Indian Institute Of Information Technology Design And Manufacturing Tender

Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shadecomplete. Make:Somany/Kajaria/Johnson

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Make:Sintex/Rajshri/Plasatiwood

Non decorative finish

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. Make:Crown/ISI.

150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. Make:Crown/ISI

100 mm

Painting with synthetic enamel paint of approved Brand and manufacture of required colour to give an even shade. Make:Asian Paints/Nerolex/Berger.

Two or more coats on new work

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. Make:Asian Paints/Nerolex/Berger.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item). Make:Saint Gobain/Modiguard

Float glass panes of nominal thickness 8 mm (weight not less than 20kg/sqm)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of serviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Make:Parryware/Metro/Supreme.

Providing and fixing brass long body bib cock of approved quality : Make:Parryware/Metro/Supreme.

15 mm nominal bore

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Make:Jindal/Hindalco

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. Make:Centuary/Kitply/Greenply.

30 mm thick

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing CP brass , push cock metro make including cp brass urinal spreader and CP brass connection disembering old urinal sensor system and making good the same etc., Make:Parryware/Metro

15 mm nominal bore

Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete :Make:Parryware/Metro

White solid plastic seat with lid

Providing and fixing CP brass hand shower Metro or equivalent (health faucet ) with 8 mm dia 1 mtr long flexible tube and Wall hook all as per Direction of Engineer -in-Charge. Make:Parryware/Metro

Providing and Fixing C.P. Brass manually operated flush valve 25mm Jaquar (Non-sensor) CODE :FLV1095N for EWC by dismantled the existing sensor system of flush valve including cutting ceramic tile dado upto 30x30cm and using CPVC pipes and fittings such as CPVC reducer, CPVC MTA including wall cement plaster 1:4 ( 1 cement 4 coarse sand) with wall painting etc. Make:Parryware/Jaquar

Existing Repair work in Rainwater Pipe connection (Including Required fittings and solvent) all as per Direction of Engineer -in-Charge.

Providing and fixing C.P. brass two way bib cock Metro or equivalent of approved quality conforming to IS standards and Specification. Make: Metro / parryware