Highways Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Highways Department Tender
Civil And Construction
Bridge Construction
Eprocure
Opening Date23 Jan 2025
Closing Soon12 Feb 2025
Tender Amount₹ 7,12,15,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class-1
Bid Capacity
... View More
The bid capacity required to execute the work should be greater than Rs. 712.15 Lakhs. The bid capacity can be calculated using the formula: Assessed available bid capacity = (A x N x 2 - B), where A is the Maximum value of construction works executed in any one year during the last five years, B is the Value at current price level of the existing commitments and ongoing works to be completed during the next 7 months, and N is the Number of years prescribed for completion of the works. Additionally, the bid capacity required is at least 10% of the estimated contract value, which is Rs.71.21 Lakhs. The estimated contract value can be calculated as Rs.712.1 Lakhs. Therefore, the bid capacity required is at least Rs.71.21 Lakhs.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed at least one contract of at least 40% of the value of the proposed contract in any one year within the last five years, with a value of at least Rs. 285.00 Lakhs. The bidder should also have experience in similar nature of work, including completion of minimum quantities of works such as 13.00 RM of bridge length, 193.00 CUM of PCC/VRCC, 17.00 MT of steel, and 42.00 MT of structural steel in one year during the last five years. The experience requirements vary based on the value of the works, ranging from one B.E Degree Holder or one Diploma Holder in Civil Engineering with five years of experience for works up to Rs. 2.00 Crore, to four B.E Degree Holders and eight Diploma Holders in Civil Engineering with one year and five years of experience, respectively, for works above Rs. 200.00 Crore. The bidder should also have achieved an average annual turnover of at least 40% of the value of the contract applied for, which is Rs. 285.00 Lakhs, over the last five years. The bid capacity to execute the work should be greater than Rs. 712.15 Lakhs. Values and percentages mentioned include:
- Value of contract: Rs. 285.00 Lakhs
- Percentage of progress
- Average annual turnover: 40% of the value of the contract applied for
- Bid capacity: greater than Rs. 712.15 Lakhs
- Minimum quantities of works completed: 13.00 RM of bridge length, 193.00 CUM of PCC/VRCC, 17.00 MT of steel, and 42.00 MT of structural steel
- Value of contract for experience requirements: up to Rs. 2.00 Crore, above Rs. 2.00 Crore to Rs. 10.00 Crore, above Rs. 10.00 Crore to Rs. 50.00 Crore, above Rs. 50.00 Crore to Rs. 100.00 Crore, above Rs. 100.00 Crore to Rs. 200.00 Crore, and above Rs. 200.00 Crore.
Costs
EMD
₹ 3,67,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HWAY_520054_1Tender No
Palani Foot Over Bridge / MDU 125 TN No 33 2024 25 HDO Dated 08 01 2025Tender Authority
Highways Department ViewPurchaser Address
-Website
http://https://tnhighways.gov.in/index.php/en/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Vibrated Reinforced Cement Concrete of grade M30 (Design Mix) using 20mm ISS size hard broken granite metal including cost and conveyance of all materials to site, cost and labour charges for formwork, cost of soft water, labour charges for mixing, transporting, laying, compacting and curing, working at depths, Tools and Plants and incidental charges such as bailing out water, shoring, strutting etc., complete for FOOTINGS as per relevent MORT&H specification Cl:1000,1500,1600 &1700.
379.3
13805
5236475.46
... More
Supply and fabrication of HYSD STEEL of grade Fe 500 D/CRS/HCRM/Anti corrossive treatment including cost of steel, cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, placing the reinforcement in position as specified in the drawing including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete for FOOTINGS, PEDESTALS and DRAIN CUM FOOTPATH as per relevant MORT&H Specifications Cl:1600.
38
95609
3633152.26
... More
Supplying, fabricating and erection of Structural Steel works as per detailled drawing and technical specifications, comprising UB sections, IS Channel sections, IS angles, plates, tees, flats, pipe, tube sections and other structural steel sections including cutting, bending to shape, welding and traffic management, lighting, safety arrangements, tools and plants etc., complete for SUPERSTRUCTURE OF FOOT OVER BRIDGE as per relevant MoRTH Specifications Cl:1900. The Contractor shall submit the fabrication drawings for the work invloved based on the construction drawings ( issued by the department) for approval by the Engineer- in -charge before commencing the fabrication works. Any changes required in the fabrication drawings shall be carried out at no extra cost. Fabrication works shall be carried out in a professional workmanship manner and as provided in Section 17 of IS 800-2007. Welding shall be carried out by qualified welders and electrodes for welding, erection/hoisting shall commence only after the approval of pre fabricated parts by the Engineer-in-charge. The procedure, selection, test and inspection shall conform to the provisions in IS 816, IS 818, IS 822 & IS 823
102.9
120753
12425540.3
... More
Vibrated Reinforced Cement Concrete of grade M35 (Design Mix) using 20mm ISS size hard broken granite metal including cost and conveyance of all materials to site, cost and labour charges for formwork, cost of soft water, labour charges for mixing, transporting, laying, compacting and curing, working at depths, Tools and Plants and incidental charges such as bailing out water, shoring, strutting etc., complete for DECK SLAB with kerb over decking sheet as per MORT&H specifications Cl:1000,1500,1600, 1700 and 2300.
35.7
9910
353806.64
... More
Supply and fixing of Pre-fabricated Structural Steel DECKING SHEET having minimum 345 Mpa yield strength, colour coated Galvanised Steel with Z275 (min 275 g/m2 Zinc coating as per IS:277 or equivalent Standard. The structural decking panel shall have 915 mm effective width (Overall Width of 931mm), nominal crest height 50 mm deep ribs at 230 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action and shall have the thickness of 1.25 mm BMT for fixing using shear studs of required length as per Concrete thickness at site (165mm Avg) with self drilled screws and EPDM wahers.
237.8
1690
401882
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
568.2
5536
3145555.2
... More
Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges.
566.3
690
390747
... More
Providing and applying one coat of Zinc oxide primer and two coats of Anti Corrosive paint of Colour as directed by engineer in charge on structural steel , etc all complete as per technical specification in accordance with IRC 24-2010 and other relevant MORT&H Specifications Cl:1906.
102.9
4274
439794.6
... More
Brick masonry in Cement Mortar 1:6, 230 mm thick using best quality II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" including cost towards curing, etc., complete complying with standard specification.
69.4
7108
493336.15
... More
Plastering with Cement Mortar 1:4 (one cement & four sand), 12 mm thick on brick work for internal sides of walls in all floors as per Technical Specifications
43.6
550
24017.06
... More
Chequerred precast Cement based hydraulically pressed anti-skid (Pattern Design) tiles, 20mm thick laid in CM 1:3 (one cement & three sand) and pointed with white cement mixed with colouring pigment @ 0.40 Kg/Sqm and cost towards curing,etc., Complete for Main Skywalk, Staircase, Kerb as per technical specifications.
387.9
1418
550042.2
... More
Supply and erection of public service HEAVY DUTY ESCALATORS outdoor type (GS8000-NX) with the Techniccal Specification as Step Width:1000mm, Rise:6500mm, Inclination Angle:30 degree, Speed: 24m/min, Power supply:220V/400V, 50Hz. Material Specification such as Handrails made of Polyuerthane(Blood red colour), Handrail frame of Hairline(finished stainless steel), Deck cover of Hairline(finished stainless steel), Interior panel-Balustrade of TYPE-P (Stainless steel), Skirt Guard of Hairline (finished stainless steel), Step tread of Stainless steel with synthetic Resin Demarcation(Yellow), Floor plate Comb of Synthetic Resin (Yellow), Landing plate of Aluminium including all necessary safety devices & accessories, comb light shall be mounted on the skirp guard with 1m center to center arrangement and complete in all respects and as directed by the Engineer-in-Charge.
4
5953390
23813560
... More
Passenger Lift MRL, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD. (13 Persons)
2
2150000
4300000
... More
Supply of 125 KVA DIESEL GENERATOR as per CPCB-2 norms at 1500 RPM under NTP conditions complete with standard accessories rated at 125 KVA 0.8PF (lag), 415V, 3phase, 4wire, mounted on a common iron based frame, suitably rated battery with leads, silencer, fuel tank, manual Control Panel and set of AVM pads, composite type enclosure and AMF panel suitable for 1 EB connection shall be kept outside and inside enclosure (in lieu of Manual Control Panel) with all other neccesory accessories and complete in all respect as per relevant technical specification and as directed by the Engineer-in-Charge.
2
1601000
3202000
... More
CONSTRUCTION OF MAINTENANCE & GENERATOR ROOM
-
-
-
... More
Earthwork in excavation of Foundation of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling the excavated soil in the Centre Median for shrub plantation and conveyance of excess earth for proper disposal upto a lead of 10 km including supervision charges, watch and ward, , Traffic management complete as per relevant MORT&H Specifications cl: 301&304.
21.8
386
8430.5
... More
Plain Cement Concrete M15 Grade using 20mm ISS size hard broken granite metal including cost and conveyance of all materials to site,cost and labour charges for form work and centering, labour charges for compacting, curing and all incidental charges etc., complete for LEVELLING COURSE BELOW FOOTINGS as per relevant MORT&H Specifications cl: 1000&2100.
1.5
6714
10071.3
... More
Vibrated Reinforced Cement Concrete of grade M30 (Design Mix) using 20mm ISS size hard broken granite metal including cost and conveyance of all materials to site, cost and labour charges for formwork, cost of soft water, labour charges for mixing, transporting, laying, compacting and curing, working at depths, Tools and Plants and incidental charges such as bailing out water, shoring, strutting etc., complete for FOOTINGS as per relevent MORT&H specification Cl:1000,1500,1600 &1700.
3
19031
57093.84
... More
Vibrated Reinforced Cement Concrete of grade M30 (Design Mix) using 20mm ISS size hard broken granite metal including cost and conveyance of all materials to site, cost and labour charges for formwork, cost of soft water, labour charges for mixing, transporting, laying, compacting and curing, working at depths, Tools and Plants and incidental charges such as bailing out water, shoring, strutting etc., complete for FLOOR SLAB CUM BEAM AND LINTEL OF MAINTENANCE ROOM as per relevent Specifications of MORT&H Cl: 1000,1500,1600,1700&2300
14
20445
286241.62
... More
Supply and fabrication of HYSD STEEL of grade Fe 500 D/CRS/HCRM/Anti corrossive treatment including cost of steel, cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, placing the reinforcement in position as specified in the drawing including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete for for WALLS OF MAINTENANCE ROOM upto ground level as per relevant MORT&H Specifications Cl:1600.
2.1
95609
200779.47
... More
Brick masonry in Cement Mortar 1:6, 230 mm thick using best quality II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" including cost towards curing, etc., complete complying with standard specification.
27.9
7108
198329.66
... More
Plastering with Cement Mortar 1:4 (one cement & four sand), 12 mm thick on brick work for internal sides of walls in all floors as per Technical Specifications.
134.2
275
36992.23
... More
Plastering with Cement Mortar 1:4 (one cement & four sand), 20 mm thick on brick work for external sides of walls in all floors as per Technical Specifications.
209.4
550
115347.99
... More
Providing and applying two coats of acrylic paint to the external and internal surfaces of plastered finish, using exterior quality acrylic weather shield paint of approved shade and make including preparing the base surface, attending to broken edges, corners etc. as per technical specifications.
344
124
42721.36
... More
Flooring with first quality design Coloured Ceramic tiles of 305 x 305 x 6 mm size, laid over 20mm thick Cement Mortar 1:3 (one cement & three sand) base mortar over walls including cutting the tiles to required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment @ 0.30 Kg/sqm etc., complete as per technical specifications.
38.7
1042
40329.27
... More
Supplying, fabricating and fixing in position of aluminium anodized DOOR partly half glazed at top and half panelled at bottom with frame made out of box section 101.6 x 44.5 x 3.18 mm thick @ 2.319 kg/m door shutters made out of box section 47.1 x 44.45 x 2.50 mm @ 1.202 kg/m for vertical slide and top, lock rail sections of size 50 x 44.5 x 2.5 mm @ 1.292 kg/m and bottom 100.4 x 44.45 x 2.5mm @ 1.974 kg/m using clips of size 17.15 x 17.27 x 1.50 mm @ 0.176 kg/m with neccesary metal screws, rubber beadings, strike plate type handle of size 100 x 30 x 1.60 mm @ 0.988 kg/m on both sides, tower bolts, lock pivot arrangements and top half portion with 5.50 mm thick plain glass and bottom half portion with one side pre-laminated board (MDF) 12mm thick for panelled portions with one number of hydraullic door closure of approved quality using alluminium extruded section body tubular type universal with double speed adjustment with ISI Monogram including cost of furniture fitting such as pivot, hinges, tower bolt, lock, door stopper and all materials , labour power consumtion required for fabrication,drilling required for fabrication,drilling holes in RCC columns, floor slabs, Masonry walls wherever neccessary with power drills to the required extent and make the same to original condition after fixing and as directed. All the alluminium sections are to be anodized with mat finish under electrical controlled condition in accordance with IS:1868 - 1962 for an average anodic film thickness of 15 microns etc., complete. The rate shall be inclusive of materials, labour for fixing, transporting, loading ,unloading etc.,
4.2
6110
25663.64
... More
Supplying, fabricating and fixing in position aluminium natural colour matt finish WINDOWwith sliding and gutter arrangements so as to drain the water entering and made with extruded aluminium section of the sizes given below with necessary accessories such as rubber beadings, best quality runner, lock, handle supplying and fixing 4 mm thick plain glass including cost of all materials, labour, power consumption required for fabrication, drilling holes in RCC Column/floor slab/masonry wall wherever necessary with power drills to the required extent and made same to original condition after fixing etc.,complete. The aluminium sections are to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868-1962 for an average anodic film thickness of no less than 15 microns. All aluminium sections and furniture fittings shall be got approved by the Engineer-in-Charge before use on works.
9.4
3302
31045.57
... More
Supplying and erection of push and pull type ROLLING SHUTTERS (Gear Operated type) with ISI make of approved size and section using 18 G.I. sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges,etc.,
7.2
2419
17416.8
... More
Calculation of SubTotal, GST and Total Amount carried out by system automatically
-
-
-
... More
Basic cost of value put to tender as per estimate
1
60349965
-
... More
Add GST at 18%
1
10862994
-
... More
Total Value put to Tender
1
71212959
-
... More
Excess/Less Percentage
1
-
-
... More
Final Value
1
-
-
... More
Add GST at 18% of Final Value
1
-
-
... More
Total Value of Contract Including 18% of GST
1
-
-
... More
Basic cost of value put to tender as per Estimate
-
-
60349965
... More
Quoted Rate in Figures (Total Value of Contract Including 18% of GST )
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%