Indian Institute Of Technology Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Eprocure
Opening Date1 Jul 2024
Closing Date22 Jul 2024
Tender Amount₹ 47,37,000
Costs
EMD
₹ 94,750Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IITM_199931_1Bid Award Id
ViewTender No
14/2024-25/CivilTender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://https://www.iitm.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets, and dressing of sides and ramming of bottoms, depth up to 1.5m, including getting out the excavated soil and then returning the soil as required, All kinds of soil
-
-
-
... More
Pipes, cables etc. not exceeding 80mm dia
10
202
2020
... More
Pipes, cables etc exceeding 80mm dia but not exceeding 300mm dia
5
330
1650
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth : consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m
20
192
3840
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
10
391
3919.9
... More
Supplying and filling in plinth with M-Sand under floors including watering, ramming, consolidating and dressing complete
5
3346
16730
... More
Supplying and filling with shell lime and sand in 1:2 in plinth under sand filling in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering etc.
1
6229
6229
... More
Supplying and filling of quarry dust in layer not exceeding 20cm and watering each layer thoroughly with consolidation and ramming etc., complete for basement and in foundation.
10
2511
25118.8
... More
Removing of existing surplus earth, rubbish and garbage through the lorry / truck including loading, unloading and transporting to out side the IITM Discovery campus, Thaiyur premises including approval from local authorities like municipality/corporation complete as per the direction of Engineer in charge. Necessary deduction for voids @ of 20% will be made from the actual measured volume of rubbish.
20
342
6840
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement :2 coarse sand/ M sand :4 graded stone aggregate 20mm )
5
8140
40700
... More
1:3:6 (1 cement :3coarse sand / M sand :6 graded stone aggregate 20mm)
5
7471
37355
... More
1 : 4 : 8 (1 cement : 4 coarse sand / M sand : 8 graded stone aggregate 40mm nominal size)
5
6934
34670
... More
1:5:10 (1 cement :5 coarse sand / M sand :10 graded stone aggregate 40mm )
5
6553
32765
... More
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases etc. including hoisting and setting in position 1 : 1.5 : 3 (1 cement : 1.5 coarse sand / M sand : 3 grade stone aggregate 20mm nominal size)
1
10023
10023
... More
Reinforced Cement Concrete work in beams, suspended floors, roofs having slope up to 15 degrees, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centering and shuttering – M 25 grade concrete.
-
-
-
... More
All works up to plinth level
3
8838
26514
... More
All works above plinth level up to floor V level
3
9970
29910
... More
Providing and laying in position of RCC of grade M35 Concrete for walls and floors, columns, beams and slabs excluding cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc complete at all levels as per the direction of Engineer in charge. (minimum cement content 380 kg/cum + fly ash as per IS 456).
5
10298
51490
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand / M sand : 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc.complete, excluding plastering of the jambs, sills and soffits.
-
-
-
... More
50 mm thick
5
1741
8705
... More
40 mm thick
5
1641
8205
... More
Supplying and laying vermiculate (light weight aggregate) concrete with a ratio of 1:4 (1 cement :4 helite aggregate ) /ready made EPS based cement concrete of grade M3 or above including compacting and laying. The rate inclusive of labour charges for mixing, laying etc complete.
1
8980
8980
... More
Providing and laying of brick jelly cement concrete 1:3:6 for sunken portion at all levels. (1 part cement : 3 part sand / M sand :6 part brick aggregate of size less than 40mm)
5
7146
35730
... More
Providing centering shuttering and form work for RCC works for all applicable RCC items in this schedule using best quality of film coated plywood / MS Sheets centering and shuttering materials, for required heights and sizes in all floors and all levels including charges for demoulding agent, removal of form work etc complete at all levels.
21
648
13608
... More
Supplying cutting bending and fabricating and placing in position as directed steel (SAIL, TISCO or RINL) reinforcement for RCC works in all floors, using MS or High Strength Deformed bars/RTS and MS binding wire 18 gauge etc complete at all levels. Fe 500D grade
110
103
11330
... More
Supplying and mixing steel fiber manufactured by Dramix of approved L/D ratio and dia.
5
260
1300
... More
Brick work with Fly ash concrete blocks of class designation M100 in foundation and plinth in
-
-
-
... More
Cement mortar 1:6 (1 Cement : 6 coarse sand / M Sand)
5
9411
47055
... More
Cement mortar 1:4(1cement :4 coarse sand / M sand)
3
9694
29082
... More
Add Extra for brick work with Fly ash concrete blocks in superstructure above plinth level up to floor V level
3
444
1332
... More
Half Brick masonry with fly ash concrete blocks of class designation M100 in foundation and plinth in : Cement mortar 1:4 (1 Cement : 4 Coarse sand / M sand)
20
1144
22880
... More
Extra for half Brick fly ash concrete block masonry in superstructure above plinth level up to floor V level
5
39
195
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfast in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand / M sand : 6 graded stone aggregate 20mm nominal
-
-
-
... More
Door Chowkhats
2
1366
2732
... More
Window Chowkhats
2
855
1710
... More
Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dia. Bolts, Nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand / M sand : 6 graded stone aggregate 20 mm nominal size)
10
197
1970
... More
6mm Cement plaster to ceiling of mix : 1:3 (1Cement : 3 Fine sand / M sand )
10
227
2270
... More
12 mm cement plaster of mix : 1:4 (1 Cement : 4 Fine sand / coarse sand / M sand)
50
283
14150
... More
15mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 Cement : 4 Coarse sand / M Sand)
50
330
16500
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 coarse sand / M Sand)
10
435
4350
... More
Making and neatly finishing of 25mm wide sunshade band/ border on plastered surface with C.M. 1:3 (1 cement :3 Fine / M sand) including necessary finishing etc. complete as per direction of Engineer in charge.
10
71
710
... More
Providing and Fixing colour anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS :733 and IS 1285, fixed with rawl plugs and scews or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / Stainless steel screws, all complete as per architectural drawings and the directions of Engineer - in- charge. (Glazing and panelling to be paid for separatelly) For fixed portion Anodised aluminium (anodised transport or colour anodized dyed to required shade according to IS 1868, Minimum andioc coating of grade AC 15)
50
519
25950
... More
For shutters -Providing and Fixing colour anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS :733 and IS 1285, fixed with rawl plugs and scews or with fixing clips, or with expansion hold fasterns including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / Stainless steel screws, all complete as per architectural drawings and the directions of Engineer - in- charge. (Glazing and panelling to be paid for separatelly) For Shutters Anodised aluminium (anodised transport or colour anodized dyed to required shade according to IS 1868, Minimum andioc coating of grade AC 15)
50
563
28150
... More
Providing and fixing of aluminum colour powder coated (20 micron) ornamental grill for window using 50x50mmx6mm size opening fixed on aluminum frame with heavy duty aluminum U channel with all-round of grill and the rate including labour and material. (the rate of frame will be paid seperately) (Alumnium grill weight shall not be less than 2.95Kg/ Sq).
10
2140
21400
... More
Providing and fixing Aluminium Louver with adjustable channels for the ventilator opening in the partition. The adjustable mechanisum of appropriate size and Jindal make including necessary screws etc. complete.
1
1533
1533
... More
Supply and fixing of aluminum Awning with U4 panels of 84mm wide 16mm deep and 0.05mm to 0.56mm thick special aluminum alloy. The aluminum panels shall be coated with aliphatic polyurethane paint (MRF) on both sides, after giving a coating of etching primer to protect the paint from ULTRA VIOLET RAYS, Panel carriers shall be 79mm wide and 48 mm deep. 0.5 thick steel carriers, and cut to standard size of 3 mtrs. Carrier shall be powder coated, MS Angle with enamel brush painting - 35 mm x 3 mm Angle with 10 mm expansion bolt. (Rate inclusive of GST, gutter charges and delivery charges)
2
4869
9738
... More
Providing and fixing Aluminium composite panel of 4mm thick ( M/s Virgo or equivalent) for roofing / cladding. The ACP shall be fixed over the frame work made out of Aluminium box sections or steel section with adequate support and fixed to the frame using Anchor fasteners together with necessary screws and bolts and nuts and the grooves shall be sealed with Silicon Sealant etc. complete as directed by the Engineer-in-charge. (Cost of the frame shall be paid separately).
2
4778
9556
... More
Supplying and fixing GI base clamp of all size (galvanised) for laying/ fixing pipe lines of various diameter on walls, the rate inclusive of necessary U-clamp for fixing pipes, anchour fastner for fixing the clamp etc complete. The measurement will be made based on the actual weight of the clamp and necessary bolt.
2
189
378
... More
Providing and fixing MS round or square bars at required spacing in wooden frames of windows and clerestory windows
5
123
615
... More
Providing and fixing of 16mm dia SAFETY STUD ANCHOR HST3 M16X145 45/25 Hilty Expansion Fastener including necessary drilling of beam concrete etc complete at all levels as per the direction of Engineer in charge.
5
651
3255
... More
Supplying and fixing of 450mm width G.I. Pipe ladder with 40mm dia G.I. Pipe vertical supports, 20mm dia G.I. Pipe horizontal supports for tread at 300mm c/c with 840mm height both side hand railing, top, bottom and middle are supported by 50mm dia G.I. pipes, grouting on wall including two coats of enamel paint over a coat of primer etc., complete as per IS specification.
5
122
610
... More
Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitred and welded with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement: 3 coarse sand / M sand: 6 graded stone aggregate 20mm nominal size).
5
191
955
... More
Structural Steel work welded in built up sections / tubular sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer (Zinchromite primer) all etc
50
126
6300
... More
Providing and fixing of Mild Steel chequered plate for steps / cable trenches with necessary cutting, welding and edge grinding etc using grinding machine over welded the required angles and stiffeners and making holes etc complete as per the direction of Engineer in charge.
5
129
645
... More
Providing and fixing stainless steel ( Grade 304) railing / gate / frames made of Hollow tubes, channels, plates, hinges etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
20
664
13280
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm and braced with flat iron diagonals 20 x 5 mm size with top and bottom rail of T iron 40 x 40 x 6 mm with 40 mm dia., steel pulleys complete with bolts, nuts as directed by the Engineer in charge in all levels.
2
9147
18294
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
10
2925
29250
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 10.00 sqm and up to 16.80 sqm in the area
1
761
761
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 16.80 sqm in area
1
803
803
... More
Repairing rolling shutter by replacing the old damaged or worn out parts like bearing, Gears, shafts, laths, springs and applying wax to all parts and making into good condition etc complete.
10
1377
13770
... More
Providing and fixing / replacing the existing ball bearing for rolling shutters
1
534
534
... More
Fixing standard steel glazed doors, windows and ventilators in walls including fixing float glass panes with glazing clips (Only concrete and labour for fixing) - Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4
60
240
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(M/s Jindal or equivalent with ISI marks)
5
758
3790
... More
Providing and fixing pre-coated Galvanizes sheet roofing accessories 0.50mm +- 5% total quoted thickness (TCT) zinc coating 120 GSM as per IS 277 in 240 MPa steel grade 5-7 micron epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling by self tapping screws or with polymer coated Z or L hooks bolts and nuts and GI seam bolt and nut, GI plain and bitumen washer complete at all levels.
-
-
-
... More
Ridge plate (500 to 600 mm)
1
785
785
... More
Flashing up to 600mm
1
742
742
... More
North light
1
802
802
... More
Barge board up to 300mm
1
701
701
... More
Crimp curve
1
767
767
... More
Gutter (600mm overall girth)
1
1102
1102
... More
Providing and fixing precoated Galvalume profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with Aluminium zinc coating 150 grams per sqm total of both sides in 345MPa yield stress Galvalume steel. The steel should be prepaintted with factory polyster paint of thickness 1 mil thick including 5-7 micron epoxy primer and brough to site with protective gaurd film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size as required for fixing clips hex head faterners with EPDM seal for end laps silicon sealent etc. complete so as to make the roof water proof upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including making opening in required sizes for fixing self circulted exhaust fans (Turbo Ventilators) etc. as dited by Engineer in charge.
5
758
3790
... More
Providing and fixing multi wall lexan compact poly carbonate sheet of 6mm thick over the truss work. The joints shall be treated with aluminum profile, rubber beadings and silicon sealants every joints with necessary screws including self tapping screws for sheet fixing and etc complete as per the manufacturers specifications. The rate inclusive of labours material for jointing between each sheet etc complete at all levels.
5
2002
10010
... More
Providing and fixing 8mm tk acrylic sheet after necessary buffing to make it opaque for urinal partition with 2 Nos. SS brackets, Clamps Size 0.60x1.22m etc. complete as per the direction of Engineer in charge.
2
3385
6770
... More
Providing and fixing 8mm tk acrylic clear sheet with necessary buffing if needed to be fixed as panel for Aluminium doors or windows etc. complete as per the direction of Engineer in charge.
2
2600
5200
... More
Supply & installation of Anutone / Ecophone / Armstrong wooden grooved - Salon Slats Lite L16-2 of size 128mm x 2430mm x 16mm thick coloured finish, backlined with acoustical fleece fixed by using CC22 spaced at 600mm centers & GI channel CC18 spaced at 400mm centers with suitable brackets and the system is backlined with Synth 5x25mm thick adhered by using suitable adhesive to give NRC of 0.75. Extra wooden supports to be given to bring the panels in desired levels.
2
9049
18098
... More
Supply and installation of Anutone / Ecophone / Armstrong Strand panel of size 600 x1200 x 20mm thick square edge. The system shall consist of pre-fabricated high density strands core. Panels are installed on Anutone Strut channels CC-50 having knurled web by using suitable fasterners. Installed panels are backed with 10 x 50mm poly wool. Vinyl tracks SE15 (Midseam & half wrap) is fixed at 1200mm centers and perimeters or as per requirement of the designon top of 12mm ply wood reaper. Anutone Cara fabric is then stretched over Smooth Panels by using Stretch Vinyl tracks and backlined with 5x25mm thick synth to achieve NRC of 0.85 across the frequency Range.
2
9049
18098
... More
Supplying and fixing "Daiken" Acoustical ceiling with regular grid system at all levels. Providing and fixing Daiken mineral fiber ceiling tiles, false ceiling with hot dipped galvanized steel grid work. Surface chemicals cleaned capping pre-finished in baked polyester paint main tiles of size 600x600mm as per manufacturer specification.
5
1482
7410
... More
SPECIFICATION FOR ARMSTRONG / DAIKEN “METAL LAY-IN STANDARD-PERFORATED TILES (SIZE : 600MM X 600MM) WITH ARMSTRONG SILHOUETTE EXPOSED GRID” SYSTEM Providing & Fixing of Armstrong Orcal Lay in Micro- Perforated metal ceiling System consisting of 600mm x 600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in white colour with perforation of 2.5mm dia & open area of 16% with acoustical fleece with NRC of 0.70 on the back of the tile to be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in black colour. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. The 1200mm cross tees to have central “birdsmouth” notches to facilitate fitting of 600mm cross tees. Perimeter trim to be Armstrong shadow wall molding (dimensions:19x7x7x14mm)
2
3214
6428
... More
Providing and fixing of grid beam type gypsum board false ceiling 12mm thick with necessary GI channel frame work as per the manufacture specifications and joints neatly finishing and two coat painting with emulsion paint etc. complete as per the direction of Engineer in charge.
4
1272
5088
... More
Providing and fixing of Glass fibre / chicken mesh for drops including necessary nail and labour for cutting and fixing mesh etc. complete.
2
184
368
... More
Providing and fixing of MS weld mesh safety shutter by using MS weld mesh of 2"x2"(16 gauge) welded with MS angles all-round with 20x6mm flat MS angle fixed with the support including one coat of zinc chromate primer and etc., complete
5
3185
15925
... More
Providing and fixing of 75mm x 25mm size MS weld mesh panelling for window shutter with second class Teak wood beadings (69mmx19mm) all-round the shutter mesh including necessary primer coat ,screws, nails etc., complete (Wood work for shutter frame will be paid separately).(steel wire fabric not less than 7.75 Kg per sqm )
1
1725
1725
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using galvanized M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of diameter 0.63 mm With 2nd class teak wood beading 62X19 mm.
1
1150
1150
... More
Providing and fixing Galvanized wire mesh of average width of aperture 1.4mm and nominal dia of wire 0.63mm to window and ventilator including country wood reapers of size 2"x1" and painting neatly and repair works etc. complete.
5
1614
8070
... More
Supplying and fixing Pvc coated GI wire thickness not less than 2mm at all levels for cloth hanging.
5
30
150
... More
Providing and fixing fly proof Stainless steel (SS304 )wire mesh (1.4mm size aperture and 60.32gms/Sqm) to windows, ventilators and doors with necessary all-round teak wood beading / aluminium frame and etc. complete as per direction of Engineer in charge. (the cost for wooden work / aluminium frame will be paid separately)
5
694
3470
... More
Providing and fixing M.S. grills of required pattern in frames of windows, etc. with M.S. flats, square or round bars etc. all complete Fixed to openings / wooden frames for windows with rawl plugs, screws, etc. or welding to the existing grills. The rate inclusive of applying priming coat with red oxide zinc chromate primer.
20
203
4060
... More
Labour charges for cutting, welding, alteration and refixing in position for existing weld mesh / grill with additional MS clamps welded to the existing frame supports including all materials, tools and plants, welding rods etc complete as per the direction of Engineer in charge.
5
850
4250
... More
Replacement of weld mesh in doors, windows and ventilators using mesh of 2"x2"/ 2" x1"/ 1/2"x1/2"/ 1"x1/2. The charges inclusive of labour, material such as teak wood beading, nails, screws, putty etc., complete (dia of wire mesh 1.6mm).
5
1761
8805
... More
Flooring repair: Repair to existing flooring after removal of damaged flooring, cutting the flooring to a regular shape, restoring the surface to original level, colour and shade using appropriate material. The work should be done strictly as per the CPWD specification of work for flooring. Cement concrete flooring of all thickness as per the specification. C.C flooring - Area up to 1.00 sqm.
5
268
1340
... More
Flooring repair: Repair to existing flooring after removal of damaged flooring, cutting the flooring to a regular shape, restoring the surface to original level, colour and shade using appropriate material. The work should be done strictly as per the CPWD specification of work for flooring. Cement concrete flooring of all thickness as per the specification. C.C flooring - Area up to 1.00 to 2.00 sqm.
5
804
4020
... More
Flooring repair: Repair to existing flooring after removal of damaged flooring, cutting the flooring to a regular shape, restoring the surface to original level, colour and shade using appropriate material. The work should be done strictly as per the CPWD specification of work for flooring. Cement concrete flooring of all thickness as per the specification. C.C flooring Area up to 2.00 to 3.00 sqm.
2
1341
2682
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand / M sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. upto 50 mm and minimum of 40mm thick with 20 mm nominal size stone aggregate
8
532
4256
... More
Add Extra for making chequers of approved pattern on cement concrete floors, steps, landing , pavements etc
5
56
280
... More
Cement plaster skirting (up to 30 cm height) with Cement 1 : 3 (1 Cement : 3 Coarse sand / M sand) finished with the floating coat of neat cement 18 mm thick
5
503
2515
... More
Power trowelling over the concrete surface to get even finish. The rate inclusive of charges for fixing channel as per the approved design of engineer incharge for using screed vibrator.
5
135
675
... More
Stamped CC-Providing and laying , Stamp Concrete using LDPE sheet as base with adequate formwork and 5 component system. This is consisting of,Min 100 mm thick M35 grade concrete (cost of concrete will be paid seperately escept finisging required for stamp cc) on top of which (1) Pigmented Color Hardener (2) Powder release agent to impart color and impression to the surface. After completely washing (3) Liquid color to be applied along with (4) Color binder to attain shadow impact and seal the concrete floor with color binder. Finally (5) Sealer Gloss / Matt applied. Pattern & color are as per approved by Architect/ Customer from the shade card provided by Lafarge.
1
1684
1684
... More
Providing and laying floor first quality antiskid ceramic tiles (Johnson/Kajaria/Somany/RAK) for floors of size 300x300x7mm or higher size and minimum thickness of approved shade and pattern in flooring for toilet on bed plaster CM 1:4 (1 cement: 4 coarse sand / M sand), 20mm thick with sieved sand mixed with approved water proofing compound including pointing the joints with white cement and matching pigment etc., complete.
5
1206
6030
... More
Providing and laying Ceramic glazed floor tiles Johnson/Kajaria/Somany/RAK for rooms, floors of 300x300 mm or higher size and minimum thickness of approved shade and pattern in flooring over a bed plaster on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 coarse sand / M sand) including pointing the joints with white cement and matching pigment etc., complete.
5
1153
5765
... More
Providing and fixing 1st quality ceramic glazed wall tiles of size 300x200mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved making all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand / M sand) and jointing with grey cement slurry @ 3.3kg per sqm , including pointing in white cement mixed with pigment of matching shade complete.
10
1355
13550
... More
Wall tiles repair / replacements of tiles provdided for dado / floor work in WC / bath room, kitchen etc using matching tiles of same quality, colour and shade with necessary removal of damged tiles etc complete. The tile may be pasted using cerabond or as per the direction of the engineer in chrage. Glazed tile - colour / white ceramic tiles - up to 1.5 sqm area.
5
1276
6380
... More
Providing and fixing of border tiles in bath room made of ceramic embossed designed tiles of size 80mmx100mmx7mm or standard size available in the market as per direction of Engineer- in- charge (Johnson/kajaria/somany/RAK).
5
441
2205
... More
Providing and laying vitrified floor tiles in 60x60cm, 10mm thickwith water absorption less than 0.08%and conforming to IS : 15622, of approved make (marbonite, in all colours andshades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand / M Sand), excluding grouting the joints with white cement or matching pigments etc., complete. Make Johnson/Khajaria/Somany
5
1504
7520
... More
Supplying and fixing Eurocon/Gripton/Beton or equivalent step tiles of approved make and pattern from pavement series for external / internal flooring over 20mm thick cement mortar 1:4 (1 part cement 4 part sand / M sand) bed, jointed with cerafil as equivalent matching pigments to match the color of the tiles as directed by the Engineer-in-charge etc., complete
5
2737
13685
... More
Providing and Laying of RECTIFIED tiles of Johnson/Khajaria/Somany size 400x400x7mm or higher size neatly laid in cement mortar 1:4 (1 part cement 4 part sand / / M sand) 20mm thick of equivalent joint finished with matching colouring pigments to match the colour of the tiles rate to inclusive of laying and preparation of existing surface by hacking etc., complete all floors
5
1271
6355
... More
Providing and Laying of RECTIFIED tiles of Johnson/Khajaria/Somany size 600x300x7mm or higher size neatly laid in cement mortar 1:3 (1 part cement : 3 part sand / M sand) 12mm thick of equivalent joint finished with matching colouring pigments to match the colour of the tiles rate to inclusive of laying and preparation of existing surface by hacking etc., complete all walls / dado.
5
1354
6770
... More
Providing and fixing fully VITRIFIED industrial tiles of M/s Endura grey colour or approved colour of 12mm thick for walls and floors (up to required height and level) of size 300X300X12mm neatly laid over tile fixing or laid in cement mortar 1:3 (1 part cement 3 part sand / M sand) , 20mm thick. The rate inclusive for providing spacer of 5mm thick between the tiles while laying and removing the spacer for laying grout. The cement mortar should admixed with SBR latex of 3kg per bag of cement . Rate inclusive of materials, labour charges at all levels. Rate inclusive of Grouting the tile joints with Laticrete products- Applying Latapoxy SP100 (Grouting of tiles to be done with MYKL Laticrete Latapoxy Sp100 stain free grout as per the methodology specified in the technical data sheet of MYKL. 5mm width grout to be provided between tiles to fill the joints. 1 Unit = 5 Kgs. Coverage: 5.10 Sq.mt.. per Unit ) in the tile joints. The rate inclusive of surface preparation, labour, material, tools and plants etc complete. Rate inclusive of materials, labour charges at all levels. Including cost of spacers.
2
2241
4482
... More
Providing and laying fully VITRIFIED industrial tiles of Endura grey colour or approved colour of 15mm thick of size 300X300X15mm neatly laid over tile fixing or laid in cement mortar 1:3 (1 part cement 3 part sand / M sand) , 20mm thick. The rate inclusive for providing spacer of 5mm thick between the tiles whil laying and removing the spacer for laying grout. The cement mortar should admixed with SBR latex of 3kg per bag of cement. Rate inclusive of Grouting the tile joints with Laticrete products- Applying Latapoxy SP100 (Grouting of tiles to be done with MYKL Laticrete Latapoxy Sp100 stain free grout as per the methodology specified in the technical data sheet of MYKL. 5mm width grout to be provided between tiles to fill the joints. 1 Unit = 5 Kgs. Coverage: 5.10 Sq.mt.. per Unit ) in the tile joints. The rate inclusive of surface preparation, labour, material, tools and plants etc complete. Rate inclusive of materials, labour charges at all levels. Including cost of spacers.
2
2234
4468
... More
Add extra for providing spacers of 3mm thick for laying ceramic/vitrified tile flooring and grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout with cerafil (Epoxy germ proof joint grout) or equivalent mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Instead of ordinary pointing for the tile various size.
-
-
-
... More
For tile size up to 30x30cm and upto 44.5x44.5cm
5
455
2275
... More
For tile size up to 45x45cm and upto 59.5x59.5cm
5
345
1725
... More
For tiles above 60x60cm
5
235
1175
... More
Providing and fixing 20mm tk Kota stone slab over 20mm (Average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 (1 Cement : 4 Coarse Sand / M sand)
5
1545
7725
... More
Polishing of Kota stone flooring/ marble flooring/ mosaic flooring etc by grinding and honing of floor using diamond abrasives to remove all minor scratches to bring an even surface. Later hardening the surface with floor polishing powders. The floor will be burnished with 1200 RPM burnishes.
5
389
1945
... More
Providing and fixing homogeneous polyvinyl chloride sheet / tile in flooring and skirting in approved pattern on a smooth and damp proof base using rubber adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 2.0mm thick (Brand Wonderfloor / Amstrong or equivalent brand with ISI mark).
5
973
4865
... More
Providing Antistatic poly vinyl Button model flooring sheets in approved pattern on a smooth and damp proof base using rubber adhesives of approved quality and manufacturer specification, Fevicol SR 998 2.0mm thick as per the direction of Engineer in charge. (Brand Wonderfloor / Amstrong or equivalent brand with ISI mark).
5
1330
6650
... More
Providing and laying of 18mm thick Mirror polished Raw silk Granite laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand / M sand) with pointing of the joints in matching pigment and etc complete as per the direction of Engineer-in charge - Area of slab up to 0.50sqm
5
3640
18200
... More
Providing and fixing 18mm thick mirror polished, machine cut Granite for kitchen platforms, vanity counters, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand / M sand) Granite black Area of each slab above 0.50 sqm
5
3175
15875
... More
Providing and fixing machine cut and machine polished yellow colour granite slab/ flame granite for staircase step and riser as required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand / M sand) and etc complete as per the direction of Engineer-in-charge.
5
5714
28570
... More
Providing and fixing of corner piece of 18mm thick granite slab of shape square or round of size 30cmx20cm with necessary edge moulding in toilet and laboratory including chasing of wall and grouting the same to match the existing surface and colour etc.,
5
699
3495
... More
Extra for providing edge moulding to 18mm thick stone counters, vanities etc., including machine polishing to edge to give high glass finish etc., complete as per design approved by Engineer - in – charge Granite work
5
334
1670
... More
Making and Cutting of oval shape / round opening in the granite for fixing wash basin / sink and neatly finishing etc complete as per the directions of Engineer in charge.
5
1192
5960
... More
Supplying and fixing Daiken HDF laminate floorings 1210x193x8.3mm of size fixed on floors by tongue and grove joints after placing one layer of fiber wool. The rate inclusive of labour for beading, Lprofile, inlcuding adhesives, LDPE sheet, laying, hire charges for tools and plants and other overheads etc complete.
1
2500
2500
... More
Providing and fixing Non Woven Fabric carpet sheet in flooring of approved pattern on a smooth and damp proof base using rubber adhesives of approved quality and manufacturer, Fevicol SR 998 or Equivalent including rolling with light wooden roller weighing about 5kg all complete as directed by Engineer-in-charge,
1
1912
1912
... More
Supplying and fixing F.R.P- Covered type (Fiber glass Reinforced Plastic) moulded gratings with perforation covered with FRP sheet manufactured with continuous fiberglass strands, thoroughly wetted with chemical resistant polyester resin, interwoven between each other forming a one-piece structure by means of an exclusive mechanized processor (TEKNOTEX) with following finishes Surface : Anti-slip surface with integrated quartz grit Colour : yellow / blue Height : H38 Mesh : 38mmx38mm x (7mm top, 5mm in bottom) Dimension :3mx1m(Length x Width) The rate inclusive of labour and tools for cutting the gratings to fit in the existing gutter, wastage etc complete. The contractor should also give warranty for 7 year for the product in the form of bank gurantee.
5
7933
39667.1
... More
Supplying and laying of 60mm thick M30 grade Interlocking concrete blocks (rubber moulded) of various design including perforated / grass paver blocks tested in accordance with BS6717 Part-I, 1986; manufactured using homogeneous designed concrete mix, vibro-compaction process, weigh batching and high speed pan mixing suitably cured in controlled conditions and laying the same over a 50mm thick M-sand bedding layer level and slope etc.,
10
1078
10780
... More
Add extra for laying 80mm thick cement concrete paver block instead of 60mm over the above item.
5
120
600
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
20
108
2160
... More
Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand / M-sand, filling the joints with fine sand etc. all complete as per the direction of Engineering-charge. (Old CC paver blocks shall be supplied by the department free of cost).
10
404
4040
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand / M sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
2
13334
26668
... More
Brick pitching with cement concrete bricks of grade M10 or higher grade using cement mortar 1:4 (1 cement : 4 Sand / M sand) over the existing drain. The rate inclusive of earth excavation, surface dressing, laying of 10cm thickness of sand, pointing etc complete. The brick should be laid in header bond to get a minimum thickness of 115mm. The measurement for the brick pitching will be paid as per the internal surface area of the drain including side kerb. With fly ash concrete blocks class designation 100
3
1632
4896
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
3
137
411
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
5
20
100
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
5
619
3095
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 4.5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
1
10703
10703
... More
Providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per directions of Engineer-in-Charge. 40/50mm compacted thickness with bitumen of grade VG-30@5.5% (percentage by weight of total mix) and lime filler @3%(percentage by weight of aggregate) prepared in Batch Type Hot Mix Plant of 100-200 TPH capacity. Rate including laying tavt coat vide clause 503 of MORTH specifications (Table 500-5) for road and Bridge Works, Fifth Revision, 2013.
1
11841
11841.33
... More
Providing and applying tack coat using bitumen emulsion RS conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. On bituminous surface @ 0.25 kg/ sqm. as per MORTH specification No.503
6
20
120
... More
Providing and applying prime coat using bitumen emulsion RS conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. On W.B.M / W.M.M. @ 0.4 kg/ sqm. as per MORTH specification No.502
5
30
150
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
1
562
562
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
5
3648
18240
... More
Lime concrete terracing on roofs average thickness 10 cm laid to fall with 25 mm nominal size brick aggregate and 50% lime mortar 1 : 2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions etc complete at all levels.
2
737
1474
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and approved size) on roofs jointed with cement mortar 1 : 4 (1 Cement : 4 Coarse sand / M sand) mixed with 2% of integral water proofing compound (CICO/ROFF) laid over a bed of 20 mm thick cement mortar.
2
728
1456
... More
Supplying and fixing LDPE black color sheet of 400 microns thick for laying the concrete.
5
172
860
... More
Demolishing lime concrete and disposal of material within 50m lead.
2
540
1080
... More
Demolishing cement concrete including disposal of material within 50m lead
-
-
-
... More
1 : 3 : 6 or richer mix
1
1546
1546
... More
1 : 4 : 8 or leaner mix
1
954
954
... More
Demolishing Brickwork including stacking of serviceable material and disposal of unserviceable material within 50m lead in cement mortar
2
1307
2614
... More
Dismantling doors, windows and clerestory windows (Steel or wood) shutter including chowkhats, Architrave, Holdfasts, etc. complete and stacking within 50m lead : of area 3 sqm and below
2
240
480
... More
Dismantling doors, windows & clerestory windows shutter including chowkhats, of area beyond 3 sqm
2
328
656
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead For thickness of tile 10mm to 40mm
3
48
144
... More
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 m lead of : Asbestos sheet
1
50
50
... More
Dismantling G.I./ CI Pipes (external work) including excavation and refilling trenches after taking out the pipes,
-
-
-
... More
15 mm to 40 mm nominal bore
2
98
196
... More
above 40 mm nominal bore
2
108
216
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead
2
34
68
... More
Demolishing RCC work by mechanical/manually including stacking of steel bars and disposal of unserviceable material within 50m lead.
2
2256
4512
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the materials within 50 m lead
-
-
-
... More
75 mm to 80 mm dia pipe
2
48
96
... More
100 mm dia pipe
2
50
100
... More
150 mm dia pipe
2
51
102
... More
Dismantling and stacking with in 50m lead Fencing post or struts including all earth work and dismantling of concrete in RCC etc complete.
2
174
348
... More
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50m lead
10
23
230
... More
Labour charges for removing broken defective flushing cistern and replacing and refixing after repairing with brackets fittings etc complete. For low level PVC flushing cistern 10 litre capacity. (Parryware / Hindware/ Somany)
2
691
1382
... More
Labour charges for dismantling and removing the broken / hanging wash hand basin of any size & replacing refixing the wash hand basin in position including plumbing works replacing the wooden plug etc. complete.
2
382
764
... More
Labour charges for dismantling and removing the existing water closet including debris cleaning up to lead of 50m lead.
2
427
854
... More
Labour charges for dismantling old wash basin with bracket, urinal basin with clamps flush tank with clamp / bracket (both low and high level tank), old E.W.C / I.W.C with traps, G.I pipes, fittings and taps in old toilet, etc and stacking the material.
((Parryware / Hindware/ Kohler)
2
340
680
... More
Labour charges for removing the broken / kitchen / lab sink (Porcelain/mosaic) and refixing the old / fixing new sink with necessary G/I brackets waste coupling, waste pipe etc complete.
2
319
638
... More
Labour charges for fixing washer/spindle to bib cocks/pillar cocks etc.,
3
35
105
... More
Preparing and washing the wall tiles using approved chemical agents and soap oil including necessary brushes and filling the tiles gaps with white cement wherever necessary and etc complete as per the directions of Engineer in charge.
1
33
33
... More
Labour charges for removing the Vertical blinds carefully and Refixing the same after servicing including necessary screws etc complete as per the direction of Engineer in charge
2
200
400
... More
Repairing damaged furniture's like benches in class rooms, tables, stools, chairs etc: Replacing the damaged / decayed novopan / Ply wood of thickness up to 20mm/ bushes etc complete for furniture’s including cost of material such as fevicol, nails, screws etc complete. For the ply wood work surface shall be made to match with existing surface finish such as mica of 1mm thick or enamel paint or French spirit polishing.
1
1371
1371
... More
Removal and replacing SS / Aluminum powder coated door fittings such as damaged tower bolts (upto a size of 300x10mm), handle (75mm to 125 mm), Hinges (Upto a 125x75x 4mm ) hook and eye, catch, cupboard locks upto 75mm etc., complete of various sizes and material using necessary screws. The material like tower bolt, necessary screws have to be arranged by the contractor (the sizes indicated for fittings are maximum).
2
108
216
... More
Labour charges for cutting the windows and door frames to required height and altering the shutter to the required size and fixing in position etc., complete
2
1607
3214
... More
Repairing and refixing the existing window / door shutters by replacing the damaged style, rails etc and making into serviceable condition for all types of windows, doors the rate only for labour charge, necessary additional payment for the materials like wood and fittings will be paid separately
2
1993
3986
... More
Repairs to Aluminum Joineries: Repairing the aluminum doors, windows and ventilators including charges for replacing damaged sections, pivots, hinges, tower bolts, door stopper, handles, rubber beading, aluminum clips, PVC/ Neoprene felts hooks and eyes, CP brass / SS screws, aluminum snap beading for glazing/ paneling etc complete including charges for lubricating the same after repairs works. (No material will be issued by IITM)
2
213
426
... More
Dismantling existing aluminum partition with door / door and refixing the same at different location as per the direction of the engineer in charge. The rate includes labour charge for additional alteration and repairs, replacing the damaged parts, altering the existing design etc., wherever required etc.
2
1033
2066
... More
Labour charges for dressing the butting edges of unfitted door / window / ventilator shutters and replacing the same in good condition and make it to open and close freely including removing the worn out hinges by replacing / refixing new hinges wherever required.
2
178
356
... More
Charges for fixing of Notice board, book shelves, name boards including providing necessary clamps and screws, nails by using drilling machine for making holes and wooden plugs etc complete as per the directions of Engineer in charge.
2
417
834
... More
Labour charge for repairing the aluminum door /window by removing and replacing the damaged section, beading, fittings and making the good the disturbed portion etc., The rate excluding the cost of fitting and aluminum section and glass panes but including cost of PVC / neoprene gasket etc,
2
686
1372
... More
Supplying and fixing of "U" rubber for aluminum doors including necessary screws and fittings etc complete.
2
72
144
... More
Supplying and fixing of Aluminum beading in glazed portion in aluminum doors including removing the existing beading with necessary screws and fittings etc complete.
2
100
200
... More
Supplying and fixing of glass beading in glazed portion in Aluminum doors including removing the existing beading with necessary screws & fittings etc complete in doors/windows not exceeding 3 sqm.
1
602
602
... More
Supplying and fixing of PVC gasket including fixing to sliding Aluminum windows etc complete.
2
566
1132
... More
Labour charges for removing and refixing the existing false ceiling wherever damaged etc. The rate is including replacing GI channel, tiles, labour etc. complete.
2
264
528
... More
Providing and neatly finishing of 300mm dia exhaust fan holes and above with necessary scaffolding, plastering and painting to matching the existing finishing etc., complete as per the directions of Engineer in charge.
2
1516
3032
... More
Making opening in brick masonry including dismantling, fixing chowkhats in floors or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement : 3 coarse sand / M sand : 6 graded stone aggregate 20mm nominal size) for door / window
2
842
1684
... More
Cutting holes up to 30 x 30 cm in walls including making good the same With F.P.S. bricks
2
528
1056
... More
Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand / M sand : 4 graded stone aggregate 20 mm nominal size)
2
362
724
... More
Making chases up to 7.5 x 7.5 cm in walls including making good after housing G.I. Pipe etc.
2
107
214
... More
Making hole up to 20 x 20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand / M Sand : 6 graded stone aggregate 20 mm nominal size)
2
216
432
... More
Providing Mechanical core cutting up to 300mm depth 75 to 150mm dia for fixing pipes air cleaning for cutting holes removing of debris and labour charges etc.., complete
1
1672
1672
... More
Cutting grooves by using power cutter for a size of 4mm wide and depth of 100mm at the road concrete as per direction of Engineer in charge.
1
457
457
... More
Hire Charges for Tractor carting of various materials, furniture’s, machineries, accessories, waste materials including loading, unloading and transporting etc., complete within the IITM Discovery campus Premises.
10
846
8460
... More
Supplying and Erection of Double Scaffolding (Area shall be calculated by multiplying length and height of scaffolding) for carrying out of miscellaneous works at all levels and etc., complete as per Indian Standard or relevant codes. Rate inclusive of providing necssary covering the area with suitbale safety net etc.,
10
249
2490
... More
Hire charges for providing temporary barricading using GI corrugated sheet to a height of 3m. The GI corrugated sheets of 0.4mm thick shall be fixed to the framework made out MS pipe frame work as per the direction of Engineerincharge. The bottom of barricade should be covered with green garden net up to a height of 0.60m.
5
596
2980
... More
Providing and fixing PVC Green mesh of (size 25x25mm opening) fabric fencing including cutting and fitting, etc as required complete as per the direction of Engineer-in-charge.
2
732
1464
... More
Providing and fixing R.C.C fencing post using concrete 1:2:4 and using steel 4 nos 8mm dia bar at vertical and 6mm stirrups at 150 c/c including necessary centering and shuttering , labour, material etc complete. ( size of post 2.10 m lengthx bottom 150mmxtop 100mm)
1
827
827
... More
Repair and reifxing of chain link fencing including tying, providing horizontal GI wires etc complete.
2
125
250
... More
Supplying fixing chain link fencing of gauge 12 (not more than 50x50mm size) , including providing three rows of horizontal GI wire at every 1 m interval. The rate inclusive of necessary fixing charges etc complete.
5
612
3060
... More
Supplying, fixing and tying Repairing GI Barbed wire fencing wherever damaged fencing parts of OAT including necessary binding wire and etc. complete as per the directions of Engineer incharge.
25
38
950
... More
Labour engagement for unmeasurable items of works such as masonry touch up works, cleaning works, machinery, lab equipment and materials shifting to enable taking up the renovation woks as per the direction of Engineer in charge.
-
-
-
... More
Helper / Cooliee
5
664
3320
... More
Mason
5
933
4665
... More
Carpenter
5
933
4665
... More
Plumber
5
933
4665
... More
Painter
5
775
3875
... More
Water Proofing Works:
-
-
-
... More
Marking and providing of 20mm dia holes at 150mm depth by using heavy duty drilling machine to insert 16mm dia reinforcement rods and grouting of cement slurry for providing concrete walls including cleaning of holes by using Air compressor and etc complete as per the direction of Engineer in charge.
2
88
176
... More
Arresting seepage of water from wall surface, from the junction of chujjas, weather shade, cantilever ends, corbels and wall at sill level of windows, jambs of windows etc complete including necessary Grouting, grooving, applying sealant to the openings near Door/window frames plastering, painting etc complete including charges for necessary water proofing sealant 10mm to 20mm depth in concrete slab by power cutter and fixing the SBS membrane in the groove by using sona elastic sealant or thioflex 600 gun grade as per the direction of the Engineer in charge.
2
233
466
... More
Providing and fixing of 25 to 50x4mm poly-urathane Sealant of FOSROC/ BASF/ SIKA/ FABCHEM for Expansion joints including fixing leaky piece etc.
5
531
2655
... More
Preparing the surface and applying Nito bond EP or equivalent coatings mixed with cement at the ratio 1 lit/Kg in each layers and applying for bonding the old and new concrete for walls, floors, columns, beams, slabs at all levels as per the direction of Engineer in charge.
5
904
4520
... More
Providing polymer modified coving floor wall junctions using CM 1:4 admixed with Nito bond AR / SBR @ 1.5 lts per bag of cement complete as per the manufacturer's specifications
2
387
774
... More
Providing polymer modified mortar of CM 1:4 (1 Cement : 4 fine sand / M sand) of 30 mm in two coats ( each coat of 15mm thick) admixed with Nitobond SBR @ 6lts per bag of cement including applying a polymer based bonding agent Nitoband SBR @ 1:1:4 ratio on the plastered surface ( one part of Nito bond AR one part of water and four part of cement)- This is for the walls and floor.
5
1083
5415
... More
TECHNICAL SPECIFICATION / WORK METHODOLOGY FOR WATERPROOFING OF SUNKEN PORTIONS
1. The BrickWall-Floor junctions and other construction joints to be cut open to a V-groove of size 25mm X 50mm and reinstated with BASF make - Rheomix 141 - SBR Polymeric modified Cement mortar (CM 1:4) at a dosage of 2 ltrs per cement bag.
2. Necessary pipe chasings and outlets to be ear-marked and completed well before starting our waterproofing treatment.
3. The Floor and wall surfaces to be cleaned thoroughly without any traces of dirt or laitanace and applied with two coats of Masterseal 550 – two part acrylic modified cementitious polymer membrane coating to a thickness of 1mm, over the above prepared wall and floor surface as per the mixing, application and coverage recommendations of the manufacturer.
4. The above coated floor and wall surface to be overlaid with a protective plastering in CM 1:4, 20mm thick, admixed with BASF make Rheomac 707 – Integral waterproofing compound @ 150ml per Cement bag.
5. The Pipe outlet area to be provided with water-tight shuttering and filled with Non-shrink grout BASF make - Masterflow 918 as per the application procedures recommended by the manufacturer.
2
425
850
... More
TECHNICAL SPECIFICATION / WORK METHODOLOGY FOR PU INJECTION GROUTING
1. Holes of 10mm dia shall be drilled on the leakage/damp spot in the Ceiling of the R.C slab using a portable Electric drill and a non-return ball-valve packer shall be fixed in the holes.
2. Supplying and injecting PU based foam injection grout MEYCO MP355 1K – through the above fixed packers using a High-pressure one component Resin Injection pump until point of refusal. In case dripping of resin is observed through the packer hole, then the same shall be temporarily plugged with Masterseal 505 – Instant plugging compound. Note: Whilst we recommend the simultaneous injection of Acrylate Resin Masterflex 810 to stabilize the leak zone, this additional process would involve the fixing of an additional packer alongside the one fixed as in (1) above and the Acrylate resin Masterflex 810 shall be grouted with the same pump but after 24 hours of injecting Meyco MP355 1K.
2
3478
6956
... More
TECHNICAL SPECIFICATION / WORK METHODOLOGY FOR CEMENT BASED INJECTION GROUTING
1. Holes of 18mm dia shall be drilled on the leakage/damp spot in the Ceiling of the R.C slab using a portable Electric drill and a PVC nozzle of suitable size shall be fixed in it.
2. Injecting Cementitious Injection grout using Cement Slurry admixed with Flowcable 50 – Non-shrink grout additive @ 250gms per Cement bag, through the above fixed nozzle until point of refusal. The nozzle shall then be plugged with Masterseal 505 – Instant plugging compound.
3. The nozzles can be removed the next day and the hole shall be plugged with Masterseal 505 – Instant plugging compound.
1
170
170
... More
TECHNICAL SPECIFICATION / WORK METHODOLOGY FOR MICRO-CONCRETE/ NON-SHRINK CONCRETE
1. The affected concrete member shall be cleaned thoroughly by wire brush cleaning and washed with copious amount of water by high pressure water-jetting. 2. Exposed reinforcement bars – if corroded shall be cleaned by manual wire-brush cleaning and applied with Concresive ZRi – Epoxy Zinc rich primer or NITO ZINC (fosroc) as per the Technical and application recommendations of the manufacturer and allowed to dry for atleast 24 hours.
3. Supplying and Applying Concresive 1414 / Nitobond EP – Epoxy based Bonding Agent over the above prepared Concrete using a stiff brush as per the Technical and Application recommendations of the manufacturer. 4. Supplying and Pouring Emaco S46T / Rendroc HB2 – Cementitious Non-shrink, Micro Concrete into the erected formwork, for a nominal thickness of 50mm and whilst the above Bonding agent is tacky, and as per the Technical and Application recommendations of the manufacturer. 5. The formwork/shuttering shall be removed the next day and cured by placing wet hessain bags over the treated member..
1
40000
40000
... More
Preparing surface and applying BASF 1730 Master top water proofing Epoxy coating or equivalent as per manufacture specifications and etc complete as per the direction of Engineer in charge.
1
2031
2031
... More
Applying a coat of bituminous primer @ 0.3kg/m², by brush and Providing & laying APP membrane 5 or more layered 3mm thick, softening point not less than 1500C,tensile strength (L/T) N/5cm should be 650/450,lap joint strength (L/N) N/5cm 650/450, APP modified waterproofing membrane reinforced with 180 GSM non-woven polyester matt and without central separation layer of polyethylene film, skin layers top and bottom should be not more than 9 micron thickness, with 10cm over laps, by torch on application and applying a coat of bituminous based solar reflective aluminum paint @.0.3kg/m² including necessary surface preparation , cleaning with wire or coir brush, tools tackles labour etc., complete
1
492
492
... More
Supplying and applying ( MIXGUARD HR-5 or equivalent product of SIKA/ FOSROC/ BASF) cold applied elastomeric water proof membrane over the prepared surface, prepare a base surface stabilizing primer (MIXPRIME AC100 @ 2 : 1 : 3 (MIXPRIME AC100 : WATER : OPCEMENT) and apply directly (@ 1KG/SQM) along with MIXMAT GFM-50 at an overlapping of 50mm minimum After a curing period of 3-4 hours prepare and apply MIXPRIME AC @ over at a consumption of 250ML/SQM. After curing of 3-4 hours apply a coat of MIXGUARD HR – intermediate elastomeric water proof coat at consumption of 0.5KG/SQM. After a curing time of 4-5 hours apply MIXGUARD HRXtra - Micro fibre reinforced high tensile top coat at consumption of 0.5KG/SQM. Leave 72 hours time for complete system curing. Total build up DFT of the system will be 1700 microns.
1
937
937
... More
Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Up to 5mm depth and 5 mm width
1
102
102
... More
Supplying SBR latex manufactured by M/s FOSROC / BASF / SIKA
1
563
563
... More
Supply and apply Polyurethane roofing system having following specification and method of application 1. Moisture Triggered chemistry (MTC) (Sikalastic 601BC and Sikalastic 621TCManufactured by M/s Sika, BASF, Fosroc) based Aliphatic single component Polyurethane system Fully re-reinforced with randomly weaved glass fiber matting bound together by special emulsifier (Sika Reemat Premium or equivalent ).2. Roofing system should be completely seamless & zero flame application. 3. Dry film thickness should be 1.3mm with Tensile load of 5 N/mm2 & elongation is of 150%. 4. Polyurethane roofing system should be of high solid content approx 80% by weight. 5. The roofing system should be compatible with Bitumen.The rate inclusive of removing the existing membranes or any type of overlay over the existing weathering tile, preparing the surface thoroughly to receive the waterproofing coating etc., complete.
1
4484
4484
... More
Supplying and spraying single component Polyurethane (PU) water proofing coating (MC-HYPERDESMO / MARISEAL-250 or equivalent) which cures with the atmosphere humidity. The layer should produce a highly elastic membrane with strong adhesion to many types of surfaces. The product should be based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, to produce excellent mechanical, chemical, thermal, UV and natural element resistance properties. The product should be applied with airless spraying in two or more coats with minimum PU consumption of 1.5-1.8 kg/m2. The rate is inclusive of necessary surface preparation to receive the waterproofing coating.
1
1067
1067
... More
PVC membrane:-Supplying and fixing Sarnafil G 410 15L Felt or equivalent product of BASF/ FOSROC of 1.2mm thick or above, a multi-layer, synthetic roof waterproofing membrane based on premium-quality polyvinyl chloride (PVC) with an inlay of glass non-woven and a polyester fleece backing and has a lacquer coating applied to the top of the membrane to reduce staining from airborne dirt and pollutants. . Including complete installation using the loosely laid- mechanically fastened method as per manufacturer's method statement including overlapping, seam welding, detailing, fasteners, washers, welding chord etc. . The rate inclusive of terminating the vertical sides with suitable anchor fasteners, beadings and adhesive etc., to avoid pealing of the system and leakage. ( Product -Sarnafil S327-12L from SIKA or equivalent product from FOSROC and BASF with flowing specification of UV resistance Pass (500 h/ grade 0) as per EN 1297,impact strength450mm height (falling mass 0.5 kg) as per EN 12691; tensile strength1000 N/50mm weather resistant ; elongation at break10% as per EN m12311-2 SRI of 104 as per ASTME 1980-01)
1
1380
1380
... More
Supply and application of liquid PU Modified elastomeric membrane(Asphalt based only) (HLM 5000/ Elastiment 645/ Sikalastic or equivalent) to from minimum thickness of 1.25mm thickness, and the product conforming ASTM C836. The product should have minimum elongation of 600% and 100% recover @ 350% elongation second layer: fixing thermal insulation layer of 50mm extruded polystyrene slab (EXPS) having density of 32- 35 kg /cum and compressive strength 3kg/sqm laid over cured PU coating. A layer of geo textile of 200gsm is laid over the XPS layer. The rate inclusive of laying of screed concrete of 1:2:4 (1 cement: 2 sand: 4 10mm down graded stone aggregate) for an average thickness of 75mm mixed with integral water proofing compound over the geo textile layer in panels of 3mm x 3mm and sealing the jointing with PU sealant the top surface should be finish with pressed clay tiles of 18mm thick (Saint antoy or equivalent) laid over the cement mortar 1:3 admixed with integral water proofing compound. The rate inclusive of pointing the tiles joints with SBR modified mortar. (instead of screed layer + tiles, 50mm thick interlocking paver block can be laid over the XPS layer after laying a layer of 10cm sand bed)
1
3161
3161
... More
Providing and fixing 25mm tk x 100-150mm height polyethylene sheet / pad (hydrocell of FOSROC) used for expansion joint / vibration isolation as per the direction of Engineer in charge.
1
730
730
... More
Supplying and mixing FIBRIN XT (POLYPROPYLENE STABLE FIBRE) of approved L/D ratio and dia for road concrete. (Make reliance or equivalent make)
1
420
420
... More
Carpentry works
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
... More
Second class teak wood
1
139360
139360
... More
Paddak / Kongu wood
0.5
139360
69680
... More
Providing and fixing door bottom with Paddak / Kongu country wood frame of size 25x40mm for the door bottom repair work. The rate is including cutting and making the frame. Including removing the door and fixing it to door bottom properly & fixing the door in position.
5
411
2055
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd Class teak wood 50x12mm
5
185
925
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd Class teak wood 50x20mm
5
235
1175
... More
Providing and fixing teak wood corner decorative beading of various sizes up to 40x40mm for door frames / wall panelling etc complete as per the direction of Engineer in charge.
5
348
1740
... More
Providing and fixing of decorative Teak wood cornice work of size 35x25mm in skirting including all materials and labour charges etc. complete as per direction of Engineer in charge.
5
243
1215
... More
Providing and fixing of decorative Teak wood beading for wall panelling of size 20mm x 6mm including polishing etc. complete as per direction of Engineer in charge.
5
243
1215
... More
Providing and fixing the Sunmica / laminated sheet 1mm thick for cupboard shutter & cupboard work including cost of labour charges for fixing including providing teak wood beading of 19x6mm (if needed) all-round etc complete as directed.
5
718
3590
... More
(White board)-Providing and fixing with 1mm thick white laminated sheet over 12mm thick waterproof plywood backing with TW beading 11/2"x11/2" all round with melamine polishing including labour charges etc complete. (7’0” X 3’0”)
5
8426
42130
... More
Providing and fixing 4mm thick BWR waterproof plywood for plain lining with necessary screws & priming coat on exposed surface etc., complete. (Kitply / Century ply)
5
1264
6320
... More
Providing and fixing plywood 4mm thick , one side decorative veneer for plain lining / cladding including priming coat on unexposed surface, decorative veneer facings of approved manufacture.
2
1555
3110
... More
Providing and fixing 4 mm thick BWR plywood plain lining with necessary screws, priming coat on exposed surface, etc. complete with Teak ply facing of approved manufacturer (Kitply / Century ply)
2
1258
2516
... More
Providing and fixing of 4mm thick Veneer on table top surface and wall sides with Teak decorative beading all-round including Melamine polish etc complete.
2
3985
7970
... More
Providing and fixing 4mm thick OST/ ISI marked sheet on wooden partition, and doors as approved shade, including finical, screw, scaffolding work and melamine polishing with necessary sealant and fillers at all levels etc complete.
2
1321
2642
... More
Providing and fixing of water proof 6mm thick BWR Plywood ISI marked for window / wooden partition panelling wherever required and etc. complete as per the direction of Engineer in charge..
2
1726
3452
... More
Providing and fixing 12mm thick Water proof plywood for plain lining with necessary screws & priming coat on exposed surface etc., complete. (Kitply /Century ply)
2
2187
4374
... More
Providing and fixing 19mm thick BWR waterproof plywood for cupboard shutters door etc. with necessary 25mm x 4mm thick teak beadings, screws, nails etc as per the direction of Engineer in charge.(Kitply / Century ply)
5
2410
12050
... More
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I ) (like Novapan, Ecoboard etc.,) or graded wood particle board (like Bhutan board) IS:3087 marked to frame, backing or studding with screws,etc. Complete (Frames, backing or studding to be paid separately)
-
-
-
... More
9mm thick
3
1096
3288
... More
12mm thick
3
1332
3996
... More
18mm thick
3
1476
4428
... More
Providing and fixing pre-laminated flat pressed 3 layer (medium density) particle board (like Novapan, Ecoboard etc.,) or graded wood particle board (like Bhutan board) IS:3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade confirming to IS:12823 marked in shelves with screws and M.S or Aluminium brackets wherever required, edges to be painted with Polyurethane Primer (Brackets to be paid separately) -25 mm thick
3
1611
4833
... More
Providing and fixing of 1200 x 1200mm size perforated particle board with necessary nails including materials etc complete as per the directions of Engineer-in-charge.
3
1666
4998
... More
Providing and fixing of white colour writing board with 12mm thick waterproof BWR plywood (Kitply / Century ply) and over the surface white writing L lamination 1mm thick with all-round Aluminium L channels including necessary nails & screws and clamps etc. complete as per the direction of Engineer in charge.
5
3601
18005
... More
Removing the existing glass writing board and replacing the glass with new glass, repairing the wooden frame, backing material etc and fixing the same in the position wherever damaged portion repainting etc as per the direction of Engineer in charge.
1
3069
3069
... More
Renewing glass panes in wooden, steel and aluminum windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 10 Kg / Sqm (4.5 mm thick) - Area upto 0.5 Sqm.
20
443
8860
... More
Renewing glass panes in wooden, steel and aluminum windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 10 Kg / Sqm (4.5 mm thick) - Area 0.5 Sqm to 1.5 Sqm.
20
900
18000
... More
Renewing glass panes in wooden, steel and aluminum windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 13.75 Kg / Sqm (5.5 mm thick) - Area upto 0.5 Sqm.
20
391
7820
... More
Renewing glass panes in wooden, steel and aluminum windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 13.75 Kg / Sqm (5.5 mm thick) - Area 0.5 Sqm to 1.5 Sqm.
10
1000
10000
... More
Providing and fixing of glazing to door/ window/ ventilator shutter and partition etc with pvc neoprene gasket / wooden reapers / necessary adhesives etc complete as per the direction of engineer in charge (Saint Gobain / Modifloat).
-
-
-
... More
4mm thick float glass
5
1322
6610
... More
5mm thick float glass
5
1662
8310
... More
8mm thick float glass
3
2126
6378
... More
12 mm thick float glass
3
2828
8484
... More
Renewing glass panes and refixing existing wooden fillets
-
-
-
... More
Float glass panes weighing 10kg/Sqm 4mm thick
3
1183
3549
... More
Float glass panes weighing 13.75kg/Sqm 5 mm thick
3
1521
4563
... More
Extra for providing frosted glass panes 10 kgs /sqm (4mm thick) instead of ordinary glass panes 10 kgs / sqm (4mm thick) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
3
479
1437
... More
Supplying and fixing frosted edging sun control film for partition glasses
5
1043
5215
... More
Supplying and fixing sun control flim (Garware /Grey - 5/ 3M) for for windows / glass partition etc., including cleaning the glasses neatly after fixing the flim and edges to be cut properly
5
1043
5215
... More
Add extra charges for making design works / art work using laser cutting over the sun control/frosted film.
1
536
536
... More
Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc for fixing required door fittings all complete as per direction of Engineer in charge .
3
5799
17397
... More
Providing and fixing of 12mm thick Plain float glass for doors / table top with all-round edge polishing and design work as per approved design wherever necessary and etc. complete as per direction of Engineer-in-charge.
5
3652
18260
... More
Supplying and fixing of Tinted glass 5mm thick for glazed portion in Aluminum doors including removing the damaged with necessary fittings etc complete
3
3428
10284
... More
Providing and fixing 12mm glass door lock of POLO or equivalent make including necessary screws etc. complete
3
2434
7302
... More
Supplying and fixing CP towel rail of size 20mmx600mm long including fixing in position as directed (Metro/Parryware).
3
1206
3618
... More
Providing and fixing of CP Brass Towel Ring Metro make with CP Brass Screws and etc. complete as per direction of Engineer-in-charge
3
883
2649
... More
Supplying and Fixing vertical blinds of size 2"x1" Aluminium Powder coating channel acrylic runner, 100mm breadth quality matt cloth tilting metal rope, nylon cord, bottom metal plate, metal clamp screws and washable PARYTEX imported cloth etc., complete
3
653
1959
... More
Providing & Fixing premium quality Roller blinds with Serge Ferrari Soltis-96 or equivalent brand of AD Blinds. )Prestress Micro-Aerated Solar protection fabric of high tenacity Polyester Yarn with PVC Coating.
Roller Tube: Roller Tube shall be of extruded Aluminium alloy 38mm O.D (or as per system dimension) with a minimum wall thickness of 1.0mm duly anodised for long life.
Clutch: Clutch shall be wrap spring design with high strength fibreglass reinforced polyster assembly and high carbon steel springs to transmit motion from driving to driven members of clutch mechanism.Idler: Idler shall be of high strength fibreglass reinforced polyster, consisting of an outside sleeve and centre shaft. Installation Brackets: Brackets shall be of tomised steel powdercoated to give superior finish. Bracket shall accommodate overhead, side or face mounting with clutch assembly on either end of the roller. Bottom Rail: Bottom of the blind shall be provided with aluminium tube powder coated in a colour matching to the fabric. Fabric: Composition: 40% Polyester / 60% PVC, Weight:400 g/m2 (+/-5%), Thickness:0.45 mm (+/-5%), Fabric Openess Factor: 4% , Tensile Strength (Warp/Weft): 220/220 daN / 5cm, Tearing Strength (Warp/Weft): 30/25 daN, Fire Retardancy:M2 (NFP92-507)
3
1497
4491
... More
Providing and fixing wall panelling using 1mm laminate sheet / veneer sheet (Greenlam / Sunmica) over 12mm thick BWR plywood (Kitply / century ply)and with, necessary teak reaper including necessary CP screws, adhesives (finical) & priming coat on exposed surface etc complete as per the direction of Engineer in charge.
3
4155
12465
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked Stainless steel butt hinges with necessary screws excluding panelling which will be paid for separately- Second class teak wood
-
-
-
... More
35mm thick
3
3922
11766
... More
30mm thick
3
3530
10590
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked Stainless steel butt hinges with necessary screws excluding panelling which will be paid for separately- Padak wood - 30 mm tk Shutters
3
3468
10404
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick
-
-
-
... More
Second class teak wood
10
3036
30360
... More
Padak wood
10
3094
30940
... More
Providing and fixing rear wall acoustic insulation make a grid of size 2'x2' using 50x40mm ven teak wood reaper and fix the same on the wall. And cut 24kg/cum density, 50mm thick fiberglass resin bonded wool and fix the same into all the gaps between wooden reapers and above covering insulation with semi-perforated hard board and Novapan board at required height including putty and etc. complete.
3
2624
7872
... More
Providing and fixing wall panelling of 2"x1 1/2" country wood frame @ 600mm c/c in both directions and covered 8mm thick waterproof BWR plywood (Kitply / Century ply) for panelling including primer for plywood and wooden frame etc complete as per the directions of Engineer in charge.
3
2881
8643
... More
Providing and fixing wall paneling 6mm thick waterproof ply over 4mm thick URO veneer ply wood of approved ISI equivalent make including frame 2"x1 1/2" country wood frame for opening portion including 150mm high skirting with 12mmwater proof ply wood Kitply and URO deodar wood design beading for skirting edges and finished by melamine spray polishing of matt finish with necessary Fevicol screws hardware items spray by finished etc complete (Greenlam / Sunmica)
3
8599
25797
... More
Providing and fixing box type cupboard (standalone or wall mounting) of 400 mm to 600 (depth of the cupboard) thick with glazed or plywood openable made of 19mm thick BWR plywood (Kitply / Century ply) and laminated with 1mm thick lamination sheet (Greenlam / Sunmica) for all exposed surfaces and using 6mm thick float glass for glazed shutter (Saint Gobain / Modifloat), 12mm BWR plywood for openable shutter with laminate plywood and inner surfaces finished with two coats of enamel paint (Measurement for cupboard Length x Height). Rate inclusive of necessary fixtures for wall mounting, SS fixtures of M/s Ozone make for handle, hinges, tower bolt, magnetic catcher, cabinet / frog hinges of H'a'fele or Ozone make etc., complete.
3
12026
36078
... More
Providing and fixing cupboard with sliding shutter with all-round frame using country wood (Paddak / Kongu) of size 70 x 30 mm, and 12mm thick water proof BWR ply wood ISI marked ( kit ply / Century) finished with 1mm thick laminated sheet of approved make and shades as directed by engineer in charge. The rate includes all fittings like aluminum two track sliding arrangement, SS fixtures of M/s Ozone make for handle, hinges, sliding wheel as approved by the engineer in charge and labour charge etc., (Depth of the cupboard 0.45 to 0.6m and measurement will be taken for payment based on the front area (length of cupboard x height of the cupboard)
3
11588
34764
... More
Providing and fixing sliding type cupboard shutters/ openable shutter with all-round frame of size 65x30mm thick Paddak / Kongu wood frame, two track aluminium sliding rail, finished with 5.5mm thick plain glass / 6mm laminated plywood of approved make SAINT GOBIN or MODIFLOAT the rate includes labour charge, fixtures like SS handle, lock, sliding wheel and necessary fittings for sliding shutter, cabinet hinges and magnetic catcher for opeenable shutter of Ozone make etc.,(including polishing the wooden frame ) as per the direction of the engineer in charge.
3
8532
25596
... More
Providing and fixing 85 x 42 mm chromium plated brass pull bolt lock with necessary screws, nuts, bolts and washers etc. complete
3
251
753
... More
Providing and fixing ISI marked 85 mm x 42 mm oxidised M.S. pull bolt lock confirming to IS :7534 with necessary screws, bolts, nuts and washers etc complete :
3
98
294
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete.
3
2882
8646
... More
Providing and fixing 4 lever mortice lock godrej / link including repair to the door etc., complete
2
934
1868
... More
Providing and fixing special quality chromium plated brass cupboard locks with 6 levers including necessary screws etc. complete (best make of approved quality) of : (Godrej / Link)
-
-
-
... More
Size 40 mm
5
247
1235
... More
Size 50 mm
3
261
783
... More
Size 65 mm
3
294
882
... More
Providing and fixing special quality bright finished brass cupboard or wardrobe locks with 4 levers including necessary screws etc. complete (Godrej / Link)
-
-
-
... More
40mm
3
241
723
... More
50mm
3
280
840
... More
Providing and fixing of Brass Cylindrical Lock of Godrej make with necessary screws and bolts etc. complete.
2
1908
3816
... More
Providing and fixing Dorma make heavy duty Lock ( Model number 278) for entrance Main door as per the direction of Engineer in charge.
2
6199
12398
... More
Providing and fixing brass bright finished fancy aldrop for main door 200mm long. The rates include labour charges etc complete.
2
2107
4214
... More
Providing and Fixing Aluminum sliding door bolts ISI marked anodised (anodic coating not less than Grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete: 250x16mm. (JAL / CLASSIC / CROWN)
3
312
936
... More
Providing and fixing Stainless steel sliding door bolts ISI marked transparent or dyed to required colour or shade with nuts and screws etc complete
-
-
-
... More
250 x 16 mm
5
240
1200
... More
300x16mm
5
267
1335
... More
Providing and fixing ISI marked oxidised M.S.door latches confirming to IS : 5930 with necessary screws etc complete :
-
-
-
... More
300x20x6mm
3
363
1089
... More
250x20x6mm
3
293
879
... More
Providing and fixing bright finished brass door latch with necessary screws complete
-
-
-
... More
250x16x5mm
5
261
1305
... More
300x16x5mm
5
275
1375
... More
Providing and fixing aluminum tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal)
-
-
-
... More
100x10mm
5
79
395
... More
150 x 10 mm
5
79
395
... More
200 x 10 mm
5
149
745
... More
250x10mm
5
173
865
... More
300x10mm
3
194
582
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws complete : 100 x 10 mm
2
147
294
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish (barrel type) with necessary screws etc complete :
-
-
-
... More
100x10mm
1
39
39
... More
150x10mm
1
54
54
... More
200x10mm
1
63
63
... More
250x10mm
1
78
78
... More
Providing and fixing bright finished brass tower bolts with necessary screws etc. complete
-
-
-
... More
250x10mm
5
580
2900
... More
150x10mm
5
433
2165
... More
Providing and Fixing Aluminum Handles ISI marked anodised (anodic coating not less than Grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete: 150mm. (JAL / CLASSIC / CROWN)
5
147
735
... More
Providing and fixing ISI marked oxidised M.S. handles confirming to IS : 4992 with necessary screws etc complete :
-
-
-
... More
75mm
2
24
48
... More
100mm
2
28
56
... More
125mm
2
35
70
... More
Providing and fixing 20mm dia 300mm long Stainless Steel tubular handle of DORMA make with necessary flange, bolt nut and etc complete.
5
209
1045
... More
Providing and fixing Dorma make (Model number XLC -34H ) 30x 600mm long heavy duty tubular handles for entrance Main door as per the direction of Engineer in charge.
5
6628
33140
... More
Providing and fixing bright finished brass handles with screws etc. complete: (Godrej / Link)
-
-
-
... More
75mm
5
151
755
... More
100 mm
5
192
960
... More
125mm
5
235
1175
... More
Providing and fixing bright finished brass furniture handles (Godrej / Link)
5
275
1375
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete
-
-
-
... More
75mm
3
192
576
... More
100 mm
3
220
660
... More
125 mm
3
255
765
... More
Providing and fixing aluminum handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal)
-
-
-
... More
75 mm
6
48
288
... More
100 mm
4
56
224
... More
125 mm
5
56
280
... More
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc complete :
-
-
-
... More
200mm weighing not less than 120grams
6
30
180
... More
250mm weighing not less than 150grams
4
34
136
... More
300mm weighing not less than 200grams
5
39
195
... More
Providing and fixing aluminum casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete upto 300mm long.
5
62
310
... More
Providing and fixing bright finished brass hard drawn hooks and eyes
-
-
-
... More
100mm
5
61
305
... More
150mm
5
68
340
... More
200mm
5
88
440
... More
250mm
5
94
470
... More
300mm
5
96
480
... More
Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete
-
-
-
... More
75x65x4mm(ordinary type)
5
147
735
... More
125x70x4mm(ordinary type)
5
160
800
... More
100x70x4mm(ordinary type)
5
193
965
... More
Providing and fixing bright finished Brass Hinges 150 mm with Brass screws etc. complete as per the direction of Engineer in charge.(Godrej)
5
317
1585
... More
Providing and fixing ISI marked oxidised M.S.pressed parliamentary hinges with necessary screws etc complete
-
-
-
... More
75x100x20x2.24mm
5
53
265
... More
100x125x22x2.80mm
5
61
305
... More
125x125x22x2.80mm
5
70
350
... More
Providing M.S. piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc complete :
-
-
-
... More
Overall width 35mm:
3
249
747
... More
overall width 50mm
3
245
735
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc complete : (Classic, Crown, Jal)
-
-
-
... More
75 x 47 x 1.70 mm
2
30
60
... More
100 x 58 x 1.90 mm
2
36
72
... More
125 x 65 x 2.12 mm
2
46
92
... More
Providing and fixing ISI : 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete (Godrej)
-
-
-
... More
100 x 58 x 1.90 mm
2
73
146
... More
125 x 64 x 1.90 mm
2
81
162
... More
Providing and Fixing Stainless steel butt hinges with stainless steel screws etc., complete as per IS:12817 : 150x65x1.90mm.
2
147
294
... More
Providing and fixing SS Auto hinges / friction stay auto hinges 100mm size with necessary screws etc complete as per the direction of Engineer in charge.
5
292
1460
... More
Providing and fixing aluminum butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal)
-
-
-
... More
75x63x4mm
5
106
530
... More
100x63x3.2mm
5
121
605
... More
100x63x4mm
5
122
610
... More
100x75x4mm
5
124
620
... More
125x63x4mm
5
138
690
... More
125x75x4mm
5
147
735
... More
Providing and fixing IS 3564 marked Aluminum die cast body tubular type universal hydraulic door closer hardwyn make (classic queen) or equivalent with necessary accessories and screws etc complete ( including removing charges)
5
1580
7900
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cussion, screws etc. to suit shutter thickness complete (Godrej / Link) ( including removing charges)
5
255
1275
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete (including removing charges)
5
104
520
... More
Providing and fixing aluminum hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete( including removing charges)
-
-
-
... More
Single rubber stopper
10
34
340
... More
Twin rubber stopper
10
46
460
... More
Providing and fixing Aluminium flush door stopper of anodic coating of grade Ac 10 as per IS 1868 - transparent or dyed to require colour at shade with neat screws etc 3-1/2" size 80mm of good quality material as directed including removing the existing damaged floor stopper.
20
100
2000
... More
Providing and fixing DORMA floor spring BTS80 (heavy duty) with special accessories for aluminum or glazed door etc.,
2
17218
34436
... More
Providing and fixing DORMA floor spring BTS 75V with special accessories for aluminum or glazed door etc.,
2
11779
23558
... More
Providing and fixing of Hydraulic floor Spring for doors with approved make and etc. complete including cutting neatly finishing of floors (Hardwyn / Everite)
2
4442
8884
... More
Providing and fixing of approved make Pivot set for aluminum doors and necessary screws etc complete as per direction of Engineer in charge.
2
923
1846
... More
Providing and fixing special quality chromium plated magnetic catcher of size 40mm for cupboard shutters including necessary screws and etc complete.
20
70
1400
... More
Providing and fixing Sliding wheel for Aluminium sliding door etc complete as per the direction of Engineer in charge.
2
202
404
... More
Providing and fixing of 2" dia heavy type Rolling wheel for movable partition with brass screws and etc complete as per the direction of Engineer in charge.
5
953
4765
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets
-
-
-
... More
20 mm dia ( Heavy Type )
5
145
725
... More
25 mm dia. ( Heavy Type )
5
154
770
... More
Providing and fixing of Brass coated Curtain Rings with Brass Hooks and removing & relaying curtain cloth etc. complete
5
2888
14440
... More
Providing and fixing curtain pipe of 25mm dia Stainless steel pipes including Brass decorative bracket sets at each end including necessary screws etc complete as per the direction of Engineer in charge.
20
469
9380
... More
Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of First class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30mm thick including ISI marked Stainless steel butt hinges with necessary screws.(Shakthi / Kutty / Western India)
-
-
-
... More
Decorative type
10
2956
29560
... More
Non decorative type
20
1982
39640
... More
Providing and fixing 30mm PVC door shutters consisting of frame made out of MS tube of 19 gauge thickness and size of 25x25mm for all around MS frame shall have a coat of steel primer. The inner panel shall consist of insulation of 25mm thick PU foam (PUF) with 2mm thick termite proof water proof and fire resistant moulded PVC rigid foam sheet in different plane, moulded and prelam colour on the one or both faces. The panel to be sealed with lipping of 10mm white PVC sheet bottom, made by sticking to PVC rigid foam sheet of 5mm thickness using PVC solvet cement, on the top and bottom side and vertical sides were hinge are fitted and 60mm wide PVC sheet bottom (made by sticking 5 PVC rigid sheet 5mm thickness of 50mm width and 2 PVC sheet of 5mm thickness and 25mm width) on the sides opposite to where hinges are fitted etc. completed as per manufactures drawing and specification (Manufactured by M/s Rajshri or equivalent)
5
3618
18090
... More
Extra for providing lipping with second class teak wood battens 25mm minimum depth on all edges of shutters ( Overall area of door shutter to be measured)
20
438
8760
... More
Extra for providing vision panel not exceeding 0.1 sqm in all types of flush doors (Cost of Glass excluded). (Overall Area of door shutter to be measured) rectangular or square
10
195
1950
... More
Providing and fixing Aluminium Sheet 1mm thick for Toilet flush door with necessary screws, nails and etc. complete
3
827
2481
... More
Supplying and fixing PVC foam (Rajshree) sheet for bath room doors with necessary base adhesive and etc. complete as per direction of Engineer-in-charge.
5
1008
5040
... More
Providing and fixing of PVC moulded Box type Mirror with screws and etc. complete 19"x12" or equivalent size.
20
1616
32320
... More
Providing and fixing of 8mm thick Modi float/ Saint Gobain make Mirror with bevelled edges/ edge moulded and fixing the same on wall with SS stud of required number etc.,
5
7107
35535
... More
Providing and fixing mirror of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453 x 357 mm
5
1004
5020
... More
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete (Saint Gobain / Modifloat)
5
1108
5540
... More
Providing and fixing Kohler Forefront Rectangular Light Mirror for Bathroom 600mm X 650mm (24" x 26") LED Mirror for Wash Basin (of approved quality) complete fixed to wooden cleats with CP brass screws and washers complete
1
36842
36842
... More
Providing and fixing of wooden partition in full height by using of first quality Paddak / Kongu wood in sizes of 1 3/4" x 2 1/4" frame work @2ft grid in horizontal and vertical direction and two sides covered by 12mm ply thick water proof BWR ply ISI marked (Kitply / Century ply) with 4mm thick veneer / OST fixing melamine polishing etc complete. The rate includes cost of material, labour, hardware and all miscellaneous expenditure etc
2
8931
17862
... More
Providing and fixing full height wooden partition with country wood frame (first quality Paddak / Kongu) work 3"x2" & 3"x1 1/2" @ 600mmc/c in two directions having 6mm BWR plywood of approved make (Kitply / Century ply) on both sides finished with 1mm mica with necessary finical, Screws and etc complete as per the directions of Engineer in charge.
2
7294
14588
... More
Providing and fixing low/semi height wooden partition with country (first class Paddak / Kongu) wood frame work of size 3"x2" and 600mm c/c in two directions having 6mm thick ISI plywood of approved make on both sides including 1mm thick lamination sheet (Greenlam / Sunmica) finishing and top finish with 4"x3/4" teak wood cornice reaper with necessary finical,
2
5565
11130
... More
Supplying and fixing of absorptive type Acoustical tiles of size 600mm x 1200mm x 12mm thick (Density 600 Kg/cm) as approved by Architect/ Engineer -in charge, fixed over G.I framework of 48mm x 25mm x 0.8mm ‘C’ studs @ 600mm x 600mm C/C spacing complete. The gap between the tile and wall surface shall be filled with 25mm thick SoundSynth AW wool which are friction fitted and adhered using Sound Stick S7. The tiles are then fixed to Aluminium frame using seam fasteners etc. Complete as directed by Engineer in charge. The NRC Value of the Wall panel
2
2607
5214
... More
Providing and fixing Wall Paneling with 48mm x 25mm x 0.8mm ‘C’ G.I studs or equivalent aluminium section of size 65x25x2mm, vertical member placed 610mm interval and horizontal supports at 1200 mm levels with 10mm thick BISON PANEL (Cement Bonded Particle Board confirming to IS : 14276) / calcium silicate board ) and 1.00mm thick mica or interior emulsion paint of approved colour etc.complete maintaing 25mm air gap between the wall and panel filled with polywool..
2
2087
4174
... More
Supplying and fixing of bison panel boards (cement board / calcium silicate board) of 10mm thick panel of size 8' x4' as approved by Architect/ Engineer -in charge, fixed over G.I framework of 48mm x 35mm x 0.8mm or 75mmx 35x 0.8mm lip‘C’ studs @ 610mm Vertical x 1200mm Horizontal spacing or equivalent aluminum sections 64x38x 2mm. The gap between the boards shall be filled with 50mm thick poly wool. The tiles are to fixed to Aluminum frame using seam fasteners etc. The surface should be finished with 1mm thick mica of appropriate shade or acrylic interior paint using necessary adhesive, nails etc complete as directed by Engineer in charge. (deduction towards opening will be made for the measurement)
2
3526
7052
... More
Cement bonded particle baord / Calcium silicate board partition of thickness 100mm thick Supplying and fixing of bison panel boards of 10mm thick panel of size 8' x4' as approved by Architect/ Engineer -in charge, fixed over G.I stud framework of required size or frame with aluminum sections 100x40 x2mm sections’ studs @ 610mm Vertical x 1200mm Horizontal spacing . The gap between the boards shall be filled with 100mm thick SoundSynth AW wool. The tiles are to be fixed to Aluminium frame using seam fasteners etc. The surface should be finished with 1mm thick mica of appropriate shade or acrylic interior paint by using necessary adhesive, nails etc complete as directed by Engineer in charge. (deduction towards opening will be made for the measurement)
2
5635
11270
... More
Providing and fixing 10/12mm thick cement board / Calcium silicate ( bison board or equivalent) over the existing alumium/ wooden frame of the existing partitions / laboratory sink fixing / table top or side.
2
1370
2740
... More
Providing and fixing 50mm thick polywool with 24 KG / cum resin bonded wool for partition
2
481
962
... More
Supply and fixing modular water proof partition with door for toilets, the rate inclusive of fittings with stainless fittings such as lock, corner beadings, supporting selections, hinges, handles etc complete.- Intermediate panel, plaster & door. The intermediate panel is one continued panel without any joints. All intermediate panels, plaster and doors shall be 12mm thick with edges chamfered. The solid compact laminate. ( Phenol Core Board) is based on thermosetting resins, homogeneously reinforced with cellulose fibers. Top surface on both sides is melamine coated which is scratch and impact resistant. Hardware and fixing. All pilaster are to be supported by adjustable foot and non corrosive inserts. Top rail and wall fixing with and exterior polyamide coating guarantees resistance to breakage , heat humidity and chemicals. the base of the adjustable foot will be anchored to the floor with a clearance height of 100mm. Aluminium U-channel will be used for the fixing of intermediate panels to the wall. Each toilet compartment shall be equipped with the following accessories in stainless steel Accessories stainless steel - privacy thumb turn u channel ss coated ss door knob,ss coat Hook Auto Return Hinges, ss coated Aluminium Top profile, ss Adjustable legs, ss door stopper lining color of the accessories will be natural ss.
1
8333
8333
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both havingwall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
10
7031
70310
... More
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
1
9422
9422
... More
Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).
1
7273
7273
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
1
9039
9039
... More
Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)
1
8583
8583
... More
Supplying and fixing name board for various building indicating department name (bilingual - English and Hindi) made out of Aludecor 3mm Aluminum Composite Panel with necessary MS frame ( box section 1"size, thickness of board 5"). The letters should be carved using CNC Router cutting over the ACP panel and carved portion should be sealed with 2mm 040 Imported Acrylic sheet. Board should be installed on wall using Ms square pipe frame and with necessary achour fasteners. The rate inclusive of providing internal lighting with Philips tube light fixtures (lighting provided should not be less than 10 watts / sq.ft). ( for reference sample installed in front of HSB (north entrance) and specification, colour should be matched ). The board should be water proof and confirm to IP65 standards. All the joints should be sealed properly to avoid water ingression. The scope of work include getting approval for the draft board with bilingual, providing scaffolding for installing the board, Disposing the old board etc complete.
1
14445
14445
... More
Plumbing Works
-
-
-
... More
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes / SWR pipe conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (Finolex/Prince/Supreme).
-
-
-
... More
Single socketed pipe 75mm diameter
20
347
6940
... More
Single socketed pipe 110mm diameter
20
499
9980
... More
160 mm diameter pipe
20
869
17380
... More
Providing, laying and joint welding of HDPE pipes of 110mm dia heavy duty in the duct and connecting same to the existing 75mm or any other dia branch line from fume hood sink and other laboratory sink including welding , erection after exposing the existing pipe line in the trench with necessary tools and tackles etc. complete as per the directions of Engineer-in-charge. (Finolex / Astral)
5
2307
11535
... More
Providing and fixing of HDPE 110mm dia Tee with reducer / Bend / Flange with collar by fixing with welding to the joints including modification of existing 75mm line etc. complete as per the direction of Engineer in charge. (Finolex / Astral)
5
2198
10990
... More
Providing, laying and joint welding of HDPE pipes 75mm dia heavy with necessary tools and tackles etc. complete as per the directions of Engineer-in-charge. (Finolex / Astral)
5
920
4600
... More
Providing and fixing of HDPE 75mm dia Tee / Bend / Flange with collar with fixing through welding the joints and etc. complete as per the direction of Engineer in charge. (Finolex / Astral)
5
1008
5040
... More
Providing and fixing of 32mm dia PVC pipe 5 kg/cm2 with necessary couplings, solution and special clamps as per approved ISI make etc complete for AC outlet. The rate inclusive of labours, fittings, clamps, scaffolding and etc complete at all levels.
5
344
1720
... More
Providing and laying of 300mm dia heavy duty RCC Hume pipe NP3 grade as per Indian standards with collar joints and stilt mixture CM 1:2 etc. complete
5
1021
5105
... More
PVC pipe- replacing the defective / broken fittings with wall face unplasticised -Rigid PVC rain water pipe fittings. 75mm bend with door / shoe/ cowl.
5
270
1350
... More
PVC pipe replacing the defective / broken fittings with wall face unplasticised -Rigid PVC rain water pipe fittings. 110mm bend with door.
5
451
2255
... More
Providing and fixing on wall faced unplasticised - PVC moulded fitting / accessories for unplasticised - Rigid PVC rain water pipe
-
-
-
... More
Coupler
-
-
-
... More
75mm
10
105
1050
... More
110mm
10
178
1780
... More
Single Tee with door
-
-
-
... More
75 x 75 x 75 mm
10
186
1860
... More
110 x 110 x 110 mm
10
318
3180
... More
160x160x160mm
10
927
9270
... More
Single Tee without door
-
-
-
... More
75 x 75 x 75 mm
10
162
1620
... More
110 x 110 x 110 mm
10
273
2730
... More
Bend 87.5 degree
-
-
-
... More
75mm bend
10
110
1100
... More
110mm bend
10
192
1920
... More
160 mm dia
2
508
1016
... More
Shoe (Plain)
-
-
-
... More
75mm shoe
10
96
960
... More
110mm shoe
10
164
1640
... More
160 mm shoe
2
480
960
... More
Providing and fixing unplasticised PVC pipe, clips of approved design to unplasticised - PVC rain water pipe by means of 50 x 50 x 50 mm hard wood plugs.
-
-
-
... More
75mm
10
264
2640
... More
110mm
10
270
2700
... More
160 mm
3
306
918
... More
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc. (Internal work) Exposed on wall.
-
-
-
... More
15 mm dia nominal bore
10
444
4440
... More
20 mm dia nominal bore
10
516
5160
... More
25 mm dia nominal bore
5
696
3480
... More
32 mm dia nominal bore
5
683
3415
... More
40 mm dia nominal bore
5
818
4090
... More
50 mm dia nominal bore
5
972
4860
... More
Providing and fixing GI pipes complete with GI fittings and clamps including trenching and refilling etc. External work.
-
-
-
... More
15 mm dia nominal bore
5
392
1960
... More
20 mm dia nominal bore
5
439
2195
... More
25 mm dia nominal bore
10
543
5430
... More
32 mm dia nominal bore
10
569
5690
... More
40 mm dia nominal bore
10
636
6360
... More
50 mm dia nominal bore
10
724
7240
... More
Providing and fixing Concealed pipe complete with GI fittings and clamps including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall
-
-
-
... More
15mm dia nominal bore
10
624
6240
... More
20 mm dia nominal bore
10
696
6960
... More
Providing and laying of 80mm dia 'B' class medium GI Pipe Tata / Apollo or approved make with necessary GI ISI fittings etc. complete as per specification
5
1165
5825
... More
Providing and fixing GI union in GI pipes including cutting and threading the pipe and making long screws etc., complete. (‘R’ brand / Unique)
-
-
-
... More
15mm nominal bore
10
227
2270
... More
20mm nominal bore
10
250
2500
... More
25mm nominal bore
10
271
2710
... More
32 mm dia nominal bore
10
317
3170
... More
40 mm dia nominal bore
10
345
3450
... More
50 mm dia nominal bore
10
498
4980
... More
Providing and fixing G.I Union in existing G.I pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. (‘R’ brand / Unique)
-
-
-
... More
15 mm dia nominal bore
10
578
5780
... More
20 mm dia nominal bore
10
599
5990
... More
25 mm dia nominal bore
10
619
6190
... More
Making connection of GI distribution branch with GI Main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
-
-
-
... More
25 to 40 mm nominal bore
10
604
6040
... More
50mm to 80mm nominal bore
10
978
9780
... More
Providing and fixing of PVC pipe of SWR grade - 160mm / 6 kgcm2 with necessary couplings, solution and special clamp as per approved make Prince / Finolex or Equivalent ISI Make etc. complete
5
1781
8905
... More
Removing the existing 110mm dia PVC - SWR grade pipe line and refixing the same for rain water pipe including necessary cutting and fixing etc complete as per the direction of engineer in charge.(Supreme / Prince / Finolex )
5
185
925
... More
Providing and fixing of UPVC pipe 40mm dia / 6kg with necessary couplings, solution and special clamp as per approved make Prince / Finolex or Equivalent ISI Make etc. complete.
5
730
3650
... More
Providing and fixing of CPVC pipe with necessary couplings, solution and special clamp as per approved make Supreme / Ashirvad or Equivalent ISI Make etc. complete.
-
-
-
... More
15 mm dia nominal bore
10
232
2320
... More
20 mm dia nominal bore
10
338
3380
... More
25 mm dia nominal bore
10
368
3680
... More
32 mm dia nominal bore
5
514
2570
... More
40 mm dia nominal bore
5
690
3450
... More
50 mm dia nominal bore
5
1001
5005
... More
Providing, laying and joint welding of CPVC pipes 75mm dia (class 6kg/ Sqm) heavy duty with necessary fittings like reducer, bend, T-joints etc complete as per the directions of Engineer-in-charge. (Finolex / Astral) . The clamps to be fixed in the regular interval as required in the site condition. The rate inclusive of required labour, tools and tackles etc . complete.
5
1327
6635
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 15mm nominal bore. (Finolex / Astral)
10
271
2710
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 20mm nominal bore. (Finolex / Astral)
10
324
3240
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 25mm nominal bore. (Finolex / Astral)
10
371
3710
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 32mm nominal bore. (Finolex / Astral)
10
449
4490
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 40 mm nominal bore. (Finolex / Astral)
10
446
4460
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 50mm nominal bore. (Finolex / Astral)
10
790
7900
... More
Providing and fixing CPVC union in CPVC pipes including cuttings and threading the pipe and making long screws etc, complete (New work) - 75mm nominal bore. (Finolex / Astral)
10
911
9110
... More
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (Finolex/Prince/Supreme).
-
-
-
... More
40mm diameter
5
359
1795
... More
50mm diameter
5
359
1795
... More
Providing, Laying and jointing glazed stone ware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand / M sand) including testing of joints etc. complete
-
-
-
... More
100mm dia
5
292
1460
... More
150mm dia
5
436
2180
... More
Providing, Laying cement concrete 1:5:10 (1 cement: 5 coarse sand / M sand : 10 graded stone aggregate 40mm nominal size) all-round Stoneware pipes including bed concrete as per standard design:
-
-
-
... More
100mm dia SW pipe
5
971
4858.8
... More
150mm dia SW pipe
5
1188
5940
... More
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete
-
-
-
... More
Semi rigid pipe
-
-
-
... More
32 mm dia
5
98
490
... More
40 mm dia
5
105
525
... More
Flexible pipe
-
-
-
... More
32 mm dia
5
95
475
... More
40 mm dia
5
100
500
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 gms each.
5
51
255
... More
Providing and fixing 100 mm sand cast iron grating for gully, floor or nahani trap
5
222
1110
... More
Providing and fixing of 100mm dia C.P. grating with white cement packing all-round, the grating for floor sump and etc. complete. (Parryware / Metro)
5
165
825
... More
Providing and fixing PTMT grating of approved quality and colour: Circular type - 100mm dia.
5
123
615
... More
Providing and fixing PTMT (An Engineering thermoplastic) grating of approved quality, colour and make (Prayag or equivalent)
-
-
-
... More
100mm nominal dia 12mm high, domed shape conforming to IS standards and weighing not less than 25 gms Circular type
5
53
265
... More
150mm nominal size square, 18mm high with 100mm dia. Of the inner hinged round grating domed shape conforming to IS standards, weighing not less than 100gms. Rectangular type with openable lid
5
128
640
... More
Providing and fixing PVC heavy duty nahini trap of dia 150mm
5
629
3145
... More
Replacing the damaged floor trap with PVC Multi floor trap of approved make and up to 150mm dia after necessary cutting the floor. Repairing the same etc complete including cost of all material complete. (The floors shall be restored to original finish).
5
678
3390
... More
Providing and fixing unplasticised PVC connection pipe brass unions (Kohinoor) 45 cm length 15mm nominal bore
5
86
430
... More
Replacing damaged cudappa sink 20mm thickness - bowl of size 600x600x300mm and with necessary fittings , necessary waste / waste pipe, Brackets etc complete.
1
2529
2529
... More
Providing and fixing Salem stainless steel sink with drain board (Diamond make REK4020 medium bowl of size 40" x 20" and 1mm thick with necessary fittings etc complete.
1
9402
9402
... More
Providing and fixing Salem stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983(without drain board) with CI brackets and stainless steel plug 40mm including painting the fittings cutting and making good the walls wherever required 610x510mm bowl depth 200mm. (Diamond / Butterfly)
1
7888
7888
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm
1
3118
3118
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
1
7886
7886
... More
Providing and fixing wash basin with CI / MS brackets, 15mm CP brass pillar taps, Kingston / Gem / Techno / Parko, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls and floors where ever necessary. (Hindware / Parryware/ Somany) White Vitreous China Flat back wash basin size 550 x 400 or 500x400mm with a single 15mm CP brass pillar taps
1
3221
3221
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 450x300mm.
1
1929
1929
... More
Providing and fixing wash basin (counter top or counter bottom) (Somany -Oval type 460x342x155mm square type 515x380x120mm / circular 445x445x 195) with making good the walls etc complete. White Vitreous china wash basin 550mm excluding cost of fittings. ((Parryware / Hindware/ Somany)
1
2499
2499
... More
Providing and fixing wash basin (counter top or counter bottom) (Kohler- 483mm X 334mm square type with making good the walls etc complete. White Vitreous china wash basin excluding cost of fittings.
1
6509
6509
... More
Providing and fixing white vitreous china pedestal type (European type / Wash down type) water closet pan including necessary trap. (Hindware / Parryware)
1
5125
5125
... More
Supplying and fixing wall mounting closet of white colour ceramic with all fittings including necessary trap. (Parryware / Somany -model DUMONT size 360x490x335).
1
5426
5426
... More
Supplying and fixing wall mounting closet of white colour ceramic with all fittings including necessary trap. (Kohler or equivelent size 540x325x360mm). K-20217IN-S-0 with P-Trap
1
22120
22120
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC Pan of size 580 x 440 mm. (Hindware / Parryware/ Somany) including necessary trap.
1
3459
3459
... More
Providing and fixing low level flushing cistern PVC with manually controlled device (handle lever) confirming to IS : 7231, Parryware / Hindware / Seabird / Orient (Coral) with all fittings and fixtures complete 10 lt. capacity - white
1
1789
1789
... More
Supplying and fixing wall mounting concelaed flush tank (Glade of Somany) and wall mount flush valve model Round 440x80x440 mm of Somany 240x160mm flush tank (ceramic) parryware or equivalent with all fittings simon set. (Parryware / Hindware/ Somany)
1
8036
8036
... More
Supplying and fixing wall mounting concelaed flush tank (Kohler make- P77027IN-P-NA Pneumatic Tank 3/6L )
1
7770
7770
... More
Supplying and fixing Face Plate For Inwall Tank (Kohler make- 4177IN-M-CP )
1
2241
2241
... More
Providing and fixing solid plastic seat with lid for pedestal type EWC Pan Parryware / Hindware / Seabird / Orient (Coral) complete White solid plastic seat with lid
1
844
844
... More
Providing and fixing KOHLER (20219IN-UF-0 ) TRACE (Square) toilet Slim Seat Cover (White) for pedestal type wall mount EWC Pan complete
1
5080
5080
... More
Supplying and fixing of Porcelain Ceramic 120mm thick Urinal Partition size 820 x 380 with SS Clamp etc. complete (Hindware / Parryware)
1
2625
2625
... More
Providing and fixing of Porcelain Urinal channel of approved brand and make with base mortar 1:3 (1 cement 3 sand / M sand) and pointing with white cement etc., complete (Parryware/Hindware).
1
1567
1567
... More
Providing and fixing White vitreous china flat back half stall urinal of 580x380x350mm with white , Parryware / Hindware / Somany model Smart/ Seabird / Orient(Coral) with fittings, standard size CP brass flush pipe, spreaders with unions and clamps
1
8480
8480
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality colour and make (Prayag or equivalent) 600 mm long towel rail with total length of 645 mm, 78mm wide and effective height of 88mm, weighing not less than 190gms.
1
627
627
... More
Supplying and fixing CP Kohler Complementary Towel Hanger (5630IN-CP) for Bathroom including fixing in position as directed (Metro/Parryware).
1
2155
2155
... More
Replacing the faulty shower arm (Kohler 16356IN-A-CP) with new fittings. Charges including all material, labour etc complete.
1
1803
1803
... More
Providing and fixing PTMT swivelling shower with arm - 15mm nominal bore - Weighing not less than 40gms.
1
454
454
... More
Providing and fixing PTMT shower rose of 100mm diameter with 15mm dia inlet shower arm etc complete as per the direction of Engineer in charge. (Prayag)
1
706
706
... More
Supplying and fixing PTMT Health faucet - 15mm dia of Prayag or equivalent make as approved by the Engineer-in-charge
1
876
876
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95 x 69 x 100 mm with 1/2" BSP thread and shape as per BIS specification, weighing not less than 60 gms (Prayag or equivalent)
1
467
467
... More
Providing and fixing of PTMT Liquid soap dispenser of make Prayag with necessary Screws and etc. complete as per direction of Engineer-in-charge
1
250
250
... More
Providing and fixing PTMT (An Engineering thermoplastic) bib cock of approved quality colour and make (Prayag or equivalent)
-
-
-
... More
15mm nominal size, 86 mm long, 102mm high and 43mm wide with 12mm seat dia and replaceable Washers, weighing not less than 90 gms
1
188
188
... More
15mm nominal size, 122 mm long, 110mm high and 43mm wide with 12mm seat dia and replaceable washers, weighing not less than 105 gms
1
231
231
... More
Providing and fixing PTMT (An Engineering thermoplastic) pillar cock of approved quality colour and make (Prayag or equivalent) 15mm nominal size, 107 mm long, 131mm high and 43mm wide with 12mm seat dia and replaceable washers, weighing not less than 110 gms
1
274
274
... More
Providing and fixing PTMT (An Engineering thermoplastic) push cock of approved quality colour and make (Prayag or equivalent) 15mm nominal size, with 12 mm BSP female threads, 80mm long, 30mm high and 30mm wide with 12mm seat dia and replaceable washers, weighing not less than 47 gms
1
148
148
... More
Providing and fixing PTMT angle stop cock 15 mm nominal size with deluxe handles, 59 mm wide, 125 mm high and 42 mm breadth with 12 mm seat dia. And replaceable washers, weighing not less than 90 gms. Provided with flange of 56 mm dia. of approved quality, colour and make (Prayag or equivalent)
1
211
211
... More
Providing and fixing PTMT Flange 15 mm size, 56 mm dia. suitable for 15 mm taps and weighing not less than 5 gms. (Prayag or equivalent)
1
44
44
... More
Providing & Fixing PTMT Extension Nipple for water tank pipe, fittings of approved quality, color & make (Prayag or equivalent)
-
-
-
... More
Providing and fixing PTMT extension Nipples 15 mm size with 12" BSP threads, 70 mm length and 30 mm breadth and weighing not less than 18 gms. (Prayag or equivalent)
1
36
36
... More
- do- but 25mm nominal size, with dimensions 69x43x43 mm weighing not less than 45gms
1
48
48
... More
- do - but 25mm nominal size, with dimensions 69x43x43mm weighing not less than 65gms
1
65
65
... More
Supplying and fixing with new CP brass bib cocks/ angle valve/stop cock / pillar tap/Push cock ( quarter turn/ corn type (metro/Kohler/ equivalent)) etc including cost of material, thread, white metal putty etc complete.- (15/20mm dia).
1
1018
1018
... More
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms (Metro / Parryware)
1
1138
1138
... More
Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms (Metro / Parryware)
1
1167
1167
... More
Supplying and fixing CP brass long body bib cock of Jaguar make or equivalent approved by the Engineer-in-Charge of 20mm dia nominal bore etc complete.
1
2319
2319
... More
Supplying and fixing CP brass bib cock of Jaguar make or equivalent approved by the Engineer-in-Charge of 15mm dia nominal bore etc complete.
1
2041
2041
... More
Supplying and fixing CP brass bib cock of kohler make (Aleo 20073IN-4-CP) approved by the Engineer-in-Charge of 15mm dia nominal bore etc complete.
1
3618
3618
... More
Providing and fixing of 20mm dia CP Brass Swan neck Tap in Metro / Equivalent approved make including necessary fittings etc. complete
1
2667
2667
... More
Supplying and fixing with new CP brass bib cock, angle valve, pillar tap etc including cost of material, thread, white metal putty etc complete. (15/20mm dia)
1
1018
1018
... More
Providing & fixing 15mm dia CP brass metro 2 in 1 tap (Tap with angle valve) of approved brand and specification with CP extension nipple of required length, CP flange and making good the walls
1
1566
1566
... More
Providing and fixing of 20mm dia CP Brass Lab Tap three way in Metro / Equivalent approved make including necessary fittings etc. complete
1
2517
2517
... More
Providing and fixing of 20mm dia Metro or equivalent make C.P. concealed super deluxe stop cock and etc. complete.
1
1342
1342
... More
Providing and fixing of Jaquar Conceal Stop Cock With Upper Plate for urinal (FLR-CHR-5089N) etc. complete.
1
2003
2003
... More
Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931. (Metro / Parryware) 15mm nominal bore
1
1039
1039
... More
Providing and fixing brass gate valve with CI wheel of approved quality (Screw ended) (Leader / Audco / Horizon)
-
-
-
... More
15mm nominal bore
1
706
706
... More
20mm nominal bore
1
1223
1223
... More
25mm nominal bore
1
1929
1929
... More
32mm nominal bore
1
2409
2409
... More
40mm nominal bore
1
3148
3148
... More
50mm nominal bore
1
4742
4742
... More
Providing and fixing gun metal gate valve with CI wheel of approved quality (Screw ended):
-
-
-
... More
20mm nominal bore.
1
716
716
... More
25mm nominal bore.
1
1038
1038
... More
32mm nominal bore.
1
1587
1587
... More
40mm nominal bore.
1
2170
2170
... More
50mm nominal bore.
1
2967
2967
... More
Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron/DI , Class B (IS : 1536)
-
-
-
... More
100 mm dia C.I. Double Flanged Pipe
1
2393
2393
... More
150 mm dia C.I. Double Flanged Pipe
1
3799
3799
... More
Laying in position S&S or flanged C.I /DI special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials)
1
419
419
... More
Providing and fixing 32mm dia CPVC valve for CPVC pipe line including cutting and fixing and etc complete
1
584
584
... More
Providing and fixing 50mm dia CPVC valve for CPVC pipe line including cutting and fixing and etc complete
1
640
640
... More
Supplying and fixing CP wall mixer of Jaguar make or equivalent approved by the Engineer-in-Charge of 15mm dia nominal bore etc complete.
1
9344
9344
... More
Providing and fixing of Metro make CP brass wall mixer with necessary flange and etc complete as per direction of Engineer in Charge 15/20mm dia.
1
4454
4454
... More
Providing and fixing of CP Head in Metro/Jaquar make for pillar cock, Bib cock and angle cock etc. complete
1
507
507
... More
Providing and fixing Metro /Equivalent spindles with washer to the pillar cock, Bib cock and long body tap, etc complete.
1
256
256
... More
Providing and fixing of 20mm dia extension nipple with a length of 50 to 75mm with necessary fittings etc., complete as per direction of engineer in charge.
1
145
145
... More
Providing and fixing of CP Health Faucet in Metro make including all necessary fittings etc. complete
1
1721
1721
... More
Providing and fixing of CP Health Faucet in Kohler make (Kohler - 12925IN-CP) including all necessary fittings etc. complete
1
2056
2056
... More
Providing and fixing of 40mm thick CP Brass waste Couplings for approved make and etc. complete
1
956
956
... More
Providing and fixing of CP Brass Metro make Bottle Trap with flange and etc complete
1
1665
1665
... More
Providing and fixing of CP Brass Kohlar make Bottle Trap (K-7314IN-CP) with flange and etc complete
1
2350
2350
... More
Providing and fixing of Metro / Equivalent CP brass urinal spreader including necessary screws and 'M' Seal filling etc complete as per direction of Engineer-in charge
1
567
567
... More
Providing and fixing automated sensor spreader for urinals (Parryware Retrofit AC model / DC ).
1
11528
11528
... More
Providing and fixing of CP Liquid soap container with necessary Screws and etc. complete as per direction of Engineer-in-charge (Metro / Parryware)
1
1137
1137
... More
Providing and fixing of CP Brass Soap dish with CP Brass Screws and etc. complete as per direction of Engineer-in-charge. (Metro / Parryware)
1
1039
1039
... More
Providing and fixing CP brass shower rose with 15 or 20 mm inlet (Metro / Parryware)
-
-
-
... More
150mm diameter
1
536
536
... More
100mm diameter
1
503
503
... More
Replacing the faulty shower arm (Metro /Plumber) with new fittings. Charges including all material, labour etc complete.
1
420
420
... More
Supplying and fixing toilet paper holder (CP) parryware or equivalent
1
407
407
... More
Supplying and fixing FRP tank made using randomly packed glass fibre reinforcement of required capacity using Drinking water potability polyester Food Grade Resin(inner Layer ) as the matrix. The outer layer of the tank should be Laminated with Ultra Violet Stabilised polyester resin as the binding fiber matrix. The wall thickness and the physical properties of tank should confirm BS 4994:1987 standards. Wall Thickness minimum 4.0mm. Necessary test certificate should be submitted by the manufacture for leak proof test conducted as per BS 4994:1987. The rate inclusive of supply, erection of tank with all accessories, including lifting of tank to terrace level etc. complete. The tank also should provided with manhole cover with locking facility, inlet and out let pipes etc., complete.
500
24
12000
... More
Making connection of drain or sewer line with existing manhole including breaking into and make good the walls, floors with cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand / M sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with Cement mortar 1 :3 etc – complete. For pipes 100 to 250 mm diameter
1
602
602
... More
Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight SFRC cover with frame of 300x300mm size with weight of 7.20kg/Sqcm - with sewer bricks
-
-
-
... More
100x100mm size P type
1
2000
2000
... More
150x100 mm size P Type or 200 x 100mm
1
2685
2685
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole to be paid separately) Rectangular manhole 120 x 90 cm with circular cover 500 mm dia of grade MD - 10
1
4142
4142
... More
Constructing masonry chamber 60 x 60 x up to 100 cm, inside with 100 class designation flyash concrete block brick work in cement mortar 1:5 (1 cement : 5 fine sand / / M sand) for sewer line intersections and top cover with SFRC cover with frame of approved grade, necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand / M sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand / M sand) 12mm thick finished with a floating coat of neat cement complete as per standard design. With flyash concrete blocks class designation 100
1
20702
20702.64
... More
Constructing masonry chamber 45 x 45 x 50 cm, inside with 100 class designation flyash concrete block work in cement mortar 1:5 (1 cement : 5 fine sand / M sand) for sewer intersection with SFRC cover with fame, finishing the interior with cement mortar 1:3 floating coat with cement etc complete. With flyash concrete block of class designation 100
1
10263
10263
... More
Constructing fly ash brick masonry chamber 60 x 60 x 75 cm,-Constructing brick masonry manhole / chamber in cement mortar 1:4 ( 1 cement : 4 coarse sand / M sand ) with R.C.C. top slab with SFRC over with frame of grade M25 or above, earth work, foundation concrete 1:4:8 mix (1 cement : 4 coarse sand / M sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand / M sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand / M sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
1
12062
12062
... More
Constructing masonry chamber 90x90x100 Cm, inside with 100 class designation brick work with in cement mortar 1:4 (1 cement : 4 coarse sand / M sand ) SFRC Cover excavation foundation concrete 1:5:10 (1cement : 5 fine sand / M sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand / M sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with fly ash concrete bricks.
1
21184
21184
... More
Constructing masonry champer 60 x 60x50 Cm, inside with 100 class designation brick work with in cement mortar 1:4 (1 cement : 4 coarse sand / M sand ) SFRC Cover excavation foundation concrete 1:5:10 (1cement : 5 fine sand / M sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand / M sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with fly ash concrete bricks.
1
10831
10831
... More
Taking out C.I. Cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work and stacking of useful materials near the site and disposal of unserviceable materials within 50 m. lead
1
262
262
... More
Supplying and fixing CI cover 300 x 300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg (Neco)
1
347
347
... More
Supplying and fixing CI cover without frame for manholes:
-
-
-
... More
455 x 610 mm rectangular CI cover (light duty) the weight of the cover to be not less than 23 kg
1
1491
1491
... More
500 mm diameter CI cover (medium duty) the weight of the cover to be not less than 58 kg
1
3317
3317
... More
560 mm diameter CI cover (heavy duty) the weight of the cover to be not less than 108 kg
1
7080
7080
... More
Providing and fixing Indian Standard SFRC (heavy duty HD-20 grade designation confirming to IS 12592 :2002) cover with frame of size 600x600mm including finishing etc all complete
1
2995
2995
... More
Providing and fixing Indian Standard SFRC cover (heavy duty MD-10 grade designation confirming to IS 12592 :2002) with frame of size 300x300mm including finishing etc all complete
1
1641
1641
... More
Providing and fixing pre-cast cement concrete SFRC cover slab (rubber moulded- pattern similar to the cover provided at IITM stadium) over drain (90cm span x width 60cm x 8cm thickness or higher thickness) of grade M35 (heavy duty HD-20 grade designation) for covering the drain. The SFRC cover should be reinforced with steel fibre and HYD steel bars and sides of the slab protected with steel angles of size 50x50x3mm including casing, hoisting and placing in position over the existing drain. The rate inclusive of steel fibre, reinforcement, placing of SFRC cover etc complete.Day to day complaints - Plumbing works
1
3122
3122
... More
Drain Block: Charges for Removal of blockage in gully trap, floor trap, WC using appliances like rubber plunger , steel rods etc complete without any damage to the fittings, including flushing the trap etc after cleaning and removal and disposal of cleaned material at suitable place out side the campus or place pointed out by Engineer incharge for kitchen & Bath room Nahini trap/ floor sump / bottle trap.
100
164
16400
... More
Drain Block: Charges for Removal of blockage gully trap, floor trap, WC using appliances like rubber plunger , steel rods etc complete without any damage to the fittings, including flushing the trap etc after cleaning and removal and disposal of cleaned material at suitable place out side the campus or place pointed out by Engineer incharge. IWC /EWC Blockage.
50
298
14900
... More
Drain Block: Charges for Removal of blockage gully trap, floor trap, WC using appliances like rubber plunger , steel rods etc complete without any damage to the fittings, including flushing the trap etc after cleaning and removal and disposal of cleaned material at suitable place out side the campus or place pointed out by Engineer incharge. Out side gully.
50
236
11800
... More
Drain Block: Charges for Removal of blockage gully trap, floor trap, WC using appliances like rubber plunger , steel rods etc complete without any damage to the fittings, including flushing the trap etc after cleaning and removal and disposal of cleaned material at suitable place out side the campus or place pointed out by Engineer incharge. Inspection chamber
30
297
8910
... More
No water: charges for removal of blockages in water supply line (including release of air lock) by removing and refixing the pipe line to the required length , cleaning the pipes using the steel wire brush etc complete and ensuring free flow of water-over roof, in bath room, WC, wall surface , kitchen etc, (Any pipe pieces, fittings etc required shall be paid for separately). This item shall be operated only when the work requires removal of the existing pipe and re-fixing the same. Non availability of water due to other cause like empty tank will not be paid under this. To be operated whenever repalcement of parts are required. Pipe removal of pipe up to 6m
30
490
14700
... More
No water: charges for removal of blockages in water supply line (including release of air lock) by removing and refixing the pipe line to the required length , cleaning the pipes using the steel wire brush etc complete and ensuring free flow of water-over roof, in bath room, WC, wall surface , kitchen etc, (Any pipe pieces, fittings etc required shall be paid for separately). This item shall be operated only when the work requires removal of the existing pipe and re-fixing the same. Non availability of water due to other cause like empty tank will not be paid under this. To be operated whenever repalcement of parts are required) Pipe removal 6.1m to 12m
20
650
13000
... More
No water: charges for removal of blockages in water supply line (including release of air lock) by removing and refixing the pipe line to the required length , cleaning the pipes using the steel wire brush etc complete and ensuring free flow of water-over roof, in bath room, WC, wall surface , kitchen etc, (Any pipe pieces, fittings etc required shall be paid for separately). This item shall be operated only when the work requires removal of the existing pipe and re-fixing the same. Non availability of water due to other cause like empty tank will no tbe paid under this. To be operated whenever repalcement of parts are required) Pipe removal above 12m
20
810
16200
... More
Flush not working: charges for Restoring the flushing cistern of any make in toilets to working condition including removal, cleaning and re-fixing the internal parts/units etc complete. (Fittings for replacement of required will not be paid separately). The rate is including replacement of internal fittings.
20
600
12000
... More
Flush not working: charges for Restoring the flushing cistern in toilets to working condition including removal, cleaning and re-fixing the internal parts/units etc complete. (Fittings for replacement of required will not be paid separately). The rates are servicing, replacement of washers etc.
20
162
3240
... More
Tap fault: charges for stopping leakage in stop cocks (concealed and open type), bib cocks, brass tap, angle valve, pillar tap, mixers etc including replacement of washers etc complete. The rate shall include the cost of washer.
10
141
1410
... More
Pipe leakage: charges for stopping the leakage in the water supply pipe lines of all dia provided internal work (Exposed pipe line) including removal, rethreading and refixing of the pipe line (Pipes, elbows, unions, reducers, nipple etc required shall be procured by contractor) including necessary scaffolding: pipe dia 15mm to 50mm (Leaking of water should be arrested at the same day of complaint)
10
706
7060
... More
Pipe leakage: charges for stopping the leakges in the water supply pipe lines of GI/Alumnimum composite /PVC pipes of all dia (15mm to 25mm ) internal work. (concealed in walls) including removal, rethreading and refixing of the pipe line (PVC /GI/Aluminum composite pipe) to required length complete (Pipes , elbows, unions, reducers , nipple etc., required shall be procured by contractor.) This work includes chipping the wall tiles or plastering in wall and restoring the wall surface to the original condition by refilling the chases with CC of 1:2 :4 using 6mm nominal size aggregate required pipe, fittings and matching wall tiles or matching with existing surface, cement sand coarse aggregate including necessary labour for masonry tile work etc shall be arraged by thr contractor (Leaking of water should be arrested at the same day of complaint)
5
1076
5380
... More
Repairing the health faucet including the replacing of washer etc., complete.
5
138
690
... More
Cleaning the Toilet for floor / wall tile EWC, IWC, washbasin, mirror other fixtures in the toilet washing with diluted acid/soap liquid etc complete as directed.
5
666
3330
... More
Labour charges for fixing EWC with trap including fixing flush tank seat cover etc complete as per the direction of Engineer in charge. Parrware / Somany/ Hindware
5
1330
6650
... More
Labour charges for fixing of Geyser / lab equipments / washing machine connection including providing necessary clamps and screws, nails by using drilling machine for making holes and wooden plugs etc complete as the direction of Engineer In Charge.
5
799
3995
... More
Painting works
-
-
-
... More
Note: - 1. The Rate should include all material labour scaffolding wherever required cleaning of dirt, preparation of surface
-
-
-
... More
2. Mode of measurement, Coefficient & deduction for opening shall be as per C.P.W.D., specification
-
-
-
... More
Distempering with oil Bound washable / dry distemper of approved brand and manufacture to give an even shade in all floors. (Old work). ( Asian / ICI / Berger)
-
-
-
... More
One or more coats.
50
59
2950
... More
Two or more coats.
30
115
3450
... More
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade to given an even shade in all floors (old work). ( Snowcem plus / Durocem)
-
-
-
... More
One or more coats including priming coat.
50
96
4800
... More
Finishing walls with water proofing cement paint of required shade-Old work One or more coats.
50
63
3150
... More
Enamel painting for doors / windows / wall panels (two or more coats including a coat of primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats over a coat of primer as per Annexure A.1.4. (Top coat enamel coverage not less than 8.83sqm per litre for two coats over a coat of primer as per manufacturers specifications). The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc. (Asian (Premium Gloss Enamel) / Berger Luxol High Gloss Enamel / ICI (AkzoNobel) Gloss Enamel / Nerolac / Nippon Hi Gloss Enamel).
10
153
1530
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade in all floors for wood/steel work. 1st quality. ( Asian / ICI / Berger)
-
-
-
... More
One or more coats : Enamel painting for doors / windows /steel works / wall panels (one or more coats excluding primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint one or more coats. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
20
65
1300
... More
Two or more coats : Enamel painting for doors / windows / steel works / wall panels (two or more coats excluding primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
20
94
1880
... More
Interior Acrylic Interior emulsion paint (ICI /Asian / Berger / Nippon / Nerolac): (One or more coats excluding complete scraping and primer but including other surface preparation like removal of loose paint residuals, damaged plastering, high pressure jet washing, repairs to plaster, white cement based (JK / Birla) touch up putty / primer and making good the wall surface etc). Applying interior Acrylic Interior emulsion paint ( Asian / ICI / Berger) of approved colour, make, brand and surface coverage of painting as per the manufacturer specefication. The interior paint shall be applied over dry surface after removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with High pressure Jet washing whereever required before application of top coat of interior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying top coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport,scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
30
71
2130
... More
Removing the existing wall finishing in interior faces such as white washing/Oil Bound distempering/plastic Emulsion paint etc., by thoroughly scrapping, sand papering, cleaning washing and preparing the surface smooth including necessary repairs to scratches cleaning etc., complete
10
13
130
... More
Prepare surface and re - polishing the old wooden surface using approved quality & make French polish /varnish including bees waxing wood filler etc., and such other required materials, one or more coat to give an even shade. (ICI / Asian / Berger / Nerolac / Nippon / Sheenlac)
10
161
1610
... More
Applying super premium quality 100% Exterior Acrylic (Asian / ICI /Berger / Nippon / Nerolac) emulsion : (Fresh work including complete scraping / surface preparation, as appropriate base (primer) coat and top two or more coats). Applying exterior paint of approved colour, make, brand and surface coverage of painting as per the manufacturer specification. The exterior paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with High pressure Jet washing and sealing the surface with necessary exterior base coat or primer before application of top coat of exterior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying base or primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport , scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc but excluding the cost of waterproofing, attending to leakages and major civil repair works if any. The Paint manufacturer shall inspect the work in every stage, submit inspection / field test report, certify the product / application and give 10 year Guarantee.
10
183
1830
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing paint surface
20
152
3040
... More
Applying super premium quality 100% interior Acrylic emulsion paint (ICI /Asian / Berger / Nippon / Nerolac) : (two or more coats over a primer coat including complete scraping, other surface preparation like removal of loose paint residuals, damaged plastering, repairs to plaster, white cement based (JK / Birla) touch up putty / primer and making good the wall surface etc) Applying interior paint of approved colour, make, brand and product with surface coverage of painting as per the manufacturer specification. The interior paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with sealing the surface with a coat of approved interior primer before application of top coat of exterior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
20
126
2520
... More
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work (ICI /Asian / Berger)
10
117
1170
... More
Melamine polishing with spray (one or more coats including a coat of wood filler and sealant) with finishing neat etc. complete. (MRF or Equivalent)
10
126
1260
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface etc. complete. (JK white / Birla white)
10
68
680
... More
Painting with water based enamel paint : Wall painting using water based enamel paint (ICI /Asian / Berger): (two or more coats over a primer coat including complete scraping and surface preparation) Applying water based enamel paint of approved colour, make, brand with surface coverage of painting as per the manufacturer specification. The water based enamel paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with sealing the surface with a coat of approved primer before application of top coat of water based enamel paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc but excluding the cost of waterproofing, attending to leakages and major civil repair works.
10
153
1530
... More
Wall painting using water based enamel paint: (two or more coats excluding primer coat and complete scraping but including surface preparation like removal of loose paint residuals, damaged plastering, repairs to plaster and making good the wall surface etc wherever required) Applying water based enamel paint of approved colour, make, brand and product at the approved rate of surface coverage of painting as per Annexure A.1.2. The water based enamel paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with sealing the surface with a coat of approved primer before application of top coat of water based enamel paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions mentioned in the Annexure 1. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
5
100
500
... More
Finishing with Epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer’s specification including appropriate priming coat, preparation of surface etc complete. On steel work (Asian/Berger/ICI).
1
255
255
... More
Painting the existing floor with Rubbersied paint (MRF or equivalent) of two or more coat for court marking. The paint shall be applied through cleaning, sealing the cracks and the rate inclusive of labour, material etc complete.
1
250
250
... More
Lettering with Black Japan paint of approved brand and manufacture
10
5
50
... More
Re-lettering with black Japan paint of approved brand and manufacture
5
3
15
... More
Painting (One or more coats) with black Japan paint of approved brand and manufacture to give an even shade
5
83
415
... More
Repainting G.I pipes and fittings with synthetic enamel white paint of approved quality (Asian / ICI / Berger)
-
-
-
... More
15 mm dia nominal bore
5
11
55
... More
20 mm dia nominal bore
5
13
65
... More
25 mm dia nominal bore
2
17
34
... More
32 mm dia nominal bore
10
21
210
... More
40 mm dia nominal bore
10
24
240
... More
50 mm dia nominal bore
10
29
290
... More
Painting G.I pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. (Asian / ICI / Berger)
-
-
-
... More
15 mm dia nominal bore
5
16
80
... More
20 mm dia nominal bore
5
19
95
... More
25 mm dia nominal bore
5
32
160
... More
32 mm dia nominal bore
10
29
290
... More
40 mm dia nominal bore
10
35
350
... More
50 mm dia nominal bore
10
55
550
... More
Painting the special theme design over Texture paint with approved colour and design as per the direction of Engineer in charge. (Asian paint textured paint)
1
501
501
... More
Marking and Painting the parking area lines using with MRF Rubberized yellow paint of superior make as approved by the Engineer-in-Charge, including cleaning the surface of all dirt, scales and other foreign material etc. and lining out complete. New work (Two or more coats) width upto 100mm
3
93
279
... More
Providing and applying cement based putty M/s Birla or equivalent of upto 2 mm thickness over plastered surface to prepare the surface even and smooth etc complete
5
246
1230
... More
Removing and stacking of existing wooden partition carefully loading, unloading, transporting within IIT premises.
1
436
436
... More
Providing and fixing of Wirecut bricks walls in Cement mortar 1:4 for sitting bench including necessary pointing works and etc complete.
0.3
17429
5228.7
... More
Supplying and laying Hincol road Bond in PP bags as per the manufacture specification. The rate inclusive of surface preparation by cutting the pot holes in proper shape, cleaning thoroughly, applying a coat of bitumen primer, rolling with power roller and applying a layer cement over the finished surface.
1
1891
1891
... More
Supplying and installation of Sandwich PUF panel / block of 80mm thick confirm to best International / Indian Standards. Density : 40 +2 Kg / M 3 (PU) Closed cell content : 90 – 95% Temperature range : - 100o C to + 90 o C Water absorption : 1% K factor : 0.22 U factor : 0.019 – 0.022 Self Extinguishing : As per ASTM D 1692 The materials, both PUF block and Panel should be fire resistant and should have excellent self-extinguishing characteristics. The bidder has to specify the fire resistant characteristics of the material. Both side of panel elements are made up of 0.5 mm thick hot deep galvanized and pre-painted steel sheets. The color coating should be of approved color at least 25 micron silicon polyester on 120 gms / m 2 of Zinc coating. The steel sheets should have formed grooves to provide extra strength as well as to enhance the appearance of cladding. The panel should be manufactured by pressure injection of CFC free Poly urethrene foam at 40 +2 Kg/m 3 density, in between the outer and inner steel sheet surfaces. The wall panels either be complete with tongue and groove joint together or Cam Lock joint with flushing. The Cam Locks should be of G.I /PVC material and minimum of 0.7 mm thick. The rate inclusive of channel and all necssary fittings required to provid in top and bottom of the partition to support the PUF panel etc., complete. The bidder should provide the manufacturing certificate conforming to CFC free method of manufacturing and paint & zinc coating thickness. The rate inclusive of necessary fixters for installation of partition, selaing the joints with PU/ Silicon selant etc., complete.
1
3000
3000
... More
Supplying and fixing PVC cover for PVC rainwater / SWR pipe - diameter various from 75mm to 160mm.
1
43
43
... More
Preparing surface and applying cement based water proofing coating Brush Bond of FOSROC or equivalent coatings mixed with cement and water proofing compound at the ratio of 1 kg for 12 sqm in each layers and applying for two different stages and etc complete as per direction of Engineer in charge.
0.1
350
35
... More
Repairs to Vertical Blinds: Repairs to vertical blinds with 100 / 89 mm wide imported superior polyester base fabric vanes with Scotch guard application including replacement of damaged blind. Repairs to head rail of extrude anodized high strength aluminum alloy of size 25mmx 50mm high or equivalent with wall thickness of 1.2mm. This item includes repair / replacement of end control units consist of reduction gearbox having the reduction ratio of 3.5:1 for a very smooth operation of the blind if needed. This repairs work includes repairs to planetary gear in the outer housing, four small transmission gears fitted in the middle assembly and a end receiving gear attached to central sprocket Unit, Tilter chain is made of 4.5mm plastic beads moulded on 2.2mm thick polyester card if needed, pitch of the beads is 6mm , end control unit has the facility to rotate the louver by 180 degrees, Tilt rod is made of extruded aluminum having 3 keyways and the average dia shall be 5.8 mm carrier (Runner) is made of moulded plastic.
3
653
1959
... More
Replacing of damaged Novopan Boards of all types: Replacing the damaged / decayed novopan / Ply wood of thickness up to 18mm for doors and partitions, furniture’s including cost of material such as fevicol, nails, screws etc complete. For the ply wood work surface shall be made to match with existing surface finish such as mica of 1mm thick or enamel paint - Upto 0.5 Sq.m
1
406
406
... More
Replacing of damaged Novopan Boards of all types: Replacing the damaged / decayed novopan / Ply wood of thickness up to 18mm for doors and partitions, furniture’s including cost of material such as fevicol, nails, screws etc complete. For the ply wood work surface shall be made to match with existing surface finish such as mica of 1mm thick or enamel paint - Upto 0.5 to 1.5 Sq.m
1
1118
1118
... More
Replacing of damaged Novopan Boards of all types: Replacing the damaged / decayed novopan / Ply wood of thickness up to 18mm for doors and partitions, furniture’s including cost of material such as fevicol, nails, screws etc complete. For the ply wood work surface shall be made to match with existing surface finish such as mica of 1mm thick or enamel paint - Upto 1.5 to 2.5 Sq.m
1
2056
2056
... More
Labour charge for repairing the existing wooden door / window frame shutters including repairs to the existing frames / shutters after removing from the original position and refixing the same after repairing. . The rate inclusive of cost of wooden pieces, screws etc but excluding cost of fittings. The rate shall be applicable to area of opening up to 3.00sqm. The Payment will be made for each shutter of door / window.
1
659
659
... More
Repairs to false ceiling of various type such as Gypsum, Mineral board or any type including necessary repairs to grids, the rate inclusive of labour, material, scaffolding etc complete.
-
-
-
... More
Area up to 1 Sqm.
1
1154
1154
... More
2 Sqm and up to 3 Sqm
1
2161
2161
... More
Supplying and pouring chemical anchor fastener Lockfix of FOSROC or equivalent product for fixing reinforcement up to 16mm dia bars the rate inclusive of making necessary hole up to a depth of not less than 100mm in RCC element, charges for scaffolding, cleaning the hole etc., complete.
1
250
250
... More
Supplying and fixing nails / screws of all size to hang the boards / photos using appropriate drilling machine , pvc/ wooden plug etc., complete.
10
10
100
... More
Easing of windows / doors for smooth operation including removal and refixing if required after planning the edges etc, necessary painting of the planned surface with matching paint over a coat of primer, necessary hinges, screws etc complete. (rate for one shutter)
10
100
1000
... More
Providing and fixing of stainless steel matt finished wall mounted Foldaway grab bar for Physical challenged safety handle of size 35x760mm long VIKING or equvalent.
1
13019
13019
... More
Providing and fixing of stainless steel matt finished wall mounted grab bar for Physical challenged safety support handle rail of size 25x450mm long. VIKING or equvalent.
1
1455
1455
... More
Providing and fixing of stainless steel matt finished wall mounted grab bar for Physical challenged safety support handle rail of size 25x600mm long. VIKING or equivalent.
1
1907
1907
... More
Epoxy Flooring 2mm thickness : Preparation of surface by power grinding machine for smooth finishing without any undulations on existing floor and cleaning manually without any dust found in the floor. The rate inclusive of application of primer, Screed , top coat with desired color on the screed surface. The coverage , application procedure etc., as per manufacturere specification. The rate is inclusive of all materials & labour charges etc complete as per direction of Engineer in charge. (Brand : Metcon / Fosroc / Cipy / BASF / SIKA )
1
1238
1238
... More
Epoxy ESD flooring 4mm thick by providing necessary copper strip : SURFACE PREPARATION: The surface should be free from oil, grease and foreign particles which will be achieved by mechanical power tool / manual cleaning andsolvent cleaning & grinding the surface with heavy duty Floor Grinder. LooseLaitence will be removed.
PRIMER: Providing & Applying two component penetrating primer, CIPOXY 11,having a volumetric mixing ratio of 1 : 1 (equal portion by volume of resin and hardner is mixed), to a thickness of 100 microns which has excellent bond with concrete substrate by Brush / Roller and broadcasting of chemically treated silica and allow for 5 - 6 hours curing.
SCREED APPLICATION: Providing & applying two components CIPOXY-16 mortar in the ratio 1: 1 and mixed with 2 parts of Silica Quartz in a power mixer to achieve homogeneous mix and applied and leveled by trowelling to form a monolithic layer to a thickness of 900 microns and allow curing for 4–5 hours.
FIXING OF COPPER TAPE: The self adhesive copper tape is stuck at the peripheries of the floor and joined to the ground. All concrete pads are electrically connected across expansion & control joints by fixing copper tape. Copper tape is also fixed at every 20 meters across both lengthwise and breadth-wise.
CONDUCTIVE COAT: Providing & Applying of AQUOXY ESD, at a specified ratio to a thickness of 100 microns by Brush / Roller and broadcasting of chemically treated silica and allow for 12 hours curing. (100 microns)
TOP COAT: Providing & applying of STAT GUARD ESD at a specified ratio and leveled by trowel to a thickness of 1000 microns and spike roller is applied for deaeration.
This can be given in any colour. The entire top coat has to be dried for 24 hours.
1
4281
4281
... More
Supply of RCC precast box culvert of M40 or higher Grade concrete using Fe 500 Grade reinforcement (weight of the reinforcement assumed as not less than 100 Kg/ cum). The rate is including loading, transport and unloading charges, placing at site etc., complete.The box element should withstand IRC Class AA loading norms.
1
29353
29353
... More
Supplying and laying ESD Vinyl flooring 2mm thick with copper strip of Amstrong make using with necessary adhesive of Aerobond 44/SR998 and thermo welding for copper strip joints etc complete., as per direction of Engineering incharge.
1
2907
2907
... More
Providing and fixing white vitreous extended wall mounting water closet of Jaguar make (Model No-Jaq SLS-WHT-0117/6951 W/H Water Closet with W/Seat cover 1026 white) of approved shape with necessary fittings, nuts, bolts and gasket etc complete.
1
16208
16208
... More
Providing and fixing of Geberit Kombifix Element for Wall-Hung WC, H82, with Omega Cistern 12 cm (Model No- Geb 110.150.00.1 Kombifix Tank) with Delta Dual Flush Actuator Plate (Model No Geb 115.125.21.1 Delta 21 CP plate ) and making shape with 4 fastening brackets & labours etc complete.
1
19569
19569
... More
Supplying and fixing CP Cockroch trap for the size of 125x125mm of Jaguar make including fixing in position etc complete..
1
1014
1014
... More
Providing and fixing NAME BOARD of size 0.92 x 1.22m using 1st class teak wood frame for alround, 12mm plywood on exposed surface and top with 35mm tk 1st class teak wood plank size of 0.92x0.23m with ornamental curving & logo work including necessary beading & hardware materials etc complete as per direction of Engineer in charge. (Design of the board should match with board available in Director / Chairman (EU) office.)
1
20806
20806
... More
120Mins Fire Steel Door with Dorma Hardware (door of any size- double or single leaf): with vision panel and hardware items.
Providing and fixing of Hollow metal fire rated doors as per BS 476 part-22 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry ratio 1:2 necessary for fire doors on the clear masonry opening.
1
27417
27417
... More
Door leaf shall be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be of size 200x300mm with a beeding and screws from inside. The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door.
All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt sprey test. 1. Dorma SS - Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SS -Size : 4"x3"x3mm.
2. Dorma SSS - Surface door closer TS68, size EN2,3,4, with standard arm, Silver finish
3. DORMA -Single point surface panic latch PHA 2000, Silver finish
4. PHT 3905 external trim with lock 5. DORMA -Euro profile cylinder 42mm with keys -SS304 finish
6. Clear fire rated glass, 6mm, 120min, of size 200 x 300mm - Schott Pyran S.
7. Gasket, Fire rated 4mm Thick x 13mm, Black
-
-
-
... More
FOR ARMSTRONG METALWORKS BAFFLE CEILING SYSTEM with 100mm X 25mm (125mm Spacing) RAL7001 (Metallic/Normal Silver Grey)
Providing and fixing Armstrong Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x 25 x 3600mm extruded aluminum box section with 125mm c/c spacing and making clear space of 100mm between two aluminum box sections finished – Powder coated with RAL7001 (Metallic/Normal Silver Grey) in color. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid:
The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter.
1
14893
14893
... More
Providing and fixing 3M black anti skid tap-dry 25mm width for safety walking in steps / ramps including labour charges and surface cleaning etc complete.
1
262
262
... More
Providing and fixing white vitreous china table top washbasin for the size 563x403x130mm (Kohler make-K-76601IN-0) with compatible CP waste coupling and necessary white cement etc complete as per directions of Engineer in charge.
1
16166
16166
... More
Supplying and fixing of polycarbonate sheet embossed clear sheet both side UV solid plain / Corrugated sheet of 3mm thick to cover over the existing MS structure at all levels as per direction of Engineer in charge. The rate is inclusive of aluminium snap beading with rubber,silicone sealant, self tap screws & labours etc., complete.
1
4236
4236
... More
Cutting grooves in concrete or bitumen surface by using diamond saw power cutter for the size of 10mm wide and 150mm depth as per direction of Engineer in charge
1
828
828
... More
Providing and fixing SS door handle (Dorma make XL-C back to back handle) and making holes in doors with necessary fittings & labour etc complete. Size-600mm long and 32mm dia
1
6628
6628
... More
Providing and fixing DORMA XL-C Dead lock (heavy duty) with special accessories for aluminum or glazed door with necessary fittings & labour etc complete.,
1
5825
5825
... More
Charges for dismantling and removing existing rolling shutter including removing hood cover with necessary cutting and scaffolding arrangements etc. complete as per the direction of Engineer in charge.
3
445
1335
... More
Convertion of existing rolling shutter into motorized Shutter Side Motor kalata make with Break and Side Bracket Plates for the automation of Rolling Shutter including Push button control switch, chain block arrangements for the manual operation including Roller Shaft arrangements & 6 CRCA lath strips 3.4 meter (more than 700 Kg lifting capacity).
1
57726
57726
... More
Grouting the tile joints with Laticrete products- Applying Latapoxy SP100 (Grouting of tiles to be done with MYKL Laticrete Latapoxy Sp100 stainfree grout as per the methodology specified in the technical data sheet of MYKL. 3mm width & 12mm depth grout to be provided between tiles to fill the joints. 1 Unit = 5 Kgs. Coverage: 24.53Sq.mt. per Unit ) in the tile joints. The rate inclusive of surface preparation, labour, material, tools and plants etc complete.Rate inclusive of materials, labour charges at all levels. For tile size 60x60cm
1
535
535
... More
Providing Mechanical core cutting of 50mm dia and depth upto 50mm for fixing pipes air cleaning for cutting holes removing of debris and labour charges etc., complete
1
209
209
... More
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 300x19x1.9mm
1
419
419
... More
Providing and erecting 1.5m to 2.0 metre high temporary barricading around the site execution area using KNITED FABRIC (Green Net) at site as per the direction of Engineer-in- charge. The Green Net shall be fixed to the framework made out of 75mm dia causirino post for vertical placed at about 3.00m centre to centre with required bracing using 63mm dia causirino post placed about 1.0m centre to centre forming a rigid frame work as per the direction of Engineer-in-charge. The barricade will remain in the same location till the completion of the project and including cost of conveyance of all required materials to work site & erecting the same, cost of G.I wire and labour charges etc., complete as per direction of Engineer-in-charge. The barricading provided shall be retained in postition at site continuously i/c shifting of barricading from one location to another location as many times as requried during the execution of the entire work till its complection. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works requried to excute the job. The barricading shall not be removed with out piror approval of Engineer-in-charge. (Note: One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
5
74
370
... More
Dismantling the existing wall tiles/mosaic dado laid in cement mortar in walls in Toilet/ Bath room etc as directed and including stacking material within 50m lead
5
80
400
... More
Providing and fixing door handle finishes of SS (Neki make butterfly type) and making holes in doors with necessary fittings & labour etc complete. Size-300mm long and 20mm dia
1
3571
3571
... More
Providing and fixing door handle finishes of SS (Dorma make XL-C 'H' type handle) and making holes in doors with necessary fittings & labour etc complete. Size-350mm long and 20mm dia
1
3860
3860
... More
Providing and fixing SS Spider of Rodan I Series One Point to wall fitting & Rodan Routel button head (Dorma make) with necessary fittings & labours as per the direction of Engineer in charge.
1
7474
7474
... More
Providing and fixing Urinal partition of 12mm thick compact laminated color of HPL board Suede Finished with SS bracket of approved quality and manufacturer specification etc complete as per the direction of Engineer in charge
1
9792
9792
... More
Providing and fixing of CPVC Pipe (SCH-40) with necessary couplings, solution and special clamp as per approved make ( Astral / Prince / Ashirvad or Equivalent ISI Make etc. complete. 100 mm nominal inner dia Pipes
1
3811
3811
... More
Providing and fixing CPVC elbow (SCH-40) in CPVC pipes including jointing of pipes & fittings with one step CPVC solvent cement etc, complete (New work) - 100mm dia. (Astral / Prince / Ashirvad)
1
1468
1468
... More
Providing and fixing CPVC Tee (SCH-40) in CPVC pipes including jointing of pipes & fittings with one step CPVC solvent cement etc, complete (New work) - 100mm dia. (Astral / Prince / Ashirvad)
1
2425
2425
... More
Levelling the surface earth/ soil and compacting with power roller of 5-10 tonne including watering and dressing. The rate inclusive of hire charges of roller, disel and diver bata etc complete
5
88
440
... More
Providing and fixing DORMA patch fitting of PT 20-Top Patch & PT 10-Bottom patch with special accessories for glazed door etc.,
1
8180
8180
... More
Providing and fixing DORMA patch fitting of US 10 Corner lock with EPC & LKP with special accessories for glazed door etc.,
1
6235
6235
... More
Removing the existing sealant with backer rod, Providing and fixing of 25 to 50x10mm Dow Corning-789 black Silicone Sealant in ACP & glass cladding joints including fixing backer rod,masking tap etc.
1
422
422
... More
Façade cleaning at ACP and Glass cladding area by using wipe with a soft cloth in fresh water, thinner for cleaning in residues and wash the surfaces with a piece of sponge, glass wipper by using solution of a neutral detergent and then wipe off the solution with a dry soft cloth etc complete
5
120
600
... More
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
5
11
55
... More
Providing and laying of Italian Marble of approved shade, colour and texture for slab / Pillar laid or fixed over cement mortar 1:4 (1 cement : 4 sand / M sand) / Araldite and etc complete as per the direction of Engineer-in-charge.
1
12883
12883
... More
Providing and fixing of 8mm thick toughenened Glass and for partition / Door shutter etc. complete as per direction of Engineer-in-charge.
1
4019
4019
... More
Cutting the hole to a proper shape and packing with cement mortar / white cement and making good to the existing wall finishing as per the direction of Engineer - In - Charge. Area upto 0.20 Sqm.
1
176
176
... More
Hire charges for engaging JCB towards levelling the earth and cleaning the site / removing unwanted junks accumulated over the venue area and etc., as directed by Engineer in charge. The rate including hire charges for JCB, diesel operator bata etc., complete.
10
1113
11130
... More
Hire charges for engaging Tipper lorry for intercarting the available earth accumulated over the venue etc as directed by Engineer in charge. The rate including hire charges for Tipper, diesel, Driver bata etc., complete.
1
6260
6260
... More
Providing and fixing GRC panels of 25mm thickness as per the Architectural drawings. The rate inclusive of cost for the panels, fixing charges, tools and tackles etc., complete. (frame work, putyy and painting extra which will be paid separately)
1
8542
8542
... More
Providing, cutting to the required shape and laying of 40mm thick rough Granite stone laid over prepared sand bed (cost for M-sand will be paid separetely) with a gap of 40mm between the granite slabs as per the approved pattern(curved and triangular shapes) and cutting the outer edges to make the required curved shape of the pathway etc., complete as per the direction of Engineer in-charge.
1
4278
4278
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand / M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x600 mm
1
2169
2169
... More
Providing and fixing monkey / bird proof GARWARE HDPE Net of 2.50mm thickness with 30mm openings . The net shall be white or any approved colour and the rate inclusive of transport and labour charges for fixing at terrace level as per the direction of Engineer in charge.
1
384
384
... More
Supplying, tightening and fixing 10mm dia Galvanized multiplex rope at 28.0m height to covering, monkey proof net in OTS area as per the drawing and etc complete.
1
223
223
... More
Providing and fixing SS D - Clamp (similar to the clams provided at EDB courtyard) for SS bottle clamp for providing GI cable as per the drawing details and etc complete.
1
556
556
... More
Charges for Polishing Stainless steel hand rails made of Hollow tubes, channels, plates etc., including buffing, polishing etc complete as per the directions of Engineer -in-charge.
1
49
49
... More
Providing and fixing hand drier of CAMRY make with single blower, with time delay, summer & winter control, music while drying, volume ON/ OFF controls including providing necessary brackets, cable from drier to Plug, Plug top key and lock etc, complete as required.
1
8257
8257
... More
Supplying and Fixing CP Paper towel Dispensor (Jaquar Make) with PVC rawl plug & C.P. brass screw etc complete as required.
1
8927
8927
... More
Providing and fixing 10mm dia 150mm Long Anchor fastener for fixing MS / SS frames including necessary drilling etc complete at all levels as per the direction of Engineer in charge.
2
186
372
... More
Providing and fixing Fire Brick of size 230x115x75mm masonry wall in bonding agent of Acoset and etc complete as per the direction of Engineer In charge.
1
8755
8755
... More
Supplying and filling of M sand red gravel mix equal ratio 1:1 (1 part M sand : 1 part red gravel ) admixed with 5% of cement by volume in layer of average compacted thickness 125mm and watering each layer thoroughly laying in uniform layers with compacting with power roller of 8-10 tonne including watering and dressing. complete as per specifications and directions of Engineer-in-Charge.
1
731
731
... More
Providing, laying and joint welding of HDPE pipes of 160mm/6kg dia heavy duty in the duct and connecting same to the existing 75mm or any other dia branch line from fume hood sink and other laboratory sink including welding , erection after exposing the existing pipe line in the trench with bricks above pipe line ,necessary tools and tackles etc. complete as per the directions of Engineer-in-charge. (Finolex / Astral)
1
3245
3245
... More
Providing and laying of 1 mm thick BUTYL flash strip membrane (Aluminium Finishing Sticker Type) Arresting seepage of water from Roof sheet joints and bolt joints etc complete including and applying sealant to the over lapping of the sheet., etc. complete as per the direction of the Engineer in charge.
1
3144
3144
... More
Providing and fixing stainless steel ( Grade 304) Tubular handle Set with necessary Bolts etc., complete - 450mm Length
1
5788
5788
... More
Applying Interior texture paint -Applying super premium quality 100% Interior Acrylic (Asian / ICI /Berger) emulsion two or more coat with texture finish (Asian Royale play or equivalent) as per the approved design over the dry surface. The rate is inclusive of applying base primer etc complete as per direction of Engineer incharge.
10
2245
22450
... More
Supplying and erecting Installation of fabric structure as per the approved design and the structure to be designed, fabricated and installed as per relevant Indian Standard norms. The canopy / fabric structure shall be designed for as per the wind speed prevalent in that area as per I.S. 875-Part 3. The steel structure shall be designed as per I.S. 800. The steel fabrication and erection shall be as per I.S. norms. The membrane shall be designed and fabricated as per European norms for design and practices. The rate quoted for the structure should be on area covered by canopy and the rate inclusive of design, preparation of detailed drawing, approval from IITM, supply and installation of canopy as per the approved design etc. complete. The rate inclusive of providing necessary anchor fastener for fixing the trusses to the existing building and foundation bolts etc., complete.
5
7521
37605
... More
Supply and installation of troughed aluminum coloured profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.70mm thick and 2.50 Kg/ Sqm Double side color - PVDF should be supplied in single length of 6.5 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (M/s Jindal or equivalent with ISI marks)
1
1399
1399
... More
Removing existing false ceiling with GI channels, cupboards carefully and stacking of serviceable material and disposal of unserviceable material within 50m lead.
1
175
175
... More
Providing and fixing fibre reinforced (asbestoes free) cement corrugated coloured sheet of 6mm thick of M/s Everest Industries or equivalent make (size, shape and pitch of corrugation as approved by Engineer-in-charge). The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1
434
434
... More
Extra Charges for hot dip galvanizing for MS steel section of 70 Microns instead of zinc primer and the rate is inclusive of transport from site, loading, unloading and fore frieght charges etc complete at all levels as per the direction of Engineer in charge.
1
55
55
... More
Providing and fixing of 12mm dia x 120mm length Hilty MS Anchor Fastner for fixing pipes including necessary drilling and grouting etc complete.
2
383
766
... More
Providing and fixing CP foot control valve of approved make to the existing wash basin / sink / Urinal including necessary fittings such as SS screws, rawl plug, PVC connection with brass unions 1m length of M/s Kohinoor make or equivalent. The rate is including modifying the existing plumbing / sanitary installation and making connection to the existing water line etc. complete (Make M/s.Vijay / M/s.INSCO)
1
2973
2973
... More
Providing & fixing white vitreous china flat back half stall Urinal (Model -Flat back Eureka - Hindware make Cat.No-60020) of size 600 x 370 x 390 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:
1
14754
14754
... More
Providing and fixing new White vitreous china flat back half stall urinal with white (Kohlar K-4991-ER-0 Bardon Series White Urinal With Rear Inlet 0.5 Litre With Accuflush - 457x360x715 mm) with all fittings,2" outlet spud, 3/4" inlet spud, Hanger(s) (Qty 2), Strainer including painting of fittings and cutting and making good the walls and floors wherever required
1
36602
36602
... More
Providing and laying in position of No-structural Light weight concrete - Xlite of M/s.Nuvoco brand or equivalent with 1200 kg/cum density using Expanded Polystyrene beeds (EPS) in terrace over lay / Sunken fil / Floor built up excluding cost of centering, shuttering, finishing and reinforcement if required complete at all levels as per the direction of Eningeer- in -charge. (minimum cementitious content 350 kg/ cum including fly ash).
5
11653
58265
... More
Supplying and fixing Ceramic based SRI tile of size 300 x 300mm having SRI above 79 laid on roofs jointed with cement mortar 1 : 4 (1 Cement : 4 M sand) mixed with 2% of integral water proofing compound and 3mm thick spacer with ABC grouted the tiles joints with epoxy base mortor ie. AB Ceramics PRODUCT : AB CERAMICS
9
1939
17451
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) etc., complete. Size-800x800x10mm tk . Somany make
1
1922
1922
... More
Supplying and fixing CP brass Angular stop cock with flange of ( Hindware make Model- Fluid, Cat No-F360006) approved by the Engineer-in-Charge of 20mm dia nominal bore etc complete
1
1615
1615
... More
Supplying and fixing CP brass two-way bib cock with flange of ( Hindware make Model- Fluid, Cat No-F360005) approved by the Engineer-in-Charge of 20mm dia nominal bore etc complete
1
2552
2552
... More
Supplying and fixing CP brass Pillar cock of ( Hindware make Model- Element, Cat No-F360001) approved by the Engineer-in-Charge of 20mm dia nominal bore etc complete.
1
2090
2090
... More
Supplying and fixing CP brass Pillar cock of Kohler or equivalent make approved by the Engineer-in-Charge of 15mm/20mm dia nominal bore etc complete.
1
10259
10259
... More
Providing and fixing of CP Brass Paper holder without cover plate (Hindware make model-Rubbic, Cat No-F870008) with CP Brass Screws and etc. complete as per direction of Engineer-in-charge
1
1693
1693
... More
Providing and fixing of CP Brass Paper holder without cover plate (Kohler make K-5633IN-CP) with CP Brass Screws and etc. complete as per direction of Engineer-in-charge
1
2099
2099
... More
Packing holes with white cement paste & finishing good to the wall surface properly wherever required as per the direction of Engineer Incharge. The rate inclusive of material and labour charges. Area up to 0.1 Sqm
1
127
127
... More
Providing and fixing unplasticised PVC connection pipe brass unions (Kohinoor) 90 cm length 15mm nominal bore
1
306
306
... More
Supplying and fixing 3mm thick MS sheet Gutter of over all 0.77m to 0.90m width including cutting, bending and fixing charges with necessary Zinc chromate yellow primer and etc complete.
1
4131
4131
... More
Supply and fixing of Aluminum custom perforated cladding panel to supporting framework made of powder coated extruded aluminum members of size 50 x 100 x 2mm Thk. The Screen panels of various sizes as per design requirement shall be manufactured from ALUMINIUM ALLOY 3105 Grade material in thickness of 3 mm. Combination of perforations to be provided to suite the architects approved design. The design perforated panels shall be coated with both sides with polyester powder coating for a minimum of 60 microns as per the approved color. The proposed size of SS Anchor Fastener is 10 x100mm which is used to fix the aluminum frame works to the Platform. All self-drilling screws bolts, nut and fixing accessories used should be of Stainless steel. The Overall system should pass a wind load pressure of 2KPA.
1
17268
17268
... More
Supplying and fixing sanitizer stand for the length of 1.12m height using 25mm square tube for vertical stand peice & 60x 60mm Square tube for bottle holder. Internaly connected with 10mm thread rod and aluminium stiffner 12mm Square rod top bottom using the hydraulic spring, ms flat of size 20 x 6mm base the rate inclusive of all materials, labour charges,etc.,
1
1329
1329
... More
Supplying and fixing water heater (geyser) 25 Lit capacity of Venus make and water purifier of 15 Lit capacity make of Kent fixing at GF Campus café. The rate is inclusive of materials, labours, transport charges etc complete as directed by Engineer in charge.
1
11026
11026
... More
Supplying and fixing water purifier-Kent Elegant Lite(11120) 15 L/hr at IITM Discovery campus. The rate is inclusive of materials, labours, transport charges etc complete as directed by Engineer in charge.
1
16096
16096
... More
Supplying and fixing door foot pull Aluminium section (Powder coating) size 100mm x 25mm x2.5mm tk with necessary screws at toilet/ bath/ main doors etc complete.
1
167
167
... More
Providing and fixing ISI : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete. 75mm
1
56
56
... More
Providing and fixing hands free foot plate with gripping pad SS 304 finishes (Dorma make) and other side to fix with elbow door opener, contour design suitable for 19mm dia handles Satin finish. The rate is inclusive of materials, installation and transport charges etc complete as per the directions of Engineer in charge. (For Toilet main doors)
1
2063
2063
... More
Providing and fixing post- adjustable tensioning bolt-SS bottle clamp for providing GI cable as per the drawing details and etc complete
1
2905
2905
... More
Supplying and fixing under deck insulation with 13 mm thick XLPE aluminium foils sheet with synthetic rubber adhesive and pvc ring for holding the insulation to the ceiling, seal the joint properly and including all required accessories complete as per manufacture's specifications as per direction of Engineer in Charge.
1
677
677
... More
FRP layer over the existing steel Gutter to avoid water leakage -The application involve thorough cleaning of the surface of mild steel gutter and apply chalk putty+catalyst mix together and apply over the blow holes. The fibre shall be cut (glass fibre 300 GSM) to match the existing gutter dimension and laid over the existing gutter. Over the fibre, GP -general purpose resin of ration 1 litter +catalyst 20%+ accelerator 25%+ pigment (color) shall be mixed together and applied the same in 4 layers. GP resin shall be applied on the gutter surface to get a overall minimum thickness of 3 to 4mm as per the shape of gutter. Final coats to apply the surface mat for avoid blow hole and pin holes. (Make Gp resin – DIAB brand)
1
4191
4191
... More
Supplying FIBERGLASS INSECT SCREEN with all fitting and fastening and fixing in position to the existing aluminum and woodern profile (Saint Gobain make) insect mesh with hook and loop, mesh made with fiber glass pvc coating and hook is (20x0.5cm ) washable type etc complete as per direction of Engineer in charge.
1
718
718
... More
Making Khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
1
265
265
... More
Operation and maintenance of watersupply and sewerage system
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder, washing soda solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all materials, labour, transportation, taxes and levies etc. At different levels and heights.
-
-
-
... More
Over head tanks of capacity 5 to 15 thousand litres each (in various buildings at various heights)
6
1648
9888
... More
Charges for operating the pumps from 0.5HP to 10HP installed at sumps / Open wells / deep Bore wells mains as and when required during day/night in various locations. (One pump operator should operate a minimum of 10 pumps at various location)
12
28252
339024
... More
Towards charges for suction, loading and transporting of sewage water through lorry from manholes / Septic tank for removal of blockages inside IITM Discovery campus and unloading at near by chamber or Sewage pump house(STP). At IITM Discovery Campus, Thaiyur, Chengalpattu Dist.
1
2962
2962
... More
Cleaning of Sewage Manhole chambers using Super Sucker Machine at IIT Madras - Towards charges for suction, loading and transporting of sewage water through lorry from manholes / Septic tank for removal of blockages inside IITMadras campus and unloading at near by chamber or Sewage pump house(STP).
1
10998
10998
... More
Supplying of potable drinking water through lorry tankers to IITM Discovery campus, Thaiyur, Chengalpattu Dist. The rate includes supplying and unloading in the chambers around the sumps at main Pump House and other locations inside IITM Discovery campus, Thaiyur, Chengalpattu Dist. The taste, quantity and colour of water of each and every tanker will be checked by IITM staff. Necessary delivery challans should got sealed at IN gate and signed by IITM staff. Payment will be made on accountability of delivery challans and quantity of water supplied.
200
100
20000
... More
Supplying ,fixing and testing of stainless steel Spray Nozzle and head for Fountain in Arrival court at IITM Discovery campus, Thaiyur, Chengalpattu Dist. Complete
1
276
276
... More
Labour charges towards cleaning of dry leaves and fallen tree branches, and removing vegetation etc., for free flow of runoff through storm water drain and culverts inside IITM campus. The average width is around 3m. The dry leaves removed shall be disposed off into the forest area upto 100m lead and minimum 10m away from the storm water drain. It should not be stacked near to the building, road and other service facilities. The rate quoted shall be inclusive of all tools & tackles and Personnel protective equipmets, etc.
1000
8
8000
... More
Charges towards desilting of storm water channel by necessary earthwork and disposal of collected silt/earth inside the campus using lorry/truck as directed by Engineer-in-charge. The payment will be made based on actual volume of silt/earth disposed and 20% voids will be deducted from actual measurement
2
1258
2516
... More
Intercarting of excavated earth by mechanical tranpost including loading, unloading and stacking/ spreading/ levelling lead upto 2.5km beyond the initial lead of 50m. Voids will be deducted at 20%.
5
249
1245
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements