Hindu Religious Institutions And Charitable Endowments Tender

Supply and fixing of Vertical type IP43 Double Door DB 6 way, 18 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, Triple Pole & Neutral 63A, 10KA and and Cable Adopter Boxes with 63A 4 Way RCCB 100mA incoming and,5 Nos 32A TP MCB and3 Nos 32A SP MCBs are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

GST 18%

Supply and fixing of Vertical type Hager IP43 Double Door DB 8 way, 24 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, and Cable Adopter Boxes Triple Pole & Neutral and with125 Amps Four Pole MCCB ( L&T : DZ1F0125DXD1A) with UV release module for DZ1 Module CM90031BOOO as incoming and, 8 Nos 63 Amps Triple Pole MCCB ( L&T : CM87894ooJ2) are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and fixing of Vertical type IP43 Double Door DB 4 way, 12 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, Triple Pole & Neutral and with 160 Amps Four Pole MCCB as incoming and, 4 Nos 63 Amps Triple Pole MCCB ( L&T : CM87894ooJ2) are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and fixing of 65mm (2-1/2") GI Tubular Pole of 6 metre Length Double Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 2 nos of 6A SP MCB, 2/4 connector on suitable hylem sheet and supply and fixing of 2 Nos 48W LED street light (Higher end) fitting with LED and SMC box with PVC unsheathed copper leads from SMC box to the fitting with necessary connection.

Design, Supply , Testing and commissioning of 10 Meters Mini mast lighting unit Bajaj Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met/sec wind Velocily and above. The Mini mast structure should have hend hence. Single ring and provided with galvanized lantern carriage suitable for and with 4 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung &feeder pillar Box with Automatic timer system including wiring etc, Erection of the High Mast by providing Concreting 1:2:4 Mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestal with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T /M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor plate & Tmeplate etc. complete as per standard specification of IS - 875-1987.

Supply, erection, testing and commissioning of 800A draw out type floor mounted MV cubical panel board 16 SWG MS Sheet of size 21 Feet x 6 feet x 3.3 Feet to Accommodate 12Nos Switches and one no Instrument Panel bus bar chamber dust and vermin proof and accommodating the following with Thermal Magnetic Release MCCB’s and 2 Nos. ACB as Incomer units , with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4Nos.2Runs 2” X 1” tinned copper bus bar for 3 phases and neutral (2x 50mm x 12mm) and 2 Nos. of ear thing bus of size 1” X 1/4 tinned copper bus (25mm x 3mm) on suitable bus bar insulator(Epoxy insulator) with maximum creep age distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set. Incoming 1)Supply and fixing of 2 No. 800A 4 pole 50 ka , microprocessor based, EDO/MDO breaker 433V LT ACB confirming to IS 13947–2 IEC 60947–2 with suitable capacity with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with Micro processor Based SR 18 G relay, over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mold base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE rules in force with inter connection and terminations as required in specification. (For full specification is see annnexuare IV of this Tender condition)

Supply and Erection of Automation Panel comprising of Bus Bar Chamber of 16 SWG MS Sheet of size 6 Feet x 6 feetx 3.3 Feet to Accommodate 12Nos Switches and one no Instrument Panel with Copper bus bar for 400A 3 ph and neutral 2 x ¼ ” and Copper bus ( 1” X 1/8”) for earth connection all around the panel board with supply and fixing of AMF with load management Control Unit-2 nos, including charges for Labour Charges for Load Management system with Digital L&T make multifunction meter cat No: WL440531OOOO, with 6 mm thick hylem sheet separation for switches to bus bar interconnection. and Control wiring using 4.0 sqmm Copper wire for automation and painting with One coat of red oxide and 2 coats of synthetic spray paint and Superscribing with suitable colour paint, the name of the location of feeding, size of the cable, capacity of the switches and bus bar chamber including Transport Charges. (For full specification is see annnexuare IV of this Tender condition)

Supply and installation of 200 KVAR automatic power factor corrector cubical panel board 12 stage fabricated out of 16 SWG CRCA MS sheet with the following component specification, which can be operated in both Auto and Manual type. Power factor control relay from KIK Tronics, microprocessor based power factor control relay with 12 segment with LED display, 4 quadrant measurement, Non-volatilememory, current path x amps / 5A with Three phase (C.T) measuring system. Capacitors EPCOS from SIEMENS Phi cap AC capacitors is a reliable MPP Delta connected in Three phase 440V, 50 HZ inrush current 100 * 1 N (ND). The stages designed based upon load capacity are minimum 5 x3, 7.5 ,10 x 2, 12.5 x 1, 15 and 4 x 20 KVAr, with necessary duty contactor L& T make of 230V, 50HZ coil with 4 No. and required capacity of MCB 3 pole, 15KA, curve. The main incomer will be MCCB 400 Amps,. Also the panel includes necessary copper bus bar terminal, power wiring and sensing wiring in suitable flexible PVC hose, Phase indicator neon lamp LED indicator for the capacitor bank selected and current Transformer of Class 1,660V, 50HZ 5 KV & 600/5 Ratio. The whole set of components are assembled in a powder coated metal sheet box with cooling FAN and fixing the automatic power factor correction panel board made up of suitable angle iron frame work rigidly fixed on wall. Make. (Matrix or equivalent )

Construction of 300MM x300MM cubical Post for the Height of 40 Feet comprising the following. 1) Concreting at Floor for the Size of 1.05 Mt x 1.05 Mt x1.5 Mt Depth. (4Feet under ground) 2) Fabrication of Cuboid by 50MM x 50MM x6 MM MS Angle formed like Square by interconnecting tangentially by 12MM MS Round Rod. 4) Providing Support flats Using 50MM x 6 MM MS Flat with equal Distance of 2 feet and Additional Flat should also to be provided near the Successive Flats. 5) A size of 450MM x 450 MM x18 MM Thick Base Flange should be provided at the bottom for fixing the Entire Post on Concrete Base using M25 Foundation Bolts. 6) An Intermediate Joint should also to be Provided with 450MM x450MM x18 MM Joint Section Plates to interconnect the post extention. 7) A Side wall Support should also to be provided to avoid cantilevering due to excess wind Pressure. Entire Post Should have necessary MS Clamps for holding the Cables.

Supply and fixing of 65mm dia GI pipe (Class 'B') of 2.5 Feet length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with SMC Outdoor box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing 1 No 48W LED street light fitting with LED (Higher end) and necessary accessories with complete set and 32mm dia GI Pipe (class B) 2 Ft for fixing Street light with supply and fixing of 16A fuse unit, (500V), 5A SP switch inside the SMC box and painting with suitable colour.

Supply, erection, testing and commissioning of 400A Enclosed ATS, Frame 4, 400A CK90166B SOO L&T make with enclosure version with Mounting Anchor Bolts with cement Packing for mounting with Necessary Connection

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet 5.5(L)x 4’(H) x 1.5’(W) with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil, with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. With the following Switches. Incoming: 200 Amps Four Pole MCCB ( L&T : DN2-250D CM92109OOP1OG) – 1 No. Outgoing: 1. 125 Amps Four Pole MCCB ( L&T : DZ1 F0125 DXD1A) -- 2 Transport Charges. (For full specification is see annnexuare IV of this Tender condition)

Supply, erection, testing and commissioning of 800Aa draw out type floor mounted MV cubical panel board of size 10 Feet x 6 feet x 3.3 Feet to Accommodate 5Nos Switches and one no Instrument Panel and bus bar chamber dust and vermin proof and accommodating the following with Thermal Magnetic Release MCCB’s and1 No. ACB as Incomer units , with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4Nos.2Runs 2” X 1” tinned copper bus bar for 3 phases and neutral (2x 50mm x 12mm) and 2 Nos. of ear thing bus of size 1” X 1/4 tinned copper bus(25mm x 3mm) on suitable bus bar insulator (Epoxy insulator) with maximum creep age distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set Incoming 1)Supply and fixing of 1 No. 800A 4 pole 50 ka , microprocessor based, EDO/MDO breaker 433V LT ACB confirming to IS 13947–2 IEC 60947–2 with suitable capacity with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with Micro processor Based SR 18 G relay, over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay.

Supply and fixing of Vertical type IP43 Double Door DB 4 way, 12 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, and Cable Adopter Boxes with Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA incoming and,4 Nos 32A TP MCB are Outgoing, on wall with Suitable Angle iron Frame Work and Triple Pole & Neutral and with Four Pole 100A, 25KA MCB as incoming and, 4 Nos 63 A TP MCB are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and fixing of Vertical type IP43 Double Door DB 4 way, 12 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, and Cable Adopter Boxes with Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA incoming and,4 Nos 32A TP MCB are Outgoing, on wall with Suitable Angle iron Frame Work and Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA Hager CE463Y incoming and, 2 Nos 32A TP MCB and 6 Nos 32A SP MCBs are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and fixing of Vertical typeIP43 Double Door DB 4 way, 12 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, and Cable Adopter Boxes Triple Pole & Neutral and with 125 Amps Four Pole MCCB ( L&T : DZ1F0125DXD1A) with UV release module for DZ1 Module CM90031BOOO as incoming and, 4 Nos 63 Amps Triple Pole MCCB ( L&T : CM87894ooJ2) are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)

Supply and fixing of Vertical IP43 typeDouble Door DB 8 way, 24 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, abd and Cable Adopter Boxes Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA incoming and,3 Nos 32A TP MCB and 12 Nos 32A SP MCBs are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legran/Hager L &T make)

Supply and fixing of Vertical type IP43 Double Door DB 4 way, 12+12 modules triple pole neutral MCB distribution board with Metal/Acrylic Door cover, and Cable Adopter Boxes with IP42 Protection, Double Pole 40A, 10KA ( M-1778 ) as incoming and,2 Nos 32A TP MCB and 6 Nos 32A SP MCBs are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand / Hager L &T make)

Supply and fixing of 12 way IP54 Double Door DB 12 way, 12 modules MCB sheet steel enclosure distribution board with 1No 32A DPMCB as incoming with 40 Amps 30 MA DP RCCB and 10 Nos 6Amps to 32Amps SPMCB outgoing concealed in Wall with earth connection only.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet 5.5(L)x 4’(H) x 1.5’(W) with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil, with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. With the following Switches. Incoming: 200 Amps Four Pole MCCB ( L&T : DN2-250D CM92109OOP1OG) – 1 No. Outgoing: 1. 125 Amps Four Pole MCCB ( L&T : DZ1 F0125 DXD1A) -- 2 Nos. 2. 63 Amps Triple Pole MCCB ( L&T : CM87894ooJ2) -- 6 Nos 3. MFD WL440510OOOO 3 Line Meter with 6 mm thick hylem sheet separation for switches to bus bar interconnection. and Control wiring using 4.0 sqmm Copper wire for automation and painting with One coat of red oxide and 2 coats of synthetic spray paint and Superscribing with suitable colour paint, the name of the location of feeding, size of the cable, capacity of the switches and bus bar chamber including Transport Charges.

Supply , Erection Testing and commissioning of 415V/50 HZ 200A Cubicle panel of size 5.5(L)x 4’(H) x 1.5’(W) board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. With the following Switches. Incoming: 200 Amps Four Pole MCCB ( L&T : DN2-250D CM92109OOP1OG) – 1 No. Outgoing: 1. 63 Amps Triple Pole MCCB (For full specification is see annnexuare IV of this Tender condition)

Sub total

Supply and Erection of Automation Panel comprising of Bus Bar Chamber of 16 SWG MS Sheet of size 6 Feet x 6 feetx 3.3 Feet to Accommodate 12Nos Switches and one no Instrument Panel with Copper bus bar for 400A 3 ph and neutral 2 x ¼ ” and Copper bus ( 1” X 1/8”) for earth connection all around the panel board with supply and fixing of AMF with load management Control Unit-2 nos, including charges for Labour Charges for Load Management system with Digital L&T make multifunction meter cat No: WL440531OOOO, with 6 mm thick hylem sheet separation for switches to bus bar interconnection. and Control wiring using 4.0 sqmm Copper wire for automation and painting with One coat of red oxide and 2 coats of synthetic spray paint and Superscribing with suitable colour paint, the name of the location of feeding, size of the cable, capacity of the switches and bus bar chamber including Transport Charges. (For full specification is see annnexuare IV of this Tender condition)

Supply and fixing of Vertical type IP43 Double Door DB 4 way, 12 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover with IP42 Protection, and Cable Adopter Boxes Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA incoming and,4 Nos 32A TP MCB are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legran/Hager L &T make) (Street Light)

Supply and fixing of Vertical type IP43 Double Door DB 6 way, 18 +12 modules triple pole neutral MCCB distribution board with Metal/Acrylic Door cover, and Cable Adopter Boxes with IP42 Protection, Triple Pole & Neutral 63A, 10KA and with 63A 4 Way RCCB 100mA incoming and,4 Nos 32A TP MCB and 6 Nos 32A SP MCBs are Outgoing, on wall with Suitable Angle iron Frame Work and making good of the portion with earth connection only.The MCB DB and MCB’s should be with ISI mark.(Like Legrand /Hager L &T make)