Highways Department Tender

90cm Equilateral triangle

60 cm circular

90 cm octagon

60Cm Equilateral Triangle

80Cm x 60Cm Rectangular

60Cm x 45Cm Rectangular

60x60cm square

Providing and erecting of Direction and Place Identification Retro-reflectorised Sign made out of High Intensity Prismatic Grade Sheeting confirming to. Type-IV standards of IRC-67: 2012 land ASTM D 4956 -09, specification and fixed over 2mm thickAluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45emX45cmX60cm size including cost and conveyance of all materials, equipment. Machinery and labour with all leads and lifts, loading charges necessary For satisfactory completion of the work as directed by the engineer in charge. High intensity Retro ReJectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC157-2012 The retro- rellective sheeting shall be covered under 7 year warranty issued For field perForinance and a certified copy of three vears outdoor exposure report shall be obtained as per IRC 67 2012 (as per MORT&H Specification No.801)

Rate per Sqm (For Sign having area upto 0.90 sqm) Type-IV

Rate per Sqm (For Sign having area upto More than 0.90 sqm) Type-IV

Supplying and installation of delineators (road way indicators, hazard markers and object markers), 80-100 em high above ground level, painted at alternatively black and white in 15 cm wide strips, fitted with 80 × 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and apnForming to IRC-79 etc., complete (as per MORT&H specification No. 806)rker For distinct identification. at 6m intervals

Providing fixing of Median marker double sided made of polycarbonate For impact resistance laininum loa her pact strengive an tun are used in an obamA he eradire, marker seal travel minimum Izod impact strength value of 600 J/m at room of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 For 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the Form of an isosceles trapezoidal structure of length 15 em height and width of 10 × 10 cm. The median marker shall have fluorescent yellow retro - reflective sheeting confirming to Te XI specifications as per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 .Edge of retro reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker For distinct identification. at 6m intervals

Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956 -09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm and 0.60m below ground level..The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary For satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued For field perFormance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012. (as per MORISH Specification No.801)

Providing and fixing of retro-Reflectorised cautionary star sign made out of high intensity primatic grade reflective sheeting stricked over CR sheet 0.20 mm / 32.G thickness with black enamel paint firmly fixied with 1 1/2" x 14 G wire nails of size 100 mm x 100 mm.

Providing and fixing of Digitally Retro Reflectorized Overhead Cantilever Informatory signs made of cube corner Micro Prismatic grade sheeting conforming to Type XI standards of IRC67 - 2012 and ASTMD4956 – 09 specification and and Fixed over 2mm thick aluminum Sheet fixed on back Supporting Frame mild sheet L angle of size 50 mm x 50 mm x 6 mm . The Vertical support post for the installation of overhead sign Gantry shall be Made of 300NB (Nominal Bore) MS Pipe with 12 mm thick with a ground clearance of 6 meters along with 80 NB (Nominal Bore) MS Pipe with 4 mm thick and 40 NB (Nominal Bore) MS Pipe with 3.2 mm thick support posts. MS base plate of size 1200mm x 1200mm x 25mmand MS top plate of size 900mm x 1650 mm x 16mm to be used to hold the sign board at the top and bottom respectively. MS stiffener plates 8mm thick of sizes 420x420, 682x420, 288xx288, , 288xx927 & 44x130 are to be used. Anchor blots of dimlension 25mm dia and 1000mm length are to be efficient of retro reflection values against the values as mentioned in tables 6.9 of IRC67 - 2012. The latex printer used for digital printing should be links with the VOC emissions and have green gaurd , eco logo certificates as per UL 2801 standards . The retro-reflective sheeting shall be covered under 10 years warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obatined as per IRC 67-2012(As per moRT&H specification No.801) . cantilever sign shall be installed at the site as per the structural and foundation drawing provided in the tender document and including cost and conveyance of all materials, equipment, machineries to worksite, including all labour charges for fixing the gantry in postion with all leads and lifts loading charges and necessary for satisfactory completion of the work as directed by the engineer in charges etc.. complete.

Digitally Printed Retro Reflectorized Overhead Gantry Informatory sign Board Providing and fixing of Retro Reflectorized Overhead Gantry Informatory signs made of cube corner Micro Prismatic grade sheeting conforming to Type XI standards of IRC67 - 2012 and ASTMD4956 – 09 specification and and Fixed over 2mm thick aluminum Sheet fixed on back Supporting Frame mild sheet L angle of size 50 mm x 50 mm x 6 mm . The Vertical support post for the installation of overhead sign Gantry shall be Made of 300NB (Nominal Bore) MS Pipe with 12 mm thick with a ground clearance of 6 meters along with 80 NB (Nominal Bore) MS Pipe with 4 mm thick and 40 NB (Nominal Bore) MS Pipe with 3.2 mm thick support posts. MS base plate of size 1200mm x 1200mm x 25mmand MS top plate of size 900mm x 1650 mm x 16mm to be used to hold the sign board at the top and bottom respectively. MS stiffener plates 8mm thick of sizes 420x420, 682x420, 288xx288, , 288xx927 & 44x130 are to be used. Anchor blots of dimlension 25mm dia and 1000mm length are to be used as fixtures. the approved direction information should be digitally printed and should have 70% of the co-efficient of retro reflection values against the values as mentioned in tables 6.9 of IRC67 - 2012. The latex printer used for digital printing should be links with the VOC emissions and have green gaurd , eco logo certificates as per UL 2801 standards . The retro-reflective sheeting shall be covered under 10 years warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obatined as per IRC 67-2012(As per moRT&H specification No.801) . cantilever sign shall be installed at the site as per the structural and foundation drawing provided in the tender document and including cost and conveyance of all materials, equipment, machineries to worksite, including all labour charges for fixing the gantry in postion with all leads and lifts loading charges and necessary for satisfactory completion of the work as directed by the engineer in charges etc.. complete of size 12.00m x 1.80m

Proving and fixing Solar powered Traffic Blinkers of 30cm dia with Polycarbonate Dome 5mm Red of Led 150 Nos. iri each Red Blinkers Light - 1 No. with Red / White / Blue Led Blinkers Delineator Solar Panel : 12v 50w Solar Panel 1 No. 12v 18 AH Battery - 1 No. with Box, Solar Circuit Controller Board Box. Straight Pole : MS Pole 3” dia 2.5mm thick 18 Feet height pole (1 No.) with 2 Feet under ground pole foundation, pole painting including transportation charges, installation charges etc., complete as per standard specification.

Supply and fixing of Kilometre stone of standard design and drawing as per IRC:8-1980 (second revision), including painting and numbering etc., and all other incidental charges etc., omplete.

Supply and fixing of HM stone of standard design and drawing as per IRC:26-1967, including painting and numbering etc., and all other incidental charges etc., complete.

Supply and fixing of RCC guide post of size1.20 x 0.20 x 0.20 m with reflective star stickers with tin M.s sheet with two side packing and top cover of 0.75 inches in RCC 1: 2: 4 Mix using 20 mm HBG ISS metal with 10 mm. dia bars as vertical with 8mm dia Stirrups including 8.25 inches x 4.25 feet mould with star shape of 5 inches and top projection by 0.75 inches x 3 inches including cost and conveyance of materials to worksite etc., complete.,

Providing and erecting Single sided Single Guard Metal Beam Crash Barrier System (Type - A, “W” Single Guard)1.80m high, comprising of 3mm thick wall “W” beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having Zinc Mass of 550gms/ sqm, minimum 700 mm above road/ ground level fixed on ISMC series channel vertical post 150x75x5mm spaced 2m center to center 312mm x 83mm flange width x 3mm thick, 4318mm long post directly embedded in the concrete (M15) pit size 350x350x800mm for a depth of 1100mm below ground. All fixing bolts and nuts hot dip galvanized conforming to IS:1367 clause 4.60 all complete as per Technical Specification of IRC 119 2015 and as directed by the Engineer-in-charge

Providing and fixing of Digitally Printed Retro Reflectorized Sign Board using UV Inkjet Printer made out of cube corner micro prismatic grade sheeting of Type-XI standards of IRC 67-2012 and ASTM D 4956 – 09 specification, Digitally Printed using UV Inkjet Printer (UVIJ) for traffic colour, images/ logos/ text and laminated with clear electrocuttable film and applied to properly prepared sign substrates, fixed over 2mm Aluminium sheet with back supporting frame of 50x50x6mm Mild Steel ‘L’ angle and supported on a 150NB (Nominal Bore) pipe with 4.50mm thick with an overall height from top of the board to foundation. The sign board should be of 2.10m clear height from the ground level to the bottom of the sign board and 1.10m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete of size 450x450x1100mm including cost and conveyance of all materials, equipment, machineries to worksite, including all labour charges for fixing the gantry in position with all leads and lifts, loading charges and necessary for satisfactory completion of the work as directed by the engineer-in-charge etc., complete. The Micro prismatic sheeting should have minimum 70% co-efficient of Retro-reflection values as per table 6.90 of IRC 67-2012. The retroreflective sheeting shall be covered under 10 Years warranty issued for field performance and a certified copy of 3 years outdoor exposure report shall be obtained as per IRC 67-2012. The warranty shall be inclusive of digitally printed images/ logos/ test/ legends and their bonding to the retro-reflective sheeting (as per MoRT&H specification no.801) of Size – 3.64m x 2.42m

Calculation of SubTotal, GST and Total Amount carried out by system automatically

Basic cost of value put to tender as per estimate

Add GST at 18%

Total Value put to Tender

Quoted value

Final Quoted Value

Add GST at 18% of Final Quoted Value

Total Value of Contract Including 18% of GST

Basic cost of value put to tender as per Estimate

Quoted Rate in Figures (Total Value of Contract Including 18% of GST )