Hindu Religious And Charitable Endowments Tender

Brick work using using Country Bricks of size 83/4" x4 1/4"x 2 3/4"in Cement Mortar 1:5 (One cement and Five sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5, 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With LIME MORTAR 1:1.3 etc complete.

Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications

Best varnish two coat for teak wood etc., complete complying with standard specification.

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification with one coat zinc chromate primer over the existing priming coat.

Cleaning cut stone using mild hyroflorice acid and power and water pressure inclusive of hire charges of all tools and plants employed, scaffolding arrangements, conveyence charges of all materials to site and labour for work etc., completed as per standard specification.

Pointing the cut stone joints with Cement Mortor 1:3 20mm deep including cost of special tiles such bruch and watering, curing etc complete, as per standard specification.

Labour charges for removing the existing cut stone structure including, numbering all labour charges, hire for all tools and plants for employed, scaffolding charges handling charges hoisting and stacking them in the places shown by the departmentmental officers etc., complete as per standard specification.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.(plint beam)

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).(plint beam)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Cost for Supply of cut stone including cost and conveyance of all labour charges with standard specification.

Labour charges for stone fixing work excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position etc., complete.

Using old stone

sing new stone

Random Rubble masonry work in CM 1:6 Using selected stones and bond stones in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete in all respects complying with relevant standard Specifications.

Brick work using using Country Bricks of size 83/4" x4 1/4"x 2 3/4"in Lime Mortar 1:2 including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Lime Mortar 1:1:5, 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coat with approved Emulsion over the lime plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Sub Total

GST @ 18%