Highways Department Tender

Bituminous Macadam Providing and laying 50mm thick bituminous macadam using course aggregate and VG30 Bitumen which shall consist of construction in a single course base/binder confirming to the specification on a previously prepared base, (using Mini Hot Mix Plant and Power Roller) including cost of material, labour charges, rentals for machinery,Fuel and all other incidental charges etc., complete as per clause 504 MORTH Rev-5 (For Patch work).

Quoted Rate in Figures (Total Value of Contract Including 18% of GST )

Quoted value

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Providing and laying of Carted Earth including cost and conveyance of the same to work site including all labour charges for conveyance, spreading, laying and compaction with power roller rolling, watering and all tools and plants at site etc., complete. As per MORTH Rev 5 No. 301 & 305

Final Quoted Value

Road A

Tack coat - Providing and applying tack coat over existing BT surface using 2Kg of bitumen emulsion (RS-I type) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 503 of MORTH Rev-5.

Total Value put to Tender

Total Value of Contract Including 18% of GST

Road A

Add GST at 18%

Basic cost of value put to tender as per Estimate

Bituminous Concrete (Table 500-17) Providing and laying bituminous concrete to 30/40mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36 mm and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site,heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mixx to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory to the required density etc., including labour for attending to paver to site etc, including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher, vibratory roller and all other tools and plant required, including fuel and all other incidental cahrges etc., complete as per specificayion using CMP as per clause 507 pf MORTH Rev-5

Add GST at 18% of Final Quoted Value