Hindu Religious Institutions And Charitable Endowments Tender

Random Rubble masonry work in Gembination Mortor1:45 (One of cement and five of M-sand) Using selected stones and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications. The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.

Providing and laying position, Standardised concrete mi M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard brocken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55, inculding admiture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of M-sand, but eculding cost of reinforcement grill and fabricating charges, centering and shuttering and also inculding laying, vibrating with mechanical vibrtors, finishing, curing, etc, complete complying with standred specification and ass directed by the departmentel officers.the coarse and fine aggregates to be used shoul comply with the requirments of IS standreds. (No separate payment will be made by the Department for the excess usage of materials.)

Centering for sides and soffits of Rcc slabs of plain surface like lintels, beams, etc., including strutting 3M hight using MS sheets of size 90cmx60cm and BG 10 stiffened with MS angles of size 25x25x3mm laid over silver oak (C.W) joists of size 10x6.5cm (spaced at about 90cm c/c) and supported by casurina prop. 10cm to 13cm dia (spaced of 75cm c/c) complying with standard specification and directed by the Dept, Officers. 10sqm

Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and Other Temple Structures upto 10 feet length.

UBANAM ALL ROUND,KANDAM ALL ROUND,PATTIYAL ALL ROUND,STEP STONE, STEP SIDE SURUL PADI, THANI THUN(stone piller), THANI BOTHIYAL (side),KODUNGAI, VIYALM pavugal UP TO 10 FEET both end bay,THANI UTHIRAM UP TO 10 FEET east & west side end bay

THANI UTHIRAM ABOVE 10 FEET UP TO 14 FEET north&south side centre bay, pavukal ABOVE 10 FEET UP TO 14 FEET,

Labour charges for cut stone palamunai dressing excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position etc complete.,

UBANAM ALL ROUND

KANDAM ALL ROUND

PATTIYAL ALL ROUND SIDE AND TOP

STEP STONE

STEP SIDE SURUL PADI

THANI THUN (piller)

THANI BOTHIYAL

THANI UTHIRAM UP TO 10 FEET

THANI UTHIRAM ABOVE 10 FEET UP TO 14 FEET

KODUNGAI

VIYALAM

pavugal UP TO 10 FEET

pavugal ABOVE 10 FEET UP TO 14 FEET

Brick masonry Cement Mortar-4:4 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam/gopuram

Providing Vargapoochu over the corewalls of Vimanams/Gopurams, with Gement Mortar complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by ermbedding broken bricks of shaped/chiseled bricks, rough-plastering with Cement Mortart and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in CM 1:1:3 finishing the same with CM 1:1:3 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theerval wherever necessary. Inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder

Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Supplying fabrication and placing in possition of MS or RTS bars for all RCC works including cutting bending and placing in position and also the cost of binding wire also etc., complete. (SS NO-134)

Sub Total

GST @ 18%