Indian Institute Of Technology Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date11 Feb 2025
Closing Date4 Mar 2025
Tender Amount₹ 4,86,68,000
Technical
Technical
Class Of Bidder
... View More
Class-II Local Supplier
Bid Capacity
... View More
The bid capacity required to bid is an average annual financial turnover of Rs.146.00 lakhs during the last 3 years ending 31 – 3 –2024, certified by a chartered accountant. Additionally, the bidder should not have incurred any loss in more than two years during the last 5 years ending 31 – 3 – 2024. No specific formula is provided for calculating the bid capacity.
Technical Capacity
... View More
The required prior work experience for the bidder is that they should have experience in similar nature of works, with 30 marks allocated for this criterion. The minimum eligibility criteria for experience is not explicitly stated, but it is mentioned that 60% marks will be awarded for meeting the minimum eligibility criteria, and 100% marks will be awarded for twice the minimum eligibility criteria or more. The marks will be awarded on a pro-rata basis for experience between the minimum eligibility criteria and twice the minimum eligibility criteria. The bidder should have completed works of similar nature, such as Civil Maintenance works, Civil Repair & Renovation works, Plumbing works, Building Construction works, and Water supply and sewerage maintenance works. The value of executed works should be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. The bidder is required to submit a list of all works of similar class successfully completed during the last 7 years. However, no specific percentage of similar works completed is mentioned. The average annual financial turnover of Rs.146.00 lakhs during the last 3 years ending 31-3-2024 is required, but no specific amount or percentage of similar works completed is mentioned. The bidder should not have incurred any loss in more than two years during the last 5 years ending 31-3-2024. Professional Experience of 6 is mentioned, but no other specific information is available regarding the required prior work experience. Details regarding experience are required to be uploaded with the application for eligibility, including financial information, details of similar works carried out in the past, details of works in progress, and performance report of works.
Costs
EMD
₹ 9,73,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_IITM_226313_1Tender No
29/2024-25/WSYTender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://https://www.iitm.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Hostel Zone:
Charges for operating the pumps (domestic & treated water supply/open well/deep bore well/water fountain/basement/water stangation), operation and maintenance of valves by replacing gland ropes which are connected with 6 over head service reservoirs of water supply division during day / night as on requirements and distributing the water by zonal system. The rate is inclusive of maintenance of level indicator which are avalable at all OHSR, SUMPS and OHT by oiling the pulley and replacing of damaged ball and wire ropes. Necessary registers , pumping opeation log book and recording the water meter registers to be maintained. Pump opeation should notify the emergency complaints in Hostel Zone both pumping and delivery related issues as a temporary measure to avoid wastage of water.
12
156264
1875168
... More
Operation and maintenance of Main pumphouse Scada system at IIT Madras for the year 2025-26
-
-
-
... More
Charges for operation and maintenance of SCADA based system for pumping mains and distribution systems of various hydraulic zones in the campus on 24 x 7 basis all 365 days. This includes the generation of pumping operation report, Electro magnetic flow meter report, pressure sensor reports and report based on status of actuators, flow meters, level sensors, pressure gauges and Sluice valves regarding its working status in operation at various locations in the campus.This also includes the monitoring reporting and taking of water meter readings of ultrasonic water meters in SCADA system database at various locations in the campus and generation of reports of daily flow and monthly water flow.etc complete
12
66786
801432
... More
Charges for Comprehensive Annual maintenance contract for automatic water supply SCADA system, Actuators, Sensor, Flow meters consists of following scope:
-
-
-
... More
SCADA - Main panel:
Main panel consists of Siemens make CPU & I/O's S7-200 ST60 = 2 No's Siemens make 8 Channel Analogue Input EM AE08 = 1 No Siemens make 2 Channel Analogue Input & 1 Channel Analogue output EM AM03 = 1 No Siemens make Unmanaged Ethernet switch - 2 No's Switchgear and Relay boards - 1 Lot .
Rate inlclusive of Internal wiring fault rectification Relay Board/MCB/SMP fault Rectification & Replacement, Change of Siemens make CPU / I/O's/ Ethernet switches, D Link Switches.
-
-
-
... More
Remote Panel:
Remote Panel each consists of ( Total Remote Panel x 17 /18 Stations) Siemens make CPU & I/O's S7-200 ST60 = 1 No's Siemens make 8 Channel Analogue Input EM AE08 = 1 No Siemens make Unmanaged Ethernet switch - 1 No D-Link Switch's = 3 Sets Switchgear and Relay boards - 1 lot.
Rate inclusive of Internal wiring fault rectification Relay Board/MCB/SMP fault Rectification & Replacement , Change of Siemens make CPU / I/O's/ Ethernet switches, D Link Switches
-
-
-
... More
Siemens PLC Software Programming:
Minimum 3 Visits per year included for Fault troubleshooting
-
-
-
... More
Siemens WinCC Scada System: Minimum 3 Visits per year included for Fault troubleshooting
-
-
-
... More
RLT make Flow meter - 43 No's :
Wiring troubleshooting Value Parameter Instruments Calibration including 1 No's Replacement, if instruments Faults.
-
-
-
... More
RLT make Level sensor - 21 No's
Wiring troubleshooting Value Parameter Instruments Calibration including 1 No's Replacement, if instruments Faults
-
-
-
... More
RLT make Pressure Sensor 6 No's: Wiring troubleshooting Value Parameter Instruments Calibration including 1 No's Replacement, if instruments Faults
-
-
-
... More
Rapid control make Electric Actuator = 60 No's:
Wiring troubleshooting Local/ Remote Switch Replacement, Open/Close Switch Replacement, Open/Close Limit switch Replacement Adjustment of Open/Close level Limit switches, Finding the gear system problem and replacing the same spare.
Note :- Instruments / Spares : Equalient make / type compatiable to the existing system and with same Guarantee & Warranty can be used with the approval of the Engioneer-in-charge.
-
-
-
... More
Electrical Technician Support :
Visit of BE /Diploma or ITI Electrician / Experienced Technicial Weekly once and whenever needed on emergency Basis.
-
-
-
... More
Rate per month
12
220000
2640000
... More
Schedule : B - Cleaning of Over Head tank and Sumps Residential zone (Four times)
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder, washing soda solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all materials, labour, transportation, taxes and levies etc at different levels and heights. Residential Zone & Pump House Area
-
-
-
... More
Over head tanks (individual unit) of capacity varying from 800 litres to 2500 litres each at different types of quarters and other buildings in the Residential zone
3500
513
1795500
... More
Over head tanks (individual unit) capacity of 20000 litres each at Shopping centre in the Residential zone
20
3144
62880
... More
Under ground sumps capacity 15 to 40 Thousand litres in Residential zone
36
4566
164376
... More
Schedule : C - Cleaning of Over Head tank and Sumps at New C2 and New G type buliding (Four times)
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder, washing soda solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all materials, labour, transportation, taxes and levies etc.At different levels and heights.
-
-
-
... More
Over head tanks (individual unit) of capacity varying from 1000 litres to 5000 litres each at new C2 type quarters in Residential zone
240
422
101280
... More
Labour charges for cleaning the over head water tanks of capacity of 15000 litres each Fire Fighting Water Tank of new C2 type quarters in the Residential zone.
32
2109
67488
... More
Over head tanks (individual unit) of capacity 20000 litres at the New G type quarters
16
2234
35744
... More
Under ground sumps capacity 2 to 3 lakhs litres in Residential zone
16
9237
147792
... More
Under ground sumps capacity up to 0.9 lakh litres in New G type Quarters
16
5400
86400
... More
Schedule : D - Cleaning of Over Head tank and Sumps in Institute and Workshop zone (Four times)
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all materials, labour, transportation, taxes and levies etc at different levels and heights.
-
-
-
... More
Institute Zone & Work shop zone
-
-
-
... More
Over head tanks of capacity 1000 to 5000 litres each (in various buildings at various heights)
100
422
42200
... More
Over head tanks of capacity 5 to 15 thousand litres each (in various buildings at various heights)
70
2234
156380
... More
Over head tanks of capacity 15 to 25 thousand litres each (in various buildings at various heights)
70
2752
192640
... More
Over head tanks of capacity 25 to 50 thousand litres each (in various buildings at various heights)
20
3332
66640
... More
Under ground sumps of capacity 15 to 40 thousand litres each in Institute & workshop zone.
50
4566
228300
... More
Schedule : E - Cleaning of Over Head tank, Sumps Inside the campus (Hostel zone) ( Four times)
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all materials, labour, transportation, taxes and levies etc at different levels and heights.
-
-
-
... More
Hostel zone
-
-
-
... More
Over head tanks (individual unit) of capacity varying from 1000 litres to 5000 litres each at different types of quarters and other buildings in the Hostel zone
600
422
253200
... More
Over head tanks (individual unit) of capacity varying from 5000 litres to 10000 litres each at different types of quarters and other buildings in the Hostel zone
150
2234
335100
... More
Over head tanks of capacity of 5000 litres each (in various buildings at various heights) at New Boys Hostel - Flush water Tank.
120
2234
268080
... More
Over head tanks of capacity of 15000 litres each (in various buildings at various heights) at New Boys Hostel - Domestic & Fire Fighting Water Tank.
100
2877
287700
... More
Over head tanks of capacity 15 to 25 thousand litres each (in various buildings at various heights)
40
3332
133280
... More
Over head tanks of capacity 25 to 75 thousand litres each (in various buildings at various heights)
20
3787
75740
... More
Under ground sumps of capacity 15 to 40 thousand litres each in Hostel zone
100
4566
456600
... More
Schedule : F - Cleaning of Over Head Service Reservoir and Sumps in Residential ,Hostel and Acadamic zone Four times).
-
-
-
... More
Labour charges for cleaning the over head water tank / Reservoir large and small under ground sumps in various buildings / locations in the IIT madras campus as detailed below for removing the silt, dirt etc., brushing and cleaning with fresh water after applying bleaching powder, washing soda solution to the walls, floors, covers etc. complete as instructed by the department staff. The rate quoted shall be inclusive of all meterials, labour, transportation, taxes and levies etc.At different levels and heights including bailing out the water using diesel pumps etc.,complete.
-
-
-
... More
Residential Zone & Pump House Area
-
-
-
... More
Under ground sumps of capacity 25.0 lakhs litres at Main pump house (New Sump)
4
45451
181804
... More
Under ground sumps of capacity 8.50 lakhs litres at Main pump house (New Sump)
8
23310
186480
... More
Under ground sumps of capacity 6.70 lakhs litres at Main pump house (50HP Sump)
4
22052
88208
... More
Under ground sumps of capacity 4.60 lakhs litres at Main pump house (Middle Sump)
8
14713
117704
... More
Over head Reservoir of capacity 3.35 lakhs litres at Children's Park OHSR
4
11012
44048
... More
Over head Reservoir of capacity 7.80 lakh litres capacity at Staff club OHSR
4
11263
45052
... More
Over head Reservoir of capacity 6.20 lakhs litres capacity at Central School OHSR
4
11263
45052
... More
Under ground sumps of capacity 6 lakhs litres at Main pump house
8
12172
97376
... More
Overhead tank of capacity 8.3 lakhs litres at Main pump house
4
22472
89888
... More
Academic Zone
-
-
-
... More
Under ground sumps capacity 0.50 lakhs litres at Bio-Technology Building.
4
5792
23168
... More
Under ground sumps of capacity 6.70 lakhs litres at BSB Building.
4
13180
52720
... More
Over Head Service Reservoir of capacity 6.80 lakhs litres at BSB OHSR.
4
11263
45052
... More
Hostel Zone
-
-
-
... More
Under ground sumps of capacity 0.50 lakhs litres at New Boys Hostel - Flushing Water.
8
6115
48920
... More
Under ground sumps of capacity 0.50 lakhs litres at New Boys Hostel - Fire Fighting.
8
5792
46336
... More
Under ground sump of capacity 1.0 lakhs litres at New Boys Hostel - Domestic Water.
8
7459
59672
... More
Under ground sumps of capacity 6.70 lakhs litres at Godavari Hostel Building.
4
13082
52328
... More
Over head Reservoir of capacity 2.50 lakhs litres capacity at Cauvery Hostel OHSR.
4
8185
32740
... More
Over head Reservoir of capacity 3.35 lakhs litres capacity at Jamuna Hostel OHSR.
4
10130
40520
... More
Under ground sumps of capacity 1.00 lakhs litres at sarayu , Sabarmati and Tunga & Badra hostel Building.
8
7459
59672
... More
Under ground sumps of capacity 0.75 lakhs litres at Vindya Building.
4
7027
28108
... More
Schedule : G - Providing manpower for operating tractor cum trailer/tanker for water supply division at IIT Madras campus
-
-
-
... More
Towards charges for operating the tractor with water tanker/ trailer and supply of water through water tanker / trailer from the main sump / pump house near out gate to a distance of 3.0 km (not exceeding)inside the IITM campus as and when required including loading and unloading of water .One driver should be present at each shift.The time of shift shall be 6.00AM to 6.00 PM & 6 PM to 6 PM. The rate shall be inclusive of operating the tractor with trailer / tanker during all holidays/ Saturday / Sundays and necessary additional driver required for the weekly off and make shift arrangement for leave availed by the Drivers. Fuel required for the tractor shall be suppliled by IITM at free of cost.The contractor shall produce photo copies of liecense of the drivers before start of work. the contractor should provide minimum one driver per shift (two shift per day)
12
67278
807336
... More
Charges for servicing the Tractor and trailor with necessary replacement of oil, grease, filters and attending minor and major breakdown works, painting etc.,
2
100000
200000
... More
Charges for renewal of Registraction Certificate, paying necessary Road tax, necessary tests to be carried out, any maintenance works to be carried out before taking it to RTO, paying Insurance for the year etc., for the tractors available in the Main Pump House.
2
50000
100000
... More
Schedule : H - Attending day - to - day maintenance and cleaning of blocked drainage pipe lines, manholes, Inspection chambers, Gully Trap and floor trap
-
-
-
... More
Labour charges towards attending day - to - day drainage complaints including blockage removal by removing mud, sludge and silt etc deposited in the manhole, inspection chamber, kitchen and bath room floor traps and outside gully traps for smooth flow of waste water and soil waste. The rate includes cost of material such as rubber plunger, thread ball, coir rope, strips etc complete. Minimum labours to be engaged per day (9am to 5pm) for carryingout the above works - sewermen - 4 nos, in all working days of the Institute and three sewermen in saturday, sunday and public holidays.Entry of workmen into the manhole and chambers are strictly prohibited.
12
156922
1883064
... More
Schedule : I - Comprehensive Water Testing Services at IITM Campus.
-
-
-
... More
Comprehensive Water Testing Services at IITM Campus.
Comprehensive water testing service for our campus to ensure the water quality meets regulatory standards through third party NABL approved lab. Scope of Work: - Testing of water samples from various sources (STP, drinking water, borewells, storage tanks, etc.)
- Analysis of physical, chemical, and microbiological parameters
- Report detailing test results and recommendations.
STP: Weekly for three samples /inlet/SBR/final
RO Alakananda- Weekly two samples /In/out
Tap water : Weekly 7 samples all over Institute
New Sports Complex: and Library -RO /weekly -2 samples
Total: Weekly -14 samples
Parameters to be tested at 4MLD STP for Sewage/Treated Sewage :
1) pH , 2) EC µS/cm, 3) Turbidity NTU,4) TDS mg/L, 5) Alkalinity mg/L
6) Hardness mg/L, 7) Chloride mg/L, 8) Sulphate mg/L
9) Nitrate-N mg/L, 10) Nitrite-N mg/L, 11) Ammonia-N mg/L
12) Phosphate mg/L, 13) COD mg/L, 14) BOD mg/L
15) TC MPN/100mL, 16) FC MPN/100mL
-
-
-
... More
Parameters to be tested at Campus buildings for RO/ Domestic water
1) pH 2) EC µS/cm, 3) Turbidity NTU
4) TDS mg/L, 5) Alkalinity mg/L, 6) Hardness mg/L
7) Chloride mg/L, 8) Sulphate mg/L
9) Nitrate-N mg/L, 10) Fluoride mg/L
11) Iron mg/L, 12) TC MPN/100mL
13) FC MPN/100mL, Testing methodology and equipment used and Time for reporting, Certifications and accreditations details to be provided.
The reports shall be provide in the form of MS word, PPT and PDF files.
12
45000
540000
... More
Schedule : J - AMC of 20 T Weight Bridge at Main Pump House in IITM Campus for the year 2025-26
-
-
-
... More
AMC of 20 T Weight Bridge at Main Pump House in IITM Campus for the year 2024-25
12
10834
130008
... More
Schedule : H - Charges for Annual Maintenance of Smart Water Meters System installed at IITM Campus Buildings.
-
-
-
... More
Charges for Annual Maintenance of Smart Water Meters System installed at IITM Campus Buildings and other locations. The scope of work includes:
1.Smartlit Software Subscription and access to software platform and providing ongoing technical support.
2. qualified Service engineer to be visited the site atleast for three days in a month to inspect and maintain the systems.
3. During During visit, he has to check the systems, gate ways for
12
154415
1852980
... More
Schedule : A - Plumbing Maintenance works
-
-
-
... More
Attending the leaking GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in earth including trenching and filling the same. (R - Brand / Unique)
-
-
-
... More
20mm dia G.I Elbow/ Bare nipple /coupling / plug
100
355
35500
... More
25mm dia tee / elbow /bare nipple /coupling / plug
100
371
37100
... More
40mm dia tee / elbow / Bare nipple / coupling / plug
100
537
53700
... More
50mm dia tee /elbow / Bare nipple / coupling / plug
100
691
69100
... More
Attending the leaking GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in earth including trenching and filling the same. (R - Brand / Unique)
-
-
-
... More
20mm dia Pipe nipple
100
556
55600
... More
25mm dia Pipe nipple
100
650
65000
... More
40mm dia Pipe nipple
100
709
70900
... More
50mm dia Pipe nipple
100
905
90500
... More
Attending the leaking GI pipes by replacing the old corroded specials with G.I Reducer/ Reducer Elbow/ Reducer TEE including removing the pipes of suitable length and replacing the same pipe in earth including trenching and filling the same. (R - Brand / Unique)
-
-
-
... More
50 x 40mm dia
50
595
29750
... More
50 x 25mm dia
40
704
28160
... More
40 x 25mm dia
50
527
26350
... More
25 x 20mm dia
100
325
32500
... More
50x40mm dia bush
42
627
26334
... More
50x25mm dia bush
100
533
53300
... More
40x25mm dia bush
50
444
22200
... More
Dismantling G.I pipes (external work) including excavation and refilling trenches and taking out the pipe including disposal by taking out the rusted pipe from the campus.
-
-
-
... More
15mm to 40mm dia
300
40
12000
... More
above 40 mm dia
300
60
18000
... More
Charges only for relaying old/new G.I pipes of 15mm to 50mm dia (excluding excavation and refilling) including fixing, cutting & threading, joining and other sundry materials such as elbows, bends, couplings, bare nipple etc. complete. (TATA / APOLLO)
300
21
6300
... More
Dismantling G.I pipes of dia 20 to 50mm (external work) excluding excavation and refilling the trenches and taking out the pipe including disposal by taking out the rusted pipe from the campus.
300
40
12000
... More
Attending the leaking GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in walls. (R - Brand / Unique)
-
-
-
... More
25 mm dia
300
820
246000
... More
40 mm dia
200
1119
223800
... More
50 mm dia
300
1460
438000
... More
Attending the leaking GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in walls. (R - Brand / Unique)
-
-
-
... More
15mm dia elbow / bare nipple / coupling
70
320
22400
... More
20mm dia G.I TEE
56
399
22344
... More
20mm dia union
56
531
29736
... More
25mm dia tee
84
420
35280
... More
25mm dia elbow / bare nipple / coupling
200
362
72400
... More
25mm dia Plug
100
299
29900
... More
40mm dia tee
84
609
51156
... More
40mm dia elbow / Bare nipple / coupling
100
524
52400
... More
40mm dia plug
56
388
21728
... More
50mm dia tee
84
867
72828
... More
50mm dia elbow / Bare nipple / coupling
200
691
138200
... More
50mm dia Plug
56
492
27552
... More
25mm dia tank nipple
56
975
54600
... More
40mm dia tank nipple
28
1110
31080
... More
50mm dia tank nipple
42
905
38010
... More
Attending the leaking GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in walls. (R - Brand / Unique)
-
-
-
... More
15mm Pipe nipple (0.075 to 0.30m)
50
495
24750
... More
20mm dia pipe nipple ( 0.20 to 0.30m length)
60
619
37140
... More
25mm dia Pipe nipple (0.075 to 0.15m length)
120
662
79440
... More
25mm dia Pipe nipple (0.20 to 0.30m length)
84
682
57288
... More
40mm dia Pipe nipple (0.075 to 0.15m length)
42
662
27804
... More
40mm dia Pipe nipple (0.20 to 0.30m length)
42
905
38010
... More
50mm dia Pipe nipple (0.075 to 0.15m length)
70
797
55790
... More
50mm dia Pipe nipple (0.20 to 0.30m length)
56
1136
63616
... More
80mm dia B.Nipple/ Coupling/ Elbow/ P.nipple
70
1732
121240
... More
Attending the leaking GI pipes by replacing the old corroded specials with G.I Reducer/ Reducer Elbow/ Reducer TEE including removing the pipes of suitable length and replacing the same pipe in walls. (R - Brand / Unique)
-
-
-
... More
50 x 40mm dia
56
595
33320
... More
50 x 25mm dia
56
704
39424
... More
40 x 25mm dia
56
527
29512
... More
25 x 20mm dia
56
325
18200
... More
50x40mm dia bush
56
627
35112
... More
50x25mm dia bush
56
533
29848
... More
40x25mm dia bush
56
444
24864
... More
80x65mm dia G.I bush
56
1571
87976
... More
65x50mm dia G.I bush
56
1387
77672
... More
Charges only for removing old G.I pipes of 15mm to 50mm dia from walls.
1500
81
121500
... More
Charges only for fixing G.I pipes of old / new 15mm to 50mm dia on walls including teak wood packing, clamps and screws including required sundry materials such as elbows, bends, couplings, bare nipple etc. complete.
1000
188
188000
... More
Providing and fixing 'B' class G.I pipes with specials and GI clamp including cutting and making good the walls for internal / outer work with special GI clamps / concealed / open whatever required including cutting the pipe TATA / APOLLO or equivalent pipe confirming to ISI-1239 (Part-1) etc. complete.
-
-
-
... More
20mm dia pipe
220
666
146520
... More
25 mm dia
1200
935
1122000
... More
40 mm dia
300
1349
404700
... More
50 mm dia
50
1794
89700
... More
Painting G.I pipes and fittings with synthetic enamal white paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
20mm dia pipe
200
28
5600
... More
25 mm dia
1200
33
39600
... More
40 mm dia
500
47
23500
... More
50 mm dia
1300
55
71500
... More
Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc., complete.ISI Embosed.
-
-
-
... More
20mm dia pipe
50
965
48250
... More
25 mm dia
100
987
98700
... More
40 mm dia
50
1456
72800
... More
50 mm dia
50
2130
106500
... More
Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end ). ISI embosed. (R - Brand / Audco)
-
-
-
... More
15 mm Gate valve
10
1754
17540
... More
20 mm Gate Valve
20
4003
80060
... More
25 mm dia
50
4446
222300
... More
40 mm dia
40
8231
329240
... More
50 mm dia
40
11188
447520
... More
Supplying and fixing of 80mm dia Butterfly valve including taking out the existing rusted/ damaged valve, fixing the new valve to pipe line etc, complete. 80mm dia Butterfly valve
8
8953
71624
... More
Providing and fixing non-return vertical valve / foot valve of approved quality ( screwed end ). ISI Embosed. (R - Brand / Audco)
-
-
-
... More
40 mm dia
8
4724
37792
... More
50 mm dia
8
5094
40752
... More
Labour charges for removing the corroded / leaking G.I pipe wall pieces embedded in wall / concrete and fixing the new piece neatly cementing, curing etc. complete.
100
1856
185600
... More
Charges for arresting scour line leakage at OH water tank including removing of corroded G.I.pipe and arresting leakage using water proof compound (approved brand) and new GI pipe of required length including cement packing etc.
200
3466
693200
... More
Supplying and fixing of Float valve complete set to the inlet pipe inside the over head tank (Prayag)
-
-
-
... More
20 mm dia
100
1718
171800
... More
25 mm dia
250
2259
564750
... More
40 mm dia
40
2530
101200
... More
50 mm dia
40
2895
115800
... More
Labour charges for carefully removing the ball valve sets from the suction pipes during repairing of water tanks, providing temporary connections and during fixing of inlet pipes in tanks and fixing same after repair etc. complete.
500
605
302500
... More
Supplying and fixing of Chutki for ball valve set etc. complete.
-
-
-
... More
25mm dia
50
225
11250
... More
50mm dia
50
243
12150
... More
Providing and placing on terrace ( at all floor levels) polythene water storage tanks IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank etc. complete.
18000
18
324000
... More
Labour charges for transporting, shifting and carefully placing on terrace (at all floor levels) Polyethylene water storage tank of capacity 1000 to 2000 litre with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes etc. complete. (Tank and cover will be supplied by Dept. store).
40
1918
76720
... More
Providing and fixing Polyethylene water storage tank cover for tank capacity 1000 to 2000 litre with suitable locking arrangement etc. complete.
30
1134
34020
... More
Supplying and fixing of bulk type water meter conforming to IS : 2373 : 25 mm dia. ( Darvesh make/thread type)
-
-
-
... More
25 mm dia
10
9146
91460
... More
40 mm dia
5
12353
61765
... More
50 mm dia
5
17406
87030
... More
Supply, delivery and installation of AMR compatible Ultrasonic
Water Meter MID Certificated as per the technical specification mentioned in Cover 1 Clause 6.0. The rate is inclusive of FRP box of reqiured size (Make: BAYLAN/ ITRON/DIEHL ultrasonic water meters)
-
-
-
... More
25 mm dia
15
8658
129870
... More
40 mm dia
10
12353
123530
... More
50 mm dia
10
17406
174060
... More
Labour charges for carefully removing the water meter of dia 20mm to 50mm from the delivery pipes and fixing the same after service by cleaning / fixing new water meter etc. complete.
42
1008
42336
... More
Labour charges for cleaning / fixing 1no. of ferrule and spindle including earthwork excavation of size 2.0 x 0.65 x 1.00m and refilling the pit including bailing out water.
28
1430
40040
... More
Providing and fixing brass ferrule with C.I.mouth cover including boring and tapping the main of 25 mm nominal bore.
14
8509
119126
... More
Providing and fixing PTMT ball cock of approved quality,colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D plastic ball (Prayag or equivalent) 25mm nominal size, 152 mm long, having weight not less than 440 gms.
28
1515
42420
... More
Providing and fixing PTMT ball cock of approved quality,colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D plastic ball (Prayag or equivalent) 50mm nominal size, 152 mm long, having weight not less than 1240 gms.
28
2383
66724
... More
Labour charges for removing 15/20 mm dia PVC pipes inside the borewell in vertical direction.
250
20
5000
... More
Labour charges for removing 40/63 mm dia PVC pipes inside the borewell in vertical direction.
250
50
12500
... More
Providing and laying 50mm dia UPVC Sch-40 pipes (Waterflo / Finolex / Prince or equivalent) in vertical direction in borewell including fittings, roughning the end faces with emery sheet and heating the pipe to the required heat and jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
450
1039
467550
... More
Providing and fixing 63mm dia, 6 kg / sqcm PVC pipes (Finolex or equvalent make) in vertical direction in borewell including fitting, roughning the end faces with emery sheet and heating the pipe to the required heat and jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
60
1696
101760
... More
Labour charges for removing 40/63 mm dia PVC pipes inside the trenches excluding excavation and refiiling the trenches.
100
40
4000
... More
Providing and laying UPVC Sch-40 pipes (Waterflo / Finolex / Prince or equivalent) at inside trenches jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.( Earthwork will be paid seperately)
-
-
-
... More
50mm dia
200
919
183800
... More
40mm dia
50
677
33850
... More
25mm dia
50
468
23400
... More
Providing and laying UPVC Sch-40 pipes (Waterflo / Finolex / Prince or equivalent) at walls jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
75mm dia uPVC pipe
50
1456
72800
... More
50mm dia
100
868
86800
... More
40mm dia
50
677
33850
... More
25mm dia
50
468
23400
... More
Supplying and fixing of UPVC Sch-40 pipe Fittings (Waterflo / Finolex / Prince or equivalent) at walls including jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
20mm dia uPVC Elbow / Coupling / MTA / FTA / TEE
80
107
8560
... More
25mm dia uPVC Elbow / Coupling / MTA / FTA / TEE
120
196
23520
... More
40mm dia uPVC Elbow / Coupling / MTA / FTA / TEE
120
278
33360
... More
50mm dia uPVC Elbow / Coupling / MTA / FTA / TEE
120
132
15840
... More
20mm dia uPVC Union
30
312
9360
... More
25mm dia uPVC Union
30
403
12090
... More
40mm dia uPVC Union
30
500
15000
... More
50mm dia uPVC Union
30
611
18330
... More
50 x 40mm dia / 50 x 25mm dia uPVC Reducer/ bush
56
203
11368
... More
40x 25mm / 25 x 20mm dia uPVC Reducer/ bush
56
143
8008
... More
75mm dia uPVC Elbow / Coupling / MTA/ FTA
56
1317
73752
... More
75x50mm dia uPVC bush
20
1167
23340
... More
Providing and laying CPVC pipes (Ashirvad/ Waterflo / Finolex / Prince or equivalent) at inside trenches including jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.( Earthwork will be paid seperately)
-
-
-
... More
100mm dia
120
2672
320640
... More
75mm dia
120
2255
270600
... More
50mm dia
120
1505
180600
... More
40mm dia
120
976
117120
... More
25mm dia
120
620
74400
... More
20mm dia
120
196
23520
... More
Providing and laying CPVC pipes (Ashirvad/ Waterflo / Finolex / Prince or equivalent) at walls including jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
100mm dia
120
2672
320640
... More
75mm dia
120
2255
270600
... More
50mm dia
120
1505
180600
... More
40mm dia
120
976
117120
... More
25mm dia
120
620
74400
... More
20mm dia
80
327
26160
... More
Providing and laying CPVC pipes / fittings (Ashirvad/ Astral/ Finolex / Supreme or equivalent) at walls jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
Ball valve 25mm
80
986
78880
... More
Ball valve 40mm
50
2373
118650
... More
Ball valve 50mm
50
4005
200250
... More
Ball valve 80mm
50
5071
253550
... More
Ball valve 10mm
42
5766
242172
... More
Providing and laying CPVC pipes / fittings (Ashirvad/ Astral/ Finolex / Supreme or equivalent) at walls jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
25 mm dia union
30
598
17940
... More
40 mm dia union
30
730
21900
... More
50 mm dia union
30
841
25230
... More
80 mm dia union
30
1064
31920
... More
100 mm dia union
30
1287
38610
... More
Supplying and fixing of CPVC pipe Fittings (Waterflo / Finolex / Prince or equivalent) at walls including jointing with PVC solution including cutting cost, emery sheet and PVC solution etc. complete.
-
-
-
... More
20mm dia CPVC Elbow / Coupling / MTA / FTA / TEE
80
215
17200
... More
25mm dia CPVC Elbow/Coupling / MTA / FTA / TEE
120
313
37560
... More
40mm dia CPVC Elbow/Coupling / MTA / FTA / TEE
120
416
49920
... More
50mm dia CPVC Elbow/Coupling / MTA / FTA / TEE
120
829
99480
... More
80mm dia CPVC Elbow/Coupling / MTA / FTA / TEE
120
1009
121080
... More
100mm dia CPVC Elbow/Coupling / MTA / FTA / TEE
120
1217
146040
... More
20x 15mm / 25x 20mm dia CPVC thread Reducer
56
427
23912
... More
50 x 40mm / 50 x 25mm /40x 25mm dia CPVC Reducer/ bush
56
672
37632
... More
Providing temporary connection using UPVC pipes of various dia, fittings including dismantling the same after completion of work.
42
248
10416
... More
Supplying and fixing of PVC tank nipple.
-
-
-
... More
25mm dia
56
243
13608
... More
40mm dia
28
512
14336
... More
50mm dia
28
797
22316
... More
Earth work in excavation by manual / Mechanical means (depth upto 1.5 m and width upto 1m over areas including disposal of excavated earth and disposed earth to be levelled and neatly dressed all kinds of soil.
180
546
98280
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
126
264
33264
... More
Charges for only conveying the motor pump set from the section in the site of work of well or pumproom and removing the non-working pump set and fixing the working pump set and connection and test running the motor pump and attending leakages if any etc. complete and handing over the defective motor / pump set to section office stores. (The electrical connection given by Dept. from starter to motor.)
-
-
-
... More
0.5 / 1 / 2 / 3 HP Single Phase Motors.
30
1252
37560
... More
5 / 7.5 / 10 / 12.5HP Three Phase Motors.
50
2458
122900
... More
Labour charges for fixing GI specials in the GI pipes by replacing the old corroded specials with new specials including removing the pipes of suitable length and replacing the same pipe in walls etc. complete. (The G.I specials will be supplied by IITM).
-
-
-
... More
40mm dia G.I Bend
50
202
10100
... More
50mm dia G.I Bend
11
202
2222
... More
32mm dia G.I coupling
3
202
606
... More
40mm dia G.I Bare nipple
100
202
20200
... More
40mm dia G.I coupling
100
202
20200
... More
40mm dia end plug
6
202
1212
... More
50 x 40mm dia Reducer Tee
11
202
2222
... More
40 x 20mm dia Reducer
100
202
20200
... More
40 x 15mm dia Reducer
6
202
1212
... More
40 x 25mm dia Reducer
20
205
4100
... More
40 x 25mm dia Reducer Elbow
11
202
2222
... More
Labour charges for fixing water meter of 50mm dia in the existing GI pipe including removing the pipes of suitable length and replacing the same pipe in walls etc. complete. (The water meter will be supplied by IITM).
6
505
3030
... More
Charges for removing the existing filter mediums in the Activated carbon filter - Carbon Medium, Pebbeles, sand and other minor services required to take up in the Activated Carbon filter and Pressure Sand Filter etc.,
4
66774
267096
... More
Supply and filling of Filtration media like Pebbles, Silux, Rough Sand & Fine sand for 4 nos and other minor services required to take up in the Activated Carbon filter and Pressure Sand Filter etc.,
10
33804
338040
... More
Schedule : B -Cast Iron/Ductile Iron pipe line for main water supply line
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All Kinds of soil.. Pipes, cables etc, not exceeding 80 mm dia.. Item no.2.10.1.1/P-69
100
264
26400
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : in all kinds of soil Pipes, cables etc exceeding 80mm dia but not exceeding 300mm dia
100
281
28100
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth : consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m
100
264
26400
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
15
7345
110175
... More
Brick work with fly ash concrete blocks of M10 grade in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
20
10270
205400
... More
15 mm cement plaster on rough side of single or half brick wall
of mix: 1:4 (1 cement: 4 coarse sand)
150
393
58950
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50m lead as per direction of Engineer in charge. 1 : 3 : 6 or richer mix
10
2116
21160
... More
Demolishing Brickwork manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50m lead as per direction of Engineer in charge. In cement mortar
10
1790
17900
... More
Dismantling C.I. Pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and breaking lead caulked joints, melting of lead and making into blocks including disposal by taking out the rusted pipes from the campus.
-
-
-
... More
Upto 150 mm diameter
50
332
16600
... More
Above 150 mm dia upto 350 mm dia
50
455
22750
... More
Dismantling of C.I. Sluice valve including including disposal by taking out the rusted valves from the campus.
-
-
-
... More
Upto 150 mm diametre
15
273
4095
... More
Above 150 mm diametre
15
1028
15420
... More
Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)
10
314
3140
... More
Laying in position S&S or flanged C.I /DI special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials)
10
574
5740
... More
Providing and laying S&S C.I stantdard special such as tees, bends, collars, tapers and caps etc. (Heavy class)
-
-
-
... More
Upto 350 mm dia
5
15909
79545
... More
Providing and laying flanged C.I standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS:1538 (Heavy class)
-
-
-
... More
Upto 300 mm dia
5
15909
79545
... More
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :
-
-
-
... More
100mm dia pipe
5
3684
18420
... More
125mm dia pipe
5
5981
29905
... More
150mm dia pipe
5
8862
44310
... More
200mm dia pipe
5
12033
60165
... More
250mm dia pipe
5
15457
77285
... More
300mm dia pipe
5
15457
77285
... More
350 mm dia
5
20148
100740
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
-
-
-
... More
100 mm diameter Class II
3
34316
102948
... More
125 mm diameter Class II
3
20975
62925
... More
150 mm diameter Class II
3
50556
151668
... More
200 mm diameter Class II
3
153035
459105
... More
250 mm diameter Class II
3
119598
358794
... More
300 mm diameter Class II
2
165536
331072
... More
350 mm diameter class II
2
27551
55102
... More
Providing and fixing C.I /DI double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers, etc. if required will be paid seperately)
-
-
-
... More
100mm dia
3
17982
53946
... More
Providing and fixing enclosed type water meter (Bulk type) conforming to IS: 2373 and tested by municipal board complete with bolts, nuts, rubber insertions etc. (The tail pieces, if required will be paid seperately)
-
-
-
... More
200mm dia nominal bore
4
42326
169304
... More
Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron/DI , Class B (IS : 1536)
-
-
-
... More
100 mm dia C.I. Double Flanged Pipe
6
4364
26184
... More
150 mm dia C.I. Double Flanged Pipe
6
6964
41784
... More
200 mm dia C.I. Double Flanged Pipe
6
10127
60762
... More
Labour for cutting C.I pipe with steel saw .
-
-
-
... More
100mm diametre C.I pipe
6
170
1020
... More
125mm diametre C.I pipe
6
234
1404
... More
150mm diametre C.I pipe
6
317
1902
... More
200mm diametre C.I pipe
6
424
2544
... More
250mm diametre C.I pipe
6
529
3174
... More
300mm diametre C.I pipe
6
634
3804
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 :
-
-
-
... More
100 mm dia Ductile Iron Class K-7 pipes
20
2183
43660
... More
150 mm dia Ductile Iron Class K-7 pipes
20
3073
61460
... More
200 mm dia Ductile Iron Class K-7 pipes
20
4192
83840
... More
250 mm dia Ductile Iron Class K-7 pipes
20
5503
110060
... More
300 mm dia Ductile Iron Class K-7 pipes
20
6770
135400
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 :
-
-
-
... More
100 mm dia Ductile Iron Class K-9 pipes metre
25
2838
70950
... More
150 mm dia Ductile Iron Class K-9 pipes metre
25
3823
95575
... More
200 mm dia Ductile Iron Class K-9 pipes metre
25
4957
123925
... More
250 mm dia Ductile Iron Class K-9 pipes metre
25
8461
211525
... More
300 mm dia Ductile Iron Class K-9 pipes metre
25
8447
211175
... More
350 mm dia Ductile Iron Class K-9 pipes metre
25
8746
218650
... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523:Upto 600mmdia
4
29646
118584
... More
Dismantling C.I. sluice valve disc (shutter) upto 150mm dia including disposal by taking out the rusted material from the campus.
3
2766
8298
... More
Dismantling C.I. sluice valve disc (shutter) above 150mm dia upto 300mm dia including disposal by taking out the rusted material from the campus.
6
5080
30480
... More
Labour charges only for fixing C.I /DI sluice valve (with cap) upto 150mm dia complete with bolts, nuts, rubber insertions etc.
15
1123
16845
... More
Labour charges only for fixing C.I sluice valve (with cap) above 150mm dia upto 300mm dia complete with bolts, nuts, rubber insertions etc.
15
1835
27525
... More
Schedule : C -HDPE pipes for Pumping system and Distribution system
-
-
-
... More
Provding and laying PE100 PN10-Pipe Hdpe Pipe Conforming to is 4984
-
-
-
... More
40 mm dia
60
151
9060
... More
50mm dia
60
187
11220
... More
63mm dia
60
302
18120
... More
75mm dia
80
411
32880
... More
90mm dia
80
551
44080
... More
110mm dia
80
820
65600
... More
125mm dia
80
1045
83600
... More
140mm dia
80
1299
103920
... More
Providing and laying HDPE specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per BIS standards (PE 100 PN 10)
-
-
-
... More
40x40 Equal Tee PE100 PN10
50
124
6200
... More
50x50 Equal Tee PE100 PN10
50
163
8150
... More
63x63 Equal Tee PE100 PN10
10
208
2080
... More
75x75 Equal Tee PE100 PN10
10
323
3230
... More
90x90 Equal Tee PE100 PN10
10
529
5290
... More
110x110 Equal Tee PE100 PN10
10
912
9120
... More
125x125 Equal Tee PE100 PN10
10
1310
13100
... More
140x140 Equal Tee PE100 PN10
10
1776
17760
... More
50 mm (11deg bend) PE100 PN10
50
159
7950
... More
63mm (11deg bend) PE100 PN10
10
186
1860
... More
75mm (11deg bend) PE100 PN10
10
241
2410
... More
90mm (11deg bend) PE100 PN10
50
339
16950
... More
110mm (11deg bend) PE100 PN10
50
521
26050
... More
125mm (11deg bend) PE100 PN10
10
732
7320
... More
140 mm dia (11deg bend) PE100 PN10
10
918
9180
... More
50 mm dia (22.5 deg bend) PE100 PN10
50
100
5000
... More
63 mm dia (22.5 deg bend) PE100 PN10
10
127
1270
... More
75 mm dia (22.5 deg bend) PE100 PN10
10
183
1830
... More
90 mm dia (22.5 deg bend) PE100 PN10
50
280
14000
... More
110 mm dia (22.5 deg bend) PE100 PN10
50
450
22500
... More
125 mm dia (22.5 deg bend) PE100 PN10
10
661
6610
... More
140 mm dia (22.5 deg bend) PE100 PN10
10
906
9060
... More
50 mm dia (30 deg bend) PE100 PN10
50
88
4400
... More
63 mm dia (30 deg bend) PE100 PN10
10
114
1140
... More
75 mm dia (30 deg bend) PE100 PN10
10
170
1700
... More
90 mm dia (30 deg bend) PE100 PN10
10
267
2670
... More
110 mm dia (30 deg bend) PE100 PN10
20
450
9000
... More
125 mm dia (30 deg bend) PE100 PN10
10
661
6610
... More
140 mm dia (30 deg bend) PE100 PN10
10
906
9060
... More
50 mm dia (45 & 60 deg bend) PE100 PN10
50
88
4400
... More
63 mm dia (45 & 60 deg bend) PE100 PN10
10
114
1140
... More
75 mm dia (45 & 60 deg bend) PE100 PN10
10
170
1700
... More
90 mm dia (45 & 60 deg bend) PE100 PN10
25
267
6675
... More
110 mm dia (45 & 60 deg bend) PE100 PN10
25
450
11250
... More
125 mm dia (45 & 60 deg bend) PE100 PN10
10
661
6610
... More
140 mm dia (45 deg bend) PE100 PN10
10
906
9060
... More
50 mm dia (90 deg bend) PE100 PN10
50
117
5850
... More
63 mm dia (90 deg bend) PE100 PN10
10
159
1590
... More
75 mm dia (90 deg bend) PE100 PN10
15
241
3615
... More
90 mm dia (90 deg bend) PE100 PN10
50
388
19400
... More
110 mm dia (90 deg bend) PE100 PN10
50
660
33000
... More
125 mm dia (90 deg bend) PE100 PN10
10
975
9750
... More
140 mm dia (90 deg bend) PE100 PN10
10
1343
13430
... More
50 mm pipe end
50
119
5950
... More
63 mm pipe end
20
160
3200
... More
75 mm pipe end
20
231
4620
... More
90 mm pipe end
20
319
6380
... More
110 mm pipe end
25
365
9125
... More
125 mm pipe end
20
514
10280
... More
140 mm pipe end
20
515
10300
... More
50 mm pipe end cap
50
135
6750
... More
63 mm pipe end cap
20
159
3180
... More
75 mm pipe end cap
20
167
3340
... More
90 mm pipe end cap
25
288
7200
... More
110 mm pipe end cap
50
295
14750
... More
125 mm pipe end cap
20
242
4840
... More
140 mm pipe end cap
20
297
5940
... More
63x50 Reducing Tee
15
329
4935
... More
76x63 Reducing Tee
15
525
7875
... More
90 x 75 Reducing Tee
15
660
9900
... More
110 x 90 Reducing Tee
15
1115
16725
... More
125 x 110 Reducing Tee
15
1632
24480
... More
140 x125 Reducing Tee
15
2237
33555
... More
160 x 140 Reducing Tee
15
3288
49320
... More
50 x 32 mm Pipe Reducer
50
128
6400
... More
50 x 40 mm Pipe Reducer
50
141
7050
... More
63 x 40 mm Pipe Reducer
20
162
3240
... More
63 x 50 mm Pipe Reducer
20
180
3600
... More
75 x 63 mm Pipe Reducer
20
181
3620
... More
75 x 50 mm Pipe Reducer
20
181
3620
... More
90 x 75 mm Pipe Reducer
20
195
3900
... More
90x63 mm Pipe reducer
20
195
3900
... More
110 x 90 mm Pipe reducer
20
212
4240
... More
110 x 75 Pipe Reducer
20
231
4620
... More
50 mm Slip on flange
50
202
10100
... More
63 mm Slip on flange
20
248
4960
... More
75 mm Slip on flange
20
274
5480
... More
90 mm Slip on flange
50
323
16150
... More
110 mm Slip on flange
20
426
8520
... More
140 mm Slip on flange
20
743
14860
... More
50 mm Blind flange
50
245
12250
... More
63 mm Blind flange
20
312
6240
... More
75 mm Blind flange
20
358
7160
... More
90 mm Blind flange
25
437
10925
... More
110 mm Blind flange
50
590
29500
... More
140 mm Blind flange
20
995
19900
... More
50 mm Sandwich Flange
50
1003
50150
... More
63 mm Sandwich Flange
10
1165
11650
... More
75 mm Sandwich Flange
10
1430
14300
... More
90 mm Sandwich Flange
25
2115
52875
... More
110 mm Sandwich Flange
25
2390
59750
... More
140 mm Sandwich Flange
25
2780
69500
... More
Attending leakages and required jointing of HDPE pipes and jointing specials with necessary welding.(Earthwork will be paid seperately )
-
-
-
... More
40 mm dia
100
49
4900
... More
50 mm dia
100
49
4900
... More
63 mm dia
100
49
4900
... More
75 mm dia
100
49
4900
... More
90 mm dia
50
49
2450
... More
110 mm dia
150
70
10500
... More
125 mm dia
50
70
3500
... More
140 mm dia
25
70
1750
... More
Schedule : D -Raising the existing Chambers, Manholes and supplying and fixing of SFRC covers at various places in IITM campus
-
-
-
... More
Raising the existing chambers of opening size 0.60mx0.60mupto 30cm height by dismantling the existing plastering, covers and providing Brick work masonry with fly ash bricks of class designation 110 in foundations and plinth in cement mortar 1:4(1 cement, 4 Coarse sand) including inner plastered in Cm 1:3 (1 cement, 3 fine sand) finished with a floating coat of neat cement, 12mm thick, outer plstered with 20mm thick cement plaster on rough side of single or half brick of mix 1:4(1 cement : 4 fine sand) etc, complete.
20
15140
302800
... More
Raising the existing circular Manholes upto 30cm height by dismantling the existing plastering, covers and providing Brick work masonry with fly ash bricks of class designation 110 in foundations and plinth in cement mortar 1:4(1 cement, 4 Coarse sand) including inner plastered in Cm 1:3 (1 cement, 3 fine sand) finished with a floating coat of neat cement, 12mm thick, outer plstered with 20mm thick cement plaster on rough side of single or half brick of mix 1:4(1 cement : 4 fine sand) etc, complete.
5
14514
72570
... More
Raising the existing chambers of opening size 0.80mx0.80m upto 30cm height by dismantling the existing plastering, covers and providing Brick work masonry with fly ash bricks of class designation 110 in foundations and plinth in cement mortar 1:4(1 cement, 4 Coarse sand) including inner plastered in Cm 1:3 (1 cement, 3 fine sand) finished with a floating coat of neat cement, 12mm thick, outer plstered with 20mm thick cement plaster on rough side of single or half brick of mix 1:4(1 cement : 4 fine sand) etc, complete.
10
17464
174640
... More
Supplying and fixing of SFRC Cover and frame conforming to IS 12592, fixed in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.
-
-
-
... More
600 x 600mm Square (Medium duty MD- 20 grade designation)
20
5350
107000
... More
450 x 450mm Square (Medium duty MD- 20 grade designation)
20
3797
75940
... More
300 x 300mm Square (Medium duty MD- 20 grade designation)
20
2013
40260
... More
Supplying and fixing of SFRC Cover and frame conforming to IS 12592, total weight of cover and frame to be not less than 182 kg fixed in cement concrete 1:2:4( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.
-
-
-
... More
600mm internal diameter (Medium duty MD- 20 grade designation)
15
5852
87780
... More
600mm internal diameter (Heavy duty HD- 20 grade designation)
6
6705
40230
... More
Earth work in excavation over areas (not exceeding 1.5m in width or 10Sqm on plan ) including dressing of sides and ramming of bottom, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil
50
565
28250
... More
Extra earthwork for every additional lift of 1.50m or part thereof in all kinds of soil.
20
127
2540
... More
Construction of masonry chamber 60x60x45cm inside with 100 class designation Masonry block in Cm1:4( 1 cement : 4Fine sand) including cement concrete 1:3:6 ( 1 Cement : 3 coarse sand : 6 25mm nominal size aggregate) and inside plastering in CM 1:3( 1 Cement : 3 Coarse sand) 12 mm thick finished with a floating coat of neat cement complete, 600 x 600mm Square (Medium duty MD- 20 grade designation) as per standard design.
10
8634
86340
... More
Extra depth for chambers of size 60x60cm
2
10287
20574
... More
Constructing masonary circular manhole 1.22m internal dia at bottom and 0.60m dia at top in cement mortor 1:4 (1 Cement : 4 coarse sand) inside cement plaster 20mm thick with cement mortor 1:4 (1 Cement : 4 coarse sand) foundation concrete 1:3:6 ( 1 cement : 3 Coarse sand : 6 graded stone aggregate 25mm nominal size) and making necessary channel in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design: 2.65m deep with SFRC Cover and frame (Medium duty MD- 20 grade designation) 600mm internal diameter conforming to IS 12592, fixed in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. ( Excavation, Foot rest and 20mm thick cement plaster at the external surface shall be paid for separately) upto 2.30m depth
1
37288
37288
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming toIS : 1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protuded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standerd drawing and suitable to with stand bend test and chemical resistance test as per specifications and having manufacturers permanent identification mark to be visible even after fixing, including fixing in man holes with 30x15x15cm cement concrete block 1:3:6 (1 cement: 3 corse sand: 6 graded stone aggregate 20mm nominal size) complete as per design.
3
2118
6354
... More
Hiring charges for JCB for levelling the rubbish and earth. The rate is inclusive of fuel charges and operator beta.
50
1477
73850
... More
Schedule : E -Replacing the Damaged Sewer Line in IIT Madras
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming , watering,etc. and disposing of surplus excavated soil as directed, within a lead of 50m.All kinds of soil. pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
100
304
30400
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all round S.W.pipes including bed concrete as per standard design;
-
-
-
... More
100 mm diameter S.W / PVC pipe
5
1026
5130
... More
150 mm diameter S.W / PVC pipe
5
1255
6275
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls,floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: for pipes 100 to 250 mm diameter
50
701
35050
... More
Supplying and laying PVC Pipes of class III cateogry (6kg/sqcm) including jointing with necessary solvent and including fittings etc.complete in all levels and depths as per the directions of the Engineer-in-charge - 110mm dia PVC pipes - Finolex or equivalent.
100
329
32900
... More
Supplying and laying PVC Pipes of class III cateogry (6kg/sqcm) including jointing with necessary solvent and including fittings etc.complete in all levels and depths as per the directions of the Engineer-in-charge - 160mm dia PVC pipes - Finolex or equivalent.
100
496
49600
... More
Providing and fixing square-mouth S.W.gully trap grade "A" complete with C.I Grating masonry block masonry chamberwith class designation 100. with water tight SFRC cover with frame of 300x 300mm size(inside) .100x100mm size Ptype.
10
5224
52240
... More
Supplying and fixing of plain bend of required degree PVC 100mm ( Finolex or equalient make)
50
291
14550
... More
Supplying and fixing of 125mm x 100mm PVC reducer ( Finolex or equalient make)
50
310
15500
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
39
620
24180
... More
Schedule : F-Cleaning of Septic tank and Manhole chamber
-
-
-
... More
Towards charges for suction, loading and transporting of sewage water through lorry from manholes / Septic tank for removal of blockages inside IITMadras campus and unloading at near by chamber or Sewage pump house(STP). At IITM Campus
71
3158
224218
... More
Cleaning of Sewage Manhole chambers using Super Sucker Machine at IIT Madras - Towards charges for suction, loading and transporting of sewage water through lorry from manholes / Septic tank for removal of blockages inside IITMadras campus and unloading at near by chamber or Sewage pump house(STP).
66
12861
848826
... More
Schedule : G -FRP tank and Painting work
-
-
-
... More
Supplying and fixing 1000 / 2000 litres capacity of FRP tank made using randomly packed glass fibre reinforcement of required capacity using drinking water portability polyester food grade resin (inner layer) as the matrix. The outer layer of the tank is laminated with ultra violet stabilised polyester resin as the binding fibre matrix. the wall thickness and physical properties of tank is confirm BS:4994 : 1987 standards. The wall thickness minimum 4mm. The rate inclusive of supply, erection of tank with all accessories, including lift of tank to terrace level etc., complete. The tank is provided with manhole cover with locking facility, inlet and outlet pipes etc., complete.
2000
29
58000
... More
Labour to engaged for emergency works such as cleaning sorroundings of Pump house, Collection well, STP premises sanitizing the Pump House premises, water logging areas, intercarting chemicals, water tank pumping and jetting for cleaning the culverts etc., including wearing necessary PPE and tools for cleaning and spraying.
60
979
58740
... More
Schedule : H -Maintanence of Sluice Gates/shutters/valve
-
-
-
... More
Maintenace and Service of sluice gate/shutter/valve fitted in surplus weir, main pump house. Conduct regular internal inspections and maintenance, including cleaning and lubrication, as well as replacing or repairing components when necessary. * Inspection: Regular visual checks for wear, corrosion, and structural integrity of the gate and associated components.
* Cleaning: Removing debris, sediment, and vegetation from the gate and surrounding areas to prevent blockages.
* Lubrication: Applying grease or oil to moving parts, such as hinges and seals, to ensure smooth operation.
* Sealing: Checking and replacing seals and gaskets to prevent leaks and maintain water pressure.
* Painting and Coating: Applying protective coatings to prevent corrosion, especially for metal gates.
* Mechanical Repairs: Fixing or replacing worn or damaged components, including gears, motors, and chains. repairing including supplying and fixing of insulation gland, nut bolts etc. and putting the same in operational condition all complete as per direction of Engineer in charge.
* Hydraulic System Maintenance: Checking and servicing hydraulic components, if applicable, to ensure proper operation.
* Testing: Conducting functional tests to verify that the gate opens and closes correctly and can withstand expected water pressures.
* Documentation: Keeping records of maintenance activities, inspections, and repairs for future reference.
* Emergency Preparedness: Ensuring that emergency procedures and access to necessary tools and parts are in place.
5
12062
60310
... More
Schedule : I - Supplying of chemicals
-
-
-
... More
Supply and delivery of Liquid Sodium Hypochlorite 50 to 60 gms (5 - 6%) per litre w/v basis to Main pump house,IIT Madras. The rate quoted shall be inclusive of all transportation, loading and unloading,storage and dosing etc. complete. * Dosage Requirements :
a) The dosage depends on the quality of raw water, including turbidity, pH, temperature, and the presence of organic matter.
b) Typical chlorine dosages for potable water range from 1 to 5 mg/L (ppm).
c) Chlorine residuals should be maintained between 0.2 and 0.5 mg/L at the point of consumption to ensure disinfection.
* Storage and Handling : a) Store in a cool, dark place to slow degradation. Use corrosion-resistant materials like PVC, rubber-lined tanks, or HDPE for storage.
*Safety Measures
a) Chlorine gas requires special safety protocols, including leak detection systems, self-contained breathing apparatus (SCBA), and training for personnel.
b) Sodium hypochlorite can cause skin and eye irritation; therefore, personal protective equipment (PPE) such as gloves and goggles should be used during handling.
-
-
-
... More
c) Chlorine dosing equipment should include safety interlocks, automatic shut-off systems, and emergency scrubbers.
*. Regulatory Compliance
a) Compliance with local and international water quality standards (such as WHO guidelines or national drinking water standards) is essential.
b) Proper documentation and record-keeping for chlorine usage and residual monitoring are required.
* Chlorination Equipment Specifications
a) Metering Pumps (for liquid hypochlorite): Should be able to adjust dosing rates based on water flow and chlorine demand.
b) Mixing Tanks (for solid calcium hypochlorite): Should allow for proper dissolution before dosing.
* Emergency Measures
a) Have chlorine neutralizing agents such as sodium thiosulfate on hand for spill response.
b) Establish an emergency response plan for chlorine leaks or accidental releases.
7000
12
84000
... More
Repairing of Over Head Tanks
-
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
20
1790
35800
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
10
3086
30860
... More
Demolishing cement concrete or lime concrete manually / by mechanical means and disposal of material within 50m lead as per direction of Engineer in charge.1:3:6 or richer mix.
10
2116
21160
... More
Brick work with non modular fly ash bricks conforming to IS: 12894 – 2002, class designation 100 average compressive strength in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 Cement : 4 Coarse sand)
5
7873
39366
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform (For all RCC items.)
50
767
38350
... More
Providing and laying in position machine batched and machine mixed design mix M-35 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability.All works above plinth level upto floor V level
5
10080
50400
... More
Reinforcement for R.C.C. work including staightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars using MS binding wire 18 gauge
400
90
36000
... More
12mm cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1 Cement : 4 fine sand )
80
361
28880
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactures
100
61
6100
... More
6mm Cement plaster of mix CM:1:3 (1Cement : 3 Fine sand )
100
253
25300
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
50
294
14700
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc., wherever required for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. The lavational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (This item will operated with the approval of the Executive Engineer and wherever absolute requirement for the safety of the work).
100
285
28500
... More
Supplying and fixing C.I. cover with frame for manholes 455x610 mm rectangular C.I.Cover (light duty) the weight of cover to be not less than 23Kg. and frame not less than 15Kg
20
1341
26820
... More
White washing with lime on new work to give an even shade in all floors. three or more coats.
50
32
1600
... More
Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacturer over plastered surface to prepare the surface even and smooth complete
50
214
10700
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface etc. complete.
48
64
3072
... More
Wall painting with plastic acrylic emulsion paint of approved brand and manufacture to give an even shade in all floors: Two or more coats on new work
50
138
6900
... More
Providing and fixing G.I pipes complete with G.I fitting and clamps i/c cutting a and making good the walls etc 25mm dia
50
491
24550
... More
Painting G.I Pipes with synthetic enamel white paint with two or more coats over a ready mixed priming coat both of approved quality for new work for 25 mm dia nominal bore
48
26
1248
... More
Providing and fixing gun metal gate valve with CI wheel of approved quality (Screw ended): 25mm dia
60
532
31920
... More
providing and fixing 25mm dia GI puddle pipe of size 25mm dia delivery and scour line including welding with 75mm dia 4mm thick MS plate and welding the puddle pipe with wall reinforcement complete etc.
50
231
11550
... More
providing and fixing G.I.Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 25 mm nominal bore
50
369
18450
... More
Labour charges fixing G.I pipes complete with G.I fitting and clamps i/c cutting a and making good the walls etc 25mm dia
50
165
8250
... More
Hire charges for providing temporary barricading around the site using GI corrugated sheet to a height of 6m. The GI corrugated/plain sheets of 0.6mm thick shall be fixed to the framework made out of 40mm dia MS pipe for vertical strut placed at about 3m centre to centre with required bracing using 40mm dia MS pipe placed about 2m centre to centre and fixing diagonal middle braces using 40mm dia MS pipe forming a rigid frame work as per the architectural drawing and direction of Engineer incharge.
40
959
38360
... More
Supplying and carefully placing on terrace (at all floor levels) Polyethylene water storage tank of capacity 1000 to 3000 litre with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes etc. complete. (Tank and tank cover will be taken away by the contractor after completion of repair work)
15
2850
42750
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
250
219
54750
... More
Removing cement plastering in flooring and wall plastering carefully removing and using chisel including stacking of serviceable materials and disposal of un-serviceable material within 50m lead including scaffolding and disposal of debris outside the campus
50
160
8000
... More
Exposed reinforcement bars – if corroded shall be cleaned by manual wire-brush cleaning and applied with Mixcoat ZR / Concresive ZRi – Epoxy Zinc rich primer or NITO ZINC (fosroc) as per the technical and application recommendations of the manufacturer and allowed to dry for at least 24 hours
1
941
941
... More
Supplying and applying two part flexible cementitious water proof coating brush bond 1.50 mm thick at a coverage of 12m2 / 25kg pack of cementitious material with Nitobond BB 4 litre) including necessary surface preparation etc., complete as per specifications.
1
340
340
... More
Applying bonding coat of Nitobond – EP (Epoxy based coating) or equivalent approved by Engineer in-charge over the roof slab (where gutters to be constructed) for bonding new concrete to the existing concrete complete.
1
546
546
... More
Plastering the surface with polymer modified mortar of CM 1:4 (1 cement : 4 Sand )of 20mm thickness admixed with Nito bond SBR latex or equivalent approved by Engineer in-charge products @ 2 lts per bag of cement.
1
450
450
... More
Applying lokfix (polyster resin grout) or equivalent approved by Engineer in-charge for steel reinforcement to fixing into existing concrete surfaces. Rate inclusive of labour and materials etc, complete
1
67
67
... More
Plastering with cement mortar of thickeness 15mm or more using cement mortar 1:4
1
238
238
... More
Carrting out Micro-concreting as per the following technical specification.
TECHNICAL SPECIFICATION / WORK METHODOLOGY FOR MICRO-CONCRETE/ NON-SHRINK CONCRETE
1. The affected concrete member shall be cleaned thoroughly by wire brush cleaning and washed with copious amount of water by high pressure water-jetting.
2. Exposed reinforcement bars – if corroded shall be cleaned by manual wire-brush cleaning and applied with Concresive ZRi – Epoxy Zinc rich primer or NITO ZINC (fosroc) as per the Technical and application recommendations of the manufacturer and allowed to dry for atleast 24 hours.
3. Supplying and Applying Concresive 1414 / Nitobond EP – Epoxy based Bonding Agent over the above prepared Concrete using a stiff brush as per the Technical and Application recommendations of the manufacturer.
4. Supplying and Pouring Emaco S46T / Rendroc HB2 – Cementitious Non-shrink, Micro Concrete into the erected formwork, for a nominal thickness of 50mm and whilst the above Bonding agent is tacky, and as per the Technical and Application recommendations of the manufacturer.
5. The formwork/shuttering shall be removed the next day and curedby placing wet hessain bags over the treated member.
2
67348
134696
... More
Crack repair to wall :-Cutting of crack mouth, as ‘V’ groove of 10 mm x 10 mm, & sealing with Sikaflex 11 FC (polyurethane sealant) (or MASTER FLEX 474 of BASF or equivalent product of / FOSROC) as per the manufacturers' specification and methodology.
2
331
662
... More
Supplying and applying ( MIXGUARD HR-5 or equivalent product of SIKA/ FOSROC/ BASF) cold applied elastomeric water proof membrane over the prepared surface, prepare a base surface stabilizing primer (MIXPRIME AC100 @ 2 : 1 : 3 (MIXPRIME AC100 : WATER : OPCEMENT) and apply directly (@ 1KG/SQM) along with MIXMAT GFM-50 at an overlapping of 50mm minimum After a curing period of 3-4 hours prepare and apply MIXPRIME AC @ over at a consumption of 250ML/SQM. After curing of 3-4 hours apply a coat of MIXGUARD HR – intermediate elastomeric water proof coat at consumption of 0.5KG/SQM. After a curing time of 4-5 hours apply MIXGUARD HRXtra - Micro fibre reinforced high tensile top coat at consumption of 0.5KG/SQM. Leave 72 hours time for complete system curing. Total build up DFT of the system will be 1700 microns.
2
1029
2058
... More
Providing polymer modified coving floor wall junctions using CM 1:4 admixed with Nito bond AR @ 1.5 lts per bag of cement complets as per the specifications
50
288
14400
... More
Other Civil works
-
-
-
... More
Providing and fixing Fibre-reinforced plastic (FRP) water storage tank cover for tank capacity 1000 to 2000 litre with suitable locking arrangement etc. complete.
5
3768
18840
... More
Providing electric groove cutting for bituminous and concrete road to depth of 80mm-100mm including cost of cutting machine,cost of blade, coolant, cleaning of groove,enamel paint marking, cost of conveyance of all materials, labour, lead and lift charges and all other incidental charges as per direaction of EIC,Completed.
50
1107
55350
... More
Supplying and filling in plinth with M-sand under floors, including watering, ramming, consolidating and dressing complete.
10
3125
31250
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks (Grey and Red Colour Paver block (80 mm thick, M-30) )in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-30 grade with Red color design and pattern. Complete.
50
1180
59000
... More
Taking out existing CC interlocking paver blocks from footpath / central verge,including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Char
50
98
4900
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
50
406
20300
... More
PU INJECTION GROUTING-methodology and specification:1. Holes of 10mm dia shall be drilled on the leakage/damp spot in the Ceiling of the R.C slab using a portable Electric drill and a non-return ball-valve packer shall be fixed in the holes.2. Supplying and injecting PU based foam injection grout MEYCO MP355 1K of BASF or equivalent product– through the above fixed packers using a High-pressure one component Resin Injection pump until point of refusal. In case dripping of resin is observed through the packer hole, then the same shall be temporarily plugged with Masterseal 505 of BASF or equivalent product – Instant plugging compound. Note: Whilst we recommend the simultaneous injection of Acrylate Resin Masterflex 810 to stabilize the leak zone, this additional process would involve the fixing of an additional packer alongside the one fixed as in (1) above and the Acrylate resin Masterflex 810 shall be grouted with the same pump but after 24 hours of injecting Meyco MP355 1K of BASF or equivalent product of BASF.
5
2800
14000
... More
Supplying ,fixing and testing of stainless steel Spray Nozzle and head for Fountain in Gajdenran Circle,complete
10
358
3580
... More
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5
147
735
... More
Finishing with Epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer’s specification including appropriate priming coat, preparation of surface etc complete. On steel work (Asian/Berger/ICI).
5
299
1495
... More
Provding and laying 75mm-OD-HDPE-Pipe Hdpe Pipe Conforming to is 4984
5
558
2790
... More
Hire charges for 5HP submersible motor for pumping out the water. The rate inclusive of transport charges, necessary hose pipes , handling charges etc, complete.
10
3895
38950
... More
Supplying of Bleaching Powder for water supply in IIT Madras campus.
200
65
13000
... More
Providing and fixing pre-coated Galvanizes sheet roofing accessories 0.50mm +- 5% total quoted thickness (TCT) zinc coating 120 GSM as per IS 277 in 240 MPa steel grade 5-7 micron epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling by self tapping screws or with polymer coated Z or L hooks bolts and nuts and GI seam bolt and nut, GI plain and bitumen washer complete at all levels. - Gutter (600mm overall girth)
10
1989
19890
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%