Hindu Religious Institutions And Charitable Endowments Tender

Scraping the decayed lime plastered from the surface of vimanams and gopuram, carefully including isolated bricks of brick work without damaging the varivargams racking out the joint cleaning the surface with water including all working in heights, hire charges for special tools, brushes etc., complete as per standard specifications. upto 15’0" height.

25'0'' Height

15'0'' Height

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-15sft, superficial area.

25'0'' Height excluding Kalkaram

15'0'' Height excluding Kalkaram

Restoration by providing water wash are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc

Pointing with high perfamance finishing to the existing natural stone structure of quality materials in Lime mortar 1:1.5 using lime sourced from area including cost of special tools, watering, curing etc, complete.

Plastering with Lime mortar1:1.5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Painting two coats with approved water based Exterior/interior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of Pressed Tiles & Weathering course (si.no.32, sch.item.no.38B, page.no.22 S.R 2021-2022) etc., complete complying with standard specification.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime over stone slab roof to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles 20cmx 20cmx2cm of approved quality laid in Lime mortar1:1.5,12mm thick mixed with water proofing compound 2% by weight of cement used etc., complete with standard specifications.

Flooring with cut stone slab 600mm x 600 mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the department officers including cost and conveyance of all materials to site and labour charges for paving and pointing with cement mortar 1:5 etc.,complete as per standard specification.

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with standard Specification

Door size 3'0''x5'0''

Door size 3'0''x6'0''

Door size 4'0''x5'0''

Best varnish two coats for wood works etc, complete complying with standard specifications.

Supply and run of 35mm x 45mm powder coated duct with door arrangements. (Data A)

Supply and run of 35mm x 20mm powder coated duct with door arrangements. (Data B)

Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data C)

Supply and run of 3 x 2.5 sqmm Copper wire in suitable PVC pipe in the exsiting duct. (Data D)

Supply and run of 3 x 1.5 sqmm Copper wire in suitable PVC pipe in the exsiting duct. (Data E)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD 299)

Supply and fixing of 40W 4’ LED IP40 and IK02. BN100C LED 40 Fitting with WW LED (Philips) with 2 nos. 15A T-Type Quick Splice Connect Terminal with male spade connector and 1 no. Quick Splice Lock Wire Terminals screw less Push Connector (for Down lighting) (Data F)

Supply and fixing of 18 W 4’ LED IP40 and IK02. BN100C LED 20 Fitting with LED (Philips) with 2 nos. 15A T-Type Quick Splice Connect Terminal with male spade connector and 1 no. Quick Splice Lock Wire Terminals screw less Push Connector (For Queue Lighting) (Data G)

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 0.7 mtr down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD 545)

Supply and fixing of 450mm 18" Almonard Wall Fan with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection. (Data H)

Supply and fixing of 23W LED 6" Round Surface type fitting with necessary accessories and electrical connections complete. (Make: Orbit / Philips / Eql) (Data I)

Supply and run of 5 core 2.5 sq.mm flexible copper wire with necessary accessories with electrical connections complete. (for Gopuram focus lights) (Data J)

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (Twin plug) (SD 466)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (SD 484)

Supply and fixing of 375 mm (15") sweep (Heavy duty) AC Exhaust fan complete without provision. (Data K)

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan (SD 121)

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp. (For Urchavar and Guru Bhagavan sannadhi outer) (Data L)

Supply and fixing of 80W LED Focus / Flood light fitting complete suspended from ceiling by chain with 1" dia GI pipe supports between the walls with suitable MS clamps, painting and electrical connections complete. (Data M)

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 751)

Supply and clamping of 3½ x 120 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 227)

Supply and fixing of brass cable gland for 3½ x 120 sqmm PVC armoured LTUG cable with earth connection. (SD 191)

Supply and providing cable end termination of 3½ x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 240)

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 746)

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 222)

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection. (SD 186)

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 235)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe in existing duct or on wall with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 56)

Supply and fixing of 63A 4 way triple pole neutral MCB Phase selector distribution board in sheet steel enclosure double door of type with metal door with IP42 protection with 3 nos. 63A Phase selector switches, 63A 4 pole MCB isolator. 63A FP RCCB as incoming, 12 nos. 6-32A SP MCB as outgoing on suitable angle iron frame work with painting of suitable colour. The MCBDB and MCB's should be with the ISI mark (Higher end) (Data N)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 609)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 598)

Supply and fixing of 3 x 150W LED street light fitting complete with 9 Metre Length Double Bracket Pole with Base Plate (300 x 300 x 6mm) (SR pg no. 149, item no 1-n) 114.30mm OD x 5.40mm Thick x 5000mm Length, 88.90mm OD x 4.85mm Thick x 2000mm Length, 76.10mm OD x 3.25mm Thick x 2000mm Length complete with concreting and Masonary work for fixing the sintex box with hemispherical top cover with 4" x 4" junction box with IP 67 protection with PVC unsheathed copper leads in flexible green hose, MS clamps and aluminium painting (Data O)

Supply, Erection, testing and commissioning of 125 A capacity dust and vermin proof horizontal type cubical panel board made up of 16 SWG CRCA Sheet with supply and fixing of the following interior switches with HRC fuse links arranged horizontally with horizontal busbar chamber and cable chambers. 1. 125A TPN switch disconnector fuse unit interior only with HRC fuses double break-1 No. 2. 32A TPN switch disconnector fuse unit interior only with HRC fuses double break-4 Nos. 3. 63A TPN switch disconnector fuse unit interior only with HRC fuses double break-4 Nos. The busbar chamber shall consist of 4 Nos 33mm x 6mm copper flat for phases and neutral and interconnection between incoming switch and buses. The 38mm x 6mm copper flat for interconnection between 10 Nos 63A TPN switches and 2 nos 32A TPN switch to buses. 38mm x 6mm copper flat buses shall be mounted on SMC busbar insulator at proper and sufficient interval as per IE rules. The busbar chamber shall be segregated from the adjacent chamber. The heat shrinkable sleeves shall be provided for busbar with colour code. The 25mm x 3mm copper flat for double earth connection for all incoming and outgoing switches are to be provided in this panel. The panel shall have powder coated painting of approved colours, approved by the department officers. The danger board shall be fixed at front of panel board. The panel shall be mounted on MS base channel provided all round at the bottom of the panel. The whole arrangements shall be erected on a Masonary pedestal to be constructed with suitable foundation with bolts and nuts such that the lowest SDF unit fuse handle is at a height of 0.75m from the ground level. (note: All SDF unit shall be of L&T / Siemens make). (Data P)

Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 738)

Supply and fixing of TNEB powder coated meter box of 16 SWG suitable for 200A Three phase service connection with 3 nos. of 200A fuse unit (500V) 200A neutral link, 200A Double break interior switch with HRC fuses and earth link (1" x 1/8" copper flat) on on wall with earth connection and inter connection with 19/16 PVC insulated copper wire from EB meter to fuse unit (Data Q)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 458)

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}