Indian Institute Of Technology Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Indian Institute Of Technology - IIT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Nov 2024
Closing Soon26 Nov 2024
Tender Amount₹ 1,10,99,000
Costs
EMD
₹ 2,22,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Proposed Renovation And Interior Work For Converting The Existing Weightlifting Room Into Gymkhana Office In Ground Floor And Creating New Conference Room In Third Floor For Old Sports Complex Building And Replacing The Existing Roofing With Aluminiu
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IITM_213452_1Tender No
26/2024-25/CompositeTender Authority
Indian Institute Of Technology ViewPurchaser Address
-Website
http://https://www.iitm.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying Vitrified tiles in floor in 800MM X 800MM SIZE (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 c ement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. BRANDS : KAJARIA OR SOMANY Size of Tile 800 x 800 mm
259.65
-
-
Interior painting: (two or more coats over a primer coat including complete scraping, other surface preparation like removal of loose paint residuals, damaged plastering, repairs to plaster, white cement based (JK / Birla) touch up putty / primer and making good the wall surface etc) Applying interior paint of approved colour, make, brand and product at the approved rate of surface coverage of painting as per Annexure A.1.3. The interior paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with sealing the surface with a coat of approved interior primer before application of top coat of exterior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions mentioned in the Annexure 1. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
180
-
-
Interior Acrylic Interior emulsion paint (ICI /Asian / Berger / Nippon / Nerolac): (One or more coats excluding complete scraping and primer but including other surface preparation like removal of loose paint residuals, damaged plastering, high pressure jet washing, repairs to plaster, white cement based (JK / Birla) touch up putty / primer and making good the wall surface etc). Applying interior Acrylic Interior emulsion paint ( Asian / ICI / Berger) of approved colour, make, brand and surface coverage of painting as per the manufacturer specefication. The interior paint shall be applied over dry surface after removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with High pressure Jet washing whereever required before application of top coat of interior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying top coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport,scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.
618.11
-
-
Enamel painting for doors / windows / wall panels (two or more coats including a coat of primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats over a coat of primer as per Annexure A.1.4. (Top coat enamel coverage not less than 8.83sqm per litre for two coats over a coat of primer as per manufacturers specifications). The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc. (Asian (Premium Gloss Enamel) / Berger Luxol High Gloss Enamel / / Nippon Hi Gloss Enamel).
200
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting BRANDS: SAINTGOBAIN GYPROC ANUTONE OR ARMSTRONG
66.1
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,
-
-
-
spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge.
-
-
-
With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
880
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead For thickness of tile 10mm to 40mm
10
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead
25
-
-
Disposal of all building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved corporation dumping ground outside IIT Madras campus or as approved by Engineer-in charge, beyond 50m initial lead, for all leads including all lifts involved. Contractor shall remove all debris generated during construction/ renovation work
135
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper will be paid separately).
11.34
-
-
Providing and fixing Dorma make heavy duty Lock ( Model number 278 )for entrance Main door as per the direction of Engineer in charge.
7
-
-
Providing and fixing DORMA patch fitting of PT 20-Top Patch & PT 10-Bottom patch with special accessories for glazed door etc.
7
-
-
Providing and fixing Dorma make (Model number XLC -34H ) 30x 600mm long heavy duty tubular handles for entrance Main door as per the direction of Engineer in charge.
7
-
-
Providing and fixing Wall Paneling with 48mm x 25mm x 0.8mm ‘C’ G.I studs or equivalent aluminium section of size 65x25x2mm, vertical member placed 610mm interval and horizontal supports at 1200 mm levels with 10mm thick BISON PANEL (Cement Bonded Particle Board confirming to IS : 14276) and 1.00mm thick mica for outer finish and interior emulsion paint of approved colour etc.complete maintaing 25mm air gap between the wall and panel filled with polywool..
52.79
-
-
ARMSTRONG ALUMINIUM METAL FALSE CEILING-perforation of 1.80mm dia WITH AXIOM TRIM CHANNEL 50MM tk at alround.
Providing and fixing in true horizontal level Armstrong microlook edge ceiling tiles with substrate of size 600mmx600mmx15mm having NRC 0.90, Light reflectance of 80% (WT), thermal conductivity k = 0.040 W/m0K, Humidity Resistance of 95% RH, and having Fire Performance CLASS 1 (BS 476). The tile shall have a front facing of white scrim tissue of 180 gsm and 45 gsm formaldehyde free fiber tissue backing and shall be laid on Armstrong grid systems with 15mm wide T- section flanges colour white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees.
35.69
-
-
Supply and Installation of Anutone Subtex NRC burled square edge, FR grade NRC fabric (colour choice) wrapped glassfibre core panel of size 600x1200x25mm having density 100-120Kgs/m3, weight 3.0kg/m2 installed by using impaling clip.Impaling clips are attached directly to the wall/frame work/plywood backing with the points extending outward. The spikes are tipped with Stick S7 adhesive. Then the panels are positioned and pressed into place. Technical Parameters Core - Glassfibre
• Fire – Class 1 & P
• Acoustics – NRC up to 0.9
• Climate (OC RH) – 40, 90
• Termite resistance – Yes
• Light reflectance – Colour dependent
• Green (RC %) – 25
• Hygiene (VoC, Clean room) – Low, Class 3
18
-
-
Providing & Fixing premium quality Roller blinds with Serge Ferrari Soltis-96 or Hunter Douglas. Prestress Micro-Aerated Solar protection fabric of high tenacity Polyester Yarn with PVC Coating. Roller Tube: Roller Tube shall be of extruded Aluminium alloy 38mm O.D (or as per system dimension) with a minimum wall thickness of 1.0mm duly anodised for long life.Clutch: Clutch shall be wrap spring design with high strength fibreglass reinforced polyster assembly and high carbon steel springs to transmit motion from driving to driven members of clutch mechanism.Idler: Idler shall be of high strength fibreglass reinforced polyster, consisting of an outside sleeve and centre shaft. Installation Brackets: Brackets shall be of tomised steel powdercoated to give superior finish. Bracket shall accommodate overhead, side or face mounting with clutch assembly on either end of the roller. Bottom Rail: Bottom of the blind shall be provided with aluminium tube powder coated in a colour matching to the fabric. Fabric: Composition: 40% Polyester / 60% PVC, Weight:400 g/m2 (+/-5%), Thickness:0.45 mm (+/-5%), Fabric Openess Factor: 4% , Tensile Strength (Warp/Weft): 220/220 daN / 5cm, Tearing Strength (Warp/Weft): 30/25 daN, Fire Retardancy:M2 (NFP92-507)
58.54
-
-
Providing and fixing box type cupboard (standalone or wall mounting) of 400 mm to 600 (depth of the cupboard) thick with glazed or plywood openable made of 19mm thick BWR plywood (Kitply / Century ply) and laminated with 1mm thick lamination sheet (Greenlam / Sunmica) for all exposed surfaces and using 6mm thick float glass for glazed shutter (Saint Gobain / Modifloat), 12mm BWR plywood for openable shutter with laminate plywood and inner surfaces finished with two coats of enamel paint (Measurement for cupboard Length x Height). Rate inclusive of necessary fixtures for wall mounting, SS fixtures of M/s Ozone make for handle, hinges, tower bolt, magnetic catcher, cabinet / frog hinges of H'a'fele or Ozone make etc., complete.
36.11
-
-
Repairs to Aluminum Joineries: Repairing the aluminum doors, windows and ventilators including charges for replacing damaged sections, pivots, hinges, tower bolts, door stopper, handles, rubber beading, aluminum clips, PVC/ Neoprene felts hooks and eyes, CP brass / SS screws, aluminum snap beading for glazing/ paneling etc complete including charges for lubricating the same after repairs works. (No material will be issued by IITM)
10
-
-
Add extra for providing spacers of 3mm thick for laying ceramic/vitrified tile flooring and grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout with cerafil (Epoxy germ proof joint grout) or equivalent mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Instead of ordinary pointing for the tile 800x800
259.65
-
-
Providing and applying Birla white cement based putty of average thickness upto 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
618.11
-
-
Providing and fixing DORMA Alexa partiton frame 45x29mm series ( EC Version) to fix properly at ceiling and wall side supports for glass partition / glass doors . The rate is including cutting and making good the walls wherever required etc complete.
15
-
-
Dismantling existing ondulit sheet roofing including termal insulation, ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
1200
-
-
Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. Theprofile sheets shall be fixed to truss members in slope or requiredpitch or curvature with Hex cap headed self drilling/tapping Stainlesssteel screws M6, 50 mm long with 3 mm EPDM seal washer etc. allinclusive of labour, scaffolding, T&P and sundries etc. complete asper directions of the Engineer-In-Charge. 0.91 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.
1200
-
-
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.
1200
-
-
Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete :
-
-
-
Precoated/mill finish aluminium Flashings/ Aprons (Upto 600 mm)
90
-
-
Precoated/mill finish aluminium Gutter (600 mm over all girth)
20
-
-
Providing and fixing double scaffolding system (cup lock type) on the Interior side, up to required height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of completion of work.
1750
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
880
-
-
Schedule -B Electrical Works
-
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate,suitable G.I.Box and earthing the point with 1.5 sq mm PVC insulated FRLS PVC insulated copper conductor single core cable etc as required. Group " C "
70
-
-
Wiring for group controlled (looped light point/fan point/exhuast fan/call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core etc. as required. Group " C "
170
-
-
Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required.
-
-
-
2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
200
-
-
2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire
600
-
-
2 x 4 sq.mm + 1 x 4 sq.mm earth wire
200
-
-
Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
3 x 2.5 Sq.mm
5
-
-
3 x 4 Sq.mm
1200
-
-
Supplying and fixing following sizes of steel conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
5
-
-
25 mm
5
-
-
32 mm
5
-
-
Supplying and fixing following sizes of medium class PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
210
-
-
25 mm
1200
-
-
32 mm
5
-
-
Supplying and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 A modular switch, connections, earthing, etc as required.
30
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
15
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.
40
-
-
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6A Switch
30
-
-
15/16A Switch
15
-
-
3 pin 5/6A socket outlet
40
-
-
6 pin 15/16A socket outlet
15
-
-
Supplying and fixing following modular base & cover plate with modular surface/metal boxes etc. as required.
-
-
-
1 or 2 module
30
-
-
3 Module
15
-
-
4 Module
40
-
-
6 Module
15
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
5
-
-
Supply, installation, Testing and Commissioning of Linear 20W 4feet length LED Profile-lights (15 Watt /Metre) for installing in False-ceiling together with requisite driver etc. complete as required.
40
-
-
Supplying and fixing of 12W LED 6500K Recessed mounted ceiling Fitting. (Philips / Havells )
25
-
-
Supply, installation, Testing and Commissioning of Linear LED Strip-lights (5 Watt /Metre) for installing in False-ceiling together with requisite driver etc. complete as required.
10
-
-
Supply, installation, Testing and Commissioning of Linear LED Cove-lights (15 Watt /Metre) for installing in False-ceiling Coves together with requisite driver etc. complete as required.
50
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way , Double door.
1
-
-
12 way , Double door.
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way (4 + 24), Double door
3
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
45
-
-
Supplying and fixing following rating, double pole, 240V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 ADouble pole
1
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
63A
4
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25A
1
-
-
40A
1
-
-
63A
9
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
Supplying and fixing FP sheet steel enclosure on surface/ recess along with 40A/63A 415 V "C" curve FP MCB complete with connections, testing and commissioning etc. as required.
1
-
-
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
For 8 way, Double door SPN MCBDB
1
-
-
For 10 way, Double door SPN MCBDB
1
-
-
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
For 8 way, Double door TPN MCBDB
2
-
-
Supplying of following sizes one number PVC insulated and PVC sheathed / XLPE armoured power cable of 1.1 KV grade conforming to IS:1554/Part-1/1970 of following size on wall /hume pipe/ existing cable tray i/c clamps, saddles, bolt and nuts etc as required.
-
-
-
3 x 6 Sq.mm Cu Arm. Cable
10
-
-
3 x 10 sq.mm Al Arm. Cable
40
-
-
4 x 16 Sq.mm Al Arm. Cable
10
-
-
4 x 16 Sq.mm Cu Arm. Cable
10
-
-
3½ x 25 sq.mm Al Arm. Cable
45
-
-
3½ x 50 sq.mm Al Arm. Cable
12
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3 x 6 Sq.mm Cu Arm. Cable
2
-
-
3 x 10 sq.mm Al Arm. Cable
6
-
-
4 x 16 Sq.mm Al Arm. Cable
2
-
-
4 x 16 Sq.mm Cu Arm. Cable
2
-
-
3½ x 25 sq.mm Al Arm. Cable
6
-
-
3½ x 50 sq.mm Al Arm. Cable
4
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
115
-
-
Above 35 sq.mm and upto 95 sq. mm (clamped with 25x3 MS flat clamp)
25
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
10
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
45
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised iron cable tray "bends" (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
8
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised iron cable tray " Tee" (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
Supply, Fixing of GI/metal 1 compartment raceway with its following accessories should be earthed every 3meters with 2.5sqmm copper wire including floor cutting, fine plastering with chicken mesh, hardwares, Clamps and all other accessories as required as per the site condition for fixing the same. (the proper couplers to be used in between the joining of raceways)
-
-
-
100mm x 50mm single compartmentized Metal Raceways with suitable coupler for jointing, riser & fixing brackets and accessories with all complete as required.
60
-
-
150x150x65mm metal - Floor junction box (socket frame,Junction Box/Floor box with base, flyovers, lid and the disposable cover protection)
15
-
-
Supply & Fixing of Table Mounted Pop-up boxes to be suitable for Slim design for perfect integration into the furniture. To be suitable for modular switch/socket/data outlets. Supplied alongwith installation kits for table topwith. All complete as per specifications, drawings and / or as directed by the Engineer.
-
-
-
8 (2 x 4) modules
30
-
-
Supply and fixing of following sizes of PVC Trunking with cover and its following accessories like joints, end cap, flat angles, Variable internal/external Angle. All complete as per specifications, drawings and / or as directed by the Engineer.
-
-
-
80MM X 50MM (65MM width)
100
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
15
-
-
Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 14G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears as per the following.
-
-
-
Main Panel
1
-
-
Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears.
-
-
-
INCOMER : 200 AMP FP MCCB (From Source 1) 200 AMP FP MCCB (From Source 2) Incomers shall be provided with Electrical & Mechanical Interlocks.All the incomers shall be seperately provided with suitable rating CT upto rated primary current and 5A secondary alongwith Multifunction meter with import/export/net energy recording feature. The MFM's such provided shall be having Modbus/RS485/RJ45 Data connectivity as per the Engineer Incharge.
BUS BAR : 250 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic copper bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.6 amp /sq mm. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature.
OUT GOINGS : 1 No 100A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader Including Indication Lights
5 Nos 63A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader Including Indication Lights 3 No 40 AMP 4P MCB Including Indication Lights 1 No 63 AMP 4P MCB Including Indication Lights (First floor Power DB)
3 Nos of Spare Compartment in complete panel as above with suitable copper earth flat. Panel GA drawing should be got approved before supply. 4 Nos of 40 AMP DP MCB Including Indication Lights
-
-
-
Supply and erection of 3 Phase input - 1 Phase out, 15 kVA 3P -n 3P out UPS with suitable BCB (battery circuit breaker), filters, SMF battery bank, with 30minutes backup. The items including necessary safety features, protections/relays, necessary battery racks, cables/wires and fixing accessories etc.
1
-
-
Supply and erection of 1 Phase, 230 V, 2 kVA 1P -n 1P out UPS with suitable BCB (battery circuit breaker), filters, 16 nos. 12V 26Ah SMF battery bank, with 30minutes backup. The items including necessary safety features, protections/relays, necessary battery racks, cables/wires and fixing accessories etc.
1
-
-
Providing and fixing 25mm x 5 mm CU strip on surface or in recess for connections etc. as required.
5
-
-
Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required.
40
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required..
15
-
-
Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.
-
-
-
ABC powder type fire extinguisher of 4 Kgs. Capacity, with initial filling (Mono Ammonium Phosphate Powder 90) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS:15683. (ABC Dry Chemical Powder- MAP 90%)
4
-
-
Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas as per IS 15222 with controll discharge mechanism fitted with Hose & Horn applicable on Class B fire rating 21B confirming to IS: 15683.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%