Hindu Religious And Charitable Endowments Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Hindu Religious And Charitable Endowments - HRICE Tender
Building Construction
Eprocure
Opening Date2 Jan 2025
Closing Date7 Feb 2025
Tender Amount₹ 28,46,64,000
Costs
EMD
₹ 14,33,550Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Valli Thirumana Mandapam,250 Capacity Community Hall 2 Nos, Annadhanakoodam,shopping
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HRCE_515541_1Tender No
2024_HRCE_5609_1Tender Authority
Hindu Religious And Charitable Endowments ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling in foundation, basement, etc with filling crushed stone sand
in layers of not more than 15 cm thick well watered, rammed and consolidated etc.
complete complying with standard specification and as directed by the
departmental
2303
-
-
... More
Cement Concrete 1:3:6 (One cement, Three crushed stone sand and Six hard
broken stone) using 40 mm gauge hard broken jelly for flooring including laying,
consolidating, finishing, rendering the top surface rough to receive the floor,
curing, etc. complete complying with standard specification. (The rate is inclusive
of necessary planking for panelling wherever necessary and as directed by the
departmental officers
52
-
-
... More
Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard
broken stone) using 40 mm gauge hard broken jelly for flooring including laying,
consolidating, finishing, rendering the top surface rough to receive the floor,
curing, etc. complete complying with standard specification. (The rate is inclusive
of necessary planking for panelling wherever necessary and as directed by the
departmental officers
1161
-
-
... More
Supply and filling crushed stone sand gravel mix (1:1) at the rate of 0.62 cu.m of
filling crushed stone sand and 0.66 cu .m of gravel to consolidated 1hide of
150mm designed to attain a CBR value of not less than 20 including cost and
conveyance of crushed stone sandgravel from approved sources to work site and
stacking them to the departmental gauge for premeasurement including labour
charges
1002
-
-
... More
Providing and laying wet mix macadam consisting of clean, crushed aggregates
mechanically interlocked and compacting with earth ramming in layers of 150mm
thick and bonding together with screening binding gravel materials and finished in
accordance with the requirement of the specifications and thickness as per
approved plans or as directed bt the Engineer.
1002
-
-
... More
Supplying and erecting steel centering including necessary supports for plane
surfaces for Reinforced Cement Concrete works such as column footings, column
pedestals, plinth beams, grade beams, staircase steps, etc. which require only
nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened
with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over
silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at
suitable intervals etc. complete in all floors complying with standard specifcation.
(Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For Foundation and Basement
4869
-
-
... More
Supplying and erecting centering for sides and soffits including necessary
supports and strutting upto 3.29 M height for plane surfaces as detailed below in
all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10
BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for
boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm
centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at
not more than 75 cm centre to centre etc. complete complying with the standard
specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed
blocks, landing slab, waist slab, portico slabs and beams, etc.
11436
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades,
top and bottom slab of RCC boxing, etc.
4102
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops,
facia, vertical wall, etc.
407
-
-
... More
Centering for Curved Surface of all RCC item of work
95
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-25 Grade in
accordance with IS:456-2000 using 20mm and down graded hard broken granite
stone jelly for all RCC items of works with minimum cementcontent of 350 kglms
and maximum water cement ratio of 0.50, including admixture (plasticiser /
superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard
setting of concrete, improve workability without impairing strength and durability
with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with
about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with
about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of
reinforcement grill and fabricating charges, centering and shuttering and also
including laying, vibrating with mechanical vibrators, finishing, curing, etc. and
providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary
without claiming extra, etc., complete complying with standard specification and as
directed by the departmental officers. The coarse and fine aggregates to be used
should comply with the requirements of IS Standards. (No separate payment will
be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation and Basement
538
-
-
... More
Ground floor
363
-
-
... More
First floor
234
-
-
... More
Second floor
45.84
-
-
... More
Third floor
76
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-30 Grade in
accordance with IS:456-2000 using 20mm and down graded hard broken granite
stone jelly for all RCC items of works with minimum cementcontent of 350 kglms
and maximum water cement ratio of 0.50, including admixture (plasticiser /
superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard
setting of concrete, improve workability without impairing strength and durability
with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with
about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with
about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of
reinforcement grill and fabricating charges, centering and shuttering and also
including laying, vibrating with mechanical vibrators, finishing, curing, etc. and
providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary
without claiming extra, etc., complete complying with standard specification and as
directed by the departmental officers. The coarse and fine aggregates to be used
should comply with the requirements of IS Standards. (No separate payment will
be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation and Basement
774
-
-
... More
Ground floor
771
-
-
... More
First floor
122
-
-
... More
Second floor
150
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-35 Grade in
accordance with IS:456-2000 using 20mm and down graded hard broken granite
stone jelly for all RCC items of works with minimum cementcontent of 425 kg/m3
and maximum water cement ratio of 0.45, including admixture (plasticiser /
superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard
setting of concrete, improve workability without impairing strength and durability
with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with
about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with
about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of
reinforcement grill and fabricating charges, centering and shuttering and also
including laying, vibrating with mechanical vibrators, finishing, curing, etc. and
providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary
without claiming extra, etc., complete complying with standard specification and as
directed by the departmental officers. The coarse and fine aggregates to be used
should comply with the requirements of IS Standards. (No separate payment will
be made by the Department for the excess usage of materials).
-
-
-
... More
First floor
740
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel
grills for all RCC works as per design given including cost of steel and G.I.
binding wire in all floors etc. complete complying with standard specification.
(Contractor has to make his own arrangements for the supply of steel and binding
wire)
5008
-
-
... More
Post Tensioning Work:
Design and execution of post tensioning work, including decoiling, the strands,
cutting to the required lengths, supplying, laying of HT strands sheathing (GI
corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands,
profiling, fixing liveend anchorages, including supply of stressing anchorages,
suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages,
including flowering the strands, fixing tendon support bars, supervising the fixing of
antibursting reinforcement, stressing the cables, end trimming, grouting the
cables, with cement slurry, mixed with admixtures with required tools, plants, and
machineries, and consumables etc. (Shuttering, concreting & reinforcement steel
shall be paid under respective items) at all heights including all leads, lifts,
coordination, with the post- tensioning agency, preparation of drawings, obtaining
approval from the Employer / Architect etc. Rate to include providing water, power,
cement and admixture for grouting, packing of sheathing and anchorages
blockings, filling of recess pockets after stressing using grouts (cement slurry
mixed with approved admixtures) including providing access to post tensioning at
all heights including all leads, lifts etc., all complete and as approved and as
directed by the Employer Architect but excluding shuttering, concreting &
reinforcement steel which shall be payable under respective items separately.
-
-
-
... More
For PT Beam & Slab
4
-
-
... More
Brick work in Cement Mortar 1:5 (One Cement and Five M-sand) using best
quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and
basement including curing, etc., complete complying with standard specifiction.
-
-
-
... More
Foundation and Basement
263
-
-
... More
Brick work in Cement Mortar 1:6 (One Cement and six M-sand) using best
quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and
basement including curing, etc., complete complying with standard specifiction.
-
-
-
... More
In Ground floor
599
-
-
... More
In First floor
628
-
-
... More
In Second floor
180
-
-
... More
In Fourth floor
6
-
-
... More
Brick partition walls of 11.50cm thickness using best quality II class Ground
moulded chamber burnt bricks of size 8-3/4" x 4-3/8" x 2-3/4" in Cement Mortar 1:3
(One Cement and Three crushed stone Sand) using hoop iron reinforcement if
found necessary including curing etc. complete and as directed by the
departmental officers. (Hoop iron reinforcement will be measured and paid for
separately)
-
-
-
... More
Ground floor
449
-
-
... More
First floor
424
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand),
12mm thick in all floors including curing etc. complete complying with standard
specification and as directed by the departmental officers.
14985
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of
work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab,
landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering
Sand) 10mm thick including hacking the surfaces, providing cement mortar
nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in
all floors complying with standard specification and as directed by the
departmental officers
13640
-
-
... More
Supplying and fixing of window grill using outer alround frame with 25x25x6mm L
angle and vertical, horizontal 12mm square rod including one coat of red oxide
primer, including all cost of materials and conveyance, labour charges, cutting and
welding etc., complete complying with standard specification and as directed by
the departmental officers
18322
-
-
... More
Ornamental Brickwork in Lime mortar 1:2 ( one lime two M sand) using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi ,all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including
cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram,
-
-
-
... More
Upto 25'0" height
81
-
-
... More
Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime mortar 1:1.5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortor1:1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area.
-
-
-
... More
Upto 25'0" height
1032
-
-
... More
Painting with multicolour (Panchavarnam) good water based exterior Emultion paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of
material, cost of brushes etc, complete-which including all extra for foldings100sft, superficial area.
-
-
-
... More
Upto 25'0" height
1045
-
-
... More
Supplying and laying of Rubber moulded Hydraulic pressed Paver blocks of 83 mm thickness using rubber mould, approved make with grey colour including cost of conveyance of interlocking blocks and filling sand and spreading of sand to a thickness of 15 cm for cussion below the interlocking blocks and consolidating, vibrating labour charges for laying to proper level slope etc. as directed by the dept. officers (Design and colour of interlocking blocks should be got approved by EE before using)
2448
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including wall putty, wherever required
109848
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever require
6736
-
-
... More
Providing two coats putty for the walls including cost of putty, labour charges , scaffolding etc., complete complying with relevant standard specification and as directed by the departmental officer.
21138
-
-
... More
Painting the ceiling with two coats of approved Pale Milk White Plastic Emulsion paint over one coat of primer over Cement Plastered ceiling surface including cost of brushes, emulsion paints curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality of paint should be got approved by the Executive Engineer before use).
13380
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
545
-
-
... More
Best Indian Teak Wood wrought and putup for frames of doors, windows, ventilators, cupboards and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc., including labour charges for fixing hold fast complying with revevent standard specification etc., in all respects.
-
-
-
... More
Teak wood door frames 2-4 m
2.1
-
-
... More
Supplying and fixing in position of Best Indian Teakwood Panelled door shutters Single leaf in position using 125 mm x 37.5 mm rails (Top, middle, bottom and lock rail) ,125 mm x 37.5 mm styles and 18.75 mm thick planks for panels including cost and labour for fixing excluding cost of varnishing the door but including cost and labour for fixing the Brass furniture fittings with required screws viz., 1 No. of 6" Door Handle, 3 Nos. of 5" Butt hinges, 2 Nos. of 6"x1/2" Tower bolt, 1 No. of 10" x 5/8" Aldrops, 1 No. of Nylon Rubber bush of size 2", 1 No. of door stopper with rubber bush, ncluding cost and fixing of Mortice Lock etc. all, complete as per relevant standard specification and as directed by the departmental officers.
53
-
-
... More
Supplying and fixing Solid core flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
378
-
-
... More
Providing Melamine polish for wooden door including cost of materials, labour charges and scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers.
84
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
293
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
81
-
-
... More
FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers
198
-
-
... More
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
20
-
-
... More
Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.
2986
-
-
... More
Supplying and fixing in position of high density fibre partition board of 12mm thick with door and other necessary fittings to have an neat appearance as drawings, model and as directed by the department officers. The cost includes, cost of material, labour, scaffolding wherever necessary, transportation, conveyance, etc., complying to standard specification
40
-
-
... More
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
13
-
-
... More
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area)
7
-
-
... More
Supplying and laying of Joint free Rectified Glazed Ceramic Flooring Tiles 305 x 305 x 8mm (Anti Skid) thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building)
768
-
-
... More
Supplying and fixing in position of Double Charged Vitrified Floor tiles (800x800mm) of any size of approved special quality of 10 mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building)
4243
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
510
-
-
... More
Supply and fixing of polished jet Black granite wall cladding slab of 10mm to 12 mm thick of best approved quality laid in C.M. 1:2(one of cement and two of sand) 12mm thick over the wall in all the floors including cutting the granite slab to the required size wherever necessary fixing in position finishing edges neatly including the cost of granite slab nosing , polishing laying etc., complete in all respect as directed by the departmental officer.
93
-
-
... More
Supplying and fixing in position of Dadooing Wall Tiles of size 300mm x 450mm x 8mm laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing/ dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note: (The colour make and quality shall be approved from the E.E before use) Note: (only one particulars size of ceramic wall tiles to be used for one building)
1761
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
-
-
-
... More
Ground floor
34
-
-
... More
First floor
221
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
3240
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete complying with relevant standard specification and as directed by the departmental officers
518
-
-
... More
Supplying and Fixing MS Ladder width 45cm using 50x50x6mm MS Angle.
20
-
-
... More
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.
1320
-
-
... More
Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc.
200
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
200
-
-
... More
Supplying and fixing in position best approved of BIS quality 110 mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
... More
one floor
62
-
-
... More
second floor
658
-
-
... More
Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including fixing UPVC specials using UPVC adhesives (including cost of specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
... More
50 mm Dia UPVC Pipe
175
-
-
... More
40mm Dia UPVC Pipe
200
-
-
... More
32 mm Dia UPVC Pipe
20
-
-
... More
25 mm Dia UPVC Pipe
402
-
-
... More
20 mm Upvc Pipe
646
-
-
... More
Supplying and fixing of GM Gate valve heavy duty labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use).
-
-
-
... More
50 mm Dia
28
-
-
... More
40 mm Dia
2
-
-
... More
63 mm Dia
6
-
-
... More
25 mm Dia
4
-
-
... More
Supplying and fixing in position 15mm dia brass CP screw down tap(heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works).
-
-
-
... More
CP Down tap
102
-
-
... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
91
-
-
... More
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
91
-
-
... More
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
95
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
10
-
-
... More
Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 10 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
62
-
-
... More
Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
25
-
-
... More
Supplying and fixing best approved best quality CP Health Facet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
52
-
-
... More
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
22
-
-
... More
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
88
-
-
... More
Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
8
-
-
... More
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
169
-
-
... More
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.
47
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
... More
160 mm dia
850
-
-
... More
110 mm dia
1047
-
-
... More
75 mm dia
768
-
-
... More
Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, crushed stone sandfilling, etc., shall be measured and paid separately under respective items). Below ground level
-
-
-
... More
65 mm
75
-
-
... More
50mm
260
-
-
... More
Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
-
-
-
... More
IC chamber for 110mm (900x900x600)mm
34
-
-
... More
IC chamber for 110mm (600x600x600)mm
147
-
-
... More
Supplying and fixing in position SFRC manhole covers with SFRC frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
2
-
-
... More
Special Blue Slotted Pipes for Bore Wells 160mm dia
30
-
-
... More
End cap for Bore Wells 160mm dia
1
-
-
... More
HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) 50mm dia
200
-
-
... More
Nylon Rope for Bore-well
200
-
-
... More
Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).
-
-
-
... More
160 mm dia stoneware pipe
1342
-
-
... More
110 mm dia stoneware pipe
257
-
-
... More
Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
100
-
-
... More
Supply and clarnping of 3 1/2 x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
30
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection
8
-
-
... More
Supply and providing cable end termination of 3-1/2 x 240sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
8
-
-
... More
Supply and Laying of2Runs of 3 1/2 x 150sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
210
-
-
... More
Supply and clarnping of 2Runs3 1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
150
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection
60
-
-
... More
Supply and providing cable end termination of 3-1/2 x 150sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
60
-
-
... More
Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
130
-
-
... More
Supply and clarnping of 3 1/2 x 70sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
120
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection
16
-
-
... More
Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
16
-
-
... More
Supply and Laying of 3 1/2 x 50sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
95
-
-
... More
Supply and clarnping of 3 1/2 x 50sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
45
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 50sq.mm. PVC armoured LTUG cable with earth connection
8
-
-
... More
Supply and providing cable end termination of 3-1/2 x50sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
8
-
-
... More
Supply and Laying of 3 1/2 x 25sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
330
-
-
... More
Supply and clarnping of 3 1/2 x 25sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
100
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 25sq.mm. PVC armoured LTUG cable with earth connection
16
-
-
... More
Supply and providing cable end termination of 3-1/2 x25sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
16
-
-
... More
Supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good
50
-
-
... More
Supply and clarnping of 2 x1 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
10
-
-
... More
Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection
2
-
-
... More
Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good
1700
-
-
... More
Supply and clarnping of 4x1 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
160
-
-
... More
Supply and fixing of brass cable gland for 4 x 16sq.mm. LTUG armoured cable with earth connection
100
-
-
... More
Supply and providing cable end termination of 4x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
100
-
-
... More
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
10
-
-
... More
Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
2600
-
-
... More
Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathedc FRLScopper wire and making good of the concealed portion with suitable colour.
1000
-
-
... More
Supply and Run of 4 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion with suitable colour.
170
-
-
... More
Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour
50
-
-
... More
Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper FRLS conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 10 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.
705
-
-
... More
Supply ,Erection ,Testing and commissioning of Three compartment LTCT meter box made up of 16 SWG CRCA sheet steel ( Length 1200mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor / wall mounting support with supply and fixing of the following interior mounting arrangements with busbar chamber, meter chamber and Terminal box chamber confirming to IE rules.
i.The busbar chamber will consist of 4 nos. 2” x 1/4” tinned copper flat for phase and neutral busbar on epoxy mounted bus insulated at proper and sufficient spacing between the bus bar as per IE Rules.
ii. 3 nos. 200/5A CT coil mounted in Three phase busbar.
iii. Interconnection between CT coil to 4 way terminal box and 4 way terminal box to Meter box by 4 sq.mm PVC cu.wire.
The LTCT meter box should be powder coat paint of approval colour , approved by site officer.
3
-
-
... More
Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
3
-
-
... More
Supply, Erection, Testing, Commissioning and Handing over of 1 No 125 KVA Diesel Generator set With Acoustic enclosure conforming to CP CB Iv + Norms and BIS specification of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below with AMF panel.
1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 300 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000.
The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ Greaves/Equivalent)
1. Dry type Air cleaner 2. Expansion bellow
3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro
8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate
13. Residential Mufler
14. Fly wheel with starter ring.
ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator.
SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device
-
-
-
... More
1. Low lubricating oil pressure
2. High Water temperature 3. Vee-belt failure and over speed
4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load
2. ALTERNATOR : Alternator capacity of 125 KVA/ 100 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.) 3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process
of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt
distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank
The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be
-
-
-
... More
unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. 4. FUEL TANK : 200 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance.
First Filling Of 200 Liters Diesel for Test Running
5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges.
3
-
-
... More
Earthing as per ISI specification with an earth elctrode of 2.1 m class "B" GI Pipe of dia not less than 40 mm with copper earth plate of size 125 mm x 50 mm x 6 mm with necessary funneling arrangements with necesssary masonry work and with 38 mm RCC cover slab for the brick masonry with appropriate specification / standards and as directed by dept Officers.
50
-
-
... More
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
110
-
-
... More
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
350
-
-
... More
Supply , Erection, Testing and commissioning of 415V/50 HZ 400A Cubical panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete.
400A 4P MCCB -1no.
125A 4P MCCB - 4 nos.
63A 4P MCCB - 2 nos.
1
-
-
... More
Supply , Erection, Testing and commissioning of 415V/50 HZ 400A Cubical panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete.
400A 4P MCCB -1no.
250A 4P MCCB - 1 nos.
125A 4P MCCB - 4 nos.
63A 4P MCCB - 5 nos.
1
-
-
... More
Supply , Erection, Testing and commissioning of 415V/50 HZ 400A Cubical panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete.
400A 4P MCCB -1no.
125A 4P MCCB - 4 nos.
63A 4P MCCB - 7 nos.
1
-
-
... More
Supply , Erection Testing and commissioning of 415V/50 HZ 125A Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/4 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Multifunction meter with suitable CT coil , with Two set of LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete.
125A 4P MCCB -1 no.
63A 4P MCCB -7 nos.
2
-
-
... More
Supply Erection Testing and Commissioning of 415V/50HZ Cubicle panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16SWG thick CRCA sheet with 1" x 1/4" tinned copper flats for 3phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2Runs of 1" x 1/8" copper flat on rear side of the panel board for earth buses with Individual 20Chambers for EB meter and separate chamber for 32A DP MCB with internal connection using 6.0 Sqmm copper wire with individual 32A Rocker Fuse unit for EB Service with Necessary connection and fixing on wall/Floor with by 1 1/2 x 1 1/2 x 1/4 MSchannel and painting with suitable color (EB Metering 20Nos Panel )
1
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
37
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP RCCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
3
-
-
... More
Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
25
-
-
... More
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
23
-
-
... More
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 2nos32A TP.6Nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
9
-
-
... More
Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double door (metal) with 1 no. 125A 4P MCCB switch as incoming and 5nos63A TP.3Nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
1
-
-
... More
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and .24Nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
2
-
-
... More
Supply and ,Erectionof Outdoor Pillar box made up of 16 SWG CRCA sheet steel ( Length 900mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor /wall mounting support to house the Vertical 4 way TPN MC B Distribution board as detailed below
Incoming - 63A 4P MCB -1 no., Outgoing - 32A 3P MCB -2nos., 6A -32A SP MCB -6 nos.
4
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate With contineous eath wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End
1219
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End.)
151
-
-
... More
Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Consealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting and making Good of consumer portion with suitable colour for consealed PVC Stair case Light point Higher End
18
-
-
... More
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End
164
-
-
... More
Supply and fixing of 36W LED 2x2 square type Recessed / Sueface fitting with LED (Higher end) on false Ceiling or ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
208
-
-
... More
Supply and fixing of 18W LED square type 1 x 1 Recessed / Surface fitting with LED (Higher end) on false Ceiling or ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
41
-
-
... More
Supply and fixing of 18W LED down Light type Recessed fitting with LED (Higher end) on false Ceiling or ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.
126
-
-
... More
Supply and fixing of 80W LED flood light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting
15
-
-
... More
Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)
477
-
-
... More
Supply and fixing of 2x 4' 20W LED fitting with 2 nos. LED tubes on conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting
28
-
-
... More
Supply and fixing of 2' 6W LED Mirror Light fitting with LED (Higher end) on wall with necessary accessories with PVC unsheathed copper leads from terminals to the fitting.
13
-
-
... More
Supply and fixing of WT Bulk head fitting with guard and 15W LED bulb
23
-
-
... More
Supply and fixing of 9W LED bulb for BH point
27
-
-
... More
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .
39
-
-
... More
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp
301
-
-
... More
supply and fixing of 1400mm (56") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on the existing fan clamp
40
-
-
... More
Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete without provision of hole in the wall
58
-
-
... More
Supply and fixing of 375mm (15") sweep (Heavy duty) AC exhaust fan complete without provision of hole in the wall
6
-
-
... More
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan
58
-
-
... More
Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan
6
-
-
... More
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
111
-
-
... More
Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
90
-
-
... More
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
33
-
-
... More
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)
30
-
-
... More
Supply and fixing of 32A 4P MCB with sheet steel enclosure on wall with earth connection (Higher end)
14
-
-
... More
Supply and fixing of 32A DP MCB with sheet steel enclosure in flush wall with earth connection (Higher end)
15
-
-
... More
supply and fixing of 6 metre lenght single bracke GI steel tubular pole with base plate 250 x 250 x 6mm OD 76.10mm 3.65mm thick x 6000mm length with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour
50
-
-
... More
supply and fixing of4Meter Length 65mm Dia Class B GI Post with Base plate of SIZE 300MM X300MM X 6MM WITH concrete and construction of masonry pedestal with supply and fixing of Aesthetically designed IP 65 15W LED post top (Higher end) with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink exhibits classic Victorian look with symmetrical light distribution and excellent heat dissipation for long life with connections complete.
22
-
-
... More
Design, Supply, erection, Testing, Commissioning and handing over of 12 metre Mini Mast Structure (Bajaj / Philips / Crompton make or equivalent) with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 12 meters capable of sustaining the maximum wind pressure at the erection site with single flange base mast section with vertically moveable hot dip galvanised lantern carriage and accessories such as electrical junction box brackets for providing 6 Nos of 150W LED flood light luminaries with control gear box complete head frame assembly, pulley drive stainless steel wire rope single / double drum self-lubricating winch arrangements suitable for raising and lowering the luminaries carraige ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and templates including supply and fixing the following accessories in the Mast design and casting of suitable foundation with 1:2:4 mix RCC concreate with 30cm projection above the ground level with 1 mtr width x 1mtr length x 2 mtrs depth with necessary galvanised foundation bolts nuts and washers and dump plates enclosing the bolts nuts for high mast cosidering the safe soil bearing capacity at site-1 Set b) High powered power tool with complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V /50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch-1 SET
c) Feeder pillar box comprising of 0.90m x 0.45m x1.20m floor angle iron frame with 63 A power contactor starter for the 3 Phase motor-1Set
d) Neon aviation obstruction light (Bajaj/equivalent) - 1No.
e)2Nos of special GI earth electode with copper plate 300 x300x3mm and copper flat (1"x1 1/4")inter connection as per ISS complete with earth connections-1SET
f) Hot dip galvanised lighting arrester- 1 No)
2
-
-
... More
Design, engineering, supply, erection, testing, commissioning and handling over of the 10 persons capacity (680 kg) passenger lift, gearless with machine room Speed 1.5m/s with stainless steal panel diabled friendly microproccessor based controller , VVVf drain , Fire rated doors and ARD as per the following technical specification:
TECHNICAL SPECIFICATIONS:-
1) Location: Annathanakoodam
2) No. of lifts / Type of Lift: One / SUKRANTI-Passenger
3) Capacity of lift: 10 persons capacity (680 Kgs) passenger lift
4) Speed: 1.5 Mtr Per Second.
5) Type of Drive: Microprocessor based Variable Voltage Variable frequency (V3F) drive with enhanced ride comfort and levelling functions.
6) Position of Machinary: Directly above the lift well – GEARLESS
7) No of floors: Ground Floor + First Floor (2 landings)
8) Total travel : 8.2Mtrs
9) Leveling accuracy:- High level accuracy with smooth and jerk free stopping.
10) Design of car: Stainless Steel hairline finish combination car body with SS finish ceiling (sleek medium circular LED lights, regular circular fans SS Handrail & PVC flooring.
11) No. of landing entrance : Ground Floor & First Floors (2 landings)
12) No. & position of car entrance : one in front only.
13) Size of lift well: 1940mm x 2240mm (Width x depth)
14) Lift Car inside size: 1300mm x 1350mm x 2200mm (width x depth x height)
15) Lift pit & head room: 1600mm deep, Head room 4800 mm height.
16) Car clear opening: 800mm x 2000mm (width x height) Lintel - 2200mm
17) Landing entrance door: Power operated V3F door, Centre opening sliding door - stainless steel (1.5 mm) - hairline finish.
18) Landing entrance frame: stainless steel - hairline finish.
-
-
-
... More
19) Control:- Microprocessor based Simplex selective collective control with / without attendant.
20) Indication: Dot Matrix LED Direction & Position Indicators in car & landings. Puch button;_orange LED illumination.
21) Emergency Alarm Bell: Battery operated alarm bell to be provided with automatic charging device.
22) Emergency light: Battery operated light to be provided with automatic charging device.
23) Fireman's switch : To be provided at ground floor.
24) Minor builder works: To be provided by lift contractor.
25) Scaffolding: To be provided by lift contractor.
26) Stainless steel Sill angles and facia plates: To be provided by lift contractor.
27) Steel for lift machinary :- To be provided by the lift contractor.
28) Servicing and maintenance: Lift contractor should provide free comprehensive servicing and maintenance during the guarantee period.
29) Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc. Complete with all accessories.
30) Provision if Intercom with phone:- To be provided by the lift contractor
31) Lift license: Preparation of drawings, lift contractor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act.
32) Floor announciator with music: To be provided in the car.
33) Special features:
(a) Battery Operated Emergency Light and Alarm Bell
(b) Call Register Signal And Vf Door Operator
(c) Automatic Rescue Device.
(d) Stainless Steel Button with S.S. Cover.
(e) Dot Matrix Led D & P Indicators in Car & Landings - Orange Colour.
(f) Floor Annunciator with Music.
(g) Firemans Switch
-
-
-
... More
(h) False Ceiling in Car.
(i) Fire Rating of Landing Doors-One Hour
(j) Infra Red Door Screen
(k) Overload warning Indicator
(l) Laminated Mirror At Rear Side.
(m) Scaffolding
(n) Two way Intercom with press & speak in Cop
(o) Provision for EBABX
(p) Free Service for One Year
(q) Pit Ladder
(r) Ss Handrail
(s) Lift License
(t) Minor Builders Work
(u) Provision for Cctv Camera - Ip (Cat6 Flat Travelling Cable)
34) Over speed governor, phase failure and phase reversal relay, alarm bell, T Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression spring etc.
35) Guarantee: Gurantee for the materials and lift firm should offer workmanship of equipments complete for a period of not less than one year.
1
-
-
... More
Design, engineering, supply, erection, testing, commissioning and handling over of the 16 persons capacity (1020 kg) passenger lift, gearless with machine room Speed 1.5m/s with stainless steal panel diabled friendly microproccessor based controller , VVVf drain , Fire rated doors and ARD as per the following technical specification:
TECHNICAL SPECIFICATIONS:-
1) Location: 250 CAPACITY COMMUNITY HALL -2 , Valli Mandapam-3 & Pilgrim Accomodation-2
2) No. of lifts / Type of Lift: One / SUKRANTI-Passenger
3) Capacity of lift: 16 persons capacity 1020 Kgs) passenger lift
4) Speed: 1.75 Mtr Per Second.
5) Type of Drive: Microprocessor based Variable Voltage Variable frequency (V3F) drive with enhanced ride comfort and levelling functions.
6) Position of Machinary: Directly above the lift well – GEARLESS
7) No of floors: Ground Floor + First Floor (2 landings)
8) Total travel : 8.2Mtrs
9) Leveling accuracy:- High level accuracy with smooth and jerk free stopping.
10) Design of car: Stainless Steel hairline finish combination car body with SS finish ceiling (sleek medium circular LED lights, regular circular fans SS Handrail & PVC flooring.
11) No. of landing entrance : Ground Floor & First Floors (2 landings)
12) No. & position of car entrance : one in front only.
13) Size of lift well: 250 CAPACITY COMMUNITY HALL 2 Nos-2000 mm x 2735mm (Width x depth), Valli Mandapam-2 Nos 2435mm x 3000mm (Width x depth) &Valli Mandapam-1 No 2200mm x 3000mm (Width x depth)&Pilgrim Accomodation-2 No 2100mm x 2500mm (Width x depth)
14) Lift Car inside size: 2000mm x 1100mm x 2200mm (width x depth x height)
15) Lift pit & head room: 1600mm deep, Head room 4800 mm height.
16) Car clear opening: 800mm x 2000mm (width x height) Lintel - 2200mm
17) Landing entrance door: Power operated V3F door, Centre opening sliding door - stainless steel (1.5 mm) - hairline finish.
18) Landing entrance frame: stainless steel - hairline finish.
-
-
-
... More
19) Control:- Microprocessor based Simplex selective collective control with / without attendant.
20) Indication: Dot Matrix LED Direction & Position Indicators in car & landings. Puch button;_orange LED illumination.
21) Emergency Alarm Bell: Battery operated alarm bell to be provided with automatic charging device.
22) Emergency light: Battery operated light to be provided with automatic charging device.
23) Fireman's switch : To be provided at ground floor.
24) Minor builder works: To be provided by lift contractor.
25) Scaffolding: To be provided by lift contractor.
26) Stainless steel Sill angles and facia plates: To be provided by lift contractor.
27) Steel for lift machinary :- To be provided by the lift contractor.
28) Servicing and maintenance: Lift contractor should provide free comprehensive servicing and maintenance during the guarantee period.
29) Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc. Complete with all accessories.
30) Provision if Intercom with phone:- To be provided by the lift contractor
31) Lift license: Preparation of drawings, lift contractor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act.
32) Floor announciator with music: To be provided in the car.
33) Special features:
(a) Battery Operated Emergency Light and Alarm Bell
(b) Call Register Signal And Vf Door Operator
(c) Automatic Rescue Device.
(d) Stainless Steel Button with S.S. Cover.
(e) Dot Matrix Led D & P Indicators in Car & Landings - Orange Colour.
(f) Floor Annunciator with Music.
(g) Firemans Switch
-
-
-
... More
(h) False Ceiling in Car.
(i) Fire Rating of Landing Doors-One Hour
(j) Infra Red Door Screen
(k) Overload warning Indicator
(l) Laminated Mirror At Rear Side.
(m) Scaffolding
(n) Two way Intercom with press & speak in Cop
(o) Provision for EBABX
(p) Free Service for One Year
(q) Pit Ladder
(r) Ss Handrail
(s) Lift License
(t) Minor Builders Work
(u) Provision for Cctv Camera - Ip (Cat6 Flat Travelling Cable)
34) Over speed governor, phase failure and phase reversal relay, alarm bell, T Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression spring etc.
35) Guarantee: Gurantee for the materials and lift firm should offer workmanship of equipments complete for a period of not less than one year.
5
-
-
... More
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm –dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E” , bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary etc complete as per standard specification and as directed by the department officers. Best Quality
6
-
-
... More
Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 metres long so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve,including conveyance, all incidental charges, neccessary etc complete as per standard specification and as directed by the department officers. Best Quality
6
-
-
... More
Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.
12
-
-
... More
Supply, and fixing in position of Fire fighting application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.
6
-
-
... More
Supply of Fire fighting application M.S. Hose Box so that to keep two number of Hose and one number of branch pipe with nozzle. It will have proper glass window type double door with universe open key, painted inside white and outside Post Office red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.
6
-
-
... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, chellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.
446
-
-
... More
Supply, erection, testing and commissioning of MS ‘C’ Class heavy pipe as per IS 1239, to with stand a developing pressure of 10 kg/Sq.cm including necessary fittings like MS flange of table ‘E’, Elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding. Including one coat metal primer and two coat post office red painting including conveyance, all incidental charges, neccessary scaffloding and re-doing the dismantled portions to its orginal condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. .
-
-
-
... More
100 mm Dia
60
-
-
... More
80 mm Dia
405
-
-
... More
65 mm dia
539
-
-
... More
50 mm dia
405
-
-
... More
40 mm dia
539
-
-
... More
25 mm dia
807
-
-
... More
Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)
3
-
-
... More
Supply, erection, testing and commissioning of Cast iron body Sluice Valve 150mm dia at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts and as directed by the departmental officers.
12
-
-
... More
Supply, erection, testing and commissioning of cast iron body and Gun metal or stainless steel internal Non return valve of 150mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E', gasket, bolts &nuts , etc. as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
9
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers
3
-
-
... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start & auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: DONFOSS/ INDFOSS/ ISI MAKE / EQUIVALENT.
3
-
-
... More
Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT.
3
-
-
... More
Supply, erection, testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
12
-
-
... More
Supply and fixing of stored pressure ABC(Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6kg. Capacity as per IS Each. 15683 with pressure gauge, discharge hose & control Eachzzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
36
-
-
... More
Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as per New IS Each. 15683 complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
18
-
-
... More
Supply,installation, testing and commissioning of Microprocessor based conventional 12 Zone Fire alarm control panel having the rating of 24 Vot DC power supply, consisting 230/24 volt SMPS unit, 2 Nos 12 Volt, 7 AH standby batteries,suitably mounted on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers.
3
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP), providing on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers
12
-
-
... More
Supply, installation, testing and commissioning of Electronic Hooter/ Sounder, providing on wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers.
12
-
-
... More
Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the DepartmentalOfficers
60
-
-
... More
Supply and laying of FRLS PVC insulated 2 core 1.5 sqmm Armoured Copper cable on ceiling / wall using fixing accessories like screws,plug,clamps and etc., as per standard methods and as directed by the department officers.
750
-
-
... More
Supply,installation,testing and commissioning of 16 Zone Manual Selection type PA Console consisting selector switches for switching 100 volt audio signal for one/multiple/select all mode of operation,working either in AC single phase 220-240 V, 50/60 Hz supply or 24 Volt DC supply, suitably mounted on wall using Mounting bracket fabricated in MS angle,screws,wooden plug etc., as per standard methods and as directed by the department officers.( AHUZA make, SSW-16 model or equivalent make)
3
-
-
... More
Supply, installation, testing and commissioning of 120 Watts, 100 Volt Audio out put Amplifier having 5 Mic input& 2 Aux input, working either in 220-240 Volt, 50/60 Hz single phase AC supply or in 12 Volt DC supply, suitably mounted on wall using Mounting bracket fabricated in MS angle,screws,wooden plug etc., as per standard methods and as directed by the department officers.(BOSCH/Equivalent)
3
-
-
... More
Supply, Installation, Testing & Commissioning of 15Watts, Wall Mounted PA Speakers with line matching transformers, metal enclosures and selected able tap etc., all Complete and as directed by the officers.
39
-
-
... More
Supply and runs of 2 core 1.5 sqmm multi strand shielded Copper Cable for PA wiring between PA console and PA speaker provided in respective Zone existing 20/25mm dia PVC pipe as per standard methods and as directed by the department officers.
1020
-
-
... More
Supply and laying of 25mm dia PVC conduit Pipe in wall or Ceiling using suitable size GI mounting bracket, anchor Fateners,nylon strap etc., as per standard methods and as directed by the department officers.
1020
-
-
... More
Sub Total
-
-
-
... More
GST @ 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%