Highways Department Tender

Providing and erecting Direction and Place Identification Retro - reflectorised signs made out of cube corner micro prismatic grade sheeting cofirming to Type-IVstandards of IRC-67: 2012 ASTM D 4956 - 09, specificaton and fixed over 2mm thick aluminium sheet fixed over back supporting frame of 25mm x 25mm x 3mm mild steel angle and supported on a mild steel angle post 75mm x 75mmx 6mm with a clear height of not less than 2.10m from the ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x60cm size including cost and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. Micro Prismatic grade Retro - reflectro sheet shall consist of minimum coefficient of Retro - reflection as per table 6.9 of IRC: 67-2012. The retro - reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of three years outdoor exposure report shall be obtained as per IRC: 67-2012 (as per MORT&H specification No.801) (For location of black spot, curve, sharp bend, junction, ghat roads and criticaal zone applications)

Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms. per sqm. area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes etc complete as per MORT&H specification No.803.

Providing fixing of rigid Median marker sided made of polycarbonate for impact resistance and good weather ability - Reflective sheeting confirming to Type XI Specification as per ASTMG155