Hindu Religious Institutions And Charitable Endowments Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Hindu Religious Institutions And Charitable Endowments - HRICE Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Jun 2024
Closing Date24 Jul 2024
Tender Amount₹ 36,89,76,298
Costs
EMD
₹ 18,55,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HRCE_456815_1Bid Award Id
ViewTender No
3401Tender Authority
Hindu Religious Institutions And Charitable Endowments ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
5780
-
-
Earth work Open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
6829
-
-
Supplying and filling basement with Conveyed earth from 10 KM lead
2667
-
-
Supplying and filling in foundation, basement, etc with filling M - Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
1805
-
-
Supplying and filling in foundation, basement, etc with filling Gravel in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
1572
-
-
Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MORTH Specification- for Grading- III
715
-
-
Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
7653
-
-
Supplying and filling with 40mm size brick jelly including cost and conveyance of all materials and all labour charges for filling etc complete complying with standard specification.
7
-
-
Cement Concrete 1:5:10 (one cement five C.S.Sand (M.Sand) and ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curingetc.,complete complying with standard specification and as directed.
721
-
-
Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
218
-
-
Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.[For Core Wall],
185
-
-
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg / m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerete, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730kg. of 20mm machine crushed stone jelly and with about (3.3cu.m.) 5156kg. of 10-12mm machine crushed stone jelly and with about (4.79cum.) 7670kg of C.S.Sand (M.Sand), but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and aiso including laying,virabting with mechanical vibrators, finishing, curing,etc. and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary
-
-
-
Foundation & Basement
1292
-
-
Ground Floor
1214
-
-
In First Floor
335
-
-
In Second Floor
181
-
-
In Third Floor
25
-
-
Providing and laying in position,standardlised Concrete Mix M-30 Grade in accordance with Is456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser/superplasticiser) in recommended proportions as per Is:9103 to accelerate,retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.)7730kg. of 20mm machine cursed stone jelly and with about (3.3cu.m.)5156kg. of 10-12mm machine curshed stone jelly and with about (4.79cu.m.)7670kg.of sand,but excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc., and providing fixtures like fan clamps in the RCC floor/roof
-
-
-
Foundation & Basement
2350
-
-
Ground Floor
26
-
-
In First Floor
22
-
-
In Second Floor
58
-
-
In Third Floor
30
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (For Footings and Grade Beam etc.,)
7700
-
-
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
15516
-
-
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.Columns
coloumn upto 3.29 m height
4627
-
-
coloumn from 3.29 m upto 4.29 m height
104
-
-
coloumn from 4.29 m upto 5.29 m height
26
-
-
coloumn from 5.29 m upto 6.29 m height
24
-
-
coloumn from 6.29 m upto 7.29 m height
24
-
-
coloumn from 7.29 m upto 8.29 m height
134
-
-
coloumn from 8.29 m upto 9.29 m height
24
-
-
coloumn from 9.29 m upto 10.29 m height
24
-
-
coloumn from 10.29 m upto 11.29 m height
24
-
-
coloumn from 11.29 m upto 12.29 m height
34
-
-
coloumn from 12.29 m upto 13.29 m height
6
-
-
coloumn from 13.29 m upto 14.29 m height
6
-
-
coloumn from 14.29 m upto 15.29 m height
10
-
-
Centering for curved surfaces of all RCC items of work
Curved surface from 11 to 12m height
154
-
-
Curved surface from 12 to 13m height
96
-
-
Curved surface from 13 to 14m height
94
-
-
Curved surface from 14to 15m height
188
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
5361.1
-
-
Brick work using country bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:5 (one cement and five C.S.Sand (M.Sand) ) for the following including finishing and curing as directed by the departmental officers etc., complete complying with standard specifications.(Foundation & Basement)
504
-
-
Brick work in CM 1:6 (one cement and six sand) using best quality of III class Country Bricks of Size 83/4"x41/4 "x23/4" for Super Structure., complete as per standard specification.
-
-
-
Ground Floor
890
-
-
First Floor
415
-
-
Second Floor
306
-
-
Third Floor
70
-
-
Brick partition walls using best quality using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
Ground Floor
631
-
-
First Floor
516
-
-
Second Floor
200
-
-
Random Rubble Masonry in Lime mortar 1:2 [One lime and Two sand] using new hard granite stones including providing new bond stones wherever necessary including simultaneous flush pointing of the exposed surface above ground level with the same mortar and all incidential charges such as scaffolding, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification. complying with the standard specification.
-
-
-
Foundation and basement
605
-
-
G.F & S.S
660
-
-
Labour charge for Fixing of Old Stone in Thirumathil wall and all incidential charges such as, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification.
3297
-
-
Supplying cut stones of various sizes 1.20 to 1.80 x 0.23 x 0.30 including loading and unloading tranportation charges etc.complete complying with standard specification.
236
-
-
Fixing of New cut stones of various sizes 1.20 to 1.80 x 0.23 x 0.30 including loading and unloading tranportation charges etc.complete complying with standard specification.
1027
-
-
Providing two legged scaffolding using suitable sizse of casurina posts of 1.50cm over all length of 3m height + 0.50m lap) The distance between the two rows being 2m and the spacing of posts being 2m in both rows with two horizontal posts with 0.50m over lap on either side and braces at 2m C, including longituditional and tranware middle of 40mm thick and 1m width etc. in complete shape using coir and nails and as directed by the departmetal officers.
935
-
-
Brick work in Lime mortar 1:2 (One Lime : Two Sand) using best quality chamber bricksof size 9" x 4 3 /4"x 2 1/4" for walls incluing cost and convetance of all labour andmaterials including scaffolding curing finishingetc., complete complying with standard specification and as directed.etc., complete
-
-
-
Ground Floor
275
-
-
First Floor
125
-
-
Plastering with Lime mortar 1:1.5 (One Lime : One and half Sand) 12mm thick including all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
2500
-
-
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
21409
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
4752
-
-
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
1844
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
263
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
2804
-
-
Supplying and laying of Interlocking Paver Block Stone 80mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,
18825
-
-
Paving the Flooring with Joint free Rectified Glazed Ceramic Flooring Tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
576
-
-
Paving the floor with best quality Double charged Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
2517
-
-
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
70
-
-
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
236
-
-
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
20
-
-
Flooring with Snow White Marble Slab (Adanga) of size 600mm x 600 and 18mm to 20mm thick and above free from all defects in all floors over a base layer of CM 1:3, 20mm thick. The marble slab shall be laid over the cement mortar by applying white cement slurry in between base mortar and marble slab and pointed with white cement neatly including polishing with polishing stone and oxalic acid etc. so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The marble slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete.
255
-
-
Paving the Flooring with Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
1166
-
-
Dadooing walls with following best approved quality of printed design colour glazed tiles of size 300 x 450 x 8mm thick in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
2244
-
-
Manufacturing supplying and fixing in position of Teracotta jally 20x20x5cm thick approved quality and design in cement slurry including cost of materials labour curing lifting fixing in position etc, complete complying with standard specification and as directed by the departmental officers in all floors.
44
-
-
Supplying and erecting pull and push type Rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
61
-
-
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.
3640
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
10073
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
15480
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
439
-
-
Metal Roofing Works by Galvalume Colour Sheet of size 0.47mm
240
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that
395
-
-
Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
330
-
-
supply and installation of Anodised Aluminium wide line frame of minium size 100x25 mm to a height of 2100 mm maximum with proprietary aluminium anodised frames all around the with acoustic door seals necessary wood inserts and rebate. The profile shall be matt natural anodised the profile manufacture to supply all the necessary clips, seals and fixing accessories for the system. all profile to be with 2mm guage thickness execluding 20 microns of anodizing. Rate to include all the works mensioned above including necessary accessories for fixing anodised Aluminium back capping to suit the partition width complete, working at al level and heights and as directed by the departmental officer
646
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
45
-
-
Supplying and fixing fine Polished Cuddapah slab of following thickness 20 / 30 mm for cup-board arrangements including laying to correct alignment with cement mortar 1:3 and black powder etc, complete complying with standard specification and as direct.
285
-
-
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
20
-
-
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia
109
-
-
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
119
-
-
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
119
-
-
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
2
-
-
Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
20mm dia Pipe For water supply
990
-
-
25mm dia Pipe
426
-
-
32mm dia Pipe
140
-
-
Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
-
-
-
20mm conceled Coupler
494
-
-
25mm dia Coupler
213
-
-
32mm dia Coupler
70
-
-
20mm conceled Elbow
494
-
-
25mm dia Elbow
213
-
-
32mm dia Elbow
70
-
-
20mm conceled BEND
494
-
-
25mm dia BEND
213
-
-
32mm dia BEND
70
-
-
20mm conceled Tee
494
-
-
25mm dia Tee
213
-
-
32mm dia Tee
70
-
-
20mm End Cap
494
-
-
25mm dia End Cap
213
-
-
32mm dia End Cap
70
-
-
20 x 15mm Reducer
494
-
-
25 x 20mm Reducer
213
-
-
32 x 25mm Reducer
70
-
-
20 x 15mm Reducer Tee
494
-
-
25 x 20mm Reducer Tee
213
-
-
32 x 25mm Reducer Tee
70
-
-
20 x 15mm Reducer Elbow
494
-
-
25 x 20mm Reducer Elbow
213
-
-
32 x 25mm Reducer Elbow
70
-
-
25mm dia Jet Nipple
336
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid Below ground level
-
-
-
160mm dia Pipe
356
-
-
110mm dia Pipe internal drainage
914
-
-
75mm dia Pipe
746
-
-
63mm dia Pipe
80
-
-
50mm dia Pipe
197
-
-
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
110mm Pipe Door Elbow
28
-
-
110mm Pipe Elbow
174
-
-
75mm Pipe Elbow
235
-
-
50mm Pipe Elbow
33
-
-
110mm Pipe Tee
190
-
-
75mm Pipe Tee
215
-
-
50mm Pipe Tee
33
-
-
110mm Pipe Bend
166
-
-
75mm Pipe Bend
215
-
-
50mm Pipe Bend
33
-
-
110mm Pipe "Y"
166
-
-
75mm Pipe "Y"
215
-
-
50mm Pipe "Y"
3
-
-
110mm x 75mm Reducer
202
-
-
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.
101
-
-
Construction of sewer chambers of internal dimension of 600x600mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.
67
-
-
Construction of sewer chambers of internal dimension of 600x750mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.
31
-
-
Construction of sewer chambers of internal dimension of 600x900mm depth upto 1.2 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.
30
-
-
Supplying and fixing of stainless steel sink of size 1200 x 550 x 180 mm using SS 304 grade including cost and conveyance of all materials and all labour charges etc complete.
22
-
-
Supplying and fixing in position best quality approved stainless steel sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
36
-
-
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without Pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
102
-
-
Supplying and fixing CP Two Way Bib Cock with Health Faucet with flow Rate of 3.78 LPM at 3 Bar pressure including flexible hose 1m/1.2m long connection and holder for hand spray ,making good the same, complete.of Engineer-in-charge.
102
-
-
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
107
-
-
Supplying and fixing in position SS Swan Neck Tap suitable with kitchen sink etc. complete complying with standard specification.
84
-
-
Supplying and fixing in position Indian make Bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
124
-
-
Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
141
-
-
Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
14
-
-
Supplying and fixing of M.S angle iron grill Door of approved design for open courtyard, grill work to window openings without shutter etc., using necessary mild steel flats for inner and outer members with MS angle etc. complete complying with standard specification.
15045
-
-
Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter (with frame)
279
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. (110mm Dia)
415
-
-
Supplying and fixing in position best quality P.V.C rainwater burried pipe (4 kg. per sq.cm) of various sizes having ISI mark and providing leakproof joints including fixing to the chamber with P.V.Cspecials etc., and making connection to all rain water chambers, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.(110 mm Dia)
379
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
16
-
-
Supplying and fixing in position C.P.Shower rose - 100mm dia & CP Wall Mixture Tap 3 in 1 system with Hand Showers of approved make confirming to IS specifications and qulity including cost of Shellac thread etc. complying with standard specification.
93
-
-
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
100mm dia
720
-
-
65mm dia
65
-
-
50mm dia
740
-
-
80mm dia
70
-
-
40mm dia
100
-
-
25mm dia
100
-
-
20mm dia
42
-
-
Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
-
-
-
20 mm Dia Elbow
30
-
-
25 mm Dia Elbow
20
-
-
50mm Dia Elbow
292
-
-
40mm Dia Elbow
6
-
-
65mm Dia Elbow
33
-
-
80mm Dia Elbow
35
-
-
50mm Dia Bend
240
-
-
20 mm Dia Tee
20
-
-
25 mm Dia Tee
20
-
-
50mm Dia Tee
292
-
-
40mm Dia Tee
6
-
-
65mm Dia Tee
33
-
-
80mm Dia Tee
35
-
-
20 mm x 15 mm Dia Reducer
50
-
-
40 mm x 32 mm Dia Reducer
8
-
-
50mm Dia Coupler
292
-
-
40mm Dia Coupler
6
-
-
65mm Dia Coupler
33
-
-
80mm Dia Coupler
35
-
-
15mm dia SS Heavy duty Long Body Tap
48
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. the Executive Engineer before use on work.
-
-
-
25mm dia
92
-
-
40mm dia
3
-
-
65mm dia
17
-
-
50 mm dia
37
-
-
Supplying and fixing of approved make of GM Non return valve, suitable for both horizontal & vertical application conforming to BS 1982 tested to a pressure of 15 Kg/sqcm. Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-Incharge.
-
-
-
65mm dia
6
-
-
50mm dia
2
-
-
40mm dia
1
-
-
Supplying and fixing of PVC water tank including cost,convayance and all labour charges requirred for lifting and fixing in position etc.,complete
4000
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance,welding charges, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers.
242
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steelpipe of 1.60mm thick at required locations to a height of900mm from finished floor level welded to 38mm diaStainless Steel pipe post of 1.00mm thick as vertical at900mm centre with 2 Nos. of 25mm dia intermediatehorizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mmMS base plate encased in the base concrete. The rate isinclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete complying with standard specification and as directed by the departmental officers.
77
-
-
Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.
38
-
-
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
8
-
-
Supplying and fixing in position SFRC manhole covers frames (Heavy duty) of size 60cm round shape of best approved quality as per standard specification etc., complete compying with standard specifications
115
-
-
Supplying and fixing in position SFRC manhole covers with frames (Heavy duty) of size 75cm x 75cm of best approved quality as per standard specification etc., complete compying with standard specifications
12
-
-
Suppling and fixing in position of enamel water level indicator with all accesseries of approved pattern and design etc complete as standard specification
2
-
-
Supplying and fixing Rcc M30 concrete for Rcc hand rails
82
-
-
Rcc post 0.90m h above the roof slab
40
-
-
Construction of percolation well / rain water harvest pit of of required internal dimension of 1.2mtr Dia upto 2.5 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement, With perforated RCC cover, fixed over 100 mm P.C.C, Rungs, etc. The work shall include necessary exacavation and backfilling placing 2 nos of 160mm dia slotted pipe for 5mtr from the bottom of the catch pit, 25mm coarse aggregate (black pebbles) for filteration.
21
-
-
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
23
-
-
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
4
-
-
Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessray brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. (65mm Dia)
160
-
-
Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level
-
-
-
50 mm dia pipe
300
-
-
65 mm dia pipe
180
-
-
80 mm dia pipe
24
-
-
Supplying and fixing in position GI unions of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete complying with standard specifications. (The GI unions should be got approved by Executive Engineer before use on works).
-
-
-
50 mm dia
10
-
-
65 mm dia
6
-
-
Supplying and fixing in position the following GI Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.)
-
-
-
50 mm dia Elbow
30
-
-
65 mm dia Elbow
30
-
-
50 mm dia Tee
20
-
-
65 mm dia Tee
20
-
-
50 mm dia Coupling
90
-
-
65 mm dia Coupling
175
-
-
Supplying laying and jointing C.I pipes with socket & spigot soil/ waste pipes of approved quality and best variety (Class A) conforming to IS - 1536 mark, of the following sizes including cutting , Fixing to specials using rubber gasket jointing but excluding cost of such specials and fixing to the pipes shall be duly laid at site, with necessary cutting & jointing of pipe with approved quality jointing lubricant. The pipes shall be fixed properly aligned and laid to slope. Before handing over, leak test shall be carried out and any defects found shall be rectified. Work shall also include necessary excavation and back filling 'with compaction etc, as directed by Engineer- Incharge (For sewer and Sullage line)
-
-
-
250mm dia Pipe
1658
-
-
350mm dia Pipe
582
-
-
Multi-Purpose Steam Boiler (Fire Wood Model)Steam and Water Capacity: 350 Liters Steam Production: 60 to70 Liters water evaporates in 1 hour For 1 hour steam produces is 5-Kg Inner Chamber: It is fabricated with 8mm Thick MS Plate.Outer Chamber: It is fabricated with 6mm Thick MS Plate.Inner Tank: It is fabricated with 2mm Thick Salem Stainless Steel Sheet 304 Grade.
2
-
-
Rice Cooking Vessel Fully SS 304 Grade Capacity: 25-Kgs Inner body: It is fabricated with 2mm Thickness Salem Stainless Steel 304 Grade Provided.Bottom plate: 100mm distance of the bottom plate for effective Filtration of khanji bottom plate with ball valve Fitted in the 1" drainage nozzle Provided.Handle: Salem Stainless Pipe Tilting handle 25mm Dia & Locking arrangements Provided.Bottom: SS Perforate sheet welded and it is double jacketed Provided.Attachment: Cleaning nipple, steam inlet, drain pipe, wheel valve Provided. Side arms: Dia-65mm SS Support rod & steam inlet connection Flanges (male & female) will be made out of thick SS Plates Provided.Lid: 1.2mm Stainless Steel Sheet 304 Grade Provided.Mounted on: 2" SS Tubular stand Provided.
4
-
-
Rice Cooking Vessel Fully SS 304 Grade Capacity: 20-Kgs Inner body: It is fabricated with 2mm Thickness Salem Stainless Steel 304 Grade Provided.Bottom plate: 100mm distance of the bottom plate for effective Filtration of khanji bottom plate with ball valve Fitted in the 1" drainage nozzle Provided. Handle: Salem Stainless Pipe Tilting handle 25mm Dia & Locking arrangements Provided. Bottom: SS Perforate sheet welded and it is double jacketed Provided. Attachment: Cleaning nipple, steam inlet, drain pipe, wheel valve Provided.
Side arms: Dia-65mm SS Support rod & steam inlet connection Flanges (male & female) will be made out of thick SS Plates Provided.
Lid: 1.2mm Stainless Steel Sheet 304 Grade Provided.Mounted on: 2" SS Tubular stand Provided.
4
-
-
Double Jacket Dhall Vessel Fully SS 304 Grade
Capacity: 75-L Inner body: It is fabricated with 2mm Thickness Salem Stainless Steel 304 Grade.
Bottom plate: 100mm distance of the bottom plate for effective Filtration of khanji bottom plate with ball valve Fitted in the 1" drainage nozzle Provided. Handle: Salem stainless pipe tilting handle 25 mm Dia & Locking arrangements Provided. Bottom: SS Perforate sheet welded and it is double jacketed provided.Attachment: Cleaning Nipple, Steam inlet, drain pipe, wheel valve Provided.Side arms: Dia-65mm SS Support Rod & Steam inlet connection Flanges (male & female) will be made out of thick SS plates.Lid: 1.2mm Stainless Steel Sheet-304 Grade.Mounted on: 2" SS Tubular stand Provided.
2
-
-
Idly Cooking Plant - 120 Idly Fully SS 304 Grade
No.Of Trays: 6-No's Trays. (Each Tray 20-No's Idly)Outer bBody: 1.5mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.
Door: SS Handle with Rubberized Door Provided.Racks: LHS & RHS Support with L-Type SS Plate for Tray's Supports Provided. Stand: Stand by SS Angle & SS Pipe frame Provided. Bush: Adjustable Nylon Bush Provided.
2
-
-
Steam Pipe Line Work Gate valve Union, L-bend, Tata C-class MS Pipe ¾"Glasswool Rob, Clamps, Screw,Labour Charges Including.
Steam Line Approx. Running +/- 25.0 Meter Extra Per Running Meter: Rs.1,600/-
2
-
-
Single Burner Bulk Cooking Range Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Inner Frame: MS Angle & MS Pipe Provided.Ring: Square Ring Provided.Burner: G-10 Burner fitting with L.P.Gas Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided.Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 30" x 30" x 18" (LxBxH)
4
-
-
Single Burner Range Fully SS 202 GradeTop: 1.2 mm Thickness Salem Stainless Steel Sheet -Matt Finished Provided.Inner Frame: MS Angle & MS Pipe Provided.Ring: Square Ring Provided.Burner: G-9 Burner fitting with L.P.Gas, Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush. Size: 24" x 24" x 18" (LxBxH)
4
-
-
Double Burner Range Fully SS 202 GradeTop: 1.2 mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. Inner Frame: MS Angle & MS Pipe Provided.Ring: 2-No's - Square Ring Provided.Burner: G-9 & T-35 Burner fittings with L.P.Gas Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided.Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 24" x 18" (LxBxH)
2
-
-
Single Unit Sink Fully SS 304 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. Splash: Back side 6" Height Splash by SS Shhet Provided.Outlet: Center Outlet with Waste Coupling Provided.Leg: 1½" Square SS Pipe Provided. Bush: Adjustable Nylon Bush Provided.Sink Size: 1-No. - 18" x 18"x 9" Sink Provided.Size: 24" x 24" x 33" + 6" (LxBxH+Splash)
2
-
-
Tandoori Pot Fully SS 202 GradeModel: Charcoal Model with Skewer & Lid Size: 30" x 30" (LxB)
2
-
-
Work Table (T/B) Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 24" x 33" (LxBxH)
2
-
-
Kneading Table (T/B) Fully SS 202 GradeTop: Granite Provided.Top Frame: 1½" x ¾" Rectangle SS Pipe Provided.Splash: Three sides 6" Height Splash by SS Sheet Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.
Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 60" x 30" x 33" + 6" (LxBxH+Splash)
2
-
-
Dosa Cooking Range Fully SS 202 Grade (Glass Wool Packing) Top: 1½" Square SS Pipe Frame Provided.Splash: Three sides 6" Height Splash by SS Sheet with Water Outlet (Removal Type) Provided.Cover: Outer Two sides Half covered by SS Sheet Provided.Cover: Inner Two sides Half covered by GI Sheet Provided.Heat Proof: Glass Wool Packing Provided.Burner: 2-No's - "V" Type Dosa Burner fittings with L.P.Gas Accessories In-Built of Range Provided.Dosa Plate: 20mm Thickness MS Plate Provided.Legs: 1½" Square SS Pipe Provided. Support Leg: 1¼" Dia Round SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Size: 72" x 30" x 33" + 6" (LxBxH+Splash)
2
-
-
2-Vessel Batter Stand Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Vessel: 2-No's - 10-L Round SS Vessel with Lid Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.
Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Size: 24" x 15" x 30" (LxBxH)
2
-
-
Three Burner Chinese Range Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Inner Frame: MS Angle & MS Pipe Provided. Splsah: Back side Only 6" Height Splash by SS Sheet Provided. Ring: 2-No's Square Ring & 1-No Dum Ring Provided.Burner: T-35 & G-9 Burners & 2-No's Pilot fittings with L.P.Gas Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided. Tray: Waste Collection Tray Provided. Bottom: Stiffener Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Size: 72" x 27" + 3" x 33" + 14" (LxBxH+Splash)
2
-
-
Work Table (T/B) Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 60" x 24" x 33" (LxBxH)
2
-
-
2-Door Work Top Under Counter Chiller with 2-
OHS Brand: Hoshizaki Model: RTW-150MS4 Capacity: 415-L OHS: 12" Width Two OHS by SS Sheet Provided.Size (in): 60" x 30" x 34" +18" +12" (LxBxH+2-OHS)Size (mm): 1500 x 750 x 850 +450 +300 (LxBxH+2-OHS)
2
-
-
Work Table (T/B) with 2-OHS Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided. OHS: 12" Width Two OHS by SS Sheet Provided. OHS Front & OHS Sides: Full Opening Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 24" x 33" + 18" + 12" (LxBxH+2-OHS)
2
-
-
4-Tier Multi Purpose Storage Rack Fully SS 202 GradeSheet: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: 4 Nos Shelves by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 19" x 60" (LxBxH)
6
-
-
4-Door Vertical FreezerBrand: Hoshizaki Model: HFW-147MS4 Capacity: 1365-LSize (in): 55" x 32" x 81" (LxBxH)Size (mm): 1400 x 818 x 2050 (LxBxH)
2
-
-
Work Table (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 24" x 33" (LxBxH)
4
-
-
Vegetable Cutting Machine with 1No Blade
2
-
-
Mixi Table (T/B) Fully SS 202 GradeTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Bottom: One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Size: 24" x 24"x 33" (LxBxH)
2
-
-
Commercial Mixi Brand: Preethi Xpro
2
-
-
Potato Peeler Capacity: 15-Kgs
2
-
-
Atta Kneader Capacity: 15-Kgs
2
-
-
Tilting Grinder Capacity: 20-L
4
-
-
Work Table (T/B) Fully SS 202 GradeTop:1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 24" x 33" (LxBxH)
2
-
-
4-Tier Multi Purpose Storage Rack Fully SS 202 Grade Sheet: 1.2mm Thickness Salem Stainless Steel Sheet Matt Finished Provided.Shelf: 4 Nos Shelves by SS Sheet Provided.Leg: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 48" x 19" x 60" (LxBxH)
2
-
-
Juice Counter (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. Border: Four sides 2" Border & 90º Depth by SS Sheet Provided. Outlet: Right side Water Outlet Provided.OHS: 12" Width Two Over Head Shelves by SS Sheet Provided. OHS Front: Full covered by 8mm Straight Glass Provided. OHS Sides: LHS & RHS covered by SS Sheet Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.
Cover: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 60" x 30" x 33" + 24" (LxBxH+2-OHS)
2
-
-
Parcel Counter (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. OHS: 12" Width Two Over Head Shelves by SS Sheet Provided.OHS Front & OHS Sides: Full Opening Provided. Shelf: Bottom One Under Shelf by SS Sheet Provided.Cover: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 60" x 30" x 33" + 24" (LxBxH+2-OHS)
2
-
-
Bain Marie Counter Fully SS 202 Grade Model: Heater + GN Pan ModelTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.OHS: 12" Width Two OHS by SS Sheet Provided. OHS Front & OHS Sides: Full Opening Provided.Top: 8-Nos - 1/2 GN Pan (150mm) with Lid Provided.Model: Heater (Auto Cut-Off) Model.Shelf: Bottom One Under Shelf by SS Sheet Provided.Cover: Three sides Full covered by SS Sheet Provided.Bush:Adjustable Nylon Bush Provided.Size: 60" x 30" x 33" + 24" (LxBxH+OHS)
4
-
-
4-Seater Dining Table with Granite Fully SS 202 Grade Model: Y-TypeTop Frame: 1¼" Square SS Pipe Provided.Main Leg: 2½" Dia Round SS Pipe Provided. Floor Leg: 1½" Square SS Pipe Provided.Support Leg: 1¼" Dia Round SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Granite Size: 48" x 36" (LxB) Frame Size: 40" x 26" x 29" (LxBxH)
20
-
-
Cushion Wood Chair
80
-
-
Hand Wash Sink Fully SS 304 Grade Model: "U" Type + Leg Model Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Splash: Back side 6" Height Splash by SS Sheet Provided.Tap Holes: 3-No's Tap Holes Provided.Provision: Left side Water Outlet Provided. Legs: 1½" Square SS Pipe Provided.
Bush: Adjustable Nylon Bush Provided. Size: 60" x 18" x 33" + 6" (LxBxH+Splash)
2
-
-
6-Seater Dining Table with Granite Fully SS 202 Grade Model: Y-Type Top Frame: 1¼" Square SS Pipe Provided. Main Leg: 2½" Dia Round SS Pipe Provided. Floor Leg: 1½" Square SS Pipe Provided.Support Leg: 1¼" Dia Round SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Granite Size: 72" x 36" (LxB)Frame Size: 66" x 26" x 29" (LxBxH)
20
-
-
4-Seater Dining Table with Granite Fully SS 202 Grade Model: Y-TypeTop Frame: 1¼" Square SS Pipe Provided.Main Leg: 2½" Dia Round SS Pipe Provided. Floor Leg: 1½" Square SS Pipe Provided.Support Leg: 1¼" Dia Round SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Granite Size: 48" x 36" (LxB)Frame Size: 40" x 26" x 29" (LxBxH)
18
-
-
SS Straight Wood Chair
192
-
-
Cash Counter (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. Splash: Three sides 6" Height Spalsh by SS Sheet Provided.OHS: Front side 6" Width One Over Head Shelf by SS Sheet Provided.Cash Draw: 2 Nos Cash Draw with Coin Bowl Provided. Shelf: Bottom One Under Shelf by SS Sheet Provided.Cover: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 48" x 24" x 36" + 6" (LxBxH+Splash)
2
-
-
SS Cash Counter Chair
4
-
-
Delivery Counter (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided. Splash: Three sides 6" Height Spalsh by SS Sheet Provided.OHS: Front side 6" Width One Over Head Shelf by SS Sheet Provided.Shelf: Bottom One Under Shelf by SS Sheet Provided.Cover: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 48" x 24" x 33" + 6" (LxBxH+Splash)
2
-
-
SS Straight Wood Chair
4
-
-
Hand Wash Sink Fully SS 304 Grade Model: "U" Type + Leg ModelTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Splash: Back side 6" Height Splash by SS Sheet Provided.Tap Holes: 4-No's Tap Holes Provided.Provision: Left side Water Outlet Provided. Legs: 1½" Square SS Pipe Provided.
Bush: Adjustable Nylon Bush Provided. Size: 72" x 18" x 33" + 6" (LxBxH+Splash)
4
-
-
4-Seater Dining Table with Granite Fully SS 202 Grade Model: Y-TypeTop Frame: 1¼" Square SS Pipe Provided.Main Leg: 2½" Dia Round SS Pipe Provided. Floor Leg: 1½" Square SS Pipe Provided.Support Leg: 1¼" Dia Round SS Pipe Provided.Bush: Adjustable Nylon Bush Provided.Granite Size: 48" x 36" (LxB)Frame Size: 40" x 26" x 29" (LxBxH)
12
-
-
SS Straight Wood Chair
48
-
-
Hand Wash Sink Fully SS 304 Grade Model: "U" Type + Leg ModelTop: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Splash: Back side 6" Height Splash by SS Sheet Provided.Tap Holes: 4-No's Tap Holes Provided.Provision: Left side Water Outlet Provided. Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 72" x 18" x 33" + 6" (LxBxH+Splash)
4
-
-
2-Door Visi Cooler Brand: Western Model: SRC950GL Capacity: 807-LSize (in): 40.3" x 27.8" x 80.7" (LxBxH) Size (mm): 1050 x 705 x 2050 (LxBxH)
2
-
-
Flat Glass-Top Ice Cream Freezer Brand: Western Model: WHF450G Capacity: 440-LSize (in): 53.5" x 25.8" x 31.1" (LxBxH) Size (mm): 1360 x 655 x 790 (LxBxH)
2
-
-
Puff's Warmer Counter Model: (G+3) + Fan Throw Model + Toughend Straight Glass Size: 36" x 24" x 48" (LxBxH)
2
-
-
Bakery Counter - Normal Model: (G + 3) + Straight Glass Bottom: MS Pipe Frame with Covered by SS Sheet Provided. Shelf: Ground + 3-No's Shelves made by 6 mm Normal Glass with LED Strip Light Provided. Outer: Three sides 8mm Normal Glass with Edge Sticker Provided. Top: Half Granite and Half Glass Provided.Door: Aluminum Frame with Sliding Door Provided.Wheel: Heavy Nylon Wheel (Break &Non-Break) Provided.Size: 48" x 24" x 48" (LxBxH)
4
-
-
Fresh Cream Counter - Cooler Model: (G+2) + Cooler Model + Toughend Straight Glass Size: 48" x 24" x 48" (LxBxH)
2
-
-
Tea Stall (T/B) Fully SS 202 Grade Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Splash: Three sides 9" Height Splash by SS Sheet Provided.umbler Tray: Front side ONLY 6" Width Tumbler Tray by SS Sheet Provided.Outlet: Right side Water Outlet Provided.Shelf: Bottom One Full Under Shelf by SS Sheet Provided.Cover: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 60" x 30" x 33" + 9" + 6" (LxBxH+Splash)
2
-
-
Double Burner Tea Range Fully SS 202 Grade
Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Inner Frame: MS Angle & MS Pipe Provided.Ring: 2 No's - Square Ring Provided.Burner: 2 No's - G-8 Burner fitting with L.P.Gas Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided.Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 36" x 15" x 27" (LxBxH)
2
-
-
Single Burner Vada Range Fully SS 202 Grade
Top: 1.2mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.Inner Frame: MS Angle & MS Pipe Provided. Ring: Square Ring Provided.Burner: T-35 Burner fitting with L.P.Gas Accessories In-Built of Range Provided.Cover: Four sides Half covered by SS Sheet Provided.Legs: 1½" Square SS Pipe Provided.Bush: Adjustable Nylon Bush Provided. Size: 24" x 24" x 27" (LxBxH)
2
-
-
Vada Stall (T/B) Fully SS 202 GradeTop: 1.2 mm Thickness Salem Stainless Steel Sheet - Matt Finished Provided.OHS: 12" Width Two OHS by SS Sheet Provided.OHS Front: Full covered by 8mm Straight Glass Provided. OHS Sides: LHS & RHS covered by SS Sheet Provided.
Tray: 8 Nos Tray by SS Sheet Provided.Shelf: Bottom One Under Shelf by SS SheetProvided.Covered: Three sides Full covered by SS Sheet Provided.Bush: Adjustable Nylon Bush Provided.Size: 48" x 24" x 33" + 24" (LxBxH+2-OHS)
2
-
-
LP Gas Line Connection 6 Manifold with NRV Black Hose, Clikon Adaptor, Copper Pigtail & HP Regulator, Brass Adaptor, Including Accessories LP Gas Pipe Line InstalationMS Tata 'C' Class1/2 "Pipe, Elbow & Ms Fittings all Materials Tufland MLV, NCV Hose & Pipe Clamp Including Labour Charges. (Approximatly Running 70' Feet) Extra per Running Feet: Rs. 260/-
2
-
-
Pipe Gratings Fully SS 304 Grade Gratings are made By SS Pipe Fabrication Outer Frame are made by SS 20mm Square Pipe Inner Crossing Line are 12mm Square Pipe Overall Size: 70' Feet x 9" (LxB) **Extra per Running Feet: Rs. 950/-
140
-
-
Exhaust System with Filter
SS Suction Hood - 32' Feet (Single Burner Bulk Range - 2Nos + Tandoori - 1Nos)
*Size: 36" x 36" x 17" - 3 Nos (One Burner Range - 2Nos + Two Burner Range - 1 No)
*Size: 60" x 36" x 17" - 2 Nos (Three Burner Chinese - 1 Nos)
*Size: 72" x 36" x 17" - 1 Nos (Dosa Range - 1 Nos)
*Size: 84" x 36" x 17" - 1 Nos Motor:-
5 HP Motor with Blower 3 PH - 1 No.
*LLS Centrifugal Blower with dynamic Balanced Impeller 3 HP Motor with Blower 3 PH - 1 No.
*LLS Centrifugal Blower with dynamic Balanced Duct :-
*Ducting Made by GI Sheet, Angle Frame Support Stay Rates Bold Nuts *Total Approximate Feet: 70' Feet.
Extra Per Running Feet: Rs. 1,600/- Hood Erection &Fitting Charges Including. Note:-
* Electrical Wiring, Starter, MS Motor Stand, Scaffolding & Civil at Customer Side...
2
-
-
Motor:-3 HP Motor with Blower 3 PH - 1 No.*LLS Centrifugal Blower with dynamicBalanced. Grill:* Fresh Air Grill - 8Duct:* Ducting Made by GI Sheet Angle Frame Support Stay Rates Bold Nuts Running Feet: 80' Ft* Extra Per Feet Rs : 1,600/- Erection &Fitting Charges Including
2
-
-
Alu. Flat Vattai with Lid
2 to 15 Padi Set
220
-
-
SS Bucket no.8
20
-
-
SS Bucket no.9
20
-
-
SS Bucket no.10
20
-
-
SS Karandi no.3
20
-
-
SS Karandi no.4
20
-
-
SS Karandi no.5
20
-
-
Commercial Jara 3.5 Ft (5 Pcs)
30
-
-
SS Thuduppi No.9
6
-
-
SS Thuduppi No.3
6
-
-
Veg Stainer No.9 (3 Pcs)
21
-
-
Veg Stainer No.8 (3 Pcs)
18
-
-
Rice Stainer No.20 (2 Pcs)
20
-
-
Rice Stainer No.22 (2 Pcs)
24
-
-
Rice Stainer No.24 (2 Pcs)
32
-
-
SS Kadai 24" Dia (2 Pcs)
88
-
-
SS Kadai 20" Dia (2 Pcs)
68
-
-
SS Jara no.9
4
-
-
SS Jara no.12
4
-
-
Hawkins Cooker 22-L
4
-
-
Kaviraj Cooker 30-L
4
-
-
Masala Box 9 in 1
4
-
-
Masala Box 12 in 1
4
-
-
Masala Box 6 in 1
4
-
-
SS Lemon Squeezer
10
-
-
Juice Stainer no.6
6
-
-
Milk Stainer no.7
6
-
-
SS Basin no.17
12
-
-
SS Basin no.19
20
-
-
Deep Mixing bowl no.9
12
-
-
SS Anna Karandi
12
-
-
Ovan Anna Karandi
12
-
-
Tavita no.1
6
-
-
SS Peeler
10
-
-
Knife Sharping Stone
10
-
-
SS Greater
6
-
-
Box Type Greater
4
-
-
Pipe Scoop No.5
6
-
-
Pipe Scoop No.6
6
-
-
Wood Poori Roller
12
-
-
Wood Knife
20
-
-
Chef Knife R11231RO
4
-
-
Chef Knife R11421RO
4
-
-
Chef Knife R1123RO
4
-
-
PC Handle Chopper
2
-
-
SS Mug 1-L
4
-
-
SS Mug 2-L
4
-
-
Alu Sauce pan no.14
4
-
-
Alu Sauce pan no.15
4
-
-
Alu Sauce pan no.16
4
-
-
Chinese Kadai no.14
4
-
-
Chinese Kadai no.15
4
-
-
Chinese Kadai no.12
4
-
-
Chinese Karandi no.4
4
-
-
Chinese Karandi no.5
4
-
-
Chinese Karandi no.6
4
-
-
SS Anna Koodai 15"
4
-
-
SS Adukku 5 Piece Set
20
-
-
Expresso Casserole 15-L
4
-
-
Expresso Casserole 25-L
4
-
-
Cutting Board 1" (Green)
4
-
-
Cutting Board 1" (White)
4
-
-
Cutting Board 1" (Yellow)
2
-
-
Gas Lighter 18"
10
-
-
Gas Lighter 12"
10
-
-
Scissors Big
10
-
-
Scissors Small
10
-
-
Use & Throw Cap
10
-
-
Apron
40
-
-
Cotton Cloth
60
-
-
SS Tray
Size: 36"x24" x2" (LxBxH)
10
-
-
Conical Stainer 10"
4
-
-
MS Kadai 18" (2 Pcs)
36
-
-
MS Kadai 20" (2 Pcs)
44
-
-
MS Jara no.8
4
-
-
MS Jara no.9
4
-
-
Tea Can 10-L
4
-
-
Tea Can 15-L
4
-
-
Tea Can 5-L
2
-
-
Peeding Topes
40
-
-
Tin Opener
4
-
-
Bottle Opener
4
-
-
Pulka Stand
4
-
-
Chomaka 3 in 1
20
-
-
Chomaka 2 in 1
20
-
-
Kuli Karandi Size: 0
60
-
-
FG Tray (Plastic - Rectangle)
20
-
-
Citrus Juicer (Small)
2
-
-
Sujatha Frootmix
4
-
-
Sujatha Frootmix (Extra Jar)
4
-
-
Preethi Mixi
4
-
-
Plastic Drum 60-L
4
-
-
Plastic Drum 80-L
4
-
-
Plastic Container 5-Kg
4
-
-
Plastic Container 10-Kg
4
-
-
Alu Storage Box 75-L
10
-
-
Alu Storage Box 50-L
20
-
-
Alu Storage Box 30-L
20
-
-
SS Drum (5 Pcs)
54
-
-
Tiffen Carrier 14*5
4
-
-
Tiffen Carrier 13*5
4
-
-
Tiffen Carrier 10*5
4
-
-
Plastic Drum
56
-
-
Plastic Drum
24
-
-
Table Mat
80
-
-
SS Water Jug (Big)
80
-
-
SS Water Tumbler
400
-
-
Square 7*7
50
-
-
Square 10*8
20
-
-
SS Thaliplate
300
-
-
SS Pickle set 3 in 1
70
-
-
SS Kattori
2400
-
-
Sauce Bottle
140
-
-
Coffee Spoon
200
-
-
Desert Spoon
200
-
-
SS Ice Cream Bowl
200
-
-
Ice Cream Spoon
200
-
-
SS Soup Bowl
150
-
-
SS Saucer
150
-
-
Soup Spoon
150
-
-
Pepper & Salt
80
-
-
Tissue Stand
70
-
-
SS Serving Handi no.3
240
-
-
Starter Plate
72
-
-
Naan Basket (SS)
100
-
-
Copper Sambar Bucket (Small)
70
-
-
Oil Pot SS (Small)
70
-
-
SS Oval Dish no.2
150
-
-
Desert Fork
200
-
-
Desert Knife
70
-
-
Bill Folder
40
-
-
Menu Folder
20
-
-
Sauce Spooon (Tea Spoon)
120
-
-
Service Spoon
150
-
-
Tea Spoon
200
-
-
Serving pot 2 in 1 (Chattni)
70
-
-
China Plate no.11
200
-
-
Coffee Tumbler
300
-
-
KOT Stand 2'ft
4
-
-
Hand Dryer
6
-
-
Insect Killer
10
-
-
Soup Oil Dispenser
12
-
-
Dust bin Aristo 110-L
6
-
-
SS Tissue Holder
4
-
-
Rubber Mat 5*3
10
-
-
SS Anda Set 5Pcs Set (2 Set)
50
-
-
Electric Milk Boiler 12ltr (Ahrudh)
2
-
-
Tea & Coffee filter
2
-
-
SS Copper Kadai no.4
70
-
-
Copper Coating Kadai no.4
70
-
-
Pilsonery 300ml
200
-
-
Cocktile
100
-
-
Soda Cup
100
-
-
GN Pan 1/2 (150mm) with Lid
30
-
-
GN Pan 1/6 (150mm) with Lid
30
-
-
GN Pan 1/4 (150mm) with Lid
20
-
-
GN Pan 1/1 (150mm) with Lid
12
-
-
GN Pan 1/3 (150mm) with Lid
12
-
-
Royal Tub No.1 (Medium)
12
-
-
Royal Tub No.2 (Big)
12
-
-
Tea Glass With handle
100
-
-
Manual Pot Spring Roll
4
-
-
Deep Fryer 6ltr
4
-
-
Diana Mittai Tray (No.5)
10
-
-
Diana Mittai Tray (No.6)
10
-
-
Mixer Box (NM1)
10
-
-
SS Topes Set 12Pcs Set (1 Set)
24
-
-
Weighing Scale (200 Kgs Capacity)
4
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End
304
-
-
Supply and fixing of WT bulk head fitting with guard suitable for 9W CFL LED Bulb with electrical connection.
188
-
-
Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall
16
-
-
Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan
20
-
-
Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting.
426
-
-
supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .
94
-
-
supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting
4
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open PVC conduit Plug point ( 8 points / Coil) Lower End
4
-
-
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour
1345
-
-
Supply and fixing of 2000W automatic electric water heater of 40 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection
4
-
-
Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
1770
-
-
Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
435
-
-
Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection
114
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
71
-
-
Supply and Run of 1 of No.8 SWG copper wire for earth connection
150
-
-
Supply and fixing of 1 no.6/16 A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End
7
-
-
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour
3060
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
1093
-
-
Supply and fixing of 9 W LED bulb for BH point
139
-
-
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.
235
-
-
Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End
154
-
-
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V)32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm withsupporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit
13
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End
14
-
-
Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Lower end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
162
-
-
Supply and fixing of 2 Modular 16 A Socket in suitable 2 Modular box in flush with wall
94
-
-
Supply and fixing of 2 Modular 16 A Switch in suitable 2 Modular box in flush with wall
94
-
-
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)
46
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall
115
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan
115
-
-
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Lower End
24
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Concealed PVC conduit Plug point ( 8 points / Coil) Lower End
18
-
-
Supply and fixing of automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection
14
-
-
Supply, erection,testing and commissioning of 2 Ton (6000 K.Cal/Hr) ABS Plastic split type Air conditioner confirming to is : 1391(part 2) 1992 Amdt No.1 to 2 fitted with Rotory compressor operating Refrigerant R.22/ Non CFC suitable for wall mounting for operating on 230 voltrs, 50 HZ single phase AC supply with star rating of 3 as per BEE specification and capable of performing the functions of 1) Cooling 2) De humidifying 3) Air circulating 4) filtering.
The installation works for the above split type AC units includes the followings. Mounting/fitting in door and out door units at the respective locations.
1. Laying Refrigerant pipe line of required length connecting both units after drilling hole/holes in the wall if required. Thickness of copper tubing shall not be less than 0.7mm. 2. Insulating the suction pipe with expanded polyethylene foam 5 mm tubing. 3. Laying 15mm dia Flexible PVC drain pipe to throw out. The condensate water being formed within Indoor unit. 4. Leakage testing the entire system with outdoor unit stand. 5. Charging Refrigerant gas in the unit. 6. Suitable electric wiring to be provided with 2.5 sqmm. PVC insulated copper wire between indoor and out door units up to 6 meters length and up to Switch within 3 meters of location of in door Unit. (Carrier/voltas)
14
-
-
Supply and installation of 5 KVA Capacity Automatic Voltage Stabilizer with time delay relay (M-1989)
14
-
-
supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 30W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .
35
-
-
supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing 2 no's of 48W LED street light fitting with LED (Higher end) with , 2 no's 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour
7
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
33
-
-
Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
28
-
-
Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire andmaking good of the concealed portion with suitable colour
490
-
-
Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable HDPE Pipe
50
-
-
Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metreputting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
60
-
-
Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
10
-
-
Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable HDPE PIPE
5
-
-
Supply and laying of 3 1/2 x120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
120
-
-
Supply and clarnping of 3 1/2 x120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
35
-
-
SSupply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
5
-
-
Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection
6
-
-
Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
6
-
-
Supply, Erection, testing and commissioning of 200A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers with 1. 200A FP switch disconnector fuse unit interior only with HRC fuses double break-1 Nos. 2. 32A TPN switch disconnector fuse unit interior only with HRC fuses double break-2 Nos.
3. 63A TPN switch disconnector fuse unit interior only with HRC fuses double break-8 Nos.
The busbar chamber shall consist of 4 Nos 38mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses.
-
-
-
The 33mm x 6mm copper flat for interconnection between 63A TPN switches and 32A TPN switch to buses. 38mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (note: All SDF unit shall be of L&T / Siemens make)
1
-
-
Supply and fixing of Douple pole sheet steel enclosure with 1 no 30 A DP isolator on wall and necessary connection for street light control
6
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
540
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
-
-
-
5. No. of floors: Ground + 3 floors
-
-
-
6. Leveling Accuracy: High level
-
-
-
7. Construction of Car: 18 SWG High quality stainless steel car, powder coated stretcher impact protection
-
-
-
8. Position of machine: Directly above the lift well
-
-
-
9. No. of landing entrance: 7Nos
-
-
-
10. No. of car entrance: one in front only
-
-
-
11. Car entrance door: power operated
-
-
-
12. Car entrance door: Power operated center opening sliding 18 SWG stainless steel vandal proof door with provision for emergency key opening at all landings
-
-
-
13. Lift well : existing (as per IS) 1900mm wide x 1900mm Deep
-
-
-
14. Car clear opening : as required (as per IS 14665) (part I) - 2000) 2000mm Height x 1100mm Wide
-
-
-
15. Power supply: 400/415 V, 3 phase, 50 Cy/sec., A.C. supply for power and 230 V, 50 HZ, single phase, AC supply for light.
-
-
-
16. Control: Micro computer (Micro processor) based simplex selective collective control with/without attendant.
-
-
-
17. Car fitting: Glare free LED lighting with 300mm sweep cabin fan with elegant ok and with comfortable ventilation inside the car.
-
-
-
18. Lift well: R.C.C. construction with brick masonry
-
-
-
19. Indication: UP/Down digital direction and position indicator for all landing and in car
-
-
-
20. Emergency alarm bell: Battery operated alarm bell to be provided with Automatic charging device
-
-
-
21. Emergency light: Battery operated light to be provided with Automatic charging device
-
-
-
22. Fire Man’s switch: To be provided at ground floor
-
-
-
23. Minor builders work: included in the scope.
-
-
-
24. Scaffolding: Included in the scope
-
-
-
25. Sill angles and facia plates: included in the scope.
-
-
-
26. Steel for lift machinery: Included in the scope
-
-
-
27. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year.
-
-
-
28. Automatic Rescue device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories.
-
-
-
29. Provision of intercom with phone: To be provided by lift contractor with one handset in the lift car and another handset in the lift machine room with telecom exchange unite with one trunk and three extension linked proton 103 matrix telecom unit and required length of single twisted pair with thickness of 0.5 mm to 1 mm connecting the handsets and telecom exchange unit.
-
-
-
30. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor.
-
-
-
31. Floor announciator with music.
-
-
-
32. Special features:
-
-
-
a. Infra red door sensor 2D with full height screen.
b. Full width half height rear panel mirror.
c. Tubular stainless steel hand rail in cars.
d. Voltage stabilizer for circuit control.
e. Stainless. Steel signal fixtures.
f. Vandal proof S.S. Button with S.S. cover
g. SS door frames for landing doors.
h. VF door operator.
i. Call Register signal
j. Stainless steel facia plate for car operating panel and landing fixtures.
k. On – Off switch for fan and light
l. Over load warning indicator with audio announcement
-
-
-
33. Other standard features: Over speed governor, phase failure and phase reversal relay, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limit switch main suspension ropes counter weights lifting joist for mounting the machineries
-
-
-
34. Guarantee: Gurantee for the materials and workmanship of equipments complete should be offered by lift firm for a period of not less than one year.
-
-
-
35. Site testing in accordance with IS 14665 should be carried out at the time of handing over.
-
-
-
36. Supply of operation and maintenance manual with necessary tools for operation
2
-
-
Supply and Fixing of 200A 3 Phase LTCT size( 3' x 2.5' x 1’) 3 Compartment Panel comprising 200A, 500V Fuse Unit and Neutral Link and 200/5A CT for Meter Reading in a Separate Compartment with bus bar Arrangment with1" x 1/4" copper bus bar R,Y,B,N connection and Earth bus copper 25mm x 3mm for Earth connection on Suitable Angle iron Frame Work Erection charges with suitable foundation bolts and nuts washer and grounding with cement concrete, testing and commissioning with complete wiring from CT meter to energy meter.
1
-
-
Supply and fixing Anchor Roma make 32 A Key ring tag switch (Poly carbonate 32A switch) in flush with wall
40
-
-
Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on
suitable TW board with push switch
40
-
-
Supply and fixing of Anchor Roma Louvres White Foot Lamp with 4 Module Box & Tresa Cover, 22025 in Grabtree 4Module Box with necessary connection.
40
-
-
Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only
2
-
-
Supply, Installation, testing commissioning & Handling over of 1No 125KVA diesel generator set 0.8P.F, 3 ph, 415 Volts, 50c/s, 1500 RPM (Kirloskar Green / Cummins ) as detailed below. Standerd Panel
-
-
-
A. Engine: Water cooled diesel engine suitable for generating application (Kirloskar Green/ Cummins ) developing shaft output of 156 BHP at 1500 RPM under NTP condition as per BSS 5414-ISO 8528 . The engine shall comprise the following standard scope of supply.
-
-
-
1) Dry type Air cleaner 2) Expansion bellow
3) Radiator, radiator fan and mounting
4) Air to air charge cooler
5) Exhaust gas turbo charger 6) Lube oil cooler and lube oil filter 7) Fuel filter (pre and micro)
-
-
-
8) In-line mono-block fuel injection pump with governor and fuel feed pump
9) Electronic governor 10) 24V battery charging alternator
11) 24V Volt electric starter motor 12) Engine test certificate
13) Residential Muffler
14) Fly wheel with starter ring.
-
-
-
Engine instrument panel: Engine control panel consisting of ON/OFF/START/KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator.
-
-
-
Safety system of Engine:
-
-
-
The engines shall trip for the following conditions with Visual alarm device.
1) Low lubricating oil pressure
2) High water temperature
3) Vee - belt failure and over speed
4) Low battery indication The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.
-
-
-
B. ALTERNATOR : Alternator capacity of 125KVA (100KW), AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self excited, self regulated, Brushless design to run at 1500 RPM under NTP conditions conforming to BS 5000/IS 13364 (part-II) 1992 (KIRLOSKAR GREEN / STAMFORD) to be coupled directly to the Diesel engine and test certificate
-
-
-
C) STANDARD CONTROL PANEL : The standard control panel (cubical) should be vermin proof and dust proof best quality sheet steel of 16 SWG CRCA MS sheet and floor mounted with suitable hinged glass doors and enamel painted. The panel should be completed with suitable Square/ Rectanguler copper bus bars with internal connections and with necessary cables and other accessories and with tapings for the incoming supply from the alternator and for the outgoing supply to the load and incorporating Suitable MCCB and HRC fuses, Set of control fuses, etc. with following facilities.
-
-
-
1. UNDER / OVER LIMIT
i. High coolant Temperature
ii. Low lube oil pressure
iii. Over speed
iv. Start fail
v. Emergency stop
vi. Over load
2. FAULT INDICATIONS:
i. LLOP - Low Lub. oil pressure
ii. HWT - High water temperature
iii. OL - Over load
iv. E.STOP - Emergency stop
v. DG - Gen set ON
vi. LOAD - ON
-
-
-
3.Metering & Protective relaying:
i) Multi function Digital panel meter with the functions of Ammeter , Voltmeter, Frequency Meter, Power factor meter, KW meter, KWHr Meter .- 1No 2) Current transformers of suitable ratio. – Set of 3Nos.
3) Earth fault relay – 1No
-
-
-
4. Battery charger: An automatic battery charger of 20A rated with suitable Transformer, Bridge rectifier and voltage regulator with selectable boost/float/trickle charging facility and automatic cut off function should be provided for charging the battery from mains in addition to the battery charging alternator fitted to the engine. The charger should have status indicator with LCD display and DC circuit breaker.
-
-
-
D) ACOUSTIC ENCLOSURE: Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet. The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm power coating done after seven-tank surface preparation process of sheet metal. Canopy panel and door shall have inside lining of FIRE-RETARDANT foam / Wool(conforming to BS4735/BIS7888). Four hinged doors shall be provided to canopy. The average sound level at 1Mt. distance shall be less than 75DBA average or as per CPCB norms.
-
-
-
SURFACE TREATMENT – PAINTING : The enclosure shall be suitably treated for degreasing, de-rusting and phospating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES : Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any.
-
-
-
WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg c/ambient temperature. No grounding required on the ground, only a level surface capable of withstanding the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading. Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.
-
-
-
E) Base Frame : Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges.
-
-
-
F) Fuel Tank : 230Lts. Removable fuel tank shall be fabricated out of 14SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. First filling of engine oil and 320 litres of diesel for testing the DG set on full load for 8 hours.
-
-
-
G) Battery : 12V 180 AH- 2 Nos battery mounting the batteries on 1/2" thick hylum sheet base with suitable AI frame work support on floor by the side of generator set.
-
-
-
H) Exhaust Piping : DG set should be offered complete with exhaust piping i.e. silencer is mounted and connected by means of MS pipe through flexible pipe to the engine manifold. Entire exhaust piping inside the canopy (cold Zone) is insulated by means of ceramic wool and aluminum gladded.
-
-
-
I) Supply of maintenance and operating manual: 1. Operation & Maintenance manual for Engine with parts list
2. Maintenance Manual for Alternator with parts list
3. Engine test certificate 4. Alternator test certificate
5. Circuit diagram for control panel
6. DG set test certificate
7. CPCB compliance label fixed on canopy
-
-
-
A. Engine: Water cooled diesel engine suitable for generating application (Kirloskar Green/ Cummins ) developing shaft output of 156 BHP at 1500 RPM under NTP condition as per BSS 5414-ISO 8528 . The engine shall comprise the following standard scope of supply.
2
-
-
Supply and installation of Additional length of exhaust piping with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation.
12
-
-
Providing suitable concrete foundation with cement concrete 1:2:4 of height 5 feet with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation.
1
-
-
Preparation of Site plan, physical layout electrical schematic diagram (6 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees and obtaining safety certificate from CEIG.
1
-
-
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
50
-
-
Supply and laying of 3-1/2 x 150 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
30
-
-
Supply and clarnping of 3-1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
15
-
-
Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection
2
-
-
Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete
2
-
-
Towards Charges for Transporting and unloading the DG Set at the site (LR)
1
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
1
-
-
Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.
60
-
-
Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete
2
-
-
Supply and laying of 3-1/2 x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metreputting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
80
-
-
Supply and clarnping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
20
-
-
Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection
4
-
-
Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable withnecessary aluminium cable sockets by crimping etc with electrical connection complete
4
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
1
-
-
Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P DP MCB Isolator as incoming and 2 nos 63A TP MCB and 6 No's . 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
1
-
-
Supply and laying of 3-1/2 x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
40
-
-
Supply and clarnping of 3-1/2 x 35. PVC LTUG armoured cable on post or on wall with MS clamps
310
-
-
Supply and frxing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection
14
-
-
Supply and fixing of 375mm (15") sweep (heavy duty) AC exhaust fan complete without provision of holes in the wall
4
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 4 nos. 63A TP MCB as outgoing on wall with earth connection only. Higher End
1
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 6 nos. 32A 3P MCB as outgoing on wall with earth connection only. Higher End
2
-
-
Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
1
-
-
Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only
1
-
-
Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
22
-
-
Supply, Erection, testing and commissioning of 200A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers with 1. 200A FP switch disconnector fuse unit interior only with HRC fuses double break with interlocking Key Arrangement-2 Nos. 2. 32A TPN switch disconnector fuse unit interior only with HRC fuses double break-2 Nos.
3. 63A TPN switch disconnector fuse unit interior only with HRC fuses double break-8 Nos.
The busbar chamber shall consist of 4 Nos 38mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses. The 33mm x 6mm copper flat for interconnection
-
-
-
between 63A TPN switches and 32A TPN switch to buses. 38mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (note: All SDF unit shall be of L&T / Siemens make). (Data X)
1
-
-
Supply and Fixing of 200A 3 Phase LTCT size( 3' x 2.5' x 1’) 3 Compartment Panel comprising 200A, 500V Fuse Unit and Neutral Link and 200/5A CT for Meter Reading in a Separate Compartment with bus bar Arrangment with1" x 1/4" copper bus bar R,Y,B,N connection and Earth bus copper 25mm x 3mm for Earth connection on Suitable Angle iron Frame Work Erection charges with suitable foundation bolts and nuts washer and grounding with cement concrete, testing and commissioning with complete wiring from CT meter to energy meter.
1
-
-
Supply and erection of 60 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 12 stage, (at 0.95 lag), made up of powder coated, 16 SWG CRCA sheet steel enclosure with 1 1/2" x 1 1 1/2" x 1/2" AI Frame work with RCC concreting foundation and bolted to masonry pedestal with 630A TPN MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters.
a. Vr — R phase Line Voltage
b. Vy — Y phase Line Voltage
c. Vb — B phase Line Voltage
-
-
-
d. Ir — R phase Line current
e. Iy — Y phase line current
f. lb — B phase Line Current
g. KW — Present Kilo Watts
h. RKVA — Present KVAR Demand i.KVA — Present KVA j. PF — Present Power Factor k. Number of Capacitor bank ON/OFF
I. Provision to indicate the imbalanced load
m.Provision to indicate the change in phase Sequence
n. The APFC Panel Should also have built in protection for current imbalance. For high Voltage/Low Voltage cut off, single phase Preventer, provision for inductor coil to cater the in-rush currents, line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel with necessary connection. Make. (Matrix /L&T /or equivalent
1
-
-
Supply and laying of 3-1/2 x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
160
-
-
Supply and clarnping of 3-1/2 x 35. PVC LTUG armoured cable on post or on wall with MS clamps
40
-
-
Supply and frxing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection
8
-
-
Supply Erection Testing and commissioning of 415 V/50 Hz Cubicle panel board with centre switches chamber the bus bar chamber and cable chamber on extreme end with 16SWG thick CRCA sheet with 1"x1/8" tinned copper flats for 3 phases and neutral and with 6mm hylem sheet separation of 3 phases and neutral and with synthetic molded insulators bus supports at equal intervals as per IS specification and 2 runs of 1" x 1/8" copper flat on rear side of the panel board fr earth buses with individual 5 chambers for EB meter and separate chamber for 32A DP 100m A RCD with 4.0 sqmm Copper wire with individual 32A Rocker Fuse unit for EB service with necessary connection and fixing on wall with by 1 1/2 x 1 1/2 x 1/4 MS channel and painting with suitable color.
4
-
-
Sub total
-
-
-
GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements