Indian Institute Of Technology Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Jul 2024
Closing Date20 Aug 2024
Tender Amount₹ 56,73,00,000
Costs
EMD
₹ 66,73,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IITM_203148_1Tender No
20/2024-25/CompositeTender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://https://www.iitm.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge
-
-
-
Ordinary rock
367
-
-
Hard rock (blasting prohibited)
100
-
-
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil
-
-
-
Pipes, cables etc, not exceeding 80 mm dia
150
-
-
Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
150
-
-
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
150
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
8396
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.
-
-
-
All kinds of soil
1286
-
-
Ordinary or hard rock
467
-
-
Supplying and filling in plinth with sand under floors, including watering,ramming , consolidating and dressing complete
294
-
-
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared
7875
-
-
Intercarting of excavated earth by mechanical transport including loading, unloading and stacking / spreading / leveling lead up to 2.5km km beyond the initial lead of 50m. Voids will be deducted at 20%.
8700
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.G. 20% with 1% concentration
1330
-
-
DISMANTLING OF EXISTING BLOCKS - MSQ 1 and SSQ 1 Building - Amount payable to IITM towards Dismantling, Demolishing by manually/ by mechanical means for RCC & PCC Work, stone & brick masonry, cutting reinforcement bars, Dismantling doors, windows and clerestory windows , shutter including chowkhats, architrave, holdfasts, Dismantling aluminum windows, plumbing lines, soil lines, water tanks, electrical wiring, fittings, etc complete including disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Contractor shall consider the salvage value of building rubbish, wood work for doors, Aluminum windows while quoting the rate etc. The quoted rate is inclusive of removal of foundation, super structure and cleaning up to existing foundation PCC Level complete and making the site ready for construction of proposed building.
1
-
-
CONCRETE WORK "CAST IN SITU"
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
111
-
-
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
67
-
-
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources)
42
-
-
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
42
-
-
REINFORCED CEMENT CONCRETE
-
-
-
FORM WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
288
-
-
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
2696
-
-
Suspended floors, roofs, landings, balconies and access platform.
11131
-
-
Shelves (Cast in situ)
100
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
12055
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
7970
-
-
Stairs, (excluding landings) except spiral-staircases
490
-
-
Edges of slabs and breaks in floors and walls - Under 20 cm wide
555
-
-
Weather shade, Chajjas, corbels etc., including edges
37
-
-
STEEL REINFORCEMENT
-
-
-
Steel Reinforcement for R.C.C. work including straightening ,cutting, bending, placing in position and binding all complete up to plinth level. - Thermo-Mechanically Treated bars of grade Fe 500D or more
308368
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level at all levels up to terrace water tank - Thermo-Mechanically Treated bars of grade Fe 500D or more
645602
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
782
-
-
DESIGN MIX CONCRETE
-
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level - Concrete of M35 grade with minimum cement content of 380 kg /cum
2056
-
-
Above plinth level at all levels up to terrace water tank - Concrete of M35 grade with minimum cement content of 380 kg /cum
4304
-
-
Add for using extra cement in the items of design mix over and above the specified cement content therein.
127
-
-
BRICK WORK
-
-
-
Brick work with Fly ash concrete bricks (non modular) of class designation M10 (10 Kg/Cm2) in foundation - Cement mortar 1:6 (1 Cement : 6 coarse sand / M Sand)
55
-
-
Brick work with Fly ash concrete bricks (non modular) of class designation M10 (10 Kg/Cm2) - Cement mortar 1:4 (1cement :4 coarse sand / M sand) Above plinth level upto terrace water tank top
2734
-
-
Half Brick masonry with fly ash concrete bricks of class M10 (10 Kg/Cm2) designation M10 in Cement mortar 1:4 (1 Cement : 4 Coarse sand / M sand) - Above plinth level upto terrace water tank top - Rate quoted is including providing 2 nos of 6mm dia at every 3rd brick layer
4760
-
-
FAÇADE WORK MARBLE & GRANITE WORK
-
-
-
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in OUTER BORDER THICKNESS (50-60mm), approved size, pattern, design and color . The Screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘Saint Gobain’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ . The material casting should take place in Synthetic Rubber / FRP Mould manufactured by ‘Reckli’. Framework for fixing shall be paid separately. The contractor shall submit samples, shop drawings for GRC Screens for approval before execution.
1919
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour
-
-
-
Area of slab up to 0.50 sqm
86
-
-
Area of slab over 0.50 sqm
586
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities, etc. including machine polishing to edge to give high gloss finish, etc. complete as per design approved by Engineer-in-Charge. - Granite work
3625
-
-
Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc including moulding, rubbing and polishing of cut edges etc complete.
6000
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
8142
-
-
WOOD AND P. V. C. WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
22
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) - Second class teak wood - 35 mm thick shutters
210
-
-
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching UPVC BEADING
210
-
-
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture in UPVC windows or similar locatoions
1747
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: - 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
725
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge - (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) - 30 mm thick
473
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. including M.S hold fast/ lugs or SS dash fasteners Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. - Frame size 50 x 100 mm
1485
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. - (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) - 18 mm thick
650
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) - 12 mm thick
1931
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. - 1.0 mm thick.
1819
-
-
Supplying and fixing of Cuddapah slab of 30-40 mm thick(Both side Polishing) insert the cupboards with proper cement morter pointing etc.,complete. As per the direction of Engineer-In-Charge
1083
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.
100
-
-
Providing and fixing factory made uPVC glazed/wire mess windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for series R1 & R2 profiles and 2.10 mm for series R 3 & R4 confirming to EN: 12608 in any shape colour and disign duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline osash adapter (wherever required) of appropriate dimension, EPDM gasket, hardware SS 304 fasteners of minimum 8mm dia with countersunk head comprising of matching ployamide PA6 grade sleeve for fixing frame to finished wall, as per ISI 1367: part 1 to 14 plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash, mullion (if required) shall be mitred cut and fusion welded including drilling of holes for fixing hardware's and drainage of wter etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of equired size and of approved quality, all complete as per approved drawing confirming to CPWD specification and direction of Engineer-in-Charge. section of steel reinforcement and coress section of uPVC profiles to be as per design approved by Engineer-in-Charge. wire mess/Glazing/double glass unit with /without high performance cotings as per design requirements and confirming to IS : 3548 and IS: 16231 is included in the price quoted by the contractor. Note: stractural design proof checked from a Government Engineering Intitute to be provided by the manufacturer for (i) Sites with basic wind speed 45 m/sec as per IS 875 - Part -3 (ii) Sites with structure height more than 20 m for all wind speed.
-
-
-
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. - Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system,
505
-
-
Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m).
513
-
-
Fixed window / ventilator with mullion / transom. - Using R3 series with frame (55mm & above ) x (45mm & above) & mullion (55mm & above) x (65mm & above)
540
-
-
Ventilator Casement window single panel with or without fixed panel with S S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. - Using R3 series with frame (55mm & above ) x (45mm & above) & sash /mullion (55mm & above) x (65mm & above)
168
-
-
Casement Window with Double Rebate Frame with two Side Hung Glazed Panel on outside and two Side Hung wire mesh Panel on inside and French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles with shoot bolt on both glazed and fly screen panel. - Using R3 series with frame (110mm & above ) x (45mm & above) & glazed sash (55mm & above) x (65mm & above) & fly screen sash (30mm & above) x (55mm & above) & French (False) mullion (55mm & above) x (60mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 meter)
479
-
-
Providing and fixing following type of glass in aluminium/upvc/wooden doors and windows complete in all respect to the satisfaction of engineer incharge. Item is inclusive of any beading strip and other fixing arrangement. Clear area of glass visible shall be measured for payment. Double Glazed Unit (outer: 6mm toughened with coating Face 2 - 12mm Air Gap - inner 6mm Clear Toughened) having light tansmission factor of 47%, external reflection-16, internal reflection-18, Solar Factor-0.22, U Value-1.5w/sqmt.-k. and shading co-efficient 0.25
1038
-
-
Providing and fixing M.S. grills of required pattern in frames of windows, Masonry openings, UPVC windows etc with MS flats, square and round bars etc., as per the design pattern approved by Engineer-in-Charge. Over-lapping of the rods is not allowed.
18291
-
-
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevant Item*). - (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by the technical sanctioning authority as per the site requirement.
200
-
-
Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in UPVC Doors windowas and ventilators
513
-
-
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. - 200 mm
1000
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. - 125 mm
2600
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
100
-
-
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50 mm
500
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : - 125x64x2.50 mm
400
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : - 125x64x1.90 mm
-
-
-
125x64x1.90 mm
1600
-
-
75x47x1.80 mm
1200
-
-
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydrarlic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
2700
-
-
Providing and fixing Stainless steel 304 grade tower bolt with necessory screws etc. complete
-
-
-
300mm
800
-
-
150mm
800
-
-
Providing and fixing Stainless steel 304 grade sliding boltt with necessory screws etc. complete 300mmx 16mm
100
-
-
Providing and fixing Stainless steel 304 grade twin rubber door stopper with necessory screws etc. complete
500
-
-
120Mins Fire Steel Door with Dorma Hardware (door of any size- double or single leaf): with vision panel and hardware items.
Providing and fixing of Hollow metal fire rated doors as per BS 476 part-22 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry ratio 1:2 necessary for fire doors on the clear masonry opening.
-
-
-
Door leaf shall be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be of size 200x300mm with a beeding and screws from inside. The glass should be 6mm clear borosilicate fire rated glass of relavant rating of the door.
All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt sprey test. 1. Dorma SS - Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SS -Size : 4"x3"x3mm.
2. Dorma SSS - Surface door closer TS68, size EN2,3,4, with standard arm, Silver finish
3. DORMA -Single point surface panic latch PHA 2000, Silver finish
4. PHT 3905 external trim with lock 5. DORMA -Euro profile cylinder 42mm with keys -SS304 finish
6. Clear fire rated glass, 6mm, 120min, of size 200 x 300mm - Schott Pyran S.
7. Gasket, Fire rated 4mm Thick x 13mm, Black
242
-
-
STEEL WORK
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
9000
-
-
Providing and fixing 8mm tk acrylic clear sheet with necessary buffing if needed to be fixed as panel for Aluminium doors or windows etc. complete as per the direction of Engineer in charge. The joints shall be treated with aluminum profile, rubber beadings and silicon sealants every joints with necessary screws including self tapping screws for sheet fixing and etc complete as per the manufacturers specifications. The rate inclusive of labours material for jointing between each sheet etc complete at all levels.
90
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. - 80x1.25 mm M.S. laths with 1.25 mm thick top cover
40
-
-
Providing and fixing ball bearing for rolling shutters.
4
-
-
Extra for providing mechanical device chain and crank operation for operating rolling shutters. - Exceeding 10 Sqm in the area
40
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
360
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
200
-
-
In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
1000
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
3716
-
-
FLOORING
-
-
-
Providing and laying polishing Granite stone flooring in required design and patterns, in lineer as well as curvilineer portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 Cement : 4 Coarse Sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. - All colours and shades
2119
-
-
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 Cement: 4 coarse sand) 25mm thick
1142
-
-
Providing and laying Vitrified tiles in floor and in skrting upto 150mm height in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. The skirting provided on walls shall be flushed with wall surface - Double charge vitrified tile polished finish of size of Tile 600 x 600 mm
5508
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily - Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 600 mm
1499
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge. - All sizes
1499
-
-
Making 2 numbers of 3mm deep Non Slippery grooves staircase granite and complete as per direction of Engineer-in-Charge.
1597
-
-
Supplying and laying vermiculate (light weight aggregate) concrete with a ratio of 1:4 (1 cement :4 helite aggregate ) /ready made EPS based cement concrete of grade M3 or above including compacting and laying. The rate inclusive of labour charges for mixing, laying etc complete.
125
-
-
FINISHING
-
-
-
Cement Plaster (in coarse sand)
-
-
-
12 mm cement plaster of mix : - 1:4 (1 cement: 4 coarse sand)
367
-
-
15 mm cement plaster on rough side of single or half brick wall of mix - 1:4 (1 cement: 4 coarse sand)
19632
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.
16308
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
22667
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
16185
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
16185
-
-
Interior painting - two or more coats over a primer coat Applying interior paint of approved colour, make, brand and product at the approved rate of surface coverage of painting . The interior paint shall be applied over dry surface with a coat of approved interior primer before application of top coat of exterior paint. The work shall be executed as per the detailed specifications and special conditions mentioned in the Painting Annexure. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
44208
-
-
Exterior painting - two or more coats over a primer coat Applying interior paint of approved colour, make, brand and product at the approved rate of surface coverage of painting . The interior paint shall be applied over dry surface with a coat of approved interior primer before application of top coat of exterior paint. The work shall be executed as per the detailed specifications and special conditions mentioned in the Painting Annexure. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
16308
-
-
Enamel painting for doors / windows / wall panels (two or more coats including a coat of primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats over a coat of primer as per Painting Annexure. The work shall be executed as per the detailed specifications and special conditions mentioned in the Painting Annexure. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
5899
-
-
PU Enamel painting for doors / windows / wall panels (two or more coats including a coat of primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel as per Painting Annexure. The work shall be executed as per the detailed specifications and special conditions mentioned in the Painting Annexure. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
500
-
-
Painting using water based enamel paint: two or more coats over a primer coat - Applying water based enamel paint of approved colour, make, brand and product at the approved rate of surface coverage of painting as per painting anneuxre Annexure. he work shall be executed as per the detailed specifications and special conditions mentioned in the Painting Annexure. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
500
-
-
ROAD WORK
-
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
60
-
-
Supplying and fixing of LDPE sheet of 400 microns thick in double skin for bottom the concrete surfaces and etc complete as per the direction of Engineer Incharge.
1330
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for rRoad / Parking area work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. - Concrete of M35 grade with minimum cement content of 380 kg /cum
266
-
-
Supplying and mixing FIBRIN XT (POLYPROPYLENE STABLE FIBRE) of approved L/D ratio and dia for road concrete. (Make reliance or equivalent make)
1330
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
19
-
-
Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at
OMC, carriage of mixed material by tippers to work site, for all leads
& lifts, spreading in uniform layers of specified thickness with motor
grader on prepared surface and compacting with vibratory power roller
to achieve the desired density, complete as per specifications and
directions of Engineer-in-Charge. - With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
890
-
-
Providing, laying, spreading and compacting graded stone aggregate
(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)
specification including premixing the material with water at OMC in
for all leads & lifts, laying in uniform layers with mechanical
paverfinisher in sub- base / base course on well prepared surface
and compacting with vibratory roller of 8 to 10 tonne capacity to
achievethe desired density, complete as per specifications and
directions of Engineer-in-Charge.
716
-
-
Providing and laying factory made chamfered edge Cement Concrete
paver blocks in footpath, parks, lawns, drive ways or light traffic
parking etc, of required strength, thickness & size/ shape, made by
table vibratory method using PU mould, laid in required colour &
pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand
bedding layer through vibratory compaction by using plate vibrator,
filling the joints with sand and cutting of paver blocks as per required
size and pattern, finishing and sweeping extra sand. complete all as
per direction of Engineer-in-Charge. - 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
2110
-
-
Providing and fixing factory made precast Fibre glass composite storm water perforated (Slot hole size of 20mm) drain cover heavy duty (20T) without cover frame of thickness 50mm and size-as per site condition etc stacking and fixing the grating cover upto a lead of 200 to 300m complete etc. and as per the diretion of the Engineer-in-Charge.
Material:
Resin : Unsaturated Polyster Resin UV Resistant ISO grade
Reinforcement : E Glass Fiber CSM and WRM glass fiber
Colour : UV Resistant Pigment needs to used for colouring. : Granite finish or any colour as per IITM. Provision for IITM logo
Standard : As per BSEN124 : 2015
36
-
-
ALUMINIUM WORKS
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) - Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
-
-
-
For fixed portion
1188
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required
731
-
-
Providing and fixing aluminium work for fixing GRC/WPC/ALUMINIUM metal mesh Screens and aluminium louvers/ bands/aluminium grill as per detail drawings with extruded built up standard tubular sections/ appropriate Z/T/C sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. The contractor shall submitt detailed shop drawings for fixing for approval before execution of work. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
25225
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
2103
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing.
-
-
-
The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
20
-
-
WATER PROOFING
-
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
Polymer modified mortar:- Resurfacing of the substrate with SBR of FABCHEM,Nitrobond SBR of FOSROC. Polymer modified cement mortar (Cement:sand ratio: 1:3 WITH A WATER (Mixed with SBR cement ratio of 0.4-0.45),with minimum thickness of 20mm,to get a levelled surface .The dosage of SBR will be 4 kgs bag of cement.The rate should be inclusive of bonding coat with cement and latex mix ratio 1:1 over the cleaned surface before application of mortar. A through surface cleaning must be carried out with wire brush to remove micro particles,loose skins,funguses and clean the surface with air blower to make sure that no such particles and contamintes are on the surface where the system to be applied.
-
-
-
Over the Plastered surface supplying and applying MIXGUARD HR 5 of FOSROC, applied elastomeric water proof membrane over the prepared surface,prepare a base surface stabilizing Primer of MIXPRIME AC100@2:1:3 (MIXPERIME AC 100 : WATER : OPC CEMENT) with slow speed drilling machine with suiutable mixing pad to get a homogeneous mix and apply directly @1KG/SQM along with MIXMAT GFM-50/70 at an 75mm minimum overlapping which can be extended upto 100mm depends upon the surface condition.
-
-
-
After a curing period of 3-4 Hours prepare and apply MIXPERIME AC @Over at a Consumption of 250ML/SQM.After Curing 3-4 Hours apply a coat of MIXGAURD HR - intermediate elastometric water proof membrane at consumption of 0.5KG/SQM.After a curing time of 4-5 Hours apply MIXGAURD HRXtra - Micro fibre reinforced high tensile heat reflective top coat at Consumption of 0.5KG/SQM. After Complete a curing period of minimum 72 hours time for complete system.Mix guard HR5 system components are cold applied and can be applied by brush,roller or airless spray at all floors as per direction of Engineer Incharge.
-
-
-
Finish the surface with SBR of FABCHEM,Nitrobond SBR of FOSROC. Polymer modified cement mortar (Cement:sand ratio: 1:3 WITH A WATER (Mixed with SBR cement ratio of 0.4-0.45),with minimum thickness of 20mm,to get a levelled surface .The dosage of SBR will be 4 kgs bag of cement.
1760
-
-
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure, such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.
138
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 30 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone
95
-
-
Roof treatment - : Providing and laying PU membrane (moist cured) over the existing terrace including providing Khura and Gola, laying the heat reflective tile over the membrane etc., complete. The work should be carried out involving the following items, sequences and specifications. a) Polymer modified mortar :- Resurfacing of the substrate with Sika Latex (or MIXBOND SBR of FABCHEM, Rheomix 141 of BASF or Nitobond SBR of FOSROC) polymer modified cement mortar (Cement: sand ratio : 1:3 with a Water (Mixed with Sika Latex) cement ratio of 0.4-0.45), with a minimum thickness of 20 mm, to get a levelled surface. The dosage of Sika Latex will be 4 kgs per bag of cement. The rate should be inclusive of bonding coat with cement and latex mix of ratio 1:1 over the cleaned surface before application of mortar. b)Treatment to rain water mouth / Khura- making opening for fixing the rain water pipe with a diameter of the opening should be more than 25cm around the rain water pipe to be fixed.
-
-
-
The new rain water pipe to be fixed to the opening after installing swellable acrylic based PU water bar around the pipe, fixing the rain water pipe to the opening made and filling the gap between the rain water pipe and the opening with non shrink grout without any gap, applying a layer of cementitious water proof coating over the rainwater floor mouth (The rate also inclusive of applying a layer of cementitious coating Cement : SBR 1:1 ratio over the wall floor junction before applying coving) and finishing the surface neatly.
-
-
-
c) Providing gola / coving 75x75 mm in cement concrete 1:2:4 admixed with 4 Ltr of SBR latex for 50 kg of cement (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 admixed with 4 Ltr of SBR with 50 kg of cement (1 cement : 3 fine sand) as per standard design. The rate also inclusive of applying a layer of cementitious coating Cement : SBR 1:1 ratio over the wall floor junction before applying coving. d) Supply and applying PU moist cured- Supplying and laying single component PU system using spray application only with MC-HYPERDESMO or equivalent product of SIKA / BASF/ ASIAN PAINT / FOSROC is a one component polyurethane fluid which cures with the humidity in the atmosphere. It produces a highly elastic membrane with strong adhesion to many types of surfaces. It is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic
-
-
-
fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties. Apply with airless spraying in two, at least, coats with minimum total consumption of 1.5-1.8 kg/m2 or as specified by the manufacturer. The rate inclusive of necessary surface preparation to receive the waterproofing coating etc., complete.
e)Ponding test by storing water for a minimum depth of 20 cm and the water to be retained for not less than 48 hours or as required by engineer in charge to ascertain any leakage. Necessary repair / grouting to be done free cost to arrest any leakage observed.
f)Geotextile:- Supply and apply a polyester based geotextile protection fleece. Product: Sarnafelt® 300 or equivalent approved by IITM. Product requirements: density ≥ 300 g/m2; thickness 2.4 mm; tensile strength ≥ 430 N/50mm; elongation at break ≤ 100 %; tear strength ≥ 250 N; puncture resistance ≥ 1600 N; cone drop: 13 mm.
-
-
-
g)Providing and laying light weight concrete of grade not less than M2.5 using expandable polystyrene aggregate to maintaining adequate of density 800-900 kg/ cum and same shall be laid to maintain slope to drain the rain water over the geotextile (not less than 1 in 80). The minimum cement contnent shall not less than 250 Kg/cum. The mix design shall be approved by the engineer incharge. Minimum thickness of the concrete shall be 75cm.
h)Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 9.5 mm) manufactured by ABC or equivalent with SRI (solar refractive index) 78, solar reflection 0.70 and emittance 0.75 on 30 mm thick cool mortar as per manufacturer specification on sloped surface of terrace, laid on water resistant cement slurry prepared in the ratio of 1:3 ( 1 cement and 3 abc plus powder and add 3% Nano Acryl by volume) and grouting the joints (3mm) with abc Grout and PPF (Poly Propylene Fiber) in the ratio of 2 to 3 gm PPF per kg of abc Grout including wetting (by using a piece of sponge) the grouted surface by abc Nano Clear in the ratio of 100 ml in two liter water. , including providing skirting upto 300 mm height along the parapet wall in the same manner.
1171
-
-
PUBLIC HEALTH WORKS
-
-
-
SANITARY INSTALLATIONS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast P or S trap, 10 Litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device(handle lever) conforming to IS:7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required. - White vitreous chinaOrissa pattern W.C. pan of size 580x480mm with integral type foot rests.
100
-
-
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
100
-
-
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : - Flat back wash basin of size 550x400 mm
300
-
-
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. - Kitchen sink with drain board - 510 X 1040 mm bowl depth 225mm
100
-
-
Providing and fixing S.S. health faucet with flexible tube upto
1 metre complete in all respect of superior quality and make as approved by Engineer - in - charge.
200
-
-
Providing and fixing C.P.brass bottle trap 32mm size bottle trap of approved quality & make as approved by Engineer-in-charge.
300
-
-
Providing and fixing C.P.brass Single lever telephonic wall mixer of approved quality & make as approved by Engineer-in-charge. - 15 mm nominal bore.
200
-
-
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete . - Semi rigid pipe - 40 mm dia
100
-
-
Providing and fixing quarter turn single lever basin mixture complete in all respect .
300
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing. - Rectangular shape 1500 X 450 mm
300
-
-
Providing and fixing 600x120x5mm glass shelf with edges round off,supported on anodised aluminium angle frame with CP brass brackets and guard rail complete with 40mm long screws,rawl pugs etc. complete.
300
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour. 750x20mm size. - 600mm long towel rail with total length of 645mm,width 78mm & effective height of 88mm,weighing not less than 190gms.
300
-
-
Providing and fixing brass bib cock of approved quality. - 15 mm nominal bore.
200
-
-
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms. - 15 mm nominal bore.
300
-
-
Providing & fixing Sink Mixer with Swinging Casted Spout with 450mm long copper pipes & brass nuts.
100
-
-
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowls, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
-
-
-
110mm outer dia
1800
-
-
75mm outer dia
1800
-
-
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.
-
-
-
40mm outer dia
500
-
-
50mm outer dia
1000
-
-
63mm outer dia
200
-
-
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. - 100 mm inlet and 75 mm outlet. (with 102 mm dia CP Glossy Grating Jayna model no. RRB 102)
500
-
-
Providing & fixing 110m x 50mm waste with PVC reducer including cutting chases in floor, cutting RCC slab complete as required.
300
-
-
WATER SUPPLY
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - Internal Work - Exposed on Wall
-
-
-
20 mm nominal outer dia pipes.
200
-
-
25 mm nominal outer dia pipes.
200
-
-
32 mm nominal outer dia pipes.
200
-
-
40 mm nominal outer dia pipes.
200
-
-
50 mm nominal outer dia pipes.
200
-
-
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. - Concealed work including cutting chases and making good the walls etc.
-
-
-
20 mm nominal outer dia pipes.
3000
-
-
25 mm nominal outer dia pipes.
500
-
-
32 mm nominal outer dia pipes.
200
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching,refilling and testing of joints complete as per direction of engineer in charge. - External Work
-
-
-
25 mm nominal outer dia pipes.
300
-
-
32 mm nominal outer dia pipes.
100
-
-
40 mm nominal outer dia pipes.
2900
-
-
50 mm nominal outer dia pipes.
200
-
-
65 mm nominal outer dia pipes.
100
-
-
Providing and fixing brass stop cock of approved quality.
-
-
-
15 mm nominal bore
8
-
-
20 mm nominal bore
8
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end).
-
-
-
20 mm dia nominal bore
400
-
-
25 mm dia nominal bore
5
-
-
32 mm dia nominal bore
80
-
-
40 mm dia nominal bore
5
-
-
50 mm dia nominal bore
5
-
-
Providing and fixing P.V.C connection with brass union. 45cm length. - 15mm nominal bore
600
-
-
Providing and fixing CP brass shower rose with 15mm or 20mm dia inlet. - 150 mm dia
200
-
-
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931. - 15 mm nominal bore
1100
-
-
Supplying and fixing GI base clamp of all size (galvanised) for laying/ fixing pipe lines of various diameter on walls, the rate inclusive of necessary U-clamp for fixing pipes, acnchour fastner for fixing the clamp etc complete. The measurement will be made based on the actual weight of the clamp and necessary bolt.
2800
-
-
DRAINAGE
-
-
-
Providing & fixing on wall face unplasticised -Ragid PVC rain water pipes conforming to IS ; 13592 Tyape A included jointing with seal ring conforning to IS ; 5382 leaving 10 mm gap for thermal expansion. - 110 mm diameter
850
-
-
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Coupler - 75mm
360
-
-
Coupler - 110mm
440
-
-
Single Tee with door - 75X 75X 75mm
300
-
-
Single Tee with door - 110X110X110mm
300
-
-
Bend 87.5 - 75mm
40
-
-
Bend 87.5 - 110mm
80
-
-
Shoe (Plain) - 75mm
40
-
-
Shoe (Plain) - 110mm
80
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
20
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls , floors with cement concrete 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) cement plastered on both sides with cement motor 1:3 ( 1 cement :3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : - For pipes upto 250 mm diameter
20
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design - 150 x 100 mm size P type - With sewer bricks conforming to IS : 4885
60
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement
: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885
20
-
-
Extra for depth for manholes - Size 120x90 cm - with Sewer bricks conforming to IS : 4885
20
-
-
Supply, Installation, Integration, Testing and Commissioning of automated consolidated LoRaWAN based Ultrasonic Smart Water Flow Meters with Data Management System and Operation & Maintenance of software for a period of one year, To measure and monitor the water consumption at IIT Madras Campus. Make: Adept Fluidyne Pvt. Ltd. / Model No: DWM 0040G5S1A2S2 / Ingress protection code: IP68 V1:0 / Communication Port : LoRaWANDN40 /Accuracy : Class-II / Software : Smartlit / Software License : FG00043 / Service : Domestic Water. The cost of work inclusive of dismantling and removing the existing delivery flow pipelines, Providing and fixing the new CPVC specials, Fabricating the water meters with CPVC specials, Supply and fixing of customized GFRP protection enclosure of exterior finish unmarked blue colour for DWM:40 with SS:304-Grade fastners, Skilled Technician & Labor Charges, Transport Charges, Contractor's profit & overheads, Goods and Services Tax ,etc. complete
200
-
-
INTERNAL ELECTRICAL WORKS
-
-
-
Point wiring in PVC conduit, with modular type switch :-
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
2442
-
-
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group B
316
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
584
-
-
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-
-
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
24800
-
-
Circuit / Sub main wiring in PVC conduit :-
-
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
10600
-
-
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire.
7560
-
-
4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire.
3180
-
-
S/F light plug point Modular Type Accessories :-
-
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
1200
-
-
S/F power plug point modular Type Accessories :-
-
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
992
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (AC)
300
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
100
-
-
DISTRIBUTION BOARDS & MCB's
-
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. Single pole
2552
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
104
-
-
Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 12 Way Double door.
2
-
-
Supplying and fixing following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
-
-
-
6 Way (4 + 18), Double Door
2
-
-
8 Way (4 + 24), Double Door
104
-
-
S/F DP MCB Isolator
-
-
-
Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
2
-
-
S/F 4P MCB Isolator
-
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 63 Amps
106
-
-
TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only)
-
-
-
S/F MODULAR BOXES, BASE & COVER PLATE :-
-
-
-
Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required.. 1 or 2 Module (75 mm x 75 mm)
600
-
-
S/F MODULAR TYPE SWITCH / SOCKET :-
-
-
-
Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required.
-
-
-
Telephone Socket outlet.
300
-
-
TV Antenna socket outlet.
300
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm.
8400
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
6000
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
4500
-
-
INTERNAL LIGHTING FIXTURES & FANS
-
-
-
Supply, Installing, Testing and commissioning Surface Mounted Energy Efficient, LED Luminaires 18W/ 20W LED DOWN LIGHT (Round), 6500k Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required
308
-
-
Supply, Installing, Testing and commissioning LED Luminaires Batten 20W LED Tube Light 6500k of surface mounting Aluminium housing and integrated electronic driver Complete as Required.
606
-
-
Supply Installation, Testing and commissioning of 9W LED BULB Suitable for B22 Base accessories Complete as required.
500
-
-
Supply, Installing, Testing and commissioning PDC housing 10W LED bulkhead luminiaries with Opal difusser, Equipped with protection with IP65 protection rating etc. Complete as required.
44
-
-
Supply, Installing, Testing and commissioning Surface Mounted Energy Efficient, LED Luminaires 12W LED Down Light (Round), 6500k Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required.
192
-
-
Supply, Installing, Testing and commissioning LED Luminaires Batten 10W LED Tube Light 6500k of surface mounting Aluminium housing and integrated electronic driver Complete as Required. (Mirror Light)
500
-
-
Supply, Installing, Testing and commissioning Following sweep Exhaust fan with guard suitable operation on single phase 230 V, 50Hz. AC Supply, with louvers/shutters in the existing opening etc. Complete as required .
-
-
-
250 mm sweep 900 rpm (Make of ORIENT ELECTRIC 250mm Ventilator Ivory/ Similar to Crompton Ventilus 10" White/ Similar to Havells Ventil Air DX/ DX-HS/ Similar to USHA)
200
-
-
300 mm sweep 900 rpm (Make of ORIENT ELECTRIC Heavy duty Exh. Gray / Similar to Crompton EXHD300-6-1 / Similar to Havells Turbo force SP/ Similar to USHA)
100
-
-
ERECTION OF LIGHTING FIXTURES AND FANS
-
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
600
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
500
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
500
-
-
EXTERNAL ELECTRICAL WORKS
-
-
-
11KV SINGLE VCB (For Existing ESS Expendable HT Panel)
-
-
-
Indoor Type - 630A, 11kV, 350MVA for 3 Sec., TP, Horizontally isolated, horizontally drawout type, motorised spring charged, closing mechanism, motor voltage 230V AC, shunt tripping & Closing coil Voltage 24V DC, Electrically Operated, Trip Free, Dust & Vermin Proof, Vacuum Circuit Breaker (VCB) With Mechanical & Electrical OFF/ON Indicators & Provided with Following - 1 No. CT chamber with double wound single phase, cast resin CT, 15VA burden with core-1 for metering (CL-1) and core-2 for protection (CL-5P10) and of 60_/5/5A ratio - 3 Nos.
IDMT relay with 3 elements for over current (50-200%) and 1 element for earth fault protection(10-40%). - 1 Set
Anti Pumping Relay - 1 Set
Master Trip Relay - 1 Set
Trip circuit supervision relay - 1 Set
Potential Transformers, 3 Phase, 3 Limb, Drawout Type, Resin Cast 11000/(Root 3)/110/(Root 3) Ratio Class 1 Accuracy, 100 VA Burden, with HV fuse on primary side and MCB / MPCB on secondary side. - 1 Set 6 Windows Annunciator with Hooter - 1 Set
1 Window for over current trip - 1 Set
1 Window for earth fault trip - 1 Set
1 Window for master trip relay - 1 Set
1 Window for Emergency Stop Push Button - 1 Set
2 Windows Spare - 1 Set
Digital Ammeter with inbuilt selector switch - 1 Set
Digital Voltmeter with inbuilt selector switch - 1 Set
-
-
-
A set of breaker ON/OFF/Trip/DC control supply healthy/Trip circuit healthy/ Spring Charged VCB in test / VCB in service & R,Y,B phase indication lamps. - 1 Set
Emergency stop push button - 1 Set
Limit switches with 6 NO/ 6 NC breaker auxiliary contacts - 1 Set Control:- T-N-C (Trip, Neutral, Close) breaker control switch with indication arrangement. - 1 Set
All control wiring with protection & test terminal block as required. - 1 Set
Space heater with thermostat for moisture absorption. - 1 Set
Suitable for connection to 3C x 240 sq.mm. Cross linked polythelene(XLPE) 11kV cables or as called for. - 1 Set
Cable box for 3C x 240 sq.mm 11kV XLPE Al. conductor cable. - 1 Set
HT Danger Plate - 2 Set Incoming as described above. 1 Sets
Powerpack as Required to Be Included (220V/24V DC), 7AH Battery for Each Breaker Module.
-
-
-
TOTAL FOR 1 PANEL 11KV HT BOARD
1
-
-
11KV FOUR PANEL HT BOARD
-
-
-
11KV HT PANEL: CONSISTING OF FOUR VCB BREAKERS
-
-
-
Supplying, Installation, Testing and Commissioning of Two Incoming & Two Outgoing, Indoor Type, 630 A, 11KV, 3 Phase, 50 Hz, Earthed, 350 MVA Fault level Vacuum Circuit Breaker Motor Operated, Expendable Type as Per IS: 13118, IEC-56, Totally Steel Sheet Enclosed, Fully Interlocked, Indoor Industrial Pattern, Metal Clad, Horizontal Drawout, Floor Mounting, Earthed Bus Bar, Al. Bus Bar with Heat Shrink Sleeve & Cable Gland of Suitable Size. INCOMER : - 2 Nos Each Equipped With the following :
Vacuum Circuit Breaker
11KV 630A 3P 350MVA, 21KA for 3 sec
Current Transfomer-
CR CT 11KV 100/50/5A 30VA Core-1 CL:0.5, Core-2 CL :5P10
Potential Transformer-
CR CT 11/1.732KV / 110/1.732V , 50VA , Core-1 CL:0.5 & Core-2 CL:3P , 50HZ, With All Accessories.
Relays-
Numerical Relay & Static Relay
IDMT 3 O/C + 1 E/F RELAY
Over Current Relay (51)
Earth Fault Relay (51N)
Over Current Relay Instantaneous (50)
Earth Fault Relay Instantaneous (50N)
Over Voltage Relay
Under Voltage Relay
Master Trip Relay
Testing of Circuit Breakers CTs,PTs & Relay in Both I/C & O/G Relay to be updated by Logic
-
-
-
METERS-
Note : All Meter Should be Well Calibrated With Relevant Calibration Certificates
Digital Ammeter with Selector Switch Digital Voltmeter with Selector Switch
Multi Function Digital Meter
Set of indication Lamps-
Red-ON
Green-OFF
White-Trip Circuit Healthy
Amber-Trip Condition
Set of wiring, Ferrules & Fuses Power-Pack 230/24V DC Supply for simultaneous tripping of three breakers.
BUSBAR- 11KV 630A Copper Busbars with heat shrinkable insulation sleeves (Shrouds at joint of Busbar)
-
-
-
OUTGOING :- 2 Nos Each Equipped with the Following:
Vacuum Circuit Breaker 11KV 630A 3P 350MVA 21 KA for 3 sec
Current Transfomer-
CR CT 11KV 100/50/5A 30VA Core-1 CL:0.5, Core-2 CL:5P10
Relays-
Numerical Relay & Static Relay
IDMT 3 O/C + 1 E/F RELAY
Over Voltage Relay
Under Voltage Relay
Master trip relay
Testing of Circuit Breakers CTs,PTs & Relay in Both I/C & O/G Relay to be updated by Logic
Thermal over load realy (49)
Phase Blancing realy ( 46)
Restricted earth fault realy
METERS-
Note : All Meter Should be Well calibrated with relevant calibration certificates
Digital Ammeter with selector switch
Digital Entergy meter
Multi Function Digital Meter
Set of indication Lamp-
Red-ON
Green-OFF
White-Trip Circuit Healthy
Amber-Trip Condition
Set of wiring, Ferrules & Spare Fuses for Commissioning.
-
-
-
TOTAL FOR 4 PANEL 11KV HT BOARD
1
-
-
11KV TRANSFORMER (11 KV /0.433 KV) (750 KVA)
-
-
-
11KV TRANSFORMER (11 KV /433 V) (750 KVA)
-
-
-
Supply Installtion, Testing and commissioning of outdoor OIL cooled Outdoor Type Transformer 11 KV / 433 Volt Rating 3 phase, Double Wound with copper Winding. (as per IS : 1180 (part 1) : 2014 Level 2, (AMENDMENT 4) /Equivalent IEC Standard , OLTC in Steps (+5% to -10% @ 1.25%), Insulation Class : Class A , Temperature Rise : 40 Deg.c in Oil , 45 deg.c by Resistance, 50 deg.c by Ambient , Dyn 11 Vector Group and other Standard Accessories as Required Including Followings :
-
-
-
PLEASE NOTE THE TRASNFOREMR SHALL BE IN COMPLINACE WITH NEW REGUALTION IS 1180 or Equivalent IEC Standard FOR LOSSES AND EFFICIENCY and ammended upto date
Civil work shall be paid extra as per actual.
Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE cable at 11 KV side ON Load Tap Changer on HV side +5% to -10% @ 1.25%.
Standard Fittings & Accessories :-
Rating and Terminal Marking Plate - 1
Earthing Terminals - 2
Lifting Lugs - 2
Drain Valve with Blanking Plate - 1
Filter Valve with Blanking Plate - 1
Conservator - 1
Conservator Oil Filling Hole With Cap - 1
Oil Level Indicator with Min. Marking - 1
Dehydrating Breather - 1
Conservator Drain Plug - 1
Air Release Device - 1
Pressure Relief Valve - 1
-
-
-
Rollers Uni directional - 4
Thermometer Pocket - 1
Radiators Weldable - 2
HV Cable Box - 1
LT Cable Box - 1
Seperate Neutral Terminal - 1
OFF CIRCUIT Tap Changer - 1
100mm Dia Stem Type Thermometer - 1
HV & LV Bushing - 3
-
-
-
750 KVA (11/433V) AS DESCRIBE ABOVE
3
-
-
DIESEL GENERATOR SET - 100 KVA DG SET :-
-
-
-
100 KVA DG SET
-
-
-
Supply, Installation, Testing & Commissioning of 100 KVA Capacity Radiator cooled DG Set with Suitable Standard AMF Panel & suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, Generation system complete with accessories, Fuel Oil Tank & Control Panel etc as Required and sound proof acquastic enclosure suitable for outdoor installation with IP65 Protection for the DG SET (75 db @ 1m) , including supply, fixing of antivibration pads suitable for 100 KVA DG Set as per standards of Engine manufacture, provision of control cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size from fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply , Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials silencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by Engineer Incharge.
-
-
-
Diesel Engine (CPCB-2 NORMS COMPLANT) 4 Stroke, Radiator Cooled, Diesel Engine Model Developing Output Prime 80 KW Having Following Arrangement :-
Flywheel With Starter Ring for Generating Set
Air Filter , Lube Oil Cooler Assembly with Accessories.
Exhaust Air Manifold
Exhaust Bellow
Fuel Fiter
Diesel engine pre heating arrangement
Lube Oil Filter
Exhaust Gas Turbo Charger with After Coller
Day Tank For fuel with Markings
ECP Panel mounted on a Separate Frame.
Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump
-
-
-
12V Electrical Starting System with Starter Motor and Battery Charging Alternator
Engine Mounting Supports
ALTERNATOR Rated at 100 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 /IEC 60034 as per following Specification
Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation.
Voltage Regulation: Provided with Fast Response Thyristor Type Electronic automatic voltage regulator, which holds output voltage within desired limits. (+/- 1%).
Excitation: Self Excited - Self Regulated.
Alternator Loading: Suitable for Taking Rated load Immediately After Machine Reaches Rated Voltage and Speed.
Vibration: Suitable for Direct Coupling with Engine and Mounted on Common M.S. Channel Base Frame.
Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection.
Cooling: Air Cooled type with radial fan mounted on Rotor.
Winding and Insulation: Insulation class H as defined in IEC – 60034-1
-
-
-
ACCESSORIES :-
MS Base Frame Suitable for Mounting of the Offered Engine and Alternator.
Day Fuel Tank of Standard Capacity as per Rating Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc.
Residential Silencer (1.5 Meter with 750 mm dia Approx) Including Insulation of Silencer.
2 Nos 12 Volts DC Battery of SUITABLE Capacity with Leads.
1 Set of AVM Pads Fitted in Base Frame..
-
-
-
TOTAL FOR 100 KVA DG SET
2
-
-
DG ACCESSORIES:-
-
-
-
Supplying,installation,testing & commissioning of 'B' Class MS Pipe exhaust piping / chimney up to top level made out of suitable dia M.S piping complete with bends, duly painted with primer and insulated with 50 mm thick layer of LRB rock wool having 100 kg / m density, white wool. Finishing of the insulation shall be with chicken wire mesh and 26 kg.Aluminium sheet cladding all around exhaust pipe provided with self tapping screws complete as required.
-
-
-
150 mm Dia Pipe - 4.85 mm Thickness
30
-
-
250 mm Dia Pipe - 4.85 mm Thickness
30
-
-
Supply & Fixing of 75mm Thick Compressed Mineral Wool Insulation for DG Exhaust Pipe With 24 Gauge Aluminium Sheet Cladding etc as Required for The Under Mentioned Dia Pipe
-
-
-
150 mm Dia Pipe (Insulation)
30
-
-
250 mm Dia Pipe (Insulation)
30
-
-
Supply of SS Bellow.
2
-
-
AMF PANEL FOR 100KVA DG SET
-
-
-
Supply, Fabricating, Installing, Testing and Commissioning of automatic mains failure control panel IP 54 Double Door outdoor type with rain canopoy of 2mm CRCA sheet steel fabricated including manual by-pass, suitable for 100 KVA silent type DG Set complete with relays, timers, set of CTs for metering & protection and energy analyzer to indicate currents, phase and line voltages, frequency, power factor, KWH, KVAR & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF Panel to diesel engine and elsewhere, if required, all complete and inter locking including the following :
-
-
-
All MCCB`s shall have microprocessor based releases with overload and short circuit, and inbuilt earth fault protections, all with adjustable settings; adjustable time delay for S/C and E/F; with instantaneous protection; LED/LCD fault indication etc.
All metering CT’s and PT’s shall be cast resin type of accuracy class 1.0 Multi-function meter shall be with LCD display & of accuracy 1.0
All MCCB shall have Ics=100% Icu & 100% Neutral, with front operating handle and teMeterinal spreaders
All indicating lights shall be LED type only
All auxiliary transfo Meters, if required for the meeting the goals of specifications are deemed included whether specifically specified or not.
(a) 250 A, 4 Pole, 50 KA, MCCB ---- 2 No.
(b) 250A, 4 Pole AC1 duty Contactor with adequate NC/NO contacts for electrical and mechanical interlocking etc. ----- 2 Nos.
(c) 250A ON- Load change over (By-Pass) switch ----- 1 No.
(d) Auto/Manual/Test/Off selector switch
(e) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.
(f) 3 No. suitable rating current transfoMeterers 15P10 accuracy for protection and 3 No suitable rating current transfoMeterers of 15 VA burden and accuracy class-1 for metering
-
-
-
(g) Energy analyzer unit to indicate current, voltage, frequency, power factor and KWH
(h) Indicating lamps for “load on mains” and “load on set”
(i) 2A, 10 KA SP MCB for instruments protection ---- 4 No.
(j) Battery charger, complete with transfoMeterer, rectifier, D.C. voltmeter and ammeter, selector switch for trickle/ boost
(k) Main supply failure monitor
(l) Supply failure timer
(m) Restoration timer
(n) Control unit with three impulse automatic engine start / stop and failure to start lockout. (The NoMeteral or Mains source shall be constantly monitored by a main voltage monitor. When main voltage Fails or drops below 80% adjustable and selectable of the rated voltage or incase of two phase/ single phase supply, the automatic signal to the control system shall give a starting signal to generating set. As soon as the diesel generating set reaches its operating speed and attains its operating voltage the load shall be transferred on the generating set. Upon the return of the noMeteral source voltage of 90% of rated voltage for a minute the switch shall retransfer the load to the noMeteral source.)
-
-
-
(o) Impulse counter with locking and reset facility
(p) ON/OFF/ Control circuit switch with indicator
(q) Common audio & video annunciation for :
(i) High water temperature
(ii) Low lubricating oil pressure
(iii) Engine over speed
(iv) Engine fails to start
-
-
-
complete panel as above
2
-
-
MAIN LT PANEL
-
-
-
NOTE:- MCCB's Wherever Specified shall have Rotary Handle.
-
-
-
Suppy , installation, testing, Design, manufacture, supply inspection, handling, assembling, affecting proper connections, testing and commissioning of 2mm CRCA sheet steel fabricated cubical type Main L.T. Panel floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, As per IEC 60439 after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641.
-
-
-
(Under no case temperature of main LT panel shall be more at any point of the panel. To avoid heating necessary exhaust fans shall have to be provided along with top louvers).
Degree of protection IP-42
The internal control wiring shall fuse less. All control wiring and metering protection shall be by MCB's.
Colour: Siemens Gray Powder Coated or as per approved shade.
INCOMER FROM 1 Nos 750 KVA OUTDOOR TRANSFORMER, EACH WITH 1 Nos. 1250 amps Four Pole ACB of Fault Breaking Capacity 50 KA (Ics=Icu) fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated Position Indicator and Frame Earthing Contact ,Confiming to IS 13947-2 1993 as Amended upto Date Complete with Following Accessories.
1 set of 3 CT's of ratio 1250/5A, Class 1.0 accuracy 15 VA burden for APFCR.
Independent manual spring closing mechanism - 1 No.
Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set .
Multifunction meter with selector switch with suitable CT's and back up MCBs. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA.
-
-
-
3Nos. Phase indicating LED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required.
Shunt trip coil 220 Volt AC.
INTERLOCKING
Interlocking logic electrical Interlocking between incomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of The Breakers With Manual Over Ride Facility
BUS COUPLER
One Number 1250 A 50KA 4 pole ACB as Bus Coupler with ON/OFF Indication.
BUS BAR
1250 A TPN Aluminium bus bar with heat Shrink Sleeve
OUTGOINGS
ALL THE MCCB'S SHALL BE EQUIPPED/ PROVIDED WITH ALL ACCESSORIES & IN BUILT PROTECTION RELEASES 2 No. 800A 50 KA 4P ACB with Microprocessor Based Releases, ON Indication, with selector switch, matching cast resin CT's. (F1 AND F2 TO FEED RISING MAINS 1 & 2)
1 No. 250 A 50KA 4P MCCB with Microprocessor Based Releases, ON Indication, with selector switch, matching cast resin CT's. ( DG PANEL)
-
-
-
2 No. 250A 50KA 4P MCCB (SPARE)
1 No. 800A 50KA 4P ACB (SPARE)
1 No. 125A 50KA 4P MCCB (SPARE)
Other items such as
1 set of control wiring
1 Set of designation plates
NOTE :- Adequate Quantity of Fire Suppression system with Pneumatic gas cylinder and Heat Sensitive Pneumatic tubing to be used in panel as per the current fire norms & SURGE PROTECTION DEVICES Type 1 ( Class B), 4 Mode, spar type suitable for 10/350µs surge, 3Nos. phase to earth and 1Nos. neutral to earth with impulse Current Iimp. ≥ 50KA Per mode & In ≥ 25kA per Mode.
-
-
-
Complete Panel as Above and complete
1
-
-
MAIN LT PANEL
-
-
-
NOTE:- MCCB's Wherever Specified shall have Rotary Handle.
-
-
-
Suppy , installation, testing, Design, manufacture, supply inspection, handling, assembling, affecting proper connections, testing and commissioning of 2mm CRCA sheet steel fabricated cubical type Main L.T. Panel floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52, As per IEC 60439 after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641.
-
-
-
(Under no case temperature of main LT panel shall be more at any point of the panel. To avoid heating necessary exhaust fans shall have to be provided along with top louvers).
Degree of protection IP-42
The internal control wiring shall fuse less. All control wiring and metering protection shall be by MCB's.
Colour: Siemens Gray Powder Coated or as per approved shade.
INCOMER FROM 2 Nos 750 KVA OUTDOOR TRANSFORMER, EACH WITH 1 Nos. 1250 amps Four Pole ACB of Fault Breaking Capacity 50 KA (Ics=Icu) fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated Position Indicator and Frame Earthing Contact ,Confiming to IS 13947-2 1993 as Amended upto Date Complete with Following Accessories.
1 set of 3 CT's of ratio 1250/5A, Class 1.0 accuracy 15 VA burden for APFCR.
Independent manual spring closing mechanism - 1 No.
Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set .
Multifunction meter with selector switch with suitable CT's and back up MCBs. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA.
3Nos. Phase indicating LED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required.
-
-
-
Shunt trip coil 220 Volt AC.
INTERLOCKING
Interlocking logic electrical Interlocking between incomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of The Breakers With Manual Over Ride Facility
BUS COUPLER
One Number 1250 A 50KA 4 pole ACB as Bus Coupler with ON/OFF Indication.
BUS BAR
1250 A TPN Aluminium bus bar with heat Shrink Sleeve
OUTGOINGS
ALL THE MCCB'S SHALL BE EQUIPPED/ PROVIDED WITH ALL ACCESSORIES & IN BUILT PROTECTION RELEASES 2 No 630A 50 KA 4P MCCB with Microprocessor Based Releases, ON Indication, with selector switch, matching cast resin CT's. (F1 AND F2 TO FEED RISING MAINS 1 & 2)
1 No. 250 A 50KA 4P MCCB with Microprocessor Based Releases, ON Indication, with selector switch, matching cast resin CT's. ( DG PANEL)
-
-
-
2 No. 250A 50KA 4P MCCB (SPARE)
2 No. 630A 50KA 4P MCCB (SPARE)
2 No. 125A 50KA 4P MCCB (SPARE)
2 No. 160A 50KA 4P MCCB (SPARE)
Other items such as
1 set of control wiring
1 Set of designation plates
NOTE :- Adequate Quantity of Fire Suppression system with Pneumatic gas cylinder and Heat Sensitive Pneumatic tubing to be used in panel as per the current fire norms & SURGE PROTECTION DEVICES Type 1 ( Class B), 4 Mode, spar type suitable for 10/350µs surge, 3Nos. phase to earth and 1Nos. neutral to earth with impulse Current Iimp. ≥ 50KA Per mode & In ≥ 25kA per Mode.
-
-
-
Complete Panel as Above and complete
1
-
-
METER BOARD PANEL (1st to 10th Floor)
-
-
-
SITC of cubicle type compartmentalized meter panel board directly on wall cum Floor mounted made out of 2 mm thick CRCA sheet duly powder painted and suitable for fixing following energy meters and following MCB having 20 mm thick wooden plate in the bottom of energy meter and glass in front, of 100mm x 100mm for meter reading in each compartment 4 strip vertical Al. Busbar of 500 amp capacity , din rail for MCB i/c connections interconnections using Copper conductor wire of adequate size, earthing and LWB on the top , numbering and locking arrangement of each compartment separately etc. as reqd.
-
-
-
1 Nos 125 AMP MANUAL CHANGE OVER SWITCH
INCOMER 1 : 125 AMP FP MCCB (From Rising Main 1 Tap off Box)
INCOMER 2 : 125 AMP FP MCCB (From Rising Main 2 Tap off Box)
BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature.
OUT GOINGS : 6 No 63 AMP 4P MCB Including Indication Lights With 6 Nos Space for Smart Digital Type Meters (For Flats DB)
1 No 63 AMP 4P MCB (Spare)
-
-
-
complete panel as above
10
-
-
METER BOARD PANEL (1st to 10th Floor)
-
-
-
SITC of cubicle type compartmentalized meter panel board directly on wall cum Floor mounted made out of 2 mm thick CRCA sheet duly powder painted and suitable for fixing following energy meters and following MCB having 20 mm thick wooden plate in the bottom of energy meter and glass in front, of 100mm x 100mm for meter reading in each compartment 4 strip vertical Al. Busbar of 500 amp capacity , din rail for MCB i/c connections interconnections using Copper conductor wire of adequate size, earthing and LWB on the top , numbering and locking arrangement of each compartment separately etc. as reqd.
-
-
-
1 Nos 100 AMP MANUAL CHANGE OVER SWITCH
INCOMER 1 : 100 AMP FP MCCB (From Rising Main 1 Tap off Box)
INCOMER 2 : 100 AMP FP MCCB (From Rising Main 2 Tap off Box)
BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature.
OUT GOINGS : 4 No 63 AMP 4P MCB Including Indication Lights With 4 Nos Space for Smart Digital Type Meters (For Flats DB)
1 No 63 AMP 4P MCB (Spare)
-
-
-
complete panel as above
10
-
-
DG PANEL
-
-
-
Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid.
-
-
-
INCOMER 1 : 250 AMP FP MCCB (From LT Panel Normal Supply)
-
-
-
INCOMER 2 : 250 AMP FP MCCB (From DB AMF Panel)
-
-
-
Interlocking logic electrical Interlocking between incomers and it should have auto start and auto trip facility for Automatic Operation of The Breakers With Manual Over Rid Facility.
-
-
-
BUS BAR : 300 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature.
OUT GOINGS : 1 No 125 AMP 4P MCB (LIFT PANEL)
1 No 125 AMP 4P MCB (PLUMBING PANEL)
1 No 160 AMP 4P MCB (FIRE FIGHTING PANEL)
1 No 100 AMP 4P MCB (EXERNAL LIGHTING PANEL)
1 No 125 AMP 4P MCB (SPARE)
1 No 160 AMP 4P MCB (SPARE)
-
-
-
complete panel as above
2
-
-
LIFT PANEL
-
-
-
Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid.
-
-
-
INCOMER : 125 AMP FP MCCB
-
-
-
BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp.
The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature.
OUT GOINGS : 1 No 40 AMP DP MCB (STILT FLOOR DB)
1 No 63 AMP 4P MCB (Common Area DB 1)
1 No 63 AMP 4P MCB (Common Area DB 2)
1 No 63 AMP 4P MCB (LIFT 1)
1 No 63 AMP 4P MCB (LIFT 2)
1 No 63 AMP 4P MCB (MACHINE ROOM DB)
1 No 40 AMP DP MCB (SPARE)
2 No 63 AMP 4P MCB (SPARE)
-
-
-
complete panel as above
2
-
-
EXTERNAL LIGHT FEEDER PILLAR
-
-
-
Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid.
-
-
-
INCOMER:
-
-
-
1 no. 100A, 50KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CT's. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmable time switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site.
BUS BAR
TPN Aluminium bus bar with heat Shrink Sleeve rated for 125A. OUTGOING
12 nos 16A DP MCB 1 nos 40A DP MCB (ESS DB)
2 nos 40A 4P MCB (SPARE)
Other items such as
1 Set of control wiring
1 Set of designation plates
-
-
-
All Items complete as above
2
-
-
LT CABLE AND ACCESSORIES
-
-
-
SUPPLY OF L.T. CABLE:
-
-
-
Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required.
-
-
-
3.5 C X 300 Sq.mm Al. XLPE arm.
600
-
-
3.5 C X 240 Sq.mm Al. XLPE arm.
900
-
-
3.5 C X 120 Sq.mm Al. XLPE arm.
240
-
-
3.5 C X 95 Sq.mm Al. XLPE arm.
200
-
-
3.5 C X 50 Sq.mm Al. XLPE arm.
200
-
-
3.5 C X 35 Sq.mm Al. XLPE arm.
400
-
-
LT CABLE LAYING
-
-
-
Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required.
-
-
-
Upto 35 sq. mm
400
-
-
Above 35 sq. mm and upto 95 sq. mm
400
-
-
Above 95 sq. mm and upto 185 sq. mm
240
-
-
Above 185 sq. mm and upto 400 sq. mm
1500
-
-
LT CABLE JOINTING & END TERMINATION
-
-
-
Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.
-
-
-
3½ X 35 sq. mm (32mm)
8
-
-
3½ X 50 sq. mm (35mm)
4
-
-
3½ X 95 sq. mm (45mm)
4
-
-
3½ X 120 sq. mm (45mm)
8
-
-
3½ X 240 sq. mm (62mm)
20
-
-
3½ X 300 sq. mm (70mm)
24
-
-
HT CABLE AND ACCESSORIES
-
-
-
Supply of H.T. Cable
-
-
-
Supply & Testing of following 11 KV grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. 3 C x 240 Sq. mm 11 KV
1100
-
-
H.T. Cable Laying-DSR ITEM
-
-
-
H V CABLE LAYING
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm
1100
-
-
H.T Termination: DSR ITEM
-
-
-
Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 3 C x 240 Sq.mm
6
-
-
Supply and making Outdoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV ( UE )grade as required.. 3 C x 240 Sq.mm
8
-
-
Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 11KV ( UE )grade as required.. 3 C x 240 Sq.mm
4
-
-
MISCELLANEOUS ITEMS
-
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
24
-
-
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single Red colour on front side as required.
4
-
-
SITC of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)
4
-
-
SITC of First aid box as approved by Indian red cross conforming to IS : 2217.
4
-
-
SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked
4
-
-
SITC of ABC FIRE EXTINGUISHER 4 KG capacity complete in all respect ISI : 15683 marked
4
-
-
SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire Buckets of 9.5 Ltrs capacity
4
-
-
SITC of of rubber gloves of 11 KV grade as per IS : 4770.
4
-
-
SITC of cable route marker
4
-
-
SITC of ANTI SKID RUBBER MAT 1 mtr x 2 mtr. 3mm thick ISI - 15652 marked
10
-
-
EARTHING
-
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.. (BODY EARTHING)
24
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.. (NEUTRAL EARTHING)
10
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
960
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
400
-
-
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
400
-
-
LIGHTNING CONDUCTOR
-
-
-
Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I tube, having single prong at top with 85mm dia 6mm thick G.I base plate including holes etc. complete as required.
8
-
-
Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (for horizontal run )
600
-
-
Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (for vertical run )
400
-
-
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
16
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
16
-
-
CABLE TRAYS
-
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement)
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
600
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
200
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
200
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
100
-
-
RISING MAIN & ACCESSORIES :-
-
-
-
Supplying, Installing on Wall, Testing and Commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every meter, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
-
-
-
800 A, Isc = 50 kA for 1 second (Rising main 1 & 2)
75
-
-
630 A, Isc = 50 kA for 1 second (Rising main 1 & 2)
75
-
-
Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required
-
-
-
800 A, Isc = 50 kA for 1 second
2
-
-
630 A, Isc = 50 kA for 1 second
2
-
-
Supplying, Installation, Testing & Commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB (but without MCCB) complete etc. as required 125 A, Isc = 15 kA for 1 second
40
-
-
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
630 A, 50 KA,TPMCCB
2
-
-
800 A, 50 KA,TPMCCB
2
-
-
125 A, 16 KA,TPMCCB
40
-
-
RCC Hume pipes
-
-
-
Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
-
-
-
250 mm dia
400
-
-
300 mm dia
200
-
-
100 mm dia
200
-
-
Manholes
-
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
16
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
8
-
-
HDPE PIPES
-
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)
40
-
-
FIRE FIGHTING WORKS
-
-
-
FIRE PIPING,HYDRANTS and ACCESSORIES
-
-
-
Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3529 i/c fittings like elbows, tee, flanges tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes. complete as required. 150mm dia
30
-
-
Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3529 i/c including welding, fitting like elbows,tee, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: .
-
-
-
65 mm dia
55
-
-
80 mm dia
55
-
-
100 mm dia
6
-
-
150 mm dia
285
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required: Single headed Gunmetal
48
-
-
Supplying and fixing single headed external yard hydrant valve with 1 nos 63mm dia instantaneous FM Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required:: Single headed Gunmetal
2
-
-
Supply, fixing, testing and commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:
-
-
-
65 mm dia
2
-
-
80 mm dia
2
-
-
100 mm dia
4
-
-
150 mm dia
8
-
-
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm² complete as required.
2
-
-
Providing installation, testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nut, washers etc.as required. 150mm dia
2
-
-
Providing, installation, testingand commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia hole with stainless steel flange. 150mm dia
2
-
-
Supplying and fixing 63mm dia, 15 m RRL hose pipe with 63mm dia male and female coupling duly bound with GI wire, riverts etc. conforming to IS 636 (type-A) as required Gun metal
100
-
-
Supplying and fixing first-aid hose reel with MS construction spray painting in post office red, conforming to IS 884 complete with following as required. 20mm nominal internal dia water hose thermoplastic (textile reinforced) type- 2 as per IS: 12585 20mm nominal internal gun metal globe valve and nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25mm dia stop gun metal valve and M.S pipe and socket. 40M
48
-
-
Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzel conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Gunmetal
50
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:: 4 way-150mm dia M.S pipe
2
-
-
Providing and fixing pressure switch in MS pipe line including connection etc. as required.
2
-
-
Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hyraulically driven mechanical gong bell sound continuous alarm when the wet riser/sprinkler system activates, pressure gauge, emergency release, strainer, pressur switch, cock valve complete with drain valve and bypass, test control box, ball valve, MS pipe of required size, flange, orifice plate,gasket etc of following size as required: 100mm dia
2
-
-
Providing & placing on terrace (at all floor levels) polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet & overflow pipes but without fittings and the base support for tank.
2000
-
-
PUMPS & EQUIPMENTS
-
-
-
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Terrace Pump). Horizontal type, multistage, centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520.
Suitable HP squirell cage induction motor TEFC type suitabe for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure horizontal foot mountaed type Class-'F' insulation,conforming to IS:325.
M.S fabricated common based plated , coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
900 lpm at 35m Head
2
-
-
NON SCHEDULE ITEMS
-
-
-
Providing, fixing, testing and commissioning of pressure vessel (minimum 450 mm dia & 2000 mm height) for pressurization of hydrant system complete with pressure switches, pressure gauge, valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.
2
-
-
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 150mm dia
2
-
-
Providing and fixing standard firemans axe with heavy rubber handle.
50
-
-
Providing and fixing weather proof cabinet of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.
2
-
-
Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.
48
-
-
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications.
-
-
-
CO2 gas nozzle type - 9 Litre capacity (IS:15683).
48
-
-
Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).
22
-
-
ABC dry powder stored pressure type 6 kg capacity (IS:15683).
48
-
-
Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. Quoted price shall include 25 mm thick rubber mats over 50mm thick wood platform, wiring, cabling cable tray,control wiring and copper earthing from control panel to various equipment like motor starters, pump motor, etc. The panel shall have separate compartments for bus bar and cable alleys.The following components and accessories shall be mounted within each control panel.-Location-terrace level.
One No. incoming MCCB complete with the following: Voltmeter with selector switch and fuses. Ammeter with CT's and selector switch. Over voltage and under voltage tripping mechanism for persistent voltage fluctuations of ± 10% of the rated voltage for more than 5 minutes. CT operated over current and earth fault realy (IDMT) with indicating lamps. Phase indicating lamps with toggle switches.
Indication lamps for ON/OFF/TRIP starters of motor.
Copper bus bar sleeves type, rated at 400 amps for three phase & neurtal phase bus bar shall have maximum current density of 1 amps per sq.cm. and the neutral bus bar of not less than 50% capacity.
-
-
-
OUTGOING:
1 No. MCCB, Star delta starter with single phase preventer and outgoing feeder to Down comer pump motor(10.0 HP-Appx). The compartment shall contain CT operated ammeter and an indicating lamp with fuse and toggle switch for `ON'/`TRIP' status of pump motor.
Necessary cable alleys space for spare switches, internal wiring and copper earthing of all equipment shall also be included. All switch gears/control gears shall be motor duty rating.
1 No. 40 amps MCCB as spare
All MCCB's to be suitable for motor duty
-
-
-
Control Panel as described above.
2
-
-
FIRE ALARM SYSTEM & PUBLIC ADDRESS SYSTEM
-
-
-
FIRE ALARM SYSTEM
-
-
-
Providing,fixing, testing and commissioning of Conventional fire alarm control and indicating panel,microprocessor based with RS 485 communication, pulser, timer for dual stage alarm facility complete with indicators, floor selector switches, stand by SMF lead acid battery (suitable for 48 hours normaloperation & after that min. 30 minutes for full load operation),battery charger,battery box,connections to building automation system/ Firefighting pump panel etc. as required, complete in all respect as per specifications and requirements.The panel shall have facility of automatic dialling to 5 telephone numbers in case of alarm. The main control panel should give a distinct visual signal of the isolation of zone from the local indication panel. If all the zones at the local panel are isolated or if the fuse of the LCP gets blown, it should result in an open circuit fault indication at the Main Panel. Each zone should have provision of activation of hooter.The Panel shall be provided with suitable Nos. No./NC Potential free contacts for control modules as per site rquirement and as per quantity specified above. (4 Zone Panel)
2
-
-
Supply, Installation, Testing and Commissioning of Intelligent Addressable Manual call point with surface mounting, call point shall include test key feature. Also should have protection category of IP44 and extra acceesories as required
44
-
-
Supply, Installation, testing and commissioning of electronic hooters housed in sheet steel / Polymer housing suitable for wall /ceiling and surface / recess mounting including making connectionswith wires and mounting accessories.
44
-
-
PUBLIC ADDRESS SYSTEM
-
-
-
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player with seamless integration facility with main fire alarm panel for voice evacuation complete as required
2
-
-
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required
2
-
-
SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 6", Complete Aluminium grille and Metal baffle, line matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware & accesories.
116
-
-
Supply Installation Testing & Commissioning of 10W Wall speakers with following features:-Speaker Drive, Complete Aluminium grille and Metal baffle, line matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware & accesories.
11
-
-
Supply Installation testing and comisioning of 500W RMS Dual Channel Class-D Power Amplifier with Switch power technology for power electricity saving, Features: 500RMS per Channel, Amplifier Output 100V, Supply input AC 220 +/- 10% - 50/60Hz complete as required
2
-
-
SUBHEAD - CONDUITS AND CABLES
-
-
-
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required 2 x 1.5 sq.mm
1760
-
-
GRID INTERACTIVE SOLAR PHOTOVOLTAIC POWER GENERATION SYSTEM
-
-
-
Design Supply Installation Testing & Commissioning of Grid interactive roof top solar photo voltaic power generation system including space frame.
105
-
-
System description
A. SOLAR PANELS
Photovoltaic panels shall confirm to following minimum specifications:
Rated Power-minimum of 540 Wp High Efficiency MONO PERC
Tolerance ±5%
Number of cells 144
Module Efficiency 20%
Cell Efficiency 21%
Certificates IEC 61215 / IEC 61730 - Part 1 and 2
Operating temperature range -10° to 90°C
Max. System Voltage 1500V DC
Make: As per latest ALMM list and approved by Engineer Incharge
B.INVERTER Max Power Rating : 40 kW No.of MPPT : 3 No of Strings per MPP Tracker : 3 MPPT Operating Range : 200 v to 850 v DC Reverse-Polarity Protection
AC Short Circuit Protection
AC Output Overcurrent Protection Efficiency - 98%
Output Overvoltage Protection Insulation Resistance Protection
-
-
-
Ground Fault Monitoring
Anti-islanding Protection Communication : RS485/LAN
The inverters shall be BIS Certified. C. ELECTRICAL ACCESSORIES
The electrical accessories to be used in the systems shall be as follows:
1.Appropriate capacity (as per design) DC cables(XLPO Copper conductor cables) for interconnection of the array and connections of array with the inverter.
2.Suitable Array Junction Boxes, Combiner Boxes and main
Combiner Box
3.Protection Circuit like fuses and MCB
4.AppropriateDCDB (DC side distribution board)
5.AppropriateACDB (AC side distribution board)
6.Appropriate capacity AC cables to be used for interconnection between the inverter and the AC distribution panel. The above list is indicative, however, any other electrical system or equipment required for complete system shall be part and parcel of the work and nothing extra shall be paid in this regard.
-
-
-
SYSTEM INSTALLATION System shall be installed by a crew comprising experienced electricians and roofers to install this system with the highest quality of professionalism and workmanship. Solar panels will be mounted in an appropriately designed layout. Panels will be stringed together to inverters and will be wired together to feed into the electrical panel.
Output leads from the panels shall passed through high quality cpvc conduits to the inverters and then out from the inverters will be passed through similar conduits to electrical panel room located at the site. The entire hookup from the panels to the inverters, to the electrical panel will be made by Qualified Electrician as required by State law.
-
-
-
Note-
The contractor shall take instructions from IITM/consultant , prepare and submit shop drawings for space frame installation , solar panels , cabling , piping etc. along with specification sheets for all equipments for approval before procurement of any material.
The contractor shall take instructions from IITM/consultant , prepare and submit shop drawings for space frame installation , solar panels , cabling , piping etc. along with specification sheets for all equipments for approval before procurement of any material.
-
-
-
VIDEO SURVEILLANCE SYSTEM(IP CCTV)
-
-
-
Supplying, installation, testing and commissioning of 2 megapixels resolution Network Dome Camera for true HD quality images,2.8 – 12 mm varifocal lens,True Day/Night (TDN) functionality for true color image ,Motion Detection 4 Zones, Multi- Level Sensitivity Privacy Zones 4 Zones,Snapshoot Support JPEG format Password Protection Support Character Display Support(Channel /Date) ONVIF Yes,IR Illumination20-30M IR illuminators for clear images in low light conditions Wide Dynamic Range 3D noise reduction for sharper images and lower bandwidth use in low light ONVIF compliant complete in all respect.
16
-
-
Supply, installation, testing and commissioning of 2 megapixels resolution Network Bullet camera camera,Imager 1/2.8”SONY 2.43 mega low illumination CMOS, Video Compression. .H.264/MJPEG,Day/Night .Mechanical ICR, Minimum Illumination-0Lux/F1.4(IR ON) IR Illumination - 40-50M, Electronic Shutter-Auto/Manual(1/25~1/10000) Lens 2.8 – 12 mm varifocal lens,Resolution Main-stream:D1/Q1080P(960*540)/HD720P/ HD1080P 1-25/30fps,Digital Noise Reduction-3D,Wide Dynamic Range-Digital WDR Motion Detection -4 Zones, Multi- Level Sensitivity,Privacy Zones-4 Zones,Snapshoot-Support JPEG format,Password Protection-Support,Character Display-Support(Channel /Date).Regulatory Emissions-FCC Part 15 CE: EN55022,Immunity -CE: EN50130-4,IP Rating- IP66 rated enclosure to protect against dust and water damage ONVIF compliant .
8
-
-
Supply, installation, testing and commissioning of Video Management System (VMS) software shall be used to view live and recorded video from capture cards and IP devices connected to local and wide area networks. The VMS software shall have a client/server-based architecture that can be configured as a standalone VMS system with the client software running on the server hardware and/or the client running on any network-connected TCP/IP workstation. Multiple client workstations shall be capable of simultaneously viewing live and/or recorded video from one or more servers. Multiple servers shall also be able to simultaneously provide live and/or recorded video to one or more workstations. The VMS server software shall also have the ability to be installed on an IP edge device—such as an IP camera or encoder that allows for 3rd party applications—allowing the device to serve as both a server and IP video recording device.The VMS shall not charge for the number of concurrent clients (min. 50 thick clients and 16 mobile clients to be provided along with VMS)
24
-
-
Supplying of 2U Rack mount single chassis 24 channel Network Video Recorder with Gb NIC, 1 HDMI Display Port, max 2 simultaneous monitors, RS-232/485 serial port, DVD, Server, High Reliability IP Recorder. Continuously records 250Mbps of video while hosting a local client, multiple remote clients and the web server on a single server, keyboard and mouse, Professional Grade client and server software pre-installed and software updates. Access live and recorded video on multiple client PCs with free Windows, Mac or Linux client application. web server application is pre-installed on the server to access video through a web browser or free Mobile iPhone / iPad and Android apps. Maximum Storage Capacity 8 TB RAID5 per HDD & Maximum Hard Drive 6 Slot.
Make-Hanwha/Honeywell/ Bosch
2
-
-
Supply, installation, testing and commissioning of Enterprise Class 6 TB HDD.
2
-
-
Supplying, Installation,Testing & Commissioning of 55 " LED Full HD TV Resolution 1920 x 1080 ,Contrast Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W), Magic Clone (to USB), Auto Source Switching & Recovery, Lamp Error Detection, Super Clear Coating, Temperature Sensor, Plug and Play (DDC2B), Pivot Display, Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation, Button Lock, HDCP Support, Smart Scheduling, Smart F/W update, Built-In MagicInfo Premium-Swith Mounting Brackets as per Technical Specification complete in all respect.
2
-
-
Supply, Installation, testing and commissioning of 24 port Cat6 19" Modular Staggered Patch Panel (loaded) enable all possible combinations of the various types of cable. mounted on the same panel by using various toolless connector blocks/modules. Have a metal structure enabling them to be durably fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support with plastic cable guides to hold cable without need for cable ties. Include quick mounting system to mount the panel into the 19” rails Cat6 RJ45 keystone Information outlet for Data & Voice. Cat6 with a 180 termination design, wiring diagram and conductor protection cap. RJ45 Information outlet with insertion cycle (in & out) should be ≥ 750 times (I/O) . 200 Termination cycle for the IDC Life. The Information Outlet connector shall 0.35 mm Phosphor bronze gold over nickel plating.The panel shall be UL Listed, ETL 04-Connector Channel Verified, RoHS 3 compliant and compliant as per ASTM B117: 2019.
2
-
-
Supply and drawing of 4 pair 23 AWG CAT 6 U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required conforming to the following standards like ANSI/TIA 568.2-D, IEC 60332-1, IEC 60754-1. Cable Dia 5.9 ± 0.3 mm with beneding radius - 4 X Cable Diameter Operates at tested upto a frequency of 635 or above Mhz. The cable shall be UL Listed, 04-Connector ETL Verified and RoHS 3 compliant.
880
-
-
Supplying & Fixing of Fiber Panel Sliding 2-Cutout Type, Loaded with 01 Nos. of 6LC Duplex (OM3) Adapter Plate Loaded and 01 Nos of Blank Plate, 12 Nos of LCU Pigtails (OM3) should comply to G.657.A1, Splice Tray & Fiber Management Kit, 1U with all accessories complete in all respect.
2
-
-
Supplying, Installation, Testing & Commissioning of 24 port 10/100/1000 BASE-T PoE+ ports and four GbE/10GbE SFP/SFP+ uplink ports layer3 and layer 2 from day1 having static & RIP , should support at least 8 switches stack, should support redundant power supply and fan , 3 Year OEM On site NBD warranty. Please refer tender for detailed Tech Specifications.
2
-
-
Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 3 Mtrs. Long, ISO/IEC-11801-OM3 50μ Duplex, LSZH,All patch cords shall conform to ANSI/TIA-568.3-D and ISO/IEC-11801,Shall have a protective layer of spiral belt is adopted, which has excellent side pressure resistance, flexibility and bending performance. Shall be Duplex Multi Mode Fiber Optic Patch Cords OM3 50μ, Tensile load should be 600 Newton or higher and crush resistance should be 3000 Newton or higher and a Durability of ≤ 0.2 db (1000 Mating) , Shall support network line speeds up to 10 Gbps.Shall have LC-LC Connector connectors at the ends complete in all respect..
4
-
-
Supply & Fixing of OM3 50/125μ Type Pigtails of ISO/IEC-11801-OM3 Pigtails with LC Type Connectors,pigtails for terminating fibers on the FOPP complete in all respect. Make-3C3/Siemon/Panduit/Legrand
16
-
-
Supplying Installation testing and Commissioning of Small Form Factor Pluggable 10 Gigabit Ethernet (SFP+) SR Optics .
4
-
-
Supplying, Installation, Testing & Commissioning of 50μ, 6-core Multi mode OM3 ECCS Tape armored, Fiber cable as per ANSI/TIA 568.3-D, Telecordia GR-20 and ISO/IEC-11801, Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Tensile load should be 3000 Newton or higher and crush resistance should be 3000 Newton or higher ,The attenuation @ 850 nm should be ≤ 2.5 (Max) db/Km and @ 1300 nm should be ≤ 0.8 (Max) dB/Km, the fiber construction can be unitube or multitube, but tensile and crush resistance parameters should be matched, the jacket shall be LSZH complete in all respect. .
30
-
-
Supplying Installation testing and Commissioning of 24 Port Fiber Switch 10/100/1000BASE-T ports, Switch should support stacking bandwidth of minimum 160gbps, Modular operating system, 20 1 Gig SFP port with additional 4 no. of 10g SFP+ PORT, power supply, layer3 switch, each switch should be provided with stacking port/cable complete in all respect.
2
-
-
Supplying & Fixing of 22U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 22U/800d Front MS Door perforated honeycomb 22U/600w Rear MS Door (Fully Perforated - Mesh) 22U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 22U complete in all respect.
2
-
-
Supply & Installation of Heavy duty 25MM PVC Concduit along with all accessories
880
-
-
Internet
-
-
-
Supply installation testing and commissioning of G-PON as required The accepted model shall be Model No. Alphion/AONT-1501.
100
-
-
Supply installation testing and commissioning of 1 x 4 splitter as required The accepted model shall be Model No.Molex/OS2/Sm-SC,APC splitter 1:4
10
-
-
Supply installation testing and commissioning of 1 x 8splitter as required The accepted model shall be Model No.Molex/OS2/Sm-SC,APC splitter 1:8
14
-
-
Supplying and fixing of following sizes of 32mm dia inner dia with 40mm outer dia HDPE pipe in in trench to be excavated of size 35 x 75 cm, refilling the trench as required (in ordinary soil about 95% and may be less than 5% of bitumen/cement road).
600
-
-
Supply and laying of 24 coreoutdoor armoured 9/125 micron SM OS2 multiple loose tube corrugated steel tape armour thickness 0.15mm FRP rod for strength as required.
600
-
-
Supply and laying of 2 core indoor/outdoor LSHZ spiral tube G.657A1 armoured 9/125 micron SM OS2 Unitube/multiple loos tube construction in the existing PVC conduit as required.
3000
-
-
Supply installation testing and commissioning of of 42U, 800/800D with Front & Rear Perforated Door with handle lock, 1 Shelf 525mm, castors and mounting hardware packet of 20, RCC Loops, PDU 14sockets (1) as required.
2
-
-
Supply and installation of LC -LC / LC-SC- Patch cords , SM OS2 bending insensitivity (G.657 A2) , 2mm Duplex ,LSZH - 2M as required.
28
-
-
Supplying and fixing of 25mm dia.of medium class PVC conduit alongwith accessories in surface/recess or cutting the wall and making good the same in case of recessed conduit as required.
2400
-
-
ELEVATORS
-
-
-
SITC of 13 (884kg) passenger elevator (machine room less) as per specification shown below
2
-
-
Designation of Lifts-Passenger Lift – Gearless
Speed- 1.5 M/Sec (min)
Drive- V3F (Variable Voltage Variable Frequency)
Travel- 33 Mtrs. (Approx.)
Serving- Stilt to 10th Floors
No. Of Stops- 11
Required Well Size- 2550mm x 1950mm
Power Supply- 415 V Three Phase 50 Cycles Ac
Auxiliary- Single Phase 220v 50 Cycles Ac
Car size- 1600mm X 1400mm
Pit Depth- 1600 mm
Head Room- 4500
CAR ENCLOSURE
Car Ceiling- SS Hairline Finish Ceiling with Fan
Car Panels- SS Hairline Finish Panels Car Flooring- Granite Flooring or Flooring by Client (20mm Recess with extra weight of max 75 Kgs. will be provided)
Car Illumination- LED Lights
No. Of Entrance- One Location Front
Car Entrance- Centre Opening Power Doors in SS Hairline Finish
-
-
-
Door Safety- Full Height Infra Red Curtain
Landing Entrance- Centre Opening Power Doors in SS Hairline Finish
Clear Opening- 1000mm (W) X 2100mm (H)
Control- Full Collective Simplex
INDICATORS-
Car-KDS300 COP-PH Seven Segment Red Display
with Round Surface Mounted Buttons Landing-KDS300 LCI Seven Segment Red Display with
Round Surface Mounted Buttons
Cost shall be inclusive of following features/ facilities in the lift
Emergency Light and Alarm
Emergency Stop Button,Fireman's Control SwitchAuto Circuit Light & Fan Door Open and Close Button Non-Stop Button Auto-Attendant switch Over Load Service Automatic Rescue Device with batteries
Provision for Intercom
COP and LOP
Full Height Infrared Curtain
Pit Ladder
-
-
-
SITC of 20 (1360kg) passenger stretcher elevator (machine room less) as per specification shown below
2
-
-
Designation of Lifts-Passenger Lift – Gearless
Speed- 1.5 M/Sec (min)
Drive- V3F (Variable Voltage Variable Frequency)
Travel- 33 Mtrs. (Approx.)
Serving- Stilt to 10th Floors
No. Of Stops- 11
Required Well Size- 2350mm x 2950mm
Power Supply- 415 V Three Phase 50 Cycles Ac
Auxiliary- Single Phase 220v 50 Cycles Ac
Car size- 1300mm X 2400mm
Pit Depth- 1600 mm
Head Room- 4500
CAR ENCLOSURE
Car Ceiling- SS Hairline Finish Ceiling with Fan
Car Panels- SS Hairline Finish Panels Car Flooring- Granite Flooring or Flooring by Client (20mm Recess with extra weight of max 75 Kgs. will be provided)
Car Illumination- LED Lights
No. Of Entrance- One Location Front
Car Entrance- Centre Opening Power Doors in SS Hairline Finish
-
-
-
Door Safety- Full Height Infra Red Curtain
Landing Entrance- Centre Opening Power Doors in SS Hairline Finish
Clear Opening- 1000mm (W) X 2100mm (H)
Control- Full Collective Simplex
INDICATORS-
Car-KDS300 COP-PH Seven Segment Red Display
with Round Surface Mounted Buttons Landing-KDS300 LCI Seven Segment Red Display with
Round Surface Mounted Buttons
Cost shall be inclusive of following features/ facilities in the lift
Emergency Light and Alarm
Emergency Stop Button,Fireman's Control SwitchAuto Circuit Light & Fan Door Open and Close Button Non-Stop Button Auto-Attendant switch Over Load Service Automatic Rescue Device with batteries
Provision for Intercom
COP and LOP
Full Height Infrared Curtain
Pit Ladder
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements