Highways Department Tender

Supply, Installation, Testing & Commisioning of surface mounted compact flexible strip with system wattage of 20W/m RGBW NIVA - 20. Beam angle 120° diffused. Luminaire housing and diffuser made of silicone, UV proof for true outdoor application. High light transmittance, environmental silicone material. Bendable at horizontal & vertical direction. Cut-able for flexible application. Even light distribution & no hot spots. Aluminium mounting clip / Flexible 304 stainless steel mounting channel for surface mounting on ceiling / wall / floor. Protection class IP67. Available colour temperature RGBW. SDCM-3 MacAdam. Operating temperature range is from -15°C to +50°C. Constant voltage non integral power supply at 24Vdc assures safety. Luminaire dimension : 1000mm length x 16mm width x 16 height. The luminaire should be having a warranty for a period of 3 years against any manufacturing defects. CE Certified. Manufacturer should have Inhouse NABL accredited lab. (Make:K Lite/Equivalent)

Supply and run of 1 of No.8 SWG GI wire for in existing GI pipe and trench along with the LTUG cable for pole earthing

Clip - KL 8362 for mounting LED NIVA 20w

Supply, Installation, Testing & Commisioning of 120W WACO PRO LED Street Light with 145 lumens per watt , Side / Top mounted pole top luminaire. Asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass. Protection class IP66, . Mechanical resistance IK08. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 85%, Power factor 0.97, THD 10%, Surge protection 6KV. Suitable for mounting on to 60 mm dia pipe at lateral (side entry) and vertical (top mount) and adjustable angle -15° to +15°.Luminaire dimension : 645mm length x 257mm width x 147mm height. For mounting heights of 6000 - 8000mm. CE & BIS Certified and Manufacturer should have the facilty of Inhouse NABL accredited lab and manufacturing of light fixture.(Make:K Lite/Equivalent)

Supply and clamping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Basic cost of value put to tender as per Estimate

Supply and erection of 250A capacity dust and vermin proof cubical LTCT metering panel board (5 Compartment) 1) cable entry box 2) Cut out box 3) Bus bar 4) TNEB meter 5) Terminal box of size 1.20mx 0.90m x 0.30m made up of 16 SWG sheet steel for outer body with doors and separation etc., and with supply and fixing of following with 25mmx6mm tinned copper bus bar for 3phase and neutral with bus bar insulators with necessary inter connection. The housing to accommodate 1No 3 phase KWH meter 3 Nos 250A fuse unit (re-wirable) and provided with 5mm thick transparent glass in front for reading purpose and with sealing provisions for TNEB. The panel should be painted with two coats of high quality paint over one coat of red oxide with superscription. The above cubical LTCT metering panel board must be rested on suitable angle iron base.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

140w RGBW Controller with Remote Kit for NAVI RGB flood light . (Make:K Lite/Equivalent)

140w RGBW Controller with Remote Kit for LED NIVA 20w

Supply and laying of 4 x 6 sq.mm armoured PVC armoured copper cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply, installation, Testing and Commissioning of 5000 mm pole with Double Arm Monalpole made of circular mild steel pipe (grade YST 210) 88.9mm Dia x 2.9mm thick with 4623mm Height. The double arm bracket is a split constructed type, Bracket stem made of MS pipe 76.1mm Dia x 2.6mm thick, emerging from a forged ring upto a height 290mm covered at the top with MS sheet of 3mm thick. The angular projecting double arm made of MS Pipe 38.1mm x 2mm thick extending from stem on either that facilitate the fitment of luminaire at 600mm on either side from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 80mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6 at CC 180. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black.(Make:K Lite/Equivalent)

Quoted Amount (Basic Rate Only)

Supply and fixing of outdoor junction box of size 104x104x70mm(Make: Hensel/equt) (Model:DK 0404B) with terminals and IP 66 weather protection with necessary connection complete

Supply and clamping of 4 x6 sq.mm LTUG PVC armoured copper cable on post or on wall with suitable special type of MS clamps with necessary connections

Basic cost of value put to tender as per estimate

Supply, Installation, Testing & Commisioning of 9W/m Neon Flex surface mounted compact Linear lighting. Beam angle 120°. Copper coated strip. Silicone moulded diffuser. Flexible bending radius for any shape with easy of installation. Even light distribution & no hot spots. Protection class IP65. Available colour temperature Warm white, Colour rendering index (CRI)80. LED module with expected service life of at least 50,000 operating hours. Constant voltage non integral power supply at 24Vdc assures safety. Luminaire dimension : 1000mm length x 9.4mm width x 15mm height. CE Certified and Manufacturer should have Inhouse NABL accredited lab . Accessories as per site requirement.(Make:K Lite/Equivalent)

Supply, Installation, Testing & Commissioning of driver suitable for Neon Flex 9w per mtr Klite.(Make:K Lite/Equivalent)

Total Value put to Tender

Total Value of Quoted Amount including 18% of GST

Fabricated L Plate for Mounting LED NIVA 20w

Supply, Installation, Testing & Commissioning of driver suitable for NIVA 20w per mtr LED.(Make:K Lite/Equivalent)

Supply, installation, Testing and Commissioning of 9000mm Congo Double Arm pole made of circular mild steel pipe of two section (grade YST 210) Bottom section 139.7mm Dia x 3.6mm thick with 3000mm Height & Top section 114.3mm Dia x 3.2mm thick with 4684mm Height. The double arm bracket is a split constructed type, Bracket stem made of MS pipe 76.1mm Dia x 2.6mm thick, emerging from a forged ring upto a height of 750mm sealed at top with a decorative gravity diecast aluminium flower bud design (111mm Dia x 202mm Height). The angularly projecting double arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from stem on either sides, spruced up with MS sheet between the stem and arm and facilitates the fitment of street light luminaire at 1100mm on either sides from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication,the pole should be processed using shot blasting equipment to achieve the best smooth finish on its surface. The manufacturer should have an in-house shot blast facility to prevent having to reprocess the blasting work due to delay that could affect the bond between the blasted surface of the pole and protective coating. The pole is coated with zinc rich primer & pure polyester powder coating (coating thickness 60- 80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black.(Make:K Lite/Equivalent)

Differnce Amount (Excess/less)

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply, Installation, Testing & Commisioning of 100W Avenue LED Street Light with 125 lumens per watt Side mounted pole top luminaire. Asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass. Protection class IP66. Mechanical resistance IK08. Pure polyester powder coated graphite grey /anthracite grey / jet black. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)70. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 85%, Power factor 0.97, THD 10%, Surge protection 6KV. Inhouse NABL accredited lab and Manufacturer should have Inhouse NABL accredited lab and manufacturing of light fixture.Suitable for mounting on to 60 mm dia pipe at lateral (side entry). Luminaire dimension : 526mm length x 174mm width x 90mm height. CE & BIS Certified.(Make:K Lite/Equivalent)

Add GST at 18% of Quoted Amount

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply, Installation, Testing & Commisioning of wall mounted 50W RGBW NAVI flood light luminaire. Beam angle 10° / 28° / 45°. Extruded aluminium hood cover integrated with die-cast module and extruded aluminium alloy tube, excellent thermal management heat sink & polycarbonate optical lens. Adjustable bracket made of galvanized CRCA sheet (3mm thickness). SS(grade304) mounting clamp 130 x 20 x 1.6mm thick with 4 slot holes Ø7 x 10 to suit coach screws at CC 116 x 94. All external screws are made of stainless steel. Protection class IP65. Mechanical resistance IK10. Pure polyester powder coated graphite grey / anthracite grey / jet black. RGBW, Colour rendering index (CRI)80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency 85%, Power factor 0.95, THD10%, Surge protection 6KV. Luminaire dimension : 329mm length x 166mm diameter x 160mm height. CE & BIS Certified. Manufacturer should have Inhouse NABL accredited lab and manufacturing of light fixture. (Make:K Lite/Equivalent)

Add GST at 18%

Supply and laying of 3 1/2 x 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable in suitable GI pipe with bricks and sand and refilling the earth to make good

Design, Fabrication, supply, and instalation of outdoor kiosk type three phase automatic timer distribution panel made up of 14SWG CRCA sheet housed in suitable size power coated enclourse made85 KW accommodating the following with necessary internal wiring with 25 x 6 mm copper flat a) 250A 4P Switch disconnector fuse with HRC fuse link=1 No (1/C) b) 250A 4P Auto mannual changeover switch - 1No c) 63A Four pole MCB= 6 Nos (O/g) d) 24 Hrs Time switch Astronomical Timer 1 No e)IC 150 AN 4P A422 contactor with 230v coil =1No f) Indication lamp R, Y, B - 1 Set (MCB’s & Timer: Indo Asian / Legrand/equivalent contactor HPL/BCH the metal danger board shall be fixed

Supply, installation, Testing and Commissioning of 9000mm Congo Assymetric ( Differntial Double Arm )Double Arm one arm at 9000mm height and the other side arm at 6000mm pole made of circular mild steel pipe of two section (grade YST 210) Bottom section 139.7mm Dia x 3.6mm thick with 3000mm Height & Top section 114.3mm Dia x 3.2mm thick with 4684mm Height. The double arm bracket is a split constructed type, Bracket stem made of MS pipe 76.1mm Dia x 2.6mm thick, emerging from a forged ring upto a height of 750mm sealed at top with a decorative gravity diecast aluminium flower bud design (111mm Dia x 202mm Height). The angularly projecting double arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from stem on either sides, spruced up with MS sheet between the stem and arm and facilitates the fitment of street light luminaire at 1100mm on either sides from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope.The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication,the pole should be processed using shot blasting equipment to achieve the best smooth finish on its surface. The manufacturer should have an in-house shot blast facility to prevent having to reprocess the blasting work due to delay that could affect the bond between the blasted surface of the pole and protective coating. The pole is coated with zinc rich primer & pure polyester powder coating (coating thickness 60- 80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black.(Make:K Lite/Equivalent)