Hindu Religious Institutions And Charitable Endowments Tender

Renewal by Supply and Fixing of Single Box type fitting with 1 No.20W Direct LED Tube Complete Set fixing on Existing wiring tray with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Equ make) (DATA-A1)

Supply and fixing of 30W focus light with special clamps with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Equ make) (Higher end) (DATA-A2)Model: CWFGGR PSU

Supply and fixing of 50W, LED Flood Light 4500lm, 3000K Warm White color temperature, Die-cast aluminium housing (heat sink) for efficient thermal management, sturdiness & excellent corrosion resistant. SSHardwares, silicon gasket and Cable gland is used for cable entry for effective ingress protection. UV Stablized, polycarbonate cover andPC lens to ensure better light distribution. CRI 70. Powered by anBuilt-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open /Short Circuit protection, Over Voltage protection, Surge Voltage Protection &other safety test as per IS 15885 Part-2/Sec 13. Operatingtemperature:-10°Cto+45°C, Operating voltage range: 220V-240V, Surge Protection 4 kV, IP65 (Higher end Like Havells, Philips, Wipro /equivalent) Model No JET AQUANT OPLUS FLS 50W LED 730P 30DPC

Supply and fixing of 50W, LED Flood Light, 5400 Im, 3000K Warm White color temperature, Purepolyester powder coated die-cast aluminiumhousing in grey finishwith aesthetically designed heat sink for efficient thermalmanagement, sturdiness & excellentcorrosion resistant. M16 glandis used for cable entry. PC reflector for maximum light output. PC lensused for symmetric dictribution. Tempered protective toughenedglass, thermal shock and impact resistant (IK-07) fixed to the housingwith aluminium frame and SS screws. CRI70. Powered by Built-InPotted, isolated electronic LED driver (SMPS based constant currentsupply) with lower THD, Output Open / Short Circuit protection, OverVoltage protection, Surge Voltage Protection upto 10kV (50W) &other safety test as per IS 15885 Part-2/Sec 13.. Operatingtemperature:-10°Cto+45°C, Operatingvoltagerange: 140V-270V, IP65 (Higher end Like Havells, Philips, Wipro/equivalent) Model. JET ALE GANZA FLS SOW LED 730P60 DTOTG

Supply and fixing of 50W, LED Flood Light 6000lm, 5700K, Cool White colortemperature, Pure polyester powder coated die-cast aluminiumhousing in grey finish with aesthetically designed heat sink forefficient thermal management, sturdiness & excellent corrosionresistant. M16 gland isused for cable entry. PC reflector formaximum light output. PC lens used for symmetric dictribution. Tempered protective toughened glass, thermal shock and Impactresistant (IK-07) fixed to the housing with aluminium frame and SSscrews. CRI70. Powered by Built-In Potted, isolated electronic LEDdriver (SMPS basedconstant current supply) with lower THD, OutputOpen / Short Circuit protection, Over Voltage protection, SurgeVoltage Protection upto 10kV (50W) & other safety test as per IS15885 Part 2/Sec 13.. Operating temperature: -10 °C to +45 "C, Operating voltage range: 140 V-270 V, LED Life L70 50000 hrs. IP65 (Higher end like Havells, Philips, Wipro/equivalent) (Data 3)JET ALEGANZA FLS 50w. LED 757 P60 DTOTG

Supply and fixing of 100W IP65 Green Perform prime LED Highbay solution with PDC housing, toughened & shattered proof glass available in wide beam LED Highbay fitting (philips cat no. - BY5155P LED 100S 5700 NR PSU GR/equ) on Fan hooke with 1 foot down rod with fan clamp fixing on ceiling with connection complete etc.(DATA-4)

Supply and fixing of 100w Flood light fitting Tempo Mini is aflood Ighting luminaire with PDC housing and unique flod optics (WB) To Ensure uniform Distribution flood light Philips cat no.BVP182 LED100 CW FG WB 100W 120-270 PSU) fixing on special type of square type bracket clamp complete fixing for Anchor fastner 4 nos with fitting fixing in scaffoldig arranement complete. The fittings with PVC unsheathed copper leads from terminals to the fitting (DATA-5)

Supply and fixing of 200w Flood light fitting Tempo Max is aflood Ighting luminaire with PDC housing and unique flod optics (SYWB) To Ensure uniform Distribution flood light Philips cat no.BVP184 LED215 CWISYWB 200W PSU) fixing on special type of square type bracket clamp complete fixing for Anchor fastner 4 nos with fitting fixing in scaffoldig arranement complete. The fittings with PVC unsheathed copper leads from terminals to the fitting (DATA-6)

Supply and fixing of 28w Post top light fitting Town Glow is a contemprary designer IP66/IK10 Post top lantern with symmetric light distribution (Philips cat no.BG300 LED28 757 PSU PC IN S1) fixing on existing 5 mtrs Gl Post. The fittings with PVC unsheathed copper leads from terminals to the fitting etc. (DATA -7)

Supply and run of 150mm x 50mm powder coated GI wiring tray with cover and suspension of 12mm full thread on wall/ ceiling with necessary clamping and bolt and nets arrangements with necessary accessories as directed by the departmental officer. (DATA-8)high celing

Supply and run by 150x50mm powder Coated GI wiring tray with cover Cand suspension M 12mm Full thread on wall / ceiling with necessary clamping and bott and nets arrangements with accessories as directed by the departmental officer -(Normal Cailing) (Data-9)

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed compete with 2 module 100w stepped fan regulator (Higher End) with 1 mtr. fan down rod on the existing fan clamp. (SD-573)

Supply and fixing of 300 mm (12") sweep (Light duty) AC Exhaust fan complete without provision of hole in the wall (SD-115)

Supply and fixing of 16"Wall mounting Fan light duty with Pillar Clamp 1½ x ½ MS flat with bolt and nuts for fixing the Fan on wall with necessary connection. (DATA-9)

Supply and fixing of 4 Nos 6A module switch on suitable module surface mounting Box (GI) with module cover plate (pastic) on wall with connection. Higher End. (DATA-10)

Supply and fixing of 6 Nos 6A module switch on suitable module surface mounting Box (GI) with module cover plate (pastic) on wall with connection Higher End.

Supply and fixing of 8 Nos 6A module switch on suitable module surface mounting Box (GI) with module cover plate (pastic) on wall with connection. Higher End. (DATA-12) 3

Supply and fixing of 12 Nos 6A module switch on suitable module surface mounting Box (GI) with module cover plate (pastic) on wall with connection. Higher End. (DATA-13)

Supply and fixing of 2 pole sheet steel enclosure with 32A Double pole MCB on wall with necessary connection complete etc.

Supply and fixing of 4 pole sheet steel enclosure with 32A Double pole MCB on wall with necessary necessary connection complete etc.

Supply and fixing of 8 way Single pole and neutral MCB sheet steel enclosure distribution board with Double Door (Metal) with 32A DP MCB as incoming and 6Nos 6-32A SPMCB as Outgoing on suitable angle iron frame on wall wall with earth connection only. (Higher End)

Supply and fixing of Three phase 4way Vertical type MCB distribution board with Metal Door cover with 63A 4 pole MCB as incoming and 12 Nos-6A-32A SPMCB as Outgoing on suitable angle iron frame on wall wall with earth connection only. (Higher End)

Supply and fixing of 6way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double Door (Metal door) with 1 no.160A 4P MCCB Switch as incoming and 4 Nos63A 3P MCB,6 Nos 6A-32A SPMCB as Outgoing with suitable cable end box onsuitable angle iron frame on wall wall with earth connection only. (Higher End)

Supply and fixing of 8way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double Door (Metal door) with 1 no.160A 4P MCCB Switch as incoming and 6 Nos63A 3P MCB,6 Nos 6A-32A SPMCB as Outgoing with suitable cable end box onsuitable angle iron frame on wall wall with earth connection only. (Higher End)

250A Panel Board:- Design, Supply, erection, testing and commissioning of 250A floor mounted cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB's units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4 Nos. of 1" X 4" tinned copper bus bar for 3 phases and neutral (25mm x 6mm) and 2Nos. of ear thing bus of size 1" X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator(Epoxy insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4"X 2"X 14"-1Set Incoming 1)Supply and fixing of 1 No. 250A 4 pole 433V LT MCCB confirming to IS with Thermal Magnetic Release making capacity for easy maintenance as per CEIG, IE rules in force with inter connection and terminations as required in specification Outgoing1) S & F of 200A 3Pole MCCB-1Nos2) S & F of 160A 3PoleMCCB-3 Nos3) S & F of 100A 3PoleMCCB-1 No4) S & F of 63A 3PoleMCCB-3 NosInter connecting the all LT MCCB's to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB's to earth bus using suitable tinned copper flats by 2 runs of 1" X 1/8" Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with, 1 sets of supply and fixing Electronic Multifunction Meter class 0.25 flush mounting L&T or equivalent make.Supply and fixing of danger board with Siemens grey powder coating with super Scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T,C&S, SIEMENS,ABB)

250A Panel Board:- Design, Supply, erection, testing and commissioning of 250A floor mounted cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB's units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel (1.6mm) with 4 Nos. of 1" X 4" tinned copper bus bar for 3 phases and neutral (25mm x 6mm) and 2Nos. of ear thing bus of size 1" X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar Insulator(Epoxy insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4"X 2"X 14"-1Set Incoming1)Supply and fixing of 1 No. 250A 4 pole 433V LT MCCB confirming to IS with Thermal Magnetic Release making capacity for easy maintenance as per CEIG, IE rules in force with inter connection and terminations as required in specification Outgoing1) S & F of 160A 3Pole MCCB-4Nos2) S & F of 100A 3PoleMCCB-2 Nos3) S & F of 63A 3PoleMCCB-1 No Inter connecting the all LT MCCB's to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB's to earth bus using suitable tinned copper flats by 2 runs of 1" X 1/8" Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with, 1 sets of supply and fixing Electronic Multifunction Meter class 0.25 flush mounting L&T or equivalent make.Supply and fixing of danger board with Siemens grey powder coating with super Scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T,C&S, SIEMENS, ABB)

Outdoor panel Kioshk type:-Design, Supply,erection, testing and commissioning of 160A pedestal type Floor mounted cubical panel outdoor board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB's units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4 Nos. of 1" X 1/4 "tinned copper bus bar for 3 phases and neutral (25mm x 6mm) and 2Nos. of ear thing bus of size 1" X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator(Epoxy Insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4"X 2"X 4"-15et Incoming1) Supply and fixing of 1 No. 160A 4 pole 433V LT MCCB confirming to IS with Thermal Magnetic Release making capacity of 25 KA breaking for easy maintenance as per CEIG, IE rules in force with inter connection and terminations as required in specification. Outgoing1) S & F of 125A 3Pole MCCB-1No2) S & F of 100A 3Pole MCCB-1No3) S & F of 63A 3Pole MCCB-4No Inter connecting the all LT MCCB's to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB's to earth bus using suitable tinned copper flats by 2 runs of 1" X 1/8" Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with, 1set of supply and fixing Electronic Multifunction Meter class 0.25 flush mounting L&T or equivalent make Supply and fixing of danger board with Scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T,C&S SIEMENS ABB)

Supply and run of 2 of 1.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in existing PVC rigid pipe/Gl cable tray Open on wall and ceiling with continuous 1.5 Sq mm green colour earth wire connection complete etc.

Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in existing PVC rigid pipe/GI cable tray Open on wall and ceiling with continuous 2.5 Sq mm green colour earth wire connection complete etc..

Supply and run of 2 of 4 sqmm (36/0.3) PVC Insulated SC unsheathed Cu.Conductor of 1100V Grade in existing PVC rigid pipe/Gl cable tray Open on wall and ceiling with continuous 4 Sq mm green colour earth wire connection complete etc...

Supply and run of 4 of 6 sqmm (36/0.3) PVC Insulated SC unsheathed Cu. Conductor of 1100V Grade in existing PVC rigid pipe/Gl cable tray Open on wall and ceiling with continuous 6 Sq mm green colour earth wire connection complete etc..

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG Alu cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.

Supply and laying of 3.5C core x 25 sq.mm PVC armoured LTUG Alu cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.

Supply and laying of 3.5 core x 35 sq.mm PVC armoured LTUG Alu.cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.

Supply and laying of 3 1/2 x 95 sq.mm PVC armoured LTUG Alu.cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good

Supply and laying of 3 1/2 x 150 sq.mm PVC armoured LTUG Alu.cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.

Supply and laying of 3 1/2 x 185 sq.mm PVC armoured LTUG Alu.cable in Suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 Mtr and refilling the earth to make good.

Supply and frxing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

Supply and frxing of brass cable gland for 4 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and frxing of brass cable gland for 4 x 35 or 31/2 X35 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and frxing of brass cable gland for 31/2 X 95 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and frxing of brass cable gland for 31/2 X 150 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and frxing of brass cable gland for 31/2 X 185sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4x 25 sq.mm.PVC LTUG armoured Alu. cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 4x 35 sq.mm.PVC LTUG armoured Alu. cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 31/2 x 95 sq.mm.PVC LTUG armoured Alu, cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 31/2 x 150 sq.mm.PVC LTUG armoured Alu. cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete

Supply and providing cable end termination of 31/2 x 185 sq.mm.PVC LTUG armoured Alu. cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete

Supply and fixing of LT CT Service Metering box made up of 16SWG CRCA Sheet steel as per TNEB/IER specification with earth connection on suitable masonry plinth/Pedestal Angle iron frame work complete with suitable copper Flat and LT CT coil, interconnection of 2.5 sqmm PVC unsheathed SC copper conductor of 1100V grade 4colours Red, Yellow, Blue and Black 5mtrs each with termination kits and 3Nos Kappa make 250/5A CT Coil with 3 nos LED Lamp for M.R.T use, complete as required for TNEB LT side metering as instructed by the site officers complete with painting of suitable color.(Note- Energy Meter supplied by TNEB)LT/CT Metering box supply by TNEB Approved Fabricator)

Supply and fixing of 250A TPN Switch disconnector fuse units in sheet steel enclosure with HRC Fuses double break on suitable angle iron frame work with MS Cable entry boxes with earth connection only.

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC Insulated copper wire from EB meter to fuse unit. with 1 no 40 Amp 30MA Double Pole RCD/RCCB higher end With suitable necessary connection @ Uloga Thirumeniyal Padukappu Malyum-separate existing single phase service with INO 40Amp 30 MA Double Pole RCD RCCB (Higher End) with suitable necessary connection

Design, supply, erection, testing and handing over of High Mast Structure Crompton/Havells/Bajaj/make or equivalent with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. )complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast250W LED flood light luminaries (Higher End a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2.5 metre depth with necessary galvanized 8 Nos foundation bolts nuts and washers and temp plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site 1 lob b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch- 1 Setc) Feeder pillar box comprising 0.90m x 0.45m x 1,20m floor Al frame with 63 A TPN main switch 1 no 63 A fuse unit 3 nos, 63 A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1 Set.d) Neon aviation obstruction light(Crompton/equivalent make - 1 No.e) 2 Nos of special Gl earth electrodes with copper plate 300 x300 x 3mm and copper flat (1"x1/4") interconnection as per ISS complete with earth connection -1 set.f) Hot dip galvanized lightning arrestor 1 No.g) Tango LED Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with LED Light fitting like PHILIPS make model No. with LED Bulb with drives, Alglas coated reflectors, with cable connection etc and with assembly Model (philips cat no. BVP483 LED29 CW NB A1 PSU GR SPD)complete complete as per standard specification. -8 nosThe above Highmast complete all associated works erection testing and commissioning in neat alignment with proper plate earthing complete etc.

Renewal of Supply and fixing of 65 mm (21/2") Gl pipe (Class 'B') of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of masonary pedestal with suitable angle iron frame work and Supply and fixing of 150W LED Flood light fitting ( Havells/Philips/Equ Make) with 0.5 Mtr 40mm x40mm x6mm angle iron frame for fixing the 150w LED flood fitting complete set with SMC sintex box 4way heavy duty connector 3 core 1.5 sqmm.copper wire from terminal to fittings 6A SPMCB (Legrand make) with 32mm dia PVC pipe up and down cable entry with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour

Supply and fixing of 65 mm (21/2") GI pipe (Class 'B')of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of masonary pedestal with suitable angle iron frame work and Supply and fixing of 2 Nos 48W LED Street light fitting (Havells/Philips/Equ Make) with 1 Mtr 40mm dia twin cowl type bracket for fixing the 2 nos 48w LED fitting complete set with SMC sintex box 4way heavy duty connector, 3 core 1.5 sqmm copper wire from terminal to fittings 6A SPMCB (Legrand make) with 32mm dia pvc pipe up and down cable entry with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour.

Earthing as per thelSl specification with an earth electrode of 2.10 metre Class 'B' Gl pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/floor/ground for earth connection.

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood.plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work Vimanam /Gopuram upto 15'0' height.

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work at.l providing with net lawn/PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work Vimanam/Gopuram upto 25-0' height.

Sub Total

GST @ 18%