Indian Port Rail And Ropeway Corporation Limited Tender

Integrates All Management Functions into One Client • Allows Device Initialization and Management • Live Video Playback from Edge Device • Supports Access Control and Video Intercom Integration • Configure Video Wall Layout - including licence for following (ANPR, Bullet, PTZ).

Intel Processor · Max 320 IP Camera Inputs · Max 640 Mbps Incoming/recording Bandwidth · 16 HDDs, SATA, Hot-Swap · Supports RAID 0/1/5/6/10/50/60/JBOD, Hotspare · iSCSI and Mini SAS for Expanded Storage Space · Support standard iSCSI Protocol Storage · Modular&Cableless Design · Redundant Power

10TB HDD Hard disk Drive

24 10/100/1000 Base-T and additional 4 1G Base-X ports. Should support minimum 370 watts poe budget that supports 802.3at, Layer 2 Features: Should support STP, RSTP, MSTP, IGMP v1/v2/v3 snooping, loop protection, STP root guard, Voice VLAN, loop protection, MLD snooping (MLDv1 and v2), IEEE 802.3ac, IEEE 802.1v, 16k MAC Table or more, PVST+ compatibility mode, RIP, static routing, capable to support IEEE 802.1Q, IEEE 802.1ad Provider bridges (VLAN stacking, Q-in-Q), Resiliency: Should support IEEE 802.17/equivalent for sub 50ms ring protection, Security: Should support ACL, DHCP (relay and client), IP Source guard, DAI, Private VLAN, Authentication ( MAC, Web and IEEE 802.3x), sflow, SSLv2 and SSLv3, TACACS+, LAG, IP precedence and DiffServ marking based on layer 2, 3 and 4 headers, Management : CLI, GUI, USB interface for taking backup of software release files configurations, Digital optical monitoring, Time Domain Reflectometry/ equivalent, DHCPv6, DNSv6, Telnetv6 and SSHv6, NTPv6 client and server, RMON 4 groups, SNMPv3, LLDP-MED, IEEE 802.3az, IPv4 and IPv6 support, SDN openflow v1.3 ready, Should support single IP management of min 10 switches for ease of management. Should support Unidirectional Link Detection (UDLD) or equivalent to detect unidirectional links caused by incorrect fibre optic wiring or port faults and disable on fibre optics interfaces, Should inherently support operating temperature range of 0-50C, Should support UL, cUL, UL-EU, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.

8 10/100/1000 Base-T and additional 2 1G Base-X ports. Should support minimum 120 watts poe budget that supports 802.3at. Layer 2 Features: Should support STP, RSTP, MSTP, IGMP v1/v2/v3 snooping, loop protection, STP root guard, Voice VLAN, loop protection, MLD snooping (MLDv1 and v2), IEEE 802.3ac, IEEE 802.1v, 16k MAC Table or more, PVST+ compatibility mode, RIP, static routing, capable to support IEEE 802.1Q, IEEE 802.1ad Provider bridges (VLAN stacking, Q-in-Q). Resiliency: Should support IEEE 802.17/equivalent for sub 50ms ring protection. Security: Should support ACL, DHCP (relay and client), IP Source guard, DAI, Private VLAN, Authentication ( MAC, Web and IEEE 802.3x), sflow, SSLv2 and SSLv3, TACACS+, LAG, IP precedence and DiffServ marking based on layer 2, 3 and 4 headers. Management : CLI, GUI, USB interface for taking backup of software release files configurations, Digital optical monitoring, Time Domain Reflectometry/ equivalent, DHCPv6, DNSv6, Telnetv6 and SSHv6, NTPv6 client and server, RMON 4 groups, SNMPv3, LLDP-MED, IEEE 802.3az, IPv4 and IPv6 support, SDN openflow v1.3 ready. Should support single IP management of min 10 switches for ease of management. Should support Unidirectional Link Detection (UDLD) or equivalent to detect unidirectional links caused by incorrect fibre optic wiring or port faults and disable on fibre optics interfaces. Should inherently support operating temperature range of 0-50C. Should support UL, cUL, UL-EU, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950. Approved Makes : Cisco, Juniper, Allied Telesis

1G Single Mode Module - Media Type - Single Mode Fiber. Wavelength - 1310nm. Maximum Data Rate - 1.25GBPS. Distance - 10KM. Environment Condition : Operating Temperature - 0°C to 70°C (23°F to 158°F). Operating Humidity - 5 to 85% non-condensing. Storage Temperature - -40°C to 85°C (-40°F to 185°F). Storage Humidity - - 0 to 85% non-condensing. Fiber Connectors - LC Type

RJ45 Industrial Grade connector

Cat6 U/UTP, 4 Pair, 250Mhz, DJ, ECCS Armored, 23 AWG,305m Standards: ISO/IEC 11801 IEC 61156-5 2nd ed. EN 50173-1 EN 50288-6-1 TIA/EIA 568.C.2, Conductor: Solid Bare Copper. Insulation: Polyethylene, Conductor diameter: AWG23, Twisting: 2 wires to the pair, Cable lay up: 4 pairs to the core with cross separator, Cable outer jacket material: PE, Black with Anti Rodent (Thickness 1.1 nominal), Cable inner jacket material PVC, Armoring ECCS Tape Armored (Thickness ˃ 0.125mm), CPR classification: Eca, Cable diameter: Ø 8.4 ± 0.3 mm or better, Rip cord: Yes, Max tested at 250Mhz, Temperature: -20° C to +70° C, Cable length 305M, Color Black.

Supplying single mode - 6F SM (G.652D) Central Loose Tube, ECCS Armored, HDPE Outdoor Cable. Standard - ISO/IEC 11801:2002 ITU-T G.652.D IEC 60793-2-50:2004, B1.3 IEC 60794-1-2 E1; IEC 60794-1-2 E11; IEC 60794-1-2 E3; IEC 60794-1-2 F1; Fiber type, Class - Single Mode (SM), OS2, Loose Tube Fiber Count - 6, Peripheral strength member – Steel Rod, 2nos, No of Rip cords - 2 no’s, Conductor type - Central loose tube, gel-filled, Cable jacket material - HDPE, Cable jacket characteristics - cable, water-tight, Cable protection - ECCS tape, Cable overall diameter - 8.3 ± 0.5 mm, Bending Radius - Min. 20 D, Tensile Strength - 800 N or better, Crush Resistance - 1000 (N /100mm) or better, Installation Temperature - -20° C to +70° C, Operating Temperature - -20° C to +70° C, Storage Temperature - -20° C to +70° C, Mode Field Diameter (nominal) IEC/EN 60793-1-45 - 9µm +/-10%, Core (MFD) non-circularity (%) IEC/EN 60793-1-20 - ≤ 6, Cladding diameter (µm) IEC/EN 60793-1-20 - 125µm +/-2µm, Cladding non-circularity (%) IEC/EN 60793-1-20 - 1%, Optical Attenuation at 1310 nm - 0.38 dB/Km (cabled fiber), Optical Attenuation at 1550 nm - 0.25 dB/Km (cabled fiber), Chromatic Dispersion (1285-1330 nm) IEC/EN 60793-1-42 - 3.5 ps/nm Km, Cut off wave length (λc nm) IEC/EN 60793-1-44 - 1330 nm maximum.

19” 1U Fiber Shelf 12 Ports SM LCPC DX Adapters and Splice Tray - Supply, Installation Testing & Commissioning of rack mount 12 Ports, coupler & Pigtail loaded (LIU) interconnect unit with adapter panel as per specification complete. Fibre Shelf Specification: The 19” 1U Fiber Shelf is a shelf assembly for a fiber management system in a networking rack environment. Splice Tray is Plastic, ABS/PC. Dimensions of Fiber shelf [mm] - 482 Height x 270 Width x 44.45 Depth. Splice elements for up to 6x LC-PC SM DX, 12F Splice Trays - 1 no. Capacity of Ports in Fiber shelf (ports):  12. Number of connectors (A) are 6. Connector type (A) is LC Duplex. Inner tray of patch panel can be easily slide front & back. Easily removable Top plate with push buttons. Front panel equipped with adapters.1U Patch panel material Color - CRCA 1.2mm, RAL 7035. Transport Temperature – -40 up to +85. Storage Temperature – -40 up to +85. Operation Temperature - -25 up to +55. Climate testing IEC 60068-2-2 / IEC 60068-2-1. Temperature change and damp heat IEC 61300-2-22 /IEC 61300-2-19.

SM LC - LC 3m Patch Chord

A5x-EF: 4.9-6.4 GHz, 802.11ac, 2 port PTMP access point with GPS, Connectorized. For ROW countries.

5 GHz Sector Antenna,

Gigabit Power over Ethernet (PoE) injector 24V, 0.5A, 12W with IEC- 320 C6 3 pin inlet for C5 series and A5x. Requires C5 3 pin power cord.

EU Power Cord, black (60 cm, 2 ft), for PoE Injector 24V (502-00025) and PoE Injector 50V (100-00080).

Network Interface Device, technician's outdoor Ethernet access, ESD protection and grounding point. Recommended for ALL installations.

4.6-6.4 GHz , 8 dBi Modular Radio, For PTMP or PTP, uses N5-X Antennas

N5-X25 4.9-6.4 GHz Modular Twist-on Antenna, 400mm Dish for C5x only, 25 dBi gain

Flexible Pole and Surface Mount XL. Our most flexible, compact mount available, allowing attachment to any vertical or other angled pole, or any flat surface.

Factory made concretized CAT6 SFTP outdoor cable for (50 Mtrs Roll )(Non Mimosa make)

CAT 6 SFTP Patch Cord 2mtr (Non Mimosa make)

I&C Kit

I&C BTS A5x Per Sector

I&C CPE C5x Per CPE

SITC for WiFi

WALL MOUNT – OUT DOOR IP66 : Racks should be manufactured out of steel sheet punched, formed, welded and powder coated, Rack should have 100% assured compatibility with all equipment’s conforming to DIN 41494 (General Industrial Standard for equipment’s) or Equivalent EIA /ISO / EN Standard. Rack should have 2 No Adjustable, 19” verticals with Punched 9mm Square Hole and Universal 12.7mm-15.875mm-15.875mm alternating hole pattern offering greater mounting flexibility and maximizes usable mounting space, The Racks should be 600mm in width and 500 in depth for Network application, Physical Specifications : The Rack should have below dimension, H - 481, W - 600, D - 500. Standard for Rack configuration should be welded frame integrated with side panel and vented top cover. Equipment Access & Installation : The front door should open to allow easy access. Rack should have 1 Packet of mounting hardware, Pack of 20. Pole Mount Bracket to be provided. Material Requirements :All weight bearing components should be made from steel with a thickness not less than 1mm All sheet metal parts should be Pre Treated and powder coated meeting ASTM Standard. Grounding Requirements : All enclosure components i.e. frame and door should be bonded together and to rack ground point, OEM to provide rack ground point, Provision to further ground to Telecom Ground bus bar System, Grounding and bonding as per UL Standards Certifications, Environmental and Safety Requirements: Racks should be manufactured by ISO9001:2015, ISO14001:2004 & OHSAS18001:2007 Certified company and should have proper EHS Policy. Products must be IP66 Test Certificate from UL Lab, Manufacturer must certify that the products are RoHS Compliance, Manufacturer must certify that the products are Comply DIN41494 and Equivalent EIA/ISO/EN /CEA Standard. The rack should comply minimum of IP 56 rating for protection against touch, ingress of foreign bodies and ingress of water, The enclosure should both protect the user from mechanical hazards and generally meet the requirements for a mechanical enclosure (stability, mechanical strength, aperture sizes, etc.) as defined in IEC 60950 Third Edition. Rack Power Distribution Units & Environmental monitoring : Rack should have 1 no. Power Distribution Units with 6No 5/15A Indian Round Pin with PDU Rating 3.6KVA. Cable Management: Rack should have 1 no. Horizontal Cable Organizer with plastic loops. Rack should have provision for cable Entry and Exit from bottom with appropriate gland plate, Warranty and Support : The Products manufactured should provide warranty for 1 year from date of invoice, the warranty does not cover wrong Usage or miss-handling the products.   Electrical items such as Sockets, switches, fans etc. should have warranty for 1 year from date of installation. For malfunction of any units/item in the rack, the support should be provided within the next business day. Warranty claim will be attended with in 2 or 3 working days.

42U Rack Frame/800X1000/Steel/CKD Assembled/Casters Type 3/Black, Levellers, 19" Adopter Kit/42U/Closed/Door/100X150/2/Black, Perforated Door/42/800/Convex/Black, Perforated Door/42/800/Dual/Black, Side Panels/1000/42U/Vented/Black, Swing Handle/Mechanical Lock / Single Point / Common Key/Die Cast Metal, Swing Handle /Mechanical Lock / Three Point / Common Key/Die Cast Metal, Server /IT Rack mount power distribution unit, 1Ph, 230V, 32A, 50/60Hz, Zero U standard with 12 X Indian Round Pin 5/15A, 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black/ Inlet Plug Not Installed, Horz. Cable Organiser/1U/ Channel On Front, Mounting Hardware-CR (Pack of 20), ITE / Server Rack Air Circulation module/Tower Mount/360CFM, Shelf/1000/Black.

32mm High Density Polyethylene Pipe (HDPE Pipe), HDPE Plastic Pipe and HDPE Irrigation Pipe, which is available in all standards like ISI-4984, ISO-4427, DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invented PE 100 material that is approved by international agencies such as Bodycote, Germany. Made using 100% virgin grade HDPE compounds, our range of pipe have an average life of more than 50 years under normal working conditions. These High Density Polyethylene Pipe, HDPE Plastic Pipe and HDPE Irrigation Pipe are available in sizes ranging from 20 mm to 1000 mm OD and pressure varying from 2.5 Kg/Cm2 to 20 Kg/Cm2. We offer customization on our range as per the specifications of our clients

25mm PVC conduit with necessary accessories (Bend, clamps ect…)

15Ft Pole with Anticorrosive Coating painting for Camera mounting 6inch dia, top end 1feet 25mm dia support pipe with 100 X 100mm metal plate , Mud or cement road barried 2feet depeth 1.5feet width concrete cement, jalli & m sand mixed below sand 2feet depth above 1feet height Top side customized clamp for fiber cable hanging -

18Ft Pole with Anticorrosive Coating painting 6inch dia, top end 1feet 25mm dia support pipe with 100 X 100mm metal plate ,Mud or cement road barried 4feet depeth 1.5feet width concrete cement, 12mm jalli & m sand mixed below sand 3feet depth Top side customized clamp for fiber cable hanging.

IP66 encloser pole mounting box

Intel Xeon Gold 5317 3G, 12C/24T, 11.2GT/s, 18M Cache, Turbo, HT (150W) DDR4-2933, 16 DIMMS, 1X 32GB RDIMM, 2.5" Chassis with up to 8 Hot Plug Hard Drives, 1.2TB 10K RPM SAS 12Gbps 512n, 2.5in Hot-plug Hard Drive, PERC H 755 Conroller, Dual, Hot-plug, PSU (1+1), 800, Mixed Mode, 3YR ProSupport 4Hr and Mission Critical

Win Svr 2019 (Enterprises)

32" Monitor for CCTV viewing

PoE + Adapter for PTZ camera

1in 16 out HDMI Switcher

C-HM/HM-6 Cable supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS−HD, CEC, 1.80m (6ft).

15mtr Standard HDMI Cable C-HM/HM/PRO-50feet

Testing Commissioning and Documentation

The supply, installation, testing, and commissioning of a NUMERIC HPI 33 EVO 3 Phase 30KVA conventional UPS (Uninterruptible Power Supply). It highlights key features such as the use of IGBT rectifiers and inverters to achieve specific performance standards, including a 0.99 Input Power Factor (IPF) and less than 3% Total Harmonic Distortion (THDi). The UPS includes Modbus connectivity through the Battery Management System (BMS) and is supplied with necessary accessories like battery racks, interconnecting cables, a breaker for the battery bank, and a complete set of 40 batteries with 65 AH capacity to provide 30 minutes of backup at full load. The entire setup is PEP Certified.

Sub Total

Total Amount

Free service for one year, starting from the date of handover -CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

1st year- CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

2nd year - CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

3rd year - CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

4th year - CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

5th year - CCTV & Passive component (Patch Panel, Information outlet, Patch chord, Cameras, Server, Rack & OFC Components)

Sub Total