Hindu Religious And Charitable Endowments Tender

Random Rubble masonry work in Combination Motor 1:1:5 (One of cement and five of M-sand) Using selected stone and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard specifications. The lime used should be sourced from pollachi which is highly iron fortified and suitable for structural and masonry works

Providing and laying in position, Standardised Concrete mix M-20 Grade in accordance with IS 456, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete 325kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommened proportion as per IS :9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0cu.m) 7730kg of 20mm machine crushed stone jelly and with about (3.3cu.m) 5156 kg of 10-12mm machine crushed stone jelly and wiht about (4.79cu.m) 7670 kg of M.Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fanc clams in the RCC floor/ roof slabs wherever necessary without claiming extra, etc, complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards . (No separate payment will be made by the Department for hte excess usage of materials).

Centering for sides and soffits of RCC slabs of plain surface like lintels, beams, etc., including strutting 3m hight using MS sheets of size 90cmx60cm and BG 10 stiffened with MS angles of size 25x25x3mm laid over silver oak(C.W) joists of size 10x6.5cm (spaced at about 90cm c/c) and supported by casurina prop. 10cm to 13cm dia (spaced of 75cm c/c) complying with standard specification and directed by the Dept, Officers

Spplying, fabricating and placing in position of MS or RTS bars for all RCC works including cutting bending and placing in position and also the cost of binding wire also etc., complete (SS NO 134)

Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures upto 10 feet length etc., complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers etc, Complete with standard specifications

For Mahamandapam

For Mahamandapam

For Mahamandapam

Labour chargs for Dressing & Fixing the Cut Stone for 3 line dressed on all face set in Cement Mortar 1:3 including handling charges cost of tools and fixing in position etc., complete with standard specifications

Chithravanam

Upapeeda upana vari

Upapeeda kanda vari

Upapeeda pattikai vari

adhistanam jegathi vari

kal vari

Nilaikal (Nagabantham Kodikarukku Poo)

Thoon

Pothioyal (Thani)

Uthiram vari (outer)

Uthiram vari (inbetween pillars)

Kapothga vari

Vyala vari

Pavukkal mahamandapam side pay

" " center pay

" " antharalam

Flooring stone mahamandapam

" " antharalam

Steps

Surul padi

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc., complete with standard specifications.

Finishing the top of roof with one course of machine pressed tiles 20cmx20cmx20mm of approved quality laid in cm 1:3, 12mm thick mixed with water proofing compound 2% by weight of cement used etc., comple with standard specifications

Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc., complete with std. Specifications.

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for working, inspection etc., complete hire charges only for erection, maintenance and removing the same on completion of the work 1 sq.ft

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)