Hindu Religious Institutions And Charitable Endowments Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Hindu Religious Institutions And Charitable Endowments - HRICE Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date18 Mar 2024
Closing Date6 Jun 2024
Tender Amount₹ 12,86,09,654
Costs
EMD
₹ 6,53,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HRCE_448898_1Bid Award Id
ViewTender No
01-L-2024-AVRTender Authority
Hindu Religious Institutions And Charitable Endowments ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Grade Beam
2869.48
-
-
Supplying and erecting Centering for sides and soffits including necessary supports and strutting upto 3.29 M height orplane surface as detailed below in all floors with all cross bracings using mildsteel sheets of size 90 X 60 cm and 10BG stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size10cm x 6.50 cm spaced at abote 90cm centre to centre and supported by Casurina props of10cm to 13cm dia spaced at not more than 75cm centre to centre etc. Complete complying with Standard specifications. (payment for Centering shallbe given after the Concrete is laid).
-
-
-
For Plane Surface Such as RCC floor slab & Columns
2843
-
-
Circular Columns
1765
-
-
Column
2574
-
-
RC WALL
335
-
-
Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
For foundation and Basement
525
-
-
Upto 4.5m Ht
300
-
-
Above 4.5m Ht
355
-
-
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
For foundation and Basement
256.5
-
-
Ground Floor- Above basement
193
-
-
Terrace Floor
60
-
-
Supplying and fabricating and placing in position Mild steel / Ribbed Tor steel grills for all RCC works as per Design given Including cost of steel and GI binding wire in all floors etc. Complete complying with standard specifications. ( Contractor has to make his own arrangements for the supply of steel and binding wire)
2343.32
-
-
Providing Brick work in Cement Mortar 1:5 (One Cement and Five sand) using best quality II class table moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" forFoundation and basement including Curing etc., Comple Complying with standard specifications.
-
-
-
Foundation & Basements
219
-
-
Providing Brick work in Cement Mortar 1:6 (One Cement and Six sand) using best quality II class table moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" forFoundation and basement including Curing etc., Comple Complying with standard specifications.
-
-
-
Ground floor
287.5
-
-
First Floor
195.5
-
-
Second Floor
5
-
-
Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4" x 4-1/4" x 2-1/4" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
205
-
-
Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
2433.5
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
2277
-
-
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
6990
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
188
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
2543.5
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
-
-
-
Ceiling Plastering & Wall Plastering Works
9115
-
-
Post Tensioning Work:
Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc.Note: (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.
690
-
-
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
2000
-
-
Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.
-
-
-
Main door
11
-
-
Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.
107
-
-
Supplying and filling in foundation, basement, etc with filling SAND in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
359
-
-
Supply and Installation of Zinc rich primer on steel reinforcement for anticorrosive coating including for the buffing and cleaning the rod by using mechanical means and remove the other particles or dipping the rod into the material. Including, man power, tools and tackles etc., complete as directed by engineer in charge.
233842.5
-
-
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
2311
-
-
Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.
8547.5
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
494.3
-
-
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
583
-
-
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
52
-
-
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
2.5
-
-
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
29
-
-
Dadooing walls with Glazed tiles of sizes 300 X 450 X 8mm sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
200.5
-
-
UPVC Window Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
85
-
-
Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.
22
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with
93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
5
-
-
UPVC Ventilator Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
10
-
-
Special Works : Parapet Design Cornice Works as per the elevation drawings the rate is inclusive all the Materials, Labours, Machiners, scaffolding charges etc., complete complying with standard specification @ Archagar Quarters, Library & Auditorium Buildings
121
-
-
Special Works : Front Column Design & Windows Works as per the elevation drawings the rate is inclusive all the Materials, Labours, Machiners, scaffolding charges etc., complete complying with standard specification.@ Archagar Quarters
19
-
-
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls /Brick Masonry in cement mortar walls under 3m high
-
-
-
Upto 3m Height
55
-
-
Upto 3m-4m Height
19
-
-
Upto 4m-5m Height
52
-
-
Special Works : Front Column Design & Windows Works as per the elevation drawings the rate is inclusive all the Materials, Labours, Machiners, scaffolding charges etc., complete complying with standard specification. @ Library & Auditorium Buildings
2
-
-
Supplying and Paving the Paver Block flooring using Rubber mould paver block ( Colour ) of standard size over the sand filling of 83mm thick, including laying Compacting with power machine including loading transportation and colour pigments of paver blocks, including cost and conveyance of all materials labour etc complete with standard specification.
430
-
-
Precast Kerb Works - R.C.C. 1:2:4( One Cement Two Sand Four Coarse aggregate) precast slab using 20mm size HBG jelly excluding cost of steel but including molding, laying concrete curing finishing and fixing etc., complete
1550
-
-
Supply and Planting of healthy vetiver saplings having stringent specifications comprising, Shoot size 8” with minimum root size of 2”, 20 com spacing between two slips in column, 25 cm spacing between two rows and 20 clumps per m2 with each clumps having 3 Slips including all allied logistics with Jute mat of minimum 500 GSM thick, deployment of skilled man power until watering for 3 days
300
-
-
Plain Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
9
-
-
Supplying and Filling of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.
50
-
-
Supply, stacking & filling of red earth at site to the departmental guage for pre-the departmental guage for premeasurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seigniorage charges,cost of transportation,loading,unloading,stacking and inclusive of all taxes etc.,complete.
45
-
-
Planting of G2 grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
300
-
-
Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and Pointing With Cement Mortar 1:5 etc complete.
3300
-
-
Procuring and planting specified trees & Shurbs height, supporting it with a sturdy stake put into the pit by the side of the saplings and tied to it. The spacing, location and other details as per the drawings and specifications.supply laying ,transportation& mixing of soil improvement nutrients including manure as required in all pits ,flooding with water, dressing including removal or rubbish & surplus earth if any with all leads & lifts, planting & stacking in full & final location including all locations specified, finally fine dressing, levelling etc. including maintenance of plants for a period of 3 months , replacement of any dead & sickly plants in this period, supply & spraying of insecticides as required .
-
-
-
Murraya Paniculata (HEDGE)
300
-
-
Duranta Erecta (HEDGE)
750
-
-
Ixora Coccinea (4')
18
-
-
Thuja Oreantalis (5')
18
-
-
Leucophyllum Frutecens
18
-
-
Cassia Javanica (8')
8
-
-
Cassia Fistula (8')
12
-
-
Tabebuia Avellanedae (8')
4
-
-
Roystonea Regia (8')
4
-
-
Dianthus caryophyllus (Red)
400
-
-
Dianthus caryophyllus (Yellow)
200
-
-
Dianthus caryophyllus (White)
100
-
-
Cocos Nucifera (Coconut) 3' ht
8
-
-
Ficus Religiosa (Peepal) 8' ht
4
-
-
Magnifera Indica (Mango) 5' ht
4
-
-
Stenostaphrum Secundatum (shade grass only dibbling)
8
-
-
Supplying of cut stone for walls, Pillar , Pavukkal , Uthiram , Bodiyal and all works excluding labour charges but including cost and conveyance loding and unloding etc. complete with standard specification
88
-
-
Labour charges for Cut stone masonary work in Cement Mortar 1:5 (One Cement Five Sand) excluding cost and conveyance of cut stone but including all labour charges scaffolding etc complete with standard specifications.
88
-
-
Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
4
-
-
Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
6
-
-
Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
6
-
-
Brick work in Cement Mortar (1:5) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifiction.
9
-
-
Dry Brick work in Cement Mortar (1:6) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifiction.
4
-
-
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
15
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
80
-
-
Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
30
-
-
supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 2 nos. 30W LED street light fitting with LED (Lower end) with 2 nos 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .(DATA-A)
11
-
-
supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 534)
43
-
-
Design, Supply, Testing and commissioning of 12 Meters Mini mast lighting unit Bajaj / Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met / sec wind Velocily and above . The Mini mast structure should have hend hence . Single ring and provided with galvanized lantern carriage suitable for and with 4 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung & feeder pillar Box with Automatic timer system including wiring etc , complete as specified in the relevant ISS . (Approved by PWD) (M-2137)
8
-
-
Erection of the Mini Mast by providing Concreting 1 : 2 : 4 Mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestal with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T / M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor plate & Tmeplate etc. complete as per standard specification of IS -875-1987 . (Approved by PWD)
8
-
-
Supply and fixing of Havells - 70W LED Fitting with Necessary Wall Grouting clamps with Fixing bolts on ceilling with PVC unsheathed Copper leads from terminals to the fitting.
8
-
-
Supply and fixing of 1 no 12W LED Modular Bettard Light (Waterproof) 3'0" height in ground with concrete and construction work with necessary connection.
164
-
-
Supply and fixing of 1 no 9 W spot light fitting on ceiling or false ceiling with necessary connection.
19
-
-
Supply and fixing of ornamental decorative 15W LED ornamental fitting and moulded cast iron stand with necessary masonary works.
45
-
-
Supply and fixing of wall mounted down lamp fitting with 2 nos 9W LED bulb for up and down white/warm white on wall or pillar with necessary connection.
21
-
-
Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
350
-
-
Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
1545
-
-
Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection .
340
-
-
Supply and laying of 3-1/2 x 50 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
580
-
-
Supply and clarnping of 3-1/2 x 50. PVC LTUG armoured cable on post or on wall with MS clamps.
65
-
-
Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection .
16
-
-
Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
16
-
-
Supply and fixing of Four pole sheet steel enclosure with 1 no 30 A FP isolator on wall and necessary connection for motor control.
1
-
-
Supply and laying of 4 x 10 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
20
-
-
Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
10
-
-
Supply and fixing of brass cable gland for 4 x 10 sq.mm. LTUG armoured cable with earth connection .
2
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
188
-
-
Supply and fixing of 4 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 9 nos. 6A to 32A SP MCB & 1 nos 32A TPMCB as outgoing in flush with wall with earth connection only. Lower End.
8
-
-
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End.
2
-
-
Supply and fixing of 6x4 inch size SMC Junction box for cable termination, testing etc.
164
-
-
Supply and fixing of ornamental Aluminium water proof Gate light fitting on Gate pillar with 0.75 mt 50mm GI pipe with lock and key arrangment MS box and supply and fixing of 1 No 5A SP switch 1 no 16A Fuse unit with necessary connection.
2
-
-
Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End.
29
-
-
Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting.
58
-
-
Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete
1
-
-
Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete
2
-
-
Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
1
-
-
Supply of 1 No 62.5 KVA Diesel Generator set of 0.8 P.F Three Phase 415 / 420 Volts, 50c/s, 1500 RPM as detailed below with (AMF) Panel Main Failure A.ENGINE Water cooled diesel engine suitable for Generator application with a shaft output of 310 BHP 1500 RPM under NTP conditions as per BSS 5514 / IS 10000.The Engine shall comprise the following standard scope of supply: (Make Kirloskar Green / Cummins) ( SR )
1
-
-
1.Dry Type Air Cleaner 2.Expansion bellow 3.Radiator, Radiator fan and mounting 4.Air to air charge 5.Exhaust Gas turbo charger 6.Lube oil cooler and Lube oil filter 7.Fuel filter (pre and Micro) 8.In-line Mono - block fuel injection pump with governor and fuel feed pump. 9.Electronic governor 10.12 V Battery charging alternator
11. 12V Volt electric starter motor 12. Engine test Certificate 13. Residential Muffler 14. Fly Wheel with Housing 15. Exhaust silencer
-
-
-
SAFETY SYSTEM OF ENGINE The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating Oil Pressure 2. High water temperature 3. Vee-belt failure and over spee
-
-
-
The following visual indicator should also be provide Low Battery Indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load
-
-
-
B.ALTERNATOR: Alternator capacity of 62.5KVA / 50KW, AC 3 phase, 50HZ, 415Volts, 0.8 P.F 4 wire self excited, self regulated designed to run at 1500 RPM under NTS conditions conforming to BS 5514 / ISO 3046/ISO 8528 (part-II) 1992 to be coupled directly to the Diesel Engine and test cerfiticate (Make Kirloskar Green / Cummins) C) AMF CONTROL PANEL: The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connecting incoming and outgoing leads have been made on the control panel complete set.
-
-
-
1) 1No AC Ammeter and selector switch 2) 3Nos current transformer with suitable Ratio 3) 1No Ammeter selector switch 4) 1No AC voltmeter 5) 1No Voltmeter selector switch 6) 1No Frequency meter 7) 1No KWH meter 8) 1No power factor meter 9) 1No KW meter 10) Battery charging set comprising of the following for charging the battery from mains. a) Transformer/Rectifier b) DC Ammeter c) Charging rate selector switch d) DC voltmeter e) Circuit breaker f) Voltage Regulator g) ON/OFF switch
-
-
-
11) 1set Air break contactor with auxiliary neutral contactor for main supply. 12) 1set low voltage HRC fuse for the short circuit protection of the main supply. 13) 1set alternator contactor with auxiliary neutral contactor. 14) 1set three pole bimetal release for over load protection of the alternator. 15) 1set low voltage HRC fuse for the short circuit protection of the alternator 16) 1set DC control relays incorporating engine start/stop and failure to start/lockout 17) 1set selector switch auto/manual 18) 1No push button “Start” 19) 1No push button “Stop” 20) 1No push button “Reset”
-
-
-
21) 1No signal lamp for indicating load on mains 22) 1No signal lamp for indicating load on set 23) 1No signal lamp for indicating set fails to start 24) 1No signal lamp for indicating ‘Set running’ 25) 1No signal lamp for indicating ‘Battery charger ON’ 26) 1set pilot lamps of 3Nos 27) MCCB of 125A capacity with magnetic thermal over load release, instant short circuit trip and under voltage release switch. 28) Rectangular copper bus bars (1No for each phase, neutral and earthing terminal) of adequate capacity duly colour coded with head shrinkable PVC sleeves. 29) 1No mains voltage monitor
-
-
-
30) Hooter/Audio alarm for indication set fails to start and for DG O/L 31) 1set timers 32) Audio and visual indication arrangements for
a) Low lubricating oil pressure b) High water temperature c) Over speed
33) 1No Earth fault relay 34) Isolator to Isolate the neutral
-
-
-
Note:1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements. 2. The engine should trip for the following conditions. a) Low lubricating oil pressure b) High water temperature c) Over speed 3.Supply and fitment of Auto mains failure panel 1EB service with 125Amps switch and contactors SUF control relays timers etc.
-
-
-
D. ACOUSTIC ENCLOSURE Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet. The Silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC machines to maintain dimensional accuracy of hole within 0.1mm . Power coating done after seven - tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 kg/ m density Mineral wool of 100mm thickness as acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt . Distance shall be less than 75 dB average or as per CPCB norms
-
-
-
E. BASE FRAME Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be proivision for mounting of acoustic enclosure on it.The supply of Gen set includes loading, unloading and transportation charges.
-
-
-
F. FUEL TANK 150 Ltrs. Integral Built in Fuel tank shall be fabricated out of 14SWG CRCA MS sheet and its part of base frame. It is duly painted and fitted with inlet and outlet connections and mechancial fuel gauge.
-
-
-
Supplying and filling of Diesel to run and test the generator at full load for 8 hours
-
-
-
G. BATTERY
-
-
-
1 No 12V 150 AH Battery
-
-
-
h. Supply of maintenance manual books with engine and alternator Parts list. i. Supply of tools required for the Maintenance and operations of the Generator set. j. Mounting of starting batteries of 1/2" thick hylem sheet base with suitable angle iron frame work support on the floor by the side of generator set to conform to latest CEIG conditions. k. Supply and laying of annunciation cable of suitable capacity and length between engine and the control panel of the generator set / Rate for item (a) to (k)) (SR)
-
-
-
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.
2180
-
-
Supply and laying of 3-1/2 x 95 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
80
-
-
Supply and clarnping of 3-1/2 x 95sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
40
-
-
Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection .
4
-
-
Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.
4
-
-
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
20
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
9
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
85
-
-
Supply and fixing of 12 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.250A 4P MCCB switch as incoming and 10 nos.63A 3P MCB ,6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only.
1
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End
32
-
-
Supply and fixing of WT bulk head fitting with guard suitable for 9W CFL LED Bulb with electrical connection.
19
-
-
Supply and fixing of 9 W LED bulb for BH point.
14
-
-
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.
61
-
-
Supply and fixing of 375mm (15") sweep (heavy duty) AC exhaust fan complete without provision of holes in the wall .
2
-
-
Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall.
2
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall
12
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.
10
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End.
9
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Lower End.
5
-
-
Supply and fixing of Douple pole sheet steel enclosure with 1 no 30 A DP isolator on wall and necessary connection for street light control
1
-
-
Supply and fixing of 1 no.6/16 A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End.
5
-
-
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Lower End.
2
-
-
supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Lower end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
36
-
-
Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.
1
-
-
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.
65
-
-
Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dualflush fittings with normal seat cover Wall Fitting
12
-
-
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
12
-
-
Supplying and fixing in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. -
4
-
-
Providing and fixing of White Urinal partition Ceramic of approved make for Urinal border with necessary supports, bolts, nuts, etc.of Engineer-in-charge.Partition size 69x16.5x32.5cm
4
-
-
Supplying and fixing CP Two Way Bib Cock with Health Faucet with flow Rate of 3.78 LPM at 3 Bar pressure including flexible hose 1m/1.2m long connection and holder for hand spray ,making good the same, complete.of Engineer-in-charge.
12
-
-
Suppling and fixing in position 15mm.diameter brass / C.P screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary
2
-
-
Supplying and fixing in position C.P.Shower rose Shower Rose - 100mm dia & CP Wall Mixture Tap 3 in 1 system with Hand Showers of approved make confirming to IS specifications and qulity including cost of Shellac thread etc. complying with standard specification.
2
-
-
Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications
8
-
-
Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.
8
-
-
Supplying and fixing in position Stainless Stee Sink of size 600mm x 450mm x 200mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.
2
-
-
Supplying and fixing in position SS Swan Neck Tap suitable with kitchen sink etc. complete complying with standard specification.
2
-
-
Supplying and fixing in position Indian make bewelled edge mirror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc. complying with standard specification.
4
-
-
Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.
26
-
-
Internal Water Supply P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
-
-
-
20mm dia Pipe conceled water supply
90
-
-
25mm dia Pipe
230
-
-
32mm dia Pipe
30
-
-
Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
-
-
-
Coupler
-
-
-
20mm conceled
45
-
-
25mm dia Pipe
115
-
-
32mm dia Pipe
15
-
-
Elbow
-
-
-
20mm conceled
45
-
-
25mm dia Pipe
115
-
-
32mm dia Pipe
15
-
-
BEND
-
-
-
20mm conceled
45
-
-
25mm dia Pipe
115
-
-
32mm dia Pipe
15
-
-
Tee
-
-
-
20mm conceled
45
-
-
25mm dia Pipe
115
-
-
32mm dia Pipe
15
-
-
End Cap
-
-
-
20mm
45
-
-
25mm
115
-
-
32mm
15
-
-
Reducer
-
-
-
20mm
45
-
-
25mm
115
-
-
32mm
15
-
-
Reducer Tee
-
-
-
20mm
45
-
-
25mm
115
-
-
32mm
15
-
-
Reducer Elbow
-
-
-
20mm
45
-
-
25mm
115
-
-
32mm
15
-
-
Jet Nipple
-
-
-
25mm
50
-
-
32mm
15
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
25mm
20
-
-
32mm
2
-
-
40mm
1
-
-
50mm
4
-
-
65mm
1
-
-
Supplying and fixing of approved make of GM Non return valve, suitable for both horizontal & vertical application conforming to BS 1982 tested to a pressure of 15 Kg/sqcm. Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-Incharge.
-
-
-
50mm
2
-
-
Supplying and fixing of GI. puddle flanges (IS 1239) fabricated out of 6 mm thick M.S. plate of size 300 x 300mm plus dia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.as directed by Engineer-Incharge.
-
-
-
40 mm dia
1
-
-
50 mm dia
1
-
-
Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
-
-
-
110mm dia Pipe internal drainage
45
-
-
75mm dia Pipe
60
-
-
40mm dia Pipe
25
-
-
50mm dia Pipe
15
-
-
Supplying PVC Specials P.V.C pipes soil/ waste pipes (with working pressure 6 kg. / sq.cm.) in water supply arrangements (both in internal and external drainage arrangements
-
-
-
Elbow
-
-
-
110mm Pipe
15
-
-
75mm Pipe
20
-
-
50mm Pipe
5
-
-
Tee
-
-
-
110mm Pipe
15
-
-
75mm Pipe
20
-
-
50mm Pipe
5
-
-
Bend
-
-
-
110mm Pipe
15
-
-
75mm Pipe
20
-
-
50mm Pipe
5
-
-
"Y"
-
-
-
110mm Pipe
15
-
-
75mm Pipe
20
-
-
Reducer
-
-
-
110mm x 75mm
5
-
-
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications.[Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.
10
-
-
Construction of sewer chambers of internal dimension of 600x600mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)
14
-
-
Construction of sewer chambers of internal dimension of 600x750mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)
3
-
-
Construction of sewer chambers of internal dimension of 600x900mm depth upto 1.2 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)
2
-
-
Supplying laying and jointing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride)(Schedule-80) pipes complete with necessary solvent cement weldable fittings, confirming to ASTM F-441 for water supply piping in the pumping system. The pipes shall be erected plumb in the risers. Erection of the above pipe including cutting, jointing of pipes with necessary fittings, erection of the pipes plumb to vertical, clamping the pipes on to MS Hot dip galvenized clamps, pressure testing of pipes, complete.. The pipes shall be laid burried Laying work to include excavating the necessary trenches,cutting and jointing and laying the pipes in the trenches.after laying and pressure testing of pipes, the excavated earth shall be back fill and compacted any excess shall be removed from site.
-
-
-
50mm dia UPVC Sch-80
290
-
-
Supplying UPVC Specials pipes (UPVC Sch-80.) in water supply arrangements (external Hydro Pneumatic System Pumps arrangements)
-
-
-
Elbow
-
-
-
50mm
46
-
-
Tee
-
-
-
50mm
46
-
-
Bend
-
-
-
50mm
46
-
-
Coupler
-
-
-
50mm
46
-
-
Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to the pipes shall be duly laid at site, with necessary cutting & jointing of pipe with approved quality jointing lubricant. The pipes shall be fixed properly aligned and laid to slope. Before handing over, leak test shall be carried out and any defects found shall be rectified. Work shall also include necessary excavation and back filling 'with compaction etc, as directed by Engineer- Incharge (For sewer and Sullage line).
-
-
-
160mm dia Pipe
110
-
-
110mm dia Pipe
126
-
-
Supplying and fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]
100
-
-
Supplying and fixing in position best quality P.V.C rainwater burried pipe (4 kg. per sq.cm) of various sizes having ISI mark and providing leakproof joints including fixing to the chamber with P.V.Cspecials etc., and making connection to all rain water chambers, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.
154
-
-
Construction of percolation well / rain water harvest pit of of required internal dimension of 1.2mtr Dia upto 2.5 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement, With perforated RCC cover, fixed over 100 mm P.C.C, Rungs, etc. The work shall include necessary exacavation and backfilling placing 2 nos of 160mm dia slotted pipe for 5mtr from the bottom of the catch pit, 25mm coarse aggregate (black pebbles) for filteration.
7
-
-
Supply and installation of equivalent approved make,For pumping the Domestice water from bore well to OHT.Each Pumps shall deliver 15m3/hr @ head of 40mtr.,Skid mounted twin booster system with fixed speed system.1 working + 1 stand by. of monoblock pumps mounted on a common base frame, with common galvanised delivery manifold.2no.s of gate valve and 2nos of non return valves.Control panel, Three phase preventer, with dry run control provision.
1
-
-
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
4
-
-
Supplying and fixing in position 1000 litres capacity water tank made up of PVC. of best approved quality as per standard specification etc., complete compying with standard specifications
1
-
-
Supply and Fixing of 32 CH TVT 4K SUPPORT NETWORK VIDEO RECORDER as Instructed by the Departmental Officers
2
-
-
Supply and Fixing of 2mp TVT VANDAL PROOF NETWORK IP CAMERA as Instructed by the Departmental Officers
27
-
-
Supply and Fixing of 2mp TVT IP DOME NETWORK CAMERA as Instructed by the Departmental Officers
12
-
-
Supply and Fixing of 8CH FULL GIGA POE SWITCH PORT as Instructed by the Departmental Officers
4
-
-
Supply and Fixing of POE METAL BOX VANDAL PROOF as Instructed by the Departmental Officers
4
-
-
Supply and Fixing of 48" SMART LED TV as Instructed by the Departmental Officers
1
-
-
Supply and Fixing of WD PURPLE 4TB HARDDISK
2
-
-
Supply and Fixing of CAMERA WATER PROOF 4x4 BOX as Instructed by the Departmental Officers
32
-
-
Supply and Fixing of CAMERA ACCESSORIES
1
-
-
Supply and Fixing of FULL COPPER RJ45 NETWOK CABLE 865 mts as Instructed by the Departmental Officers
885
-
-
Supply and Fixing of POWER CABLE 2.5 sq.mm 3 Core Cable as Instructed by the Departmental Officers
790
-
-
Supply and Fixing of CAMERA UNIT CONFIGURATION CHARGE
1
-
-
Supply and Fixing of 1KVA 10 UPS with Backup EXIDE 120 SINE WAVE INVERTER
1
-
-
Providing New Fire Fighting Arrangements Consists of Following Equipments.
-
-
-
A. NEW ABC6 KG Capacity Fire Extinguisher stored pressure TvDe, Filled with Mono ammonium phosphate 50% powder confirems to IS:14609, applicable on class A,B,C and electrically started Fires, with the fire Rating on 3A & 21B as per IS.15683 Fitted with control Squeeze grip valves, pressure gauges an special Helium Leak detection tested cylinder with ISI Mark HSN CODE:84.24.1000 -----60Nos B.Carbon-Di-Oxide type fire extinguisher 2kg capacity complete set (ISI marks)---------4 Nos C. Carbon-Di-Oxide type fire extinguisher 4.5kg capacity complete set (ISI marks)--------2 Nos D.Safety signature --------67 Nos
-
-
-
New Fire Equipments
1
-
-
Providing New Hydrant System Consists of Following Equipments.
-
-
-
1.Mani mandapam Foundation base a.50 NB (2" inch Pipe) Include Painted------20 mtr b.25 NB(1" inch Pipe) Include Painted------10mtr c.100 NB (4" inch Pipe) Include Painted------20mtr d.80 NB (3" inch Pipe) Include Painted-------80mtr
-
-
-
2.BUTTERFLY VALVE (KARTAR) a.4" inch 100 NB-------3 no b.2" inch 50 NB--------2 no 3.MS Supports angle & "U Clamp Anchor Fastner Bolt Nuts &mm, 10Omm, 12mm----------1 no 4.Sprinkler Bulb set 5.Sprinkler Blub Set Fiting Accessories 6.1" inch ball Valve (1/2", 3/8")-------10 no 7.PIPE LINE FITTINGS ACCESSORIES a.Reducer (6x4" inch, 4x3" inch, 3x2" inch), Rubber Gasket (6 inch, 4" inch, 3" inch), Flanges (6" inch, 4" inch, 160 PCD, 4" inch 8 Hole, 6" inch 8 Hole) Bend's MS Heavy 6" (inch) Bend, 4" (inch) Bend, 3" (inch) Bend-------20 no
-
-
-
8.ADDITIONAL ACCESSORIES a.U Clamp bolt nut, bolt nuts Anchor fastner, Anchor Fastner S/8 5" (50 No), U Clamp Bolt Nut (25 No), Primer (2 Ltr). Signal Red Paint (2 Ltr), Welding Arch (3 Pack), Thread Rod, MS Angle Support (15 No), 1" inch short Pipe Nipple (5 No) 9.NON RETURN VALVE a.4" Wafer types--------1 no 10.Single Hydrant SS Valve with 75 mm inlet and 63mm No's female single outlet complete with PVC cap & chain as per with ISI Mark--------8 no 11.1" inch Atr release valve ball type-------2 no 12.Pressure Gauge----1 no 13.Two way fire brigade Inlet valve-------1 no
-
-
-
14.First aid hose reel drum, swinging type accommodate with 30 Mtr long, 19mm double braided rubber hose (commercial) inclusive PVC, Tripe purpose shut-off nozzle--------8 no 15.RRL Fire Hose 15 Mtrs Length with Male & Female SS No's coupling.-------8 no 16.Supplying of KIRLOSKAR electrical motor driven pump No's of capable to deliver 420 LPM with all necessary accessories like bronze impeller, stainless steel along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation. The pump shall be coupled to motor of 15 HP 415 Volt with speed of 2900 RPM and complete set shall be mounted on common base frame.-------1 no
-
-
-
17.MS Hose Box to accommodate 01 No's 15 Metres length hose and glass fronted-------8 no 18.Branch Pipe SS-------8 no 19.Pressure Switch-------1 no 20.Pump to Panel Board & Pressure Switch Wiring Cost 21.Auto Start Panel 24 Volt for the Electrical Pump-----1 no 22.Material supplying charge 23.Over all complete pipe erection charges 24.Over all complete pump erection charges 25.Over all Transportation Charge & Accommodation
-
-
-
New Hydrant Equipments
1
-
-
Supply and installation of Lightning Arrester system unit on roof of the building / Tower / Gopuram / Vimanam by assembling the ESE Air Terminal - unit of L-model having 86mtrs radius protection with special mounting structure of 4.0 mts height GI/Alu. Pipe and 300x300x8mm MS plate, 3mts-48mm OD Class 'C' GI outer pipe, 1.8m-38mm OD inner pipe on roof mounting with concrete base with the support of fastners and with FRP adapter complete. The said ESE Air terminal (ESEAT) is the main unit of L.A. and it should satisfy and conform to IS standard norms / specifications / CPRI / ITE Testing conditions etc. for the good functioning of the system which should be, as described below.
-
-
-
The ESEAT (Early Streamer Emission Air Terminal) has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field. The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time ( ∆TS) obtained during the lab test for the offered model is 60 us.
-
-
-
The ESEAT works on negative as well as positively polarizes discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). (Page No.37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011.
L-Radius of protection: 86M Level of protection considered for the Project-II level. (LPI Australia Make / FAURSE-UK make ) .
2
-
-
Supply and clamping of 1x70 mm2 S.C. Flexible multistrand PVC unarmoured copper cable in suitable HDPE pipe on post / wall/ ceiling / Gopuram, etc. With M.S. Clamps complete.
60
-
-
Supply and clamping of 1x70 mm2 S.C. Flexible multistrand PVC unarmoured copper cable in suitable PVC rigid pipe on post / wall / ceiling / Gopuram, etc. With M.S Clamps complete.
6
-
-
Supply and laying of 1x70 mm2 S.C. Flexible multistrand PVC unarmoured copper cable in a trench to be excavated at a depth of 0.75mtr putting 0.15 mtr. Layer of sand and covering the cable completely with bricks and sand refilling the earth to make good.
4
-
-
Supply and fixing Test link Box for each down conductor inorder to disconnect the earth termination system to enable measurement of Resistance on suitable angle iron frame work with cable entry boxes on wall with earth connection complete.
2
-
-
Supply and installation of maintenance free G.I. Earthing system comprising of 50mm dia and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly Backfill Compound and suitable clamp complete.
2
-
-
Supply and installation of steel fibre Reinforcement concrete precast readymade earth pit chamber of size 450x450x200mm base with cover materials conform to standard IS 12592 complete. (MR)
2
-
-
Providing Scaffolding arrangement for Gopurams upto 75 feet height with casurina posts, coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.
46
-
-
Supply and providing cable end termination for 1x70sqmm PVC flexible copper unarmoured cable with suitable copper cable sockets by crimping with Electrical connection complete.
12
-
-
Supply and fixing of Lightning Strike Recorder of good brand like LPI or equivalent make conforming to IS standard on wall with suitable angel iron frame work with cable entry boxes which is designed for easy mounting on the down conductor to effectively count the number of lightning strikes captured by the Air Terminal. This recorder works at minimum sensitive range of 1500A to a maximum sensitive range of 1500A to maximum of 22KA @ 8/20 micro seconds with protection class of IP67(IEC529). It is CPRI tested one and is self powered and not the usage of battery or any other external power source etc. complete.
2
-
-
Add GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements