Highways Department Tender

Total Value put to Tender

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in cement mortar 1:5 (one cement and five M.Sand) using FLYASH BRICKS including cost and conveyance of all materials from approved sources and cement to work site and including labour charges for mixing the mortar, watering with all leads for good water curing and all other incidental charges for working in heights and scaffolding charges etc.,Complete

Supplying, errecting of steel centering and shuttering with necessary strutting arrangements for sides and soffits of RCC slab, lintel etc., complete - 1 m2

Vibrated reinforced cement concrete M20 Mix using ISS HBG metal from approved quarry for all RCC works including cost and conveyance of all materials and cement to work site. and including all cost and labour charges for mixing the concrete, laying, vibrating, watering with all leads for good water and curing and compacting the concrete and all other incidental charges etc., complete such as working in heights, scaffolding charges etc., but excluding cost of Centering, Cost of steel and fabrication charges including fixing fan clamps and fixtures in R.C.C works where ever necessary etc., complete

Quoted Value

Cement concrete 1:4:8 (One Cement Four M.Sand and Eight Aggregates) mix using 40MM ISS size HBG metal from approved quarry including cost and conveyance of all materials and including all labour charges for mixing, watering with all leads for good water and laying compacting and curing the concrete and all other incidental charges such as shoring, strutting, bailing out water etc., complete

Basic cost of value put to tender as per Estimate

Quoted Rate in Figures (Total Value of Contract Including 18% of GST)

Plastering with cement mortar 1:5 (one cement and five M.sand) 12mm thick smooth finishing for internal faces of walls including cost and conveyance of all materials from approved sources and cement to work site. Including all labour charges for mixing the mortar watering with all leads for good water, curing and all other incidental charges etc.Complete.

Supplying and erecting steel Shuttering for plane surfaces in foundation and basement for staircase steps column footings plinth beam grade beam etc.,

Plastering with cement mortar 1:5 (one cement and five M.sand) 20mm thick smooth finishing for External faces of walls including cost and conveyance of all materials from approved sources and cement to work site. Including all labour charges for mixing the mortar watering with all leads for good water, curing and all other incidental charges etc.Complete.

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Quoted Percentage

Supplying Supplying & Providing the Anti Termite treatment of approved quality Pesticide in standard format at foundation, basement and allround the basement for 1.00 meter width including all material & labour charges.

Total Value of Contract Including 18% of GST

Ground Floor

Supply and fixing Doors using Frame Size of 4" x 3" II nd Class Teak Wood & Shutters using 30 mm Thick UNIPLY (or) Century Flush Doors (BWR Grade) The rate includes Labour Charges & for the cost of furniture fittings like S.S Butt hinges, S.S Aldrops, S.S Tower bolts, S.S Door Handles and Door Stopper etc., complete

Supplying and erecting steel Shuttering for plane surfaces in Rectangular column etc

Quoted Rate in Words

Supply & Painting two coats of enamel paint over new iron grills with ISI approved first class enamel matt paint (ICI Paints) over the priming coat of Zinc Chromate Primer including cost and conveyance of all materials to site and all labour charges and all other incidental charges, scaffolding etc., complete as per standard specifications.

Basic cost of value put to tender as per estimate

Add GST at 18%

Earth work excavation for foundation with initial leads and lifts in all soils such as hard stiff clay, stiff black cotton soils, hard red earth, shales, murrain, gravel stoney earth and earth mixed with all size boulders and hard gravelly soil to full depth as directed except hard rock blasting inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation for the column footings with the excavated earth in 15cm layers well watered, rammed and consolidated depositing the surplus earth with in the compound with an initial lead of 10 nits and lift of 2 mts and clearing, levelling sites etc., complete

Ground Floor

Supply & Painting two coats with approved quality Emulsion paint for Ceiling Area for over one Coat White Cement , cement Primer & two coats of Emulson paint )including cost and conveyance of all materials to site and all labour charges for painting including cost of priming coat and all other incidental charges scaffolding etc.,

Supply and fixing Main Door Using First Class Teak Wood frame and Wooden Planks shutters as per drawing. The Rates including cost and conveyance of wood materials resize , fixing & Cost of furniture fittings like Brass Butt hinges, SS Tower bolts, SS Door Handles etc., complete.

Add GST at 18% of Final Quoted Value

Providing and fixing of Factory made Rigid PVC panel doors and frame made from MS tube of 19 s.w.g. size of 19 mm x 19 mm for styles and 15mm x 15mm for rails and covered with heat moulded PVC `C' channel 5mm thick and having width of 50mm to form stiles and rails. The inner panel of 5 mm thick PVC sheets should be inserted between the frame and the panel should be stuck to the stiles and rails along with 5 mm x 25mm PVC beading on all and either sides. Frame for 4 strips of 30 x 5 mm PVC sheet is stuck together on the face and 2 strips of 45mm and 32mm (5mm thick) is stuck on the two edges of above joint piece with PVC solvent cement as shown in the diagram PVC handle 2 nos, 3" SS Hinges 3 nos, 4" Aluminium tower bolt 2 Nos with SS screws.

Manufacturing, supplying and fixing fixed MS grills made out of 40x40x6mm at 3.5 Kg/m are used as the outer frames. MS Angles of size 40x40x6mm at 2.6Kg/m is welded intact withouter frame from 1/3 bottom portion for fixing CR sheet & MS grill 18 GCR sheet is laid as panel & welded intact for 1/3 bottom portion. MS Flat are provided as per design 2/3 top Portion is provided with MS grill of 15Kg/M2 as panel. The design & style for the upper grill work should be approved by the departmental Officers. MS Flat 18 x 5mm at 0.7 Kg/m is welded as additional stiffeners at the rear side of the CR sheet panel. 2Nos of hold fasts of 120mm in length made out of 40x40x6mm MS Angle spliced at the ends are welded to one side of the outer frame & the other side of the outer frame suitable arrangements should be made to be fixed rigidily with adjoining door/ window outer frame. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of materials, labour charges, transportation, taxes & all other incidental charges etc., complete

Supplying and Filling in Basement with approved Earth or Well Gravel (away from the site) including cost and conveyance of earth or well gravel from the approved sources and in layers of 15cm thick including labour charges for filling, watering, consolidated and ramming with the each layers by using the Mechanical Earth Rammer etc., complete as per standard specification.

Foundation & Basement

Brick partition work in mortar 1:5 (One Cement and four M.Sand) using FLYASH BRICKS of size 23 x 11 x 7 cm including cost and conveyance of all materials from approved sources and handling charges for the same, at both ends and including labour charges for mixing the mortar, watering with all leads for good water curing and all other incidental charges for working in heights and scaffolding charges etc., complete.