Hindu Religious And Charitable Endowments Tender

Three Line Dressing

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.( for Ground Floor)

Dismantling, Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs clearing away and carefully stacking materials useful for re-use for any thickness of walls

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) (SD 22)

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting. (Data A)

Supply and fixing of 450mm wall mounting fan Heavy duty with necessary MS clamps and electrical connections complete. (Data-B)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb (SD-84)

Supply and fixing of 80W LED focus fitting complete on suitable MS angle with suitable MS clamp. (Data C)

Supply and run of MS angle with necessary clamping arrangements on the pillars with necessary accessories and painting as directed by the departmental officer. (Data D)

Supply and fixing of MS clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data E)

Supply and fixing of PVC Module junction Box on wall or on angle with required accessories. (Data F)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sqm copper wire with painting of suitable colour (SD 54)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour(for set plugs & power plugs) (SD-336)

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for set plug) (SD 142)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box (SD 139)

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD-445)

Supply and fixing of 2 x 30W LED street light fitting complete with 1m 65mm dia GI pipe, 32 mm dia GI pipe (Class'B') with 2 No. 32 mm GI bend complete on the wall with PVC junction box with bakelite connector, with PVC unsheathed copper leads MS clarnps and aluminium painting (Data G)

Supply and Run of 4 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. (SD-344)

Supply and fixing of single phase timer control for street light with 1 no. 32A DP MCB, 230V operated L&T 32A - 4 Pole Contactor (MCX-3) in suitable enclosure box with necessary accessories, painting and with required inter connections complete. (Data H)

Supply and laying of 2 x 2.5 sq.mm PVC armoured LTUG copper cable in 32mm GI pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data I)

Supply and clamping of 2 x 2.5 sq.mm PVC LTUG armoured Cu. cable on post or on wall with MS Clamps. (Data J)

Supply and laying of 4 x 4 sq.mm PVC armoured LTUG copper cable in 32mm GI pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data K)

Supply and clamping of 4 x 4 sq.mm PVC LTUG armoured Cu. cable on post or on wall with MS Clamps. (Data L)

Supply and fixing of brass cable gland for 2 x 2.5 / 4 x 4 sq.mm. PVC LTUG armoured cable with earth connection (SD 159)

Supply and run of 5 core 2.5 sq.mm flexible copper wire with necessary accessories with electrical connections complete. (Data M)

Supply and fixing of DP MCB in sheet steel enclosure box with 1 no. 32A DP MCB with electrical connections complete. (DataN)

Supply and fixing of 120W focus light with MS clamps and MS angle and electrical connections complete. (Data O)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End(SD-522)

Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-581)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD-569)

Supply and fixing of 2 KVA 24V online sine wave UPS (Microtek / eql) with 2 no. of fully charged 12V, 150Ah tubular battery (Exide / eql) with necessary accessories, electrical connections complete as directed by the departmental officers. (at Madapalli) (SR)

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (SD-646)

Fabrication, Errection, Testing and commissioning of pedestal mounted pillar box made out of 16SWG CRCA MS Sheet of size 48”x36”x18” out door Type with double compartment and with angle iron stiffener with front open doors for each compartment with lock and key facilities with sealing (TNEB Type) arrangement with dust and Vermin proof and space for fixing TNEB Electronic type energy meter suitable for 3 phase 415 V 4wire 50 HZ AC supply having 400A Capacity Copper Bus bar on suitable bus insulators and provision for mounting 3 Nos C.T.S of 400/5A for incoming to the energy meter and supply and fixing of 3 Nos.400A fuse Units and neutral link on 6mm Thick Hylum sheet and provision for cable entry for both incoming and outgoing cables at the bottom and painting the board with Two coats of anti-corrosive paint of approved colour with earth connection and comprising the following. 1. Digital multi function meter. 2. LED Indicator light arrangement with suitable push switch and fuse units 3. 1 No earth bus of 0.75 mts of 1”x1/8” Copper flat at one side 4. Base channel fixed at the bottom of pillar box 5. View glasses fixed with at both compartments 6. Caution / Danger board 7. For meter wiring should be made with identification ferules 8. The whole arrangements should be errected on suitable masonary pedestal (Data-P)

Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains. (SD 368)

Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains. (SD 369)

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour.(SD 346)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 212)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD-371)

GST18%