/8 WAY TPN DBs
10
-
-
250A/315A/400 A, TP/TPN/SFU/ Combination SFU or 12 Way TPN DBs
5
-
-
Maintenance of Earth Pits and measurement of Earth Pit Resistance as per the specification. (Refer Sec VI (MNC), Clause No.2).
10
-
-
Removal of light fixtures (Refer Sec VI (MNC), Clause No.21).
-
-
-
Removal of light fixtures in labs and low bay areas
250
-
-
Removal of light fixtures in high bay areas
10
-
-
Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification.
10
-
-
Supply and installation of following 1000 V, Feedthrough, Finger safe Power terminal block with Nut bolt termination connection, PA 6.6 housing, Thermoplastic Terminal connector along with Din rails in existing MS Boxes as per the specification. (Refer Sec V Part A)
-
-
-
SPT 70, make: Elmex or equivalent
3
-
-
SPT 185, make: Elmex or equivalent
6
-
-
SPT 300, make: Elmex or equivalent
3
-
-
Removal, transportation and unloading of 415V industrial type panel from HASL building to storage yard including removal of Power cables connected with the panel. (Refer Sec V Part A)
4
-
-
Removal of 1.5 or 2.5 or 4 sq.mm aluminium wire from concealed/ Exposed PVC / ERW / Flo-coated Metal conduits on roof or wall conduits as per the detailed scope of work.(Refer Sec V Part A)
5000
-
-
Supply and replacing following earth pit chamber parts after removing and disposing off old/damaged part as per drawing No. IGC/ESD/5060/1008/1.
-
-
-
RCC ring with cover
10
-
-
Temporary installation of class IV panel as directed by Engineer-in-charge.(Refer Sec V Part A)
1
-
-
Temporary installation of DB as directed by Engineer-in-charge.(Refer Sec V Part A)
4
-
-
Equipment weighing more than 100 kgs and upto 1000 kg within a distance of 5km. Dismantaling and segregation is also included in the scope
5
-
-
Supply and Fixing of Powder coated MS Danger / Warning Boards of different Voltage levels as per the detailed specification. Make: Thadhani or equivalent. ( (Refer Sec V Part A ).
50
-
-
Supply and pasting of water proof stickers of 250 x 50 mm size with messages as directed by Engineer in charge as per the detailed specification. ( (Refer Sec V Part A )
50
-
-
Removal of ferrulles in existing lighting/power wiring circuits and re fixing of new ferrules as per SLD.
200
-
-
Telephone related work : Supply, Loading, Transportation,Unloading at site, installation, Testing and Commissioning of one number of armoured Telephone cable of following sizes in direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required. (Refer Sec VI, Clause No.3 & section V PART - B)
-
-
-
100 Pairs 0.63mm PIJF telephone cable.
100
-
-
Supply, Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number armoured Telephone cable of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification. (Refer Sec VI, Clause No.3 & section V PART - B)
-
-
-
50 Pairs 0.63mm PIJF telephone cable.
500
-
-
100 Pairs 0.63mm PIJF telephone cable.
400
-
-
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of one number of armoured PIJF 0.63mm dia Telephone cable of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification.(Note: Cable will be issued free of cost by the department). (Refer Sec VI, Clause No.3)
-
-
-
Upto 20 Pair
100
-
-
Wiring and termination for Telephone point with 1 Run of 0.6 mm dia, 250 V grade PVC insulated, twin twisted,Two pair, tinned copper wire from Telephone Junction Box to Telephone points in concealed conduit/ PVC Trunking including of supply of Telephone wire. (Refer Sec VI, Clause No.18)
-
-
-
Wiring with 1 Run of Twin twisted, Two pair (0.6mm dia.).
2500
-
-
Supply and installation of two modular box with two modular plates suitable for fixing telephone socket of rebuted brand. (Sec VI, Clause No.15.6 & 15.7).
85
-
-
Supply and Installation of RJ-11 socket 1 Gang with shutter for information outlet and termination of 1 Run of data Cable.
170
-
-
Supply and external installation of following sizes of Heavy Duty, PVC circular rigid Conduits for Electrical & Communication System with required Solid Long Bends, Couplings, GI Wire etc, as per the detailed specification.(Refer Sec VI, Clause No.27).
-
-
-
20mm Dia, 1.9mm wall thick PVC heavy duty conduit with 50mm deep Junction box.
80
-
-
25mm dia., 2mm wall thickness PVC heavy duty round rigid conduits with 50mm deep Junction boxes.
180
-
-
32mm Dia, 2.5mm wall thickness PVC heavy duty round rigid conduits with 50mm deep Junction boxes.
160
-
-
Supply & installation (Embedment in concealed) of wall mountable powder coated MS telephone distribution boxes of different sizes with SS KRONE Base module, Cable entry, lock and key provision. (Ref. Sec V Part -B & Sec VI, Clause No.15.10).
-
-
-
300(W)X300(H)X120(D)mm MS Box. (for 50 pair)
2
-
-
500(W)x300(H)x150(D) MS Box. (for 100 pair)
3
-
-
500(W)x400(H)x150(D), 2 mm thick sheet MS Box-(100L+100R =200 pair)
2
-
-
750(W)x500(H)x150(D) MS Box - (100x2L+100x2R = 400 pair) (Note: L - Left side Krone base, R- Right side Krone base fixing)
1
-
-
Termination of the following sizes of PVC Sheathed, jelly filled, Flat/wire armoured PIJF UG Cable using Single Compression, Heavy Duty Gland connecting the cable to the equipment Telephone DBs etc. The rate shall include the cost of supply of Cable Gland. The Contractor shall arrange for drilling of holes wherever necessary for the completion of the work. (Refer Sec VI, Clause No.10.2).
-
-
-
Upto 20 Pair.
6
-
-
Above 20 & upto 50 Pair
8
-
-
Above 50 & upto 100 Pair
6
-
-
Retrieval of the already laid one number Telephone cables of following sizes in built-in trenches, on walls, poles and from embedded pipes including removal of end termination, GI spacer, clamps etc as per the detailed specification. (Refer Sec VI, Clause No.5)
-
-
-
Above 20Pair to Upto 50Pair
200
-
-
Supply and installation of Krone LSA PLUS disconnection Module and krone tool. (Ref Sec V Part-B).
-
-
-
Supply and installation of Krone LSA PLUS disconnection Modules 2/10 (10 pair each) at HASL building at IGCAR site as per the scope of work.
130
-
-
Supply and installation of Krone insertion tool to terminate and cut wire on all disconnection modules. Product part no.6089 2 003-00.
2
-
-
Supply and installation of the following telephone accessories: (Ref Sec V Part -B).
-
-
-
Push button analog telephone instruments with line cord, spring cord and rosettee box. (Ref Sec V Part -B)
50
-
-
CLIP telephone instruments with line cord spring cord and rosettee box. (Ref Sec V Part -B).
30
-
-
Jumper wire (colour: Red/white & Blue/white) for telephone connection.
200
-
-
CIVIL RELATED WORKS:- Removal of existing False ceiling including disposing, cleaning and depositing the debris with in a distance of 50 metres etc. as directed by Engineer.-in-charge. (Ref Sec V Part -C).
565
-
-
Refixing of existing False ceiling including necessary fixtures such as bolt and nuts etc. for the completion of the work and as directed by the Engineer-in charge (Ref Sec V Part -C).
165
-
-
Providing and painting White washing one coat on ceiling surface at all levels with lime to give an even shade as per specifications including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-Charge. (Ref Sec V Part -C).
150
-
-
Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Mineral Fibre Reinforced Factory applied Vinyl painted "ARMSTRONG" Ceiling tiles or approved equivalent make & pattern, Tiles having 16/15mm thick, and approved surface Design and edge Profile (TEGULAR or Equivalent ) placed in a suspended Grid of size of 600x 600mm made of Hot-dipped G.I steel sections having an exposed surface capping of Pre-finished baked polyester painted coil wherein the main tee of size 24x32x1200mm shall be suspended at 1200mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. (The cross tees of size 24x27x1200mm shall be inserted in to slots between the main Tees at 600mm centres and thereafter in direction vertical to the longer TEEs, cross Tees of size 24x25x600mm shall be inserted to form a grid size of 600x600mm resting on the Perifery walls on wall angles of size 24mmx24mm including providing necessary openings for light fixtures, diffusers, Trap doors etc to be made as per layout Drawings and as per directions of Engineer-in-Charge. The main Tees to be suspended from the ceiling / Soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. The entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m. Only False Ceiling area will be Measured for the Purpose of Payment.) (Ref Sec V Part -C).
395
-
-
Supplying and fixing Armstrong make false ceiling tiles making cutout for light fittings and other electrical fixtures and necessary bolt and nuts etc. complete as directed by the Engineer-in charge .The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in black colour and with a web height of 45 mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. All connection between sections should have pullout strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per Sqm etc., all complete and as directed by Engineer-in-charge. (Ref Sec V Part -C).
18
-
-
Conveying the surplus excavated earth & debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, levelling all complete as per specification and as directed by the Engineer-in-Charge.
Note:
1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil and @ 50% in respect of Rock from the corresponding Stack / Truck measurements.
2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road (Ref Sec V Part -C).
-
-
-
Lead charges for lead Exceeding 3 kilometre but not exceeding 4 kilometre
25
-
-
Providing and fixing false ceiling with 12.5mm thick tapered edge gypsum moisture resistant board at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction, (including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230mm c/c,including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm or both sides of joint and including the cost of painting one coat primer and two coats of emulsion paint of approved colour, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge) (Ref Sec V Part -C).
18
-
-
Dismantling brick work in cement mortar at all levels by manually / by mechanical means, carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 50m lead all as per specifications and directed by the Engineer-in-charge.
8
-
-
Providing and constructing brick masonry at all lifts using well burnt stock bricks in cement mortar 1:5 using crushed stone sand including suitable scaffolding, raking out joints, curing complete as per specifications, drawings and as directed by the Engineer-in-charge for foundation, superstructure, etc. (Ref Sec V Part -C).
4
-
-
Providing plastering to the internal surfaces of brickwork/concrete at all elevations in cement mortar 1:5 using crushed stone sand, 12mm thick finished with a floating coat of neat cement including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications. (Ref Sec V Part -C).
10
-
-
Providing and applying painting Two coats at all levels with premium Plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty, scaffolding complete all as per specifications and as directed by the Engineer-in-charge. (Ref Sec V Part -C).
480
-
-
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge.
Note: Lifting device arrangements if any required also arranged by the contractor at his own cost. (Ref Sec V Part -C).
0.25
-
-
Supplying and fixing stainless steel mesh suitable for wooden reapers in both sides including all fixtures complete all as per directed by the Engineer-in-charge. (Ref Sec V Part -C).
25
-
-
Providing, fixing and grouting with Cera inject SS, fixing non returnable packer in to the roof slab to a depth of 30 mm for grouting purposes including injection packer, packer connector, labour for packing fixing, labour for packer grouting and applying Cera inject SS of 1.14 g/cc and Cera inject LV plus of 1.04 g/cc mixing in ratio of 1:1 and having a pot life upto 6 to 8 hours for arresting roof leaks, low roof leakages, underground sump leaks at various elevations including all machinery , tools, manpower, necessary scaffoldings and as per specifications and as directed by the Engineer-in-Charge.Note:
The consumption of grout material measured for bill is the actual quantity of intake during grouting. Wastages during grouting process and other wastages are not considered for measurement. (Ref Sec V Part -C).
10
-
-
Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313 for post Anti-termite treatment to existing buildings as per manufacturers specifications and as directed by the Engineer-in-Charge. Work to be executed by M/s Pest Control (India) or any other approved agency and specified guarantee for 7 (Seven) years shall be furnished by the tenderer. Payment will be cleared only after submission of Guarantee. (Over all Plinth area shall be measured and paid for), all complete as per specification and as directed by the Engineer-in-charge. (Ref Sec V Part -C).
50
-
-
Providing and fixing anodized aluminium (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make conforming to IS:733 and IS:1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and directions of Engineer-in-charge. Note:
1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (Fittings, glazing and panelling shall be paid for separately) (Ref Sec V Part -C).
360
-
-
Removing and refixing the door & window shutters/ frames, false ceiling, glass partition, shifting of all damaged materials including necessary repair works like planning, replacing the damaged wooden frames/styles including replacing worn out screws with new one all complete as directed by the Engineer-in-charge. (Ref Sec V Part -C).
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%