Highways Department Tender

ROAD A

Granular sub - base with graded Material (Table 400-1) Plant mix method construction of granular sub base by providing close graded Material, mixing in a mechanical mix plant at OMC carriage of mixed material to work site, spreading in uniform layers with motor grader in prepared surface and compacting with vibratory power roller to achive the desired complete as per clause 401 of MORT&H th Revision Specification No. 111,112,406, 900 - Grading - III material for Appaorach

ROAD A

Wet Mix Macadam (Table 400-13) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with Vibratory roller to achive the desired complete as per clause 401 of MORT&H th Revision Specification No. 111,112,406, 900.

ROAD A

Prime coat - Providing and applying primer coat with bitumen emulsion (SS-I type) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 502 of MORTH Specification 111, 112, 501, 502 & 900 Over WMM Surface

ROAD A

Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per clause 503 of MORTH Specification 111, 112, 501, 503, 900- Over granular surfaces treated with primer

ROAD A

Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per clause 503 of MORTH Specification 111, 112, 501, 503, 900- Over granular surfaces treated with primer

ROAD A

Bituminous Macadam Providing and laying bituminous macadam with Hot mix plant using crushed aggregates of specified grading premixed with bituminous binder (Viscosity Grade 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction, complete as per clause 504 of MORTH Specification 111,112,501,504,900 - Grading II (Table 500-7).

ROAD A

Bituminous Concrete (Table 500-17) Providing and laying bituminous concrete with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (Viscosity Grade-30) at percentage specified by Job Mix Formula of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolled as per clause 501.6 and 501.7 to achieve the desired compaction as per clause No. 507 of MORTH Specification 111, 112, 507, 900 complete in all respects-Grading II

ROAD A

Providing RCC Precast Centre Median of size 0.600m at bottom 0.250m at middle 0.150 at top and to height of 0.860m from the road level including cost and conveyance of all materials to work site including picking the existing B.T surface if necessary and excavating the necessary depth to have a median, and providing form work for shuttering on both sides and chamfered edges at top, including cost of steel reinforcement as per the Bar bending schedule appended here with, fabrication and placing in position of steel grills including cost of binding wire, laying of R.C.C M40 concrete using ISS HBG graded metal including cost and conveyance of all materials to work site from the approved sources including labour charges for mixing laying curing etc middle of the median as directed by the departmental officers, Rendering Smoothness over the CC surface with 10 kg of cement for 10 sqm area and painting two coats over the CC surfaces with best approved quality of synthetic enamel paint including primer etc., including all labour charges, hire and fuel charges for the tools and plants employed and as per the standard specification and in accordance with the drawings appended here with Rigid Median Marker and as directed by the departmental officers etc., complete.

ROAD A

Providing and fixing of Solar Blinker

ROAD A

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Basic cost of value put to tender as per estimate

Add GST at 18%

Total Value put to Tender

Excess/Less Percentage

Final Value

Add GST at 18% of Final Value

Total Value of Contract Including 18% of GST

Basic cost of value put to tender as per Estimate

Quoted Rate in Figures (Total Value of Contract Including 18% of GST )