Hindu Religious And Charitable Endowments Tender

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling M.sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Random Rubble masonry work Lime Mortar 1:2 mix using selected stones and rough stones in foundation and basement including dewatering wherever necessary proper setting,curing,etc.,

Supply of cutstone for carrying ot garbagraham, arthamandapam, mahamandapam, thirumadhil wall and other temple structure

Cut Stone blocks of Length upto 5'0" (Five Feet) - Ubabeetam (Pathmajagathi, Athistananam, Kandam, Kabothagam)

Cut Stone blocks of Length Above 5'0" and Upto 10'0"

Cut Stone blocks of Length Above 5'0" and Upto 10'0"

Labour Charges for New cut stone structures with dressing excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal,scaffolding charges,handling charges, hoisting and fixing in position etc, complete.

Ubabeetam (Pathmajagathi, Athistananam, Kandam, Kabothagam)

For Inner Couse

Uthiram (beam)

Pothiyal

Pillars

Kabothagam

Pavukkal

Labour charges for refixing the existing cutstone structure including numbering all labour charges, hire for all tools and plants for employed, scaffolding charges, handling charges, hoisting and stacking them in places shown by the departmental officers etc complete as per standard specifications

Labour charges for Cutstone masonrywork in Lime mortar 1:2 excluding cost and conveyance of Cut stone but including all labour charges, Scaffolding etc., complete with standard specification

Providing flush pointing the cutstone joints with Lime mortar 1:1.5,20 mm neatly including cost of special tooles such as brush and watering, curing etc complete as per Standard specifications.

Brick work in lime mortar 1:2 using Country bricks of size 8 3/4 "4 1/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc, complete as per standard specifications

Plastering with lime mortar 1:1.5,12 mm thick including cost and Conveyance of all materials and all labour charges curing etc, complete as per standard specifications

Painting two coats with approved water based exterior/interior emulsion over the cement plastered surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc complete as per standard specifications.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in CM 1:3 ,12mm thick mixed with water proofing compound 1% by weight of cement used etc., complete

Flooring with Cutstone slab of size 600mmx600mm and other sizes suitable for site requirement not less than 100 mm thick with machine cutedges and top surface dressed as directed by the departmental officers including cost and conveyance of matrials to site and labour charges for paving and pointing with lime mortar 1:1.5 etc complete.

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specification - Door Size - 0.91x1.83

Best Varnish two coats for wood works etc., complete complying with standard specifications

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing newsudhai vigrahams in Vimanam /Gopuram with galvanized iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in lime mortar 1:1.5 finishing the same with lime mortar 1:1.5 bringing to the correct shape (Lakshna)in conformist with silpa sastra inclusive of special cost and conveyance of all materials, such as cement broken bricks, and copper rods Binding wire all labour for working in heights, curing lifting of materials etc., complete including cement painting two coats over a primary coat ( one vigrahams is accountable with one head, 4 hands with weapons,ornamental costumes etc as per prathimakshans vigrahams heightis measurable from the crown top to the bottom of foot only if peetam is provided the rate with peetam may be adopted as detailed here under)

Above 2’6” and upto 3’6”

Above 3’6” and upto 4’6”

Wiring with 2 of 1.5 sq.mm ( 22/0.3 ) PVC insulated unsheathed SC copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TWswitch box and 5A FTswitch in flush with wall with 3mm thick hylam sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator )

Wiring with 2 of 1.5 sq.mm ( 22/0.3 ) PVC insulated unsheathed SC copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVCaccessories with 150x100x113mm TW switch box with 3mm thick hylam sheet cover for 5A 3 pin non inter locking CSplug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for PVC plug point.

Supplying and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25 mm dia GI pipe(class B)suitably bend at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of single box type 4’40W flu.Fitting complete with copperchoke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube.

Supplying and fixing of 4’40 w twin street light flu fittings complete with copper chokes and condencer with 32mm dia GI pipes(class B)with 1 no. 32mm GI bend complete on the existing post/wall with 16A aerial fuseunit on MSplate with PVC unsheathed copper leads MSclamps and aluminium painting with flutubes.

Supplying and fixing of fancy glass shade and 11 w CFL for BH point.

Supplying and fixing of 1200 mm ( 48”) AC ceiling fan complete with stepped electronic 300 W regulator and with 1 metre down rod on the existing clamps.

Supplying and fixing of 16 Amps DPIC switch of 500 V with fuse and neutral ( side handle) on suitable TW box with PWD earthing.

Sub total

GST 18%