Hindu Religious Institutions And Charitable Endowments Tender

Dismantling clearing away of pressed tiles & weathering course and depositing the debries in the place as shown by the departmental officers.

Weathering course concrete with broken jelly 20mm size and pure unslaked lime over RCC roof slab, the proportion being 32:12.5 (by volume) for required depth for giving required slope and thickness of roof well beatten with wooden beater and constantky wet using lime Jaggery galnut water etc, complete complying with standard specifications.

Finishing the top of roof with one course of machine pressed tiles 23cm x 23cm x 20mm of approved quality laid in lime mortar 1:1.5 12mm thick mixed with water proofing compound 2% by weight of lime used and pointing the same mortar with red oxide etc complete complying with standard specification.

Labour charge of removing, broken old stones (pavukkal, uthiram, pothiyal, wall stones and flooring stones) wherever necessary at temple stacking wherever necessary numbering as directed by the departmental officers.

Pavukkal, Uthiram,Pothiyal and Wall Stone

Flooring stone

Supplying of New Stones like Pavukkal, Uthiram, Pothiyal, Wall Stones of good quality and standard etc., including cost and conveyance of materials etc.complete all as specified and directed by the departmental officers.

Labour charges for cut stone Upapeetam,Kandam, Pattiyal, Jegathi, Kumatham Asvapatham Sthampam, padma jegathi athisdanam excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position including with pointing,.

New stone (kodungai)

old stone

Supplying and filling in foundation in basement with filling sand in layars of 150 mm thickness well watered rammed and consolidated complying with relevant standard specification including cost of supplying filling sand.

Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With Lime Mortor1:1.5 etc complete.

Refixing of available old cut stone for flooring as directed by the departmental officers.

Pointing the cut stone masonry work with lime mortar 1:1.5 excluding cost and conveyance of cut stone but including all labour charges scaffolding curring, pointing etc complete with standard specifications. The lime used shoud be sourced is highly iron fortified and suitable for structural and masonry works.

Scraping the existing paint throughtly and Painting two coat with approved water based Exterior Emulsion over the plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vimanams/Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in heights, lifting of materials, cost of brushes etc, complete which including all extra for foldings 100 sft, superficial area.

Upto 15' feet ht

Upto 25' feet ht

Upto 50' feet ht

upto 100 feet ht

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing ladder arrangements, country wood plank for working, inspection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work.

Upto 15' feet ht

Upto 25' feet ht

Upto 50' feet ht

Upto 75' feet ht

Upto 150' feet ht

Clean removal of old paint from the surface of wooden door and Painting old wood work with two coats of synthetic enamel paint of approved quality and color over one coat of primer in all floors include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Supplying and fixing teak wood temple type door using well seasoned best quality teak wood including wrought and put up all materials, labour charges and fixing in position including all furniture fittings making grows in the frame and door shutter etc complete with standard specifications. Above 7' ht

Supplying and fixing teak wood temple type door using well seasoned best quality teak wood including wrought and put up all materials, labour charges and fixing in position including all furniture fittings making grows in the frame and door shutter etc complete with standard specifications. upto 7' ht

Painting new wood work with two finishing coats with synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat including brush, labour charges etc, complete complying with standard specification.

Dismantling the brick/stone masonry in cement mortar under 3mm height clearing away the debries from the work site and depositing the same at the place as shown by the departmental officers

Brick work in Lime mortar1:1.5 using Third Class Country Bricks Kiln Burnt of size 83/4" x 41/4" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges, curing etc completc complying with standard specification. For parapet wall

Plastering with Lime mortar 1:1.5, 12mm thick including cost and conveyance of all materials and all labour charges, curing finishing etc, complete complying with standard specifications.

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing new sudhai vigrahams in the vimanams and Rajagopurams with copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Lime Mortor 1:1.5 finishing the same with Lime Mortor 1:1.5 bringing to the correct shape (Lakshana) in conformift with silpa sastra inclusive of special ornaments, wiapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and G.I. rods.binding wire all labour for working in heights, curing lifiting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is pt\rovided the rate with peetam may be adopted as datailed hereunder) 3'6" to 4'6"

ELECTRICAL WORKS Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Supply and fixing of 20W 4’ LED IP40 and IK02. BN100C LED 40 Fitting with WW LED (Philips) with PVC copper wire from terminals to fitting

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 0.7 mtr down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 7W/9W LED for BH point.

Supply and fixing of 23W LED 6" Round Surface type fitting with necessary accessories and electrical connections complete. (Make: Orbit / Philips /equivalent

Supply and run of 5 core 2.5 sq.mm flexible copper wire with necessary accessories with electrical connections complete.

Supply and fixing of 375 mm (15") sweep (Heavy duty) AC Exhaust fan complete without provision.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan

Supply and fixing of 450mm 18" Almonard Wall Fan with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection.

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.

Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and run of 2 of 4 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling or in existing duct with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (Set plug)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp. (For Urchavar and Guru Bhagavan sannadhi outer)

Supply and fixing of 100W LED Focus / Flood light fitting complete with 1" dia GI pipe supports between the walls with suitable MS clamps, painting and electrical connections complete.

Supply and fixing of sintex box (SMC) with 1 no. 6-32A SP MCB, 16A bakelite connector on a hylem sheet ith inter onnections complete.(For street light lights / focus / flood lights)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board withdouble door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and Laying of 3½ x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 70 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 70 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 2 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 3 x 150W LED street light fitting complete with 9 Metre Length Double Bracket Pole with Base Plate (300 x 300 x 6mm) (SR pg no. 149, item no 1-n) 114.30mm OD x 5.40mm Thick x 5000mm Length, 88.90mm OD x 4.85mm Thick x 2000mm Length, 76.10mm OD x 3.25mm Thick x 2000mm Length complete with concreting and Masonary work for fixing the sintex box with hemispherical top cover with 4" x 4" junction box with IP 67 protection with PVC unsheathed copper leads in flexible green hose, MS clamps and aluminium painting

Supply and fixing of 125A (500V) three phase meter box fabricated with 16 SWG CRCA Sheet comprising of with 3 nos. of 200A fuse units, 1 no. neutral link, 1 no. 125A TPN SDF, provision for fixing TNEB meter with inter connections and with required accessories on wall complete.

Supply, Erection, testing and commissioning of 125 A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers. 1. 125A FP Changeover switch -1 No. 2. 63A TPN Switch interior with HRC fuses -5 Nos. 3. 32A TPN Switch interior with HRC fuses -3 Nos. The busbar chamber shall consist of 4 Nos 25mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses. The 25mm x 6mm copper flat for interconnection between TPN switches to buses. 25mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (Note: All SDF unit shall be of L&T / Siemens make)/ equivalent

Supply and fixing of 125 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply, erection, commissioning and testing of 63 KVA Diesel generator with acoustic arrangements in accordance with CPCB norms, water / coolant oil cooled type engine with 90 BHP at 1500 rpm under NTP conditions with following specifications. The engine should have turbo charged, should be provided with air cleaner, base frame, crank case, lubricating oil, fan and fan drive, fuel and oil filters, flexible fittings, exhaust governor, hydro-mechanical gauges for fuel pressure and oil pressure, tachometer, digital water temperature gauge, charging arms, muffler, exhaust pump for fuel priming, fuel transfer, jacket with radiator engine oil, safety set ups with engine shutdown system for LLOP including the set of tools, spares as supplied by the manufacturer along with the Engine. The alternator should have brushless self-excited Y connected, self-regulated of continuous rating, developing an output of 24KW at 0.8 power factor lagging, 415 V, 3 phase, 50 Hz at 1500 rpm with a voltage regulation of ±1 % under steady state condition with over speed capacity of 10% for 5 minutes withstanding capacity with class H insulation, ingression protection of IP23 with topicalization. The alternator is to be designed, built & tested to IS, BS, IEC or any other equivalent Indian or International Standards.\The engineer should be provided with suitable electrical starting system including, suitable radiator arrangements with suitable fully charged new batteries and with other connecting accessories. microprocessor based genset controllers display and displayed at phase voltage & currents, Frequency, reverse Power, Genset KVA, KW, KWh, KVAr, power factor, canopy temperature, lube oil pressure, engine temperature, RPM, run hours, number of starts, fuel level, auto / manual stop, battery charge condition. The fuel tank should be fabricated with 14 SWG CRCA MS sheet steel inbuilt removable type sheet metal fuel tank with fuel gauge drain plug and fuel connections, fuel level indicator and with a capacity of not less than 75 Ltrs. Provisions are to be made to filter the sediments, water in the fuel at rear side and provision of vent at top to release the air pressure in the tank. The tank should be painted with noncorrosive and non-flammable paint. The fuel tank should be filled with a minimum level of fuel for test running on full load. The genset should be placed on a concrete bed of suitable dimensions as per PWD standards. (Make: Ashok Leyland / eqluivalent

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and providing electrical safety & firefighting accessories complete as detailed below. (a) ABC type 6kg fire extinguisher - 1 No (b) ABC type 2kg fire extinguisher - 1 No ( c) 11 KV Rubber mat of size 2m x 1m conforming to IS - 1 Unit (d) First aid box complete with all first aid medicines (e) Shock treatment chart fixed in glass frame - 1 No (f) Fire buckets - 4 Nos with MS angle frame stand - 1 No (g) Hand gloves 11KV grade - 1 Pair (h) Danger board with danger caution sticker notices - 1 Set

Sub Total

GST 18%