Hindu Religious Institutions And Charitable Endowments Tender

Supplying and errecting for sides and soffits including supports and strutting upto 3.29m height for plane surfaces such as RCC slabs rectangular beams, lintels,bed blocks, rectangular or square columns, vertical slabs etc as detailed below with all cross bracing using mild steel sheets of size 90cmx60cm and B.G 10 stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over M.S spans spaced at about c/c and supported by 50mm dia M.S pipe with adjustment jacks spaced at 75 c/c etc complete complying with standard specification and as directed.

For column Footing & Grade Beam and stair case etc

For Rcc columns,,sunshade etc

For Roof level Beams,Roof slabs etc

Curved Portion for Kodungai

Providing and laying in position, Reinforced Cement Concrete Mix of grade M-25 in accordance with IS:456- 2000,using 20mm and down graded hard broken granite stone jelly RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture ( plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, ratard setting of concrete, improve workability without impairing strength and durability with above ( 5.0 cu.m)7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators,finishshing,curing, etc., and providing fixtures in the RCC floor/roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirement of IS standareds.( No separate payment will be made by the Department for the excess usage of materials)

For foundation & basement

For Super structure

Supplying,fabricating and placing in position of steel reinforcement using mild steel or ribbed tor steel grills for all RCC works as per the design given including cost of steel and binding wire in all floors complying with standard specification and drawing.

BRICK WORK in cement mortar 1:5 (One cement and five M-sand) using second class chamber burnt bricks of size 9" * 4 3 / 8" * 2 3 /4" for the following including curing etc., complete complying with standard specifications and as directed by the department officers

Up to Basement - Cement mortar 1:5

In Ground Floor-C.M 1:6

Supplying and filling in foundation and basement with filling Gravel including cost and cnveyance charges, well watered rammed and consolidated complying with relevant std specification including filling charges etc

Supplying and filling in foundation and basement and trenches with FILLING M-SAND in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc.,complete.

Flooring with cement concrete 1:5:10 (One cement, five M-sand and ten metal) using 40mm gauge hand broken hard granite stone jelly and including centering and well consolidated etc., complete complying with standard specification.

Flooring with Cut stone slab of size 600mm x 600 mm and other sizes suitable for site requirement not less 100mm thick with machine cut edges top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and pointing with Lime mortar 1:5,etc complete complying with Standard Specifications.

SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs etc., with cement mortar 1:3 (One cement and three P-sand) 10mm thick including hacking the surfaces and providing necessary cement mortar nosing beading as per standard size and specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specification

PLASTERING with cement mortar 1:5 (one cement and five M-sand)12mm thick in all floors complying with standard specifications.

Weathering course concrete using best quality brocken brick jelly of size 20mm uniform gauge in pure slaked lime 9no sand) in the proportion of brick jelly to lime being 32 to 12.5 by volume and finished by beating the concrete with wooden beaters to give required slope and sprinkling jaggry water as per standard specification

Finishing the top of weathering course with machine pressed tiles of size 23x23x2 cm of approved quality laid in cement mortar 1:3 mixed with water proofing compound conforming to ISS at 2% by weight of cement used and pointed with the same mortar mixed with red oxide complete

Providing & fixing rain water down fall pipes of 110mm dia 4kg /cm2 pvc pipes with necessary shoes bends clamps screws nails etc complete with standard specifications

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed

Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand;covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.

Brick masonry Lime Mortar 1:2 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including lime, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortar1:1.5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortar1:1.5and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram

Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1.5 finishing the same with LM 1;1.5 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) from 2'6" to 3'6" height

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plant for working, inspection etc, complete hire charges only for erection, maintenance and removing the same on completion of the work1 sq,ft. Up to 15'0" height

Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Supplying and fixing 315 mm OD- PVC Rigid Pipes 6kg/cm2 (PN16 Class 500 ) inclding cost and conveyance of materials to site,earth work excavation,laying and jointing,proper grade and alignment and refilling the earth to pipe trenches etc complete as per standard specifications.

Supplying and fixing Best quality of PVC pipes of 110mm dia 6 Kg per cm2 for under ground wiring purpose including cost and conveyance of materials to site and labour charges for fixing etc complete

Supply and fixing of 200W LED Highbay light fitting complete with suitable MS clamps on ceiling and electrical connections complete. (Model: Saucer genx DD P 200 W (ADV) - Havell's / Eql) (Data A)

Supply and fixing of 150W LED Flood light fitting complete with suitable MS clamps on ceiling and electrical connections complete. {Model: Jetta Adorn - Havell's / Eql) (Data B)

Supply and fixing of 600mm 24" Almonard Wall Fan with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection. (Data C)

Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Lower End (SD 493)

Supply and fixing of 120W LED street light fitting with LED (Higher end) with 40mm dia. GI pipe (class B) with 1 no.40 mm GI bend complete on the existing post/ on wall with 1.5 sq.mm PVC unsheathed copper leads with MS clamps and with painting. (Model: Sunbeam - Havells / Eql) (Data D)

Supply and fixing of 4 way 32A bakelite connector in suitable MS box with cover with painting of suitable colour with earth and electrical connections complete. (Data E)

Supply and clamping of 4 x 4 sq.mm. PVC LTUG armoured copper cable in 40mm dia UPVC pipe (Schedule 40) on post or on wall with MS clamps (Data F)

Supply and clamping of 4 x 2.5 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps (Data G)

Supply and fixing of brass cable gland for 2 x 4 sq.mm / 4 x 4 sq.mm PVC LTUG armoured cable with earth connection (SD 180)

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD 61)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (From Ceiling junction boc to 15A plugs on Pillars for wallmount fans) (SD 422)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal door) with 1 no. 100 A 4 P isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End (Data H)

Supply and clamping of 3½ x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 224)

Supply and fixing of brass cable gland for 3½ x 50 sq.mm. PVC armoured LTUG cable with earth connection (SD 188)

Supply and providing cable end termination of 3½ x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 237)

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps (SD 222)

Supply and fixing of brass cable gland for 3½ x 25 sq.mm. PVC armoured LTUG cable with earth connection (SD 186)

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 235)

Supply and fixing of "Elmeasure" ATeS Automatic 200A with MS Enclosure with following Specification. Size of the Panel 4' x 3.5'xl.5' Mode of Operation:- Selection Mode Auto / Manual / (Re!11ote / RS485 - Optional) Salient Features 1. Automatic Start / Stop Operation of DG on mains failure. 2: Fire Alarm / External fault trip feature is provided. 3. Inbuilt Control $witch for selecting auto / manual mode. 4, High capacity to withstand short circuit. Mounted on suitable MS Panel on suitable angle iron support and Panel Lock with Key for Wall Mounting with necessary connection. (Data I)

Supply and fixing of 125A TPN sheet double break switch with HRC fuse and neutral in existing panel board with electrical connections complete. (Data J)

Supply, Erection, testing and commissioning of 125 A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers. 1. 125A TPN Switch interior with HRC fuses -1 No. 2. 63A TPN Switch interior with HRC fuses -6 Nos. The busbar chamber shall consist of 4 Nos 25mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses. The 25mm x 6mm copper flat for interconnection between TPN switches to buses. 25mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (Note: All SDF unit shall be of L&T / Siemens make). (Data K)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 458)

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works at 18%(9%+9%). { GST Amount is the Total GST Amount for overall quoted amount }