Highways And Minor Ports Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Highways And Minor Ports Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Mar 2023
Closing Date27 Apr 2023
Tender AmountRefer Documents
Costs
EMD
₹ 27,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CKICP_294145_1Bid Award Id
ViewTender No
OCB/CKICP/HRS-FTY/01Tender Authority
Highways And Minor Ports Department ViewPurchaser Address
-Website
http://http://www.tn.gov.in/department/13
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
HRS-FTY-Specifications-Employers-Requirement
HRS-FTY-Conditions-of-Contract-and-Forms
HRS-FTY-Instructions to Bidders
HRS-FTY-Eligibility-Conditions
BOQ Items
... More
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
700
-
-
... More
Supplying and filling in foundation, basement, etc with filling Quarry Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
1100
-
-
... More
Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
450
-
-
... More
Cement Concrete 1:5:10 (One Cement, Five Crushed stone Sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone ielly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
575
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10 cm x 6.5 cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
1610
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. Foundation to 3rd floor
9300
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
600
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
4200
-
-
... More
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
For Foundation and Basement
230
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
For Foundation and Basement
1100
-
-
... More
For Ground Floor
580
-
-
... More
For First Floor
590
-
-
... More
For Second Floor
590
-
-
... More
For Third Floor
120
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire)
4735
-
-
... More
Post Tensioning Work:
Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.
24
-
-
... More
Brick work in following Cement Mortar 1:5 (One cement and five sand) Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
... More
For foundation & basement
290
-
-
... More
Brick work in following Cement Mortar 1:6 (One cement and five sand) Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
... More
In GROUND FLOOR
270
-
-
... More
In FIRST FLOOR
250
-
-
... More
In SECOND FLOOR
250
-
-
... More
In Third FLOOR
120
-
-
... More
Brick partition walls of 11.50cm thickness using Fly Ash Bricks of 230 x 110 x 75mm size comforming to IS: 12894-1989 class designation not less 50 kg./sq.cm average compressive strength in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
... More
In Ground Floor
400
-
-
... More
In FIRST FLOOR
310
-
-
... More
In SECOND FLOOR
430
-
-
... More
In Third FLOOR
60
-
-
... More
Paving the floor with best quality Double Charged Vitrified Tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand)20mm thick in all floors and the top pointed with the white cementmixed same colour pigments etc., complete complying withstandard specification.(The make and brand ofthe tiles should be got approved by Executive Engineer before use on works)
4820
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
390
-
-
... More
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
230
-
-
... More
Brick jelly Lime Concrete of 1:2:5 (One Lime,Two Sand and Five Brick ielly ) with 40 mm hand broken brick ielly for Sunken portions including dewatering wherever necessary and laid in layers of not more than 15cm thick, well rammed, consolidated and curing etc. complete complying with standard specification.
140
-
-
... More
Providing, mixing, laying polymer based water proofing treatment for the Sunken Toilet / Lift well / OHT Rcc wall by applying cement based, flexible, waterproofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab / floor slab as per specifications mentioned above providing cement mortar 1:3, waterproofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of grouting with cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cm2 to a length of 45cm for drip pipes, etc. complete.
970
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
550
-
-
... More
Flooring with Self design Joint free rectified Ceramic Tiles of size 305 x 305 x 8mm laid over 20mm thick cement mortar 1:3 (Onecement and Tree sand) base mortar over the existing slab / floorincluding cutting the tiles to the required size with special cutterwherever necessary, laying in positionand and pointing with whitecement mixed with colouring pigment at the rate of 0.3 kg. / sq.m.etc., complete complying with standard specification. (The makeand brand of the tiles should be Johnson / Kajaria / Somany / Nitco/ RAK or Equivalent which has to be got approved by Executive Engineer before use on works)
310
-
-
... More
Dadooing walls with Joint free rectified Colour designed digital print ceramic tiles, with borders, with size of 300mm x 600mm x 10mm and above setin Cement Mortar 1:2 (One Cement and Two sand) 20mm thick andpointing the joints with white cement mixed with colouring pigmentsat the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by thedepartmental officers. (The make and brand of the tiles should belike Johnson / Kajaria / Somany / Nitco / RAK or Equivalent whichhas to be got approved by Executive Engineer before use on works)
1080
-
-
... More
Clading the walls by supplying and fixing of White Galaxy or equivalent quality of granite vertical slab for an average thickness of 17mm to 20mm for vertical surface over a base layer in cement mortar 1:2,10 mm thick and pointing with the same mortar as directed and agmi, Aroldate and POP Paste for fixing the granite slab in position wherever necessary.The quality and colour of granite slab should be got approved by the Executive Engineer before use on works
55
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick ielly lime being 32:12.5 by volume and laid over the RCC roof slab in single layer of required slope and finishing the beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime iaggery water etc., complete as per standard specification and as directed by the departmental officers.
440
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230x230x20mm of approved quality set in cementmortor 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and ioints pointed neatly to full depth of tiles with same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with the standard specification and as directed by the departmental officers.
1950
-
-
... More
Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below.(Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing, etc., complete and as directed by the departmental officers.(The chemical should be got approved by Executive Engineer before use on work). Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation.Stage-2: Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth.Stage-3: Spraying anti-termite chemical solution on the sand for the flooring before laying the flooring concrete.This treatment has to be carried out on the sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring thoroughout.Stage-4: Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment
1830
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.complete
95
-
-
... More
Providing grooving to granite slab at the intermediate edges of the vertical face with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete
305
-
-
... More
Providing Double semi nosing to granite slab at the edges of the vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete
305
-
-
... More
Supplying and fixing Teak Wood frames for doors Windows and Ventilators using required MS angles, flats and rods of approved design and as directed by the departmental officers including cost of MS Grills, labour charges and cost of one coat of red oxide primer with labour charges for priming coat etc. complete complying with standard specifiction.
-
-
-
... More
Single leaf Door
4.5
-
-
... More
supplying, hold fast of M.S flats of over all size of 330 x 50 x 6mm suitably folded to the required L shape have two end of lap of 50mm long each and overall length of the horizontal portion as 230mm & including making necessary grooves in two end laps to accomadate screws etc., complete.
40
-
-
... More
Supplying and fixing in position of Teak wood door shutter using spl quality teak wood planks of 40mm thick panelled doors with ornamental designs,engraving and kadasal wherever necessary including required raw materials,Brass hinges,Brass tower bolt,ornamental Brass handles, Door stopper,Brass aldrops and bush with suitable locking arrangements etc. The rate should be inclusive of cost of all materials, labour charges for wrought and put up the doors with transporting charges etc complete complying with standard specification and as directed by the Departmental officers.
11
-
-
... More
Supplying and fixing in position of flush shutter with teak wood vener for doors of 35 mm thick block board core with of applied shade and hot pressed bonded with liquid phenol formaldluide resin with internal lifting with TW as per IS 2201/ part I /1991 The rates inludes the labour charges for fixing the shutter to the frames and for fixing furniture fiitings.The rate include the cost of furniture fittings etc complete
-
-
-
... More
Flush Door Single leaf - 35mm thick
115
-
-
... More
Flush door double leaf - 35mm thick
85
-
-
... More
Polishing the teakwood panelled door / Windows/ Ventilator with best melamine varnish finishing including labour charges for scrapping the existing T.W panelled throughly on both sides of the door, sand papering without affecting the teakwood plank grooves and natural design with preparation of surface using sand paper and finishing the smooth wooden surface and applying of melamine polishing on the teakwood panelled door/ partition surface using spray machine on uniform layer of smooth surface formed without any air bubbles after finishing the work etc., the rate inclusive of cost of materials ,labour charges ,transportion charges, labour for scrapping charges, etc complete complying with standard specification and as directed by the departmental officer (the materials quality are approved by the EE Before use of work.
-
-
-
... More
Single leaf Door
605
-
-
... More
FOAMED PVC DOOR FRAME
Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3Nos to be provided for each vertical member, GI stiffeners of ('U'channel of size 29x9,1mm, 150mm long) -3Nos. at hinge point, frame reinforcement of ('U'GI channel of size 46x22x0.6mm), bottom tie rod of('U'GI channel size of 15x15x1mm),etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work
215
-
-
... More
ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm -2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges -3 Nos.,for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work
80
-
-
... More
Supplying,fabricating and fixing in position of aluminium anodized natural colour matt finish door fully PLB Board 12 mm thick Sliding door using rectangular aluminium box section of sizes of frame section 101.60 x 44.45 x 3.18 mm @ 2.399 Kg./M Shutter Sections Top and Middle Section 50 x 44.45 x 2.50 mm @ 1.292 Kg./M, Bottom Section 100 x 44.45 x 2.50 mm @ 1.974 Kg./M, Vertical Style 50 x 44.45 x 2.50 mm @ 1.292 Kg./M with necessary accessories such as aluminium clips, handles,lock and sliding channel with wheel set including all materials, labour and power consumption charges required for fabrication if necessary clipping, dismantling materials necessary holes in RCC column beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc. complete. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than 15 microns (Fifteen) for all sections. All the materials should be got approved by the Executive Engineer before fixing in position as directed
13
-
-
... More
Supplying, fabricating and fixing in position UPVC (Un plasticised polyvinyl choride) windows made of casement / openable windows made of UPVC profile section of size 74mm x 60mm as outer frame having outer wall thickness of 2.30mm (+/-0.2mm) and 3 box multi-chamber hollow construction. The shutter of openable window shall be made of size 74mm x 50mm having outer wall thickness of 2.300mm The shutter has to be provided with suitable UPVC beading for glazing of pinhead glass (singleglass 24mm jx 16mm), duly cut at correct degree & fitted with EPDM weather sealed gaskets. The windows system must have the space to fix the grill in side of the outer frame and which is made of MS 10MM square rod as per your approved design with one coat of red oxide paint. The Window should be got approved by the Executive Engineer before use on the work.
370
-
-
... More
Supply and fixing of UPVC (unplasticised Polyvinyyl Chloride) Louvered ventilaters made of upvc profile section of size 74x60x56mm having outer wall thickness of 2.30mm (+/-0.3mm) with 3 box multi chamber hollow construction and provided with galvanized steel reinforcement at where ever required size of 35x35mm. The shutter of openable window shall be made of size 78x60x40 mm having outher wall
The shutter will be provided with suitable upvc beads of size 34x18mm for glazing for the specified / required glass (single), duly cut at correct degree & fitted with necessary K and O type EPDM weather sealed gaskets. Windows has to be provided with variaty of security device like multi point lock system friction stay and powder coated handles as per the requirement, complaint with relevant specifications. The Ventilator should be got approved by the Executive Engineer before use on the work.
115
-
-
... More
Supplying and Fixing Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like DYNA (or) equivalent (with ISI Monogram)
100
-
-
... More
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
-
-
-
... More
50mm thick slab (using 20mm HBGS jelly)
270
-
-
... More
Providing granolithic floor finish of the 50mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
281
-
-
... More
Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification.
455
-
-
... More
Manufacturing, Supplying and fixing of Steel doors with following specification. MS Angle of size 40 x 40 x 6mm at 3.5 kg/m used for outer frame and MS Angle of size 35 x 35 x 5mm at 2.6 kg/m for the shutter frame. Stiffeners with 32 x 6mm at 1.5 kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18 GCR Sheets of best quality is laid as panel in the shutter frames. 18 x 5mm at 0.70 kg/m MS Flat is welded over the 32 x 6mm at 1.50 kg/m MS Flat on the rear side of the door, sand witching the CR Sheet for rigidity. Additional stiffeners with 18 x 5mm at 0.7 kg/m MS Flats are provided diagonally on the rear side of the shutter. 2 Nos. of hinges in case of single leaf and 4 Nos. of hinges in case of double leaf shutters is provided. 6 Nos. of hold fasts 200mm length spliced at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. one at the top and the other at bottom.
250 x 16 mm size of Two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place and 1 No. of M.S. handle of heavy duty. A tie bar is provided at the bottom of the outer frame to
13
-
-
... More
Supplying and fixing of M.S. grill of approved design for open courtyard, grill, grill work to doors and window openings etc.,using necessary mild steel flats for inner and outer members which should be fixed on edges including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer,dismantling of walls /concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification.
12420
-
-
... More
Painting with Industrial Grade MRF epoxy paint works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
520
-
-
... More
Supplying and fixing vertical blinds of approved premium quality colour and brand fixing in position of vertical blinds with Aluminium alloy head nails of 32mm wide 34mm height with anodised finish of 1.20mm thick control units corner fitter,filt bottom weight with cord weight scotch cort fabric with 100mm width, with complete fittings including labour charges for making and fixing position etc,complete and as directed by the departmental officers.
370
-
-
... More
Providing and fixing 8mm thick fully designed perforated calcium silicate board 2'x2' panel tiled false ceiling (Hilux) including supplying and fixing true horizontal level false ceiling with 24mm prelude grid system Using hot dipped galvanised steel section exposed surface chemically cleaned caping prefinished in backed polyester paint wall angle of size 3000x19 x19mm used in the periphery of the ceiling fixed to the wall,parttion with the help of screws at 600mm c/c. Mainrunner of size 3000x24mm suspended at a 1200mm c/c by using securely fixed to the structural soffit of RCC slab by using 6mm Nylon Rwl plug at every 1200mm(max) and 1200mm long cross tee of size 1200x24mm to interlocked between mainrunner at 600mm c/c(max) to form a grid of size 1200x600mm.600mm long cross tee of size 600x24mm is inserted to form a grid of 600x600mm and finally laying classic lite regular edge tiles of size 600x600x15mm
850
-
-
... More
Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongueand-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge. Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and second aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure.
290
-
-
... More
Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer
1420
-
-
... More
GYPBOARD DOUBLE SKIN PARTITION Providing and fixing of Gypsum Dry wall double skin partition of 75mm thick using SAINT GOBIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thick Gyp board screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywell top coat suitable for Gypsum upto primer level. As per India Gypsum specs. Note: Angle Bead to be used at external angles to get straight line finish & Protection from normal Impacts.
1100
-
-
... More
Supply & fixing of Hi tensile membarane structure parking canopy with complete fixtures. The fabric thickness will be of 900GSM. The post will be of 200mm dia section of thickness 3.50mm. The main truss will be of 80mm dia section.The connecting purlin will be of 80x40 rectangle section of thickness 2.50mm. The foundation bolt will be of 2.5' length. Base plate will be of 16mm thick. Bold & Nut system. Yellow zinc oxide primer Asian enamel paint will be coated on the truss section. Self drilling screws will be used as fixtures. The rate inclusive of necessary civil works etc.,complete directed by the Departmental Officers.
170
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
12716.43
-
-
... More
Plastering and finishing the exposed surface of all RCC items of work with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
13520
-
-
... More
Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levels including the cost of coating, labour charges and other incidental charges etc., complete as directed by the departmental officers.
3700
-
-
... More
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly,etc.,complete complying with standard specifications and as directed by the Departmental Officers.The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before
22540
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
26240
-
-
... More
supplying of manual foldable wheel Chair with fixed armrest and footrest,Cushion seat and back, Black Colour Rexin finish with standard specification and as directed by the departmental officers
6
-
-
... More
Manufacturing,supplying and fixing of stainless steel of U shaped movable grab bar with hinges for accessible toilet using 50 mm dia pipe of 304 grade stainless steel pipe of 1.60 mm thick in required size of 750mm x 110mm.The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete.
12
-
-
... More
Manufacturing,supplying and fixing of stainless steel grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 600mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete.
6
-
-
... More
Manufacturing,supplying and fixing of stainless steel L shaped grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 500mm and 700mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete.
6
-
-
... More
Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications
200
-
-
... More
Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed
50
-
-
... More
Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.
100
-
-
... More
Providing aluminium profile at expansion joint complete complying with standard specifications
570
-
-
... More
Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
300
-
-
... More
Supplying and fixing fine polished cuddapah slab of 20/25 mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
300
-
-
... More
Supplying the Urinary Panel has a 12mm thick High Pressure Laminates (HPL) Compact Board, with a recommended panel width dimensions of 400-500 mm. The size of the UMP is 500 mm (W-Top) X 400 mm (W-Bottom) X 1200 mm (H), with the overall height of 1200 mm size fixing to wall using 3Nos.of suitable chromium plated brackets with CP bolt and nets, washers, cutting to required shape polishing to all the expose and surfaces and edge grinding etc, complete as directed by the dept officers.
12
-
-
... More
Supplying and fixing sanitary napkin destroyer of approved quality of standard size is 310mm x 310mm and the height of 640mm for over all of the machine weight is approximate 25kgs each Nos, with capacity of 10 to 15 napkin at a time for operating of machine is of duel chamber [primary and secondary and the burring chamber is of SS 304 and this sanitary napkin is certified by the NABL Laboratories and it is machine is operated with electrical for 230 v+ / - 10%, 50Hg single phare 5 A, 1.25 KW this sanitary napkin destroyer machine is destroyer is engineered to reduce used sanitary napkins to sterile as in a matter of seconds, it is extremely easy to use and operate wall mountable [ free standing] etc, the rate is inclusive of cost of materials such as rigid pipe with complete accessories and labour charges and transporting charges scaffolding charges etc complete as directed by the departmental officer, the quality of machine is approved by the EE before installed.
3
-
-
... More
Supplying and erecting in position of 1000 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid-1 No.(b) Media 11054 No. Vessel with 20nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP–1 No. (d) Vertical Pump 2-9,2.00 HP/Single Phase–1 No.(e) Membrane 40 x 40 filmtech (or) equilaents/Osmonic (USA)-1 No.and Membrane Pressure Vessel 40x40-1 No& Pressure Gauge-2 Nos.(f)Flow Meter -1 No.20” Filter with Housing-1 No.Low Pressure Switch-1 No., Level Switch-1 No.& Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact
1
-
-
... More
Providing and fixing cooler unit made of Blue star with 40 litres capacity for Hot , cold and normal with PVC body of dispensers and 40 lit. capacity of tank with automatic float switch fixing of dispensor tank with freezer box etc. complete compying with standard specifications
3
-
-
... More
WATER SUPPLY AND SANITARY ARRANGEMENTS
-
-
-
... More
Supplying, laying and jointing the following UPVC pipes-shedule 80 (brand or equivalent) of following diameter of approved quality and best variety of pipes with pressure withstsnding 10 kg/sq.cm and laid properly above ground level to alignment including fixing of required GI specials but excluding cost of such specials, cutting and threading, including fixing to walls with necessary teakwood plugs clamps and screws making holes in the wall or drilling hole in the roof and making good of the distributed portion in the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes to be painted with two coats of good variety and best quality of synthetic enamel paint over coat of red oxide primer etc. complete in all floors complying with standard specification, (The UPVC pipes shall be got approved by the Executive Engineer before use on works.)
-
-
-
... More
20 mm dia UPVC Pipe
560
-
-
... More
25 mm dia UPVC Pipe
380
-
-
... More
32 mm dia UPVC Pipe
250
-
-
... More
40 mm dia UPVC Pipe
401
-
-
... More
50 mm dia UPVC Pipe
900
-
-
... More
65 mm dia UPVC Pipe
240
-
-
... More
Supplying, laying and jointing the following CPVC pipes (brand or equivalent) of following diameter of approved quality and best variety of pipes with pressure withstsnding 10 kg/sq.cm and laid properly above ground level to alignment including fixing of required GI specials but excluding cost of such specials, cutting and threading, including fixing to walls with necessary teakwood plugs clamps and screws making holes in the wall or drilling hole in the roof and making good of the distributed portion in the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. The pipes to be painted with two coats of good variety and best quality of synthetic enamel paint over coat of red oxide primer etc. complete in all floors complying with standard specification, (The UPVC pipes shall be got approved by the Executive Engineer before use on works.)
-
-
-
... More
20 mm dia CPVC Pipe
81
-
-
... More
Supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the UPVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
... More
UPVC Elbow
-
-
-
... More
65mm dia
85
-
-
... More
50mm dia
320
-
-
... More
40 mm dia
240
-
-
... More
32 mm dia
284
-
-
... More
25 mm dia
639
-
-
... More
20 mm dia
639
-
-
... More
UPVC Bend
-
-
-
... More
65mm dia
15
-
-
... More
50mm dia
120
-
-
... More
40 mm dia
120
-
-
... More
32 mm dia
213
-
-
... More
25 mm dia
426
-
-
... More
20 mm dia
426
-
-
... More
UPVC Tee
-
-
-
... More
65mm dia
30
-
-
... More
50mm dia
80
-
-
... More
40 mm dia
120
-
-
... More
32 mm dia
568
-
-
... More
25 mm dia
852
-
-
... More
20 mm dia
1278
-
-
... More
UPVC Coupling
-
-
-
... More
65mm dia
75
-
-
... More
50mm dia
240
-
-
... More
40 mm dia
120
-
-
... More
32 mm dia
426
-
-
... More
25 mm dia
639
-
-
... More
20 mm dia
426
-
-
... More
UPVC Reducer
-
-
-
... More
50 x 40 mm dia
80
-
-
... More
25 x 20 mm dia
213
-
-
... More
40 x 32 mm dia
120
-
-
... More
32 x 25 mm dia
213
-
-
... More
UPVC Reducer Elbow
-
-
-
... More
50 x 40 mm dia
120
-
-
... More
25 x 20 mm dia
213
-
-
... More
40 x 32 mm dia
120
-
-
... More
32 x 25 mm dia
213
-
-
... More
UPVC Reducer Tee
-
-
-
... More
50 x 40 mm dia
80
-
-
... More
25 x 20 mm dia
213
-
-
... More
40 x 32 mm dia
80
-
-
... More
32 x 25 mm dia
213
-
-
... More
UPVC union
-
-
-
... More
50mm dia
40
-
-
... More
40 mm dia
40
-
-
... More
32 mm dia
71
-
-
... More
25 mm dia
75
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
50mm dia
40
-
-
... More
40mm dia
40
-
-
... More
32mm dia
71
-
-
... More
25mm dia
71
-
-
... More
20mm dia
71
-
-
... More
supplying and fixing of pressure reduction valve for UPVC pipe lines . complete complying with standard specifications and should be got approved by the Executive Engineer before use on works
20
-
-
... More
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.
111
-
-
... More
Supplying and fixing position CI Nahani Trap of size 100x75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
100
-
-
... More
Supplying and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (with pedestal/without pedestal) with a pair of cast iron brackets, including cost of 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coats of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
45
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc.,including supplying and fixing 10 litres capacity PVC low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
15
-
-
... More
Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover
Wall Fitting
20
-
-
... More
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting
15
-
-
... More
Supply and fixing in position urinal flat back, back inlet white glazed earthen ware of best approved quality with GI Pipe connection of suitable length, 32mm dia bell mouthed PVC connection, concealed stop valve 5089 and fixing the urinal to the wall in position with necessry TW plugs, clamps, screws, shellac etc., including dismantling masnory if necessary and redoing the same to the original condition, and checked without any leakage complete complying with standard specifications. The urinal should be got approved by the Executive Engineer before use on works.
15
-
-
... More
Supplying and fixing in position best variety and approved quality heavy type 15mm dia tap following type including cost for cutting and threading of the galvanised iron pipes, cotton thread, shellac etc. complete complying with standard specification.
-
-
-
... More
Heavy Duty Long Body Tap
100
-
-
... More
Heavy Duty Short Body Tap
60
-
-
... More
Supplying and fixing in position Indian make Special Type Mirror of size 1000 x 780mm fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).
17
-
-
... More
Supplying and fixing in position Special Type of mirror of approved quality and brand of size 800x600mm Reflection mirror of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).
20
-
-
... More
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The towel rail should be got approved by Executive Engineer before use on works).
20
-
-
... More
Supplying and fixing approved best quality SS Towel Rack 600mm long with Lower Hanger of approved make with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The towel ring should be got approved by Executive Engineer before use on works).
20
-
-
... More
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
20
-
-
... More
Supplying and fixing CP Bottle Trap including cost of all materials, labour etc., complete as directed by the departmental officers.
60
-
-
... More
Supplying and fixing approved best quality brass SS toilet roll holder with flap of approved make with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The toilet holder should be got approved by Executive Engineer before use on works).
22
-
-
... More
Supplying and fixing in position 15mm dia two way bibcock(heavy duty) with Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
50
-
-
... More
Supplying and fixing in position CP Wall Mixture of approved make such as jaquar or equivalent with CP stop cock arrangement of size 15mm dia inlet and outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower Wall Mixture should be got approved by the Executive Engineer before use on works).
20
-
-
... More
Supplying and fixing in position CP Shower arm of 300mm length with Brass Chromium Plated Shower Rose - 100mm dia of approved make such as jaquar or equivalent with CP stop cock arrangement of size 15mm dia inlet and outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower arm should be got approved by the Executive Engineer before use on works).
20
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to be laid below ground level
-
-
-
... More
230 mm dia PVC pipe
480
-
-
... More
160mm dia PVC pipe
970
-
-
... More
110mm dia PVC pipe
330
-
-
... More
75mm dia PVC pipe
980
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
... More
PVC Tee
-
-
-
... More
230 mm dia
65
-
-
... More
160 mm dia
170
-
-
... More
110 mm dia
45
-
-
... More
75 mm dia
170
-
-
... More
PVC Tee with door
-
-
-
... More
230 mm dia
65
-
-
... More
160 mm dia
170
-
-
... More
110 mm dia
36
-
-
... More
75 mm dia
170
-
-
... More
PVC Y
-
-
-
... More
230 mm dia
65
-
-
... More
160 mm dia
170
-
-
... More
110 mm dia
45
-
-
... More
75 mm dia
255
-
-
... More
PVC "Y" with Single Door
-
-
-
... More
230 mm dia
90
-
-
... More
160 mm dia
170
-
-
... More
110 mm dia
60
-
-
... More
75 mm dia
255
-
-
... More
PVC bend
-
-
-
... More
230 mm dia
65
-
-
... More
160 mm dia
170
-
-
... More
110 mm dia
54
-
-
... More
75 mm dia
180
-
-
... More
PVC Elbow
-
-
-
... More
230 mm dia
110
-
-
... More
160 mm dia
340
-
-
... More
110 mm dia
180
-
-
... More
75 mm dia
260
-
-
... More
PVC Elbow with door
-
-
-
... More
230 mm dia
85
-
-
... More
160 mm dia
200
-
-
... More
110 mm dia
75
-
-
... More
75 mm dia
180
-
-
... More
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).
-
-
-
... More
160 mm dia
85
-
-
... More
110 mm dia
54
-
-
... More
75 mm dia
85
-
-
... More
Providing rain water harvesting arrangements by earth work excavation in loose or hard soil to a depth of 90cm and 100cm diameter and filled with 40 mm brick jelly to full depth and RCC well rings of 90 cm dia to a depth of 1.20 m and covering the top with precast slab of 75 mm thick etc complete
5
-
-
... More
Drilling borewells in Chennai District including transportation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sandstone shale pebbles boulders etc, by first taking a pilot bore of 150mm dia and then enlarging to required dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drillng at site shown by the Engineer incharge including construction of mud pit etc., complete as directed. (Drilling 140/150 mm dia pilot bore)
100
-
-
... More
Reaming 140 / 150 mm dia pilot bore to 300mm dia bore etc complete complying with standard specification and as directed by the departmental officers.Upto 60m depth ending below ground level.
100
-
-
... More
Supplying of PVC casing pipes 160mm assembly (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers
-
-
-
... More
Slotted pipe 160 mm Dia
80
-
-
... More
Plain pipe 160mm Dia
80
-
-
... More
Labour charges for inserting casing pipes assembly (with slots or without slots) in the drilled hole including welding the joint etc., complete and supllying and packing the annular space with pebbles of size and quality as approved by the executive engineer.
100
-
-
... More
Charges for developing the bore well with air compressor of 600 CFH capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by the TWD officers and conducting yield test by V notch method.
16
-
-
... More
Supplying of best and approved quality of HDPE pipes of the following size including laying in the borewell and tying with copper wire, it etc. complete complying with standard specification.
-
-
-
... More
40mm Dia
100
-
-
... More
25mm Dia
100
-
-
... More
Supplying and fixing 3 HP Jet Motor with all accessories such as jet, 16 amp main switch and electric starter with ISI mark, Electric main board and giving electric connection with required wire etc. The Motor should be fixed with bolts and nuts in the masonry pedestal of size 450 x 450 x 600 mm using Fly Ash Bricks of 230 x 110 x 70mm size and plastering with cement morter 1:5 (one cement and five sand), 12mm thick etc including testing etc complete complying with standard specification and as directed by the departmental officers..(The Motor and accessories shall be got approved by the Executive Engineer before use on works).
2
-
-
... More
Supplying and erecting multistage submerssible pumpset of 15HP capacity with 65mm delivery pipe suitable for open well / sump driven by 3 phase power supply with necessary tying rope and bed arrangements. The rate inclusive of supply and erecting star-delta starter with suitable underwater cable from starter to motor.
4
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating.The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
... More
160 mm Dia PVC pipe
660
-
-
... More
110mm Dia PVC pipe
34
-
-
... More
Construction of Inspection chamber or manhole of the following size including necessary earth work excavation in all soils to full depth as may be directed with sand filling at bottom of the chamber for 10cm thick, concreting CC 1:5:10 using 40 mm guage HBGs jelly 10 cm thick and side walls 9" thick brick work in cement mortar 1:5 using II class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" filling the size of foundation with excavated earth, plastering with cm 1:3 20m thick for inside and bottom and making necessary benching with brick jelly cement concrete to the required slope and finishing neatly etc., complete.
-
-
-
... More
Inspection Chamber of size 60Cm x 60Cmx 60 Cm
51
-
-
... More
Inspection Chamber of size 75Cm x 75 Cmx 90 Cm
15
-
-
... More
Inspection Chamber of size 90 Cm x 90 Cmx 150 Cm
15
-
-
... More
Inspection Chamber of size 120 Cm x 120 Cmx 210 Cm
10
-
-
... More
Supplying and fixing in position of Steel fibre reinforced cement concrete (SFRC)manhole / inspection chamber cover slab with following frame sizes including necessary labour charges for fixing the frame in position over the cement mortar base and finishing the joints etc. complete as directed.
-
-
-
... More
Size of 60x60cm
51
-
-
... More
Size of 75x75cm
15
-
-
... More
Size of 90x90cm
15
-
-
... More
Size of 120x120cm
10
-
-
... More
Supplying and fixing of PVC mould CI Steps of approved quality including dismantling masonry wherever necessary and redoing the damaged portion to original condition etc., complete complying with standard specification.
55
-
-
... More
Fire Fighting Arrangements
-
-
-
... More
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
6
-
-
... More
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.
12
-
-
... More
Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT
6
-
-
... More
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
6
-
-
... More
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT
6
-
-
... More
Supply, erection, testing and commissioning of following MS „C‟ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table „E‟, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.
-
-
-
... More
150mm dia
60
-
-
... More
100mm dia
100
-
-
... More
80 mm dia
15
-
-
... More
25mm dia
15
-
-
... More
Wrapping and coating anti-corrosive treatment for under ground MS pipe as per standard method of one coat metal primer, one coat Bitumen and tar felt over coating, as directed by the departmental officers.
-
-
-
... More
150 mm dia
25
-
-
... More
Supply & Installation of Gun Metal Ball Valve of size 25mm dia size including necessary Fittings
42
-
-
... More
Supply & Installation of Gun Metal Ball Valve of size 12.5mm dia size including necessary Fittings
4
-
-
... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water. To be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 and as directed by the department officers.
-
-
-
... More
100mm dia
3
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT
3
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
80
-
-
... More
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.100mm
255
-
-
... More
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table „E‟, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
... More
150mm dia.
3
-
-
... More
100mm dia
5
-
-
... More
Supply & Installation of in position the sign board of "EXIT " with arrow to be placed at walking pathways by fixing on walls to direct occupants to outside the buliding in an emergency. The Exit sign board will be autoglow photoluminiscent type which will glow at dark.(Single Side indication)
50
-
-
... More
Supply & Installation of Fire Escape Route Plan Laminated Board Auto Glow Print to be placed at each floor by fixing on walls to direct occupants to outside the buliding in an emergency. The Fire Escape Route Plan will be autoglow photoluminiscent type which will glow at dark.(Single Side indication)
9
-
-
... More
Sub-Total of Civil Works
-
-
-
... More
Electrical works
-
-
-
... More
Wiring with 2x1.5Sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with Modular Metal Box and Cover with Modular Cover Plate with 6A Modular Switch with suitable colour for concealed PVC light point/fan point ( For electronic regulator)(5Pts/coil) (Legrand(Myrius)/MK Honeywell) (DATA-1)
1012
-
-
... More
Wiring with 2x1.5Sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with Modular Metal Box and Cover with Modular Cover Plate with 6A Modular Switch with suitable colour for concealed PVC light point/fan point (For electronic regulator)(6Pts/coil) (Legrand(Myrius)/MK Honeywell) (DATA-2)
205
-
-
... More
Wiring with 3x1.5sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in Suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories in flush with wall and with Modular Metal box and 6A Modular switch (two way) with Modular Front cover Plates and making good of the concealed portion with suitable colour for concealed staircase light point. (Legrand(Myrius/MK Honeywell) (DATA-3)
12
-
-
... More
Supply and Fixing of 1 No.22W Direct LEO fitting with 1 No 20W LED Tube on Ceiling with complete set TW round block with PVC unsheathed copper leads from terminals to the Fittings. (Havells make/philips) (DATA- 4)
64
-
-
... More
Supply and fixing of 1 No.2x22W Direct LED Fitting with 2 Nos 20W Direct LED Tube with 0.5Mtr Conduit type down rod Complete Set on ceiling with TW Round Clock with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Equ)(DATA-5)
194
-
-
... More
Supply and Fixing of 24W 1x1 LED round on false ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips) (DATA-6)
428
-
-
... More
Supply and Fixing of 2’x2' 4 2WLED on Gyp board false ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips) (DATA-7)
102
-
-
... More
Supply and Fixing of 40W LED COB type recessed downlight with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips) (DATA-8)
36
-
-
... More
Supply and Fixing of 20S LED COB Surface Downlight with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips) (DATA-9)
19
-
-
... More
Supply and Fixing of 8W LED Spot light with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Philips/Klite) (DATA-10)
102
-
-
... More
Supply and fixing of Bulk Head 9W LED 5 Star rate set with suitable for CFL/LED Bulbs with necessary connections. (Philips/Equ) (DATA-11)
40
-
-
... More
Supply and fixing of 1200 mm (48") AC High speed ceiling fan complete with 2M regulator with 0.5Mtr 300mm down rod with PVC unsheathed copper leads from terminals to the Fittings clamp. (Crompton)(DATA-12)
371
-
-
... More
Supply and fixing of 375 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall.
(Almonard/Equ) (SD-114)
55
-
-
... More
Supply & Fixing of Havells make Rhytum Multi tune call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable Modular Metal box with Modular 6A Modular push switch. (DATA-13)
17
-
-
... More
Supply and fixing of 3 Module Modular Metal Box With Front Plate With 1 No 6A Modular Switch, 1 No 6A Modular Socket in flush with wall with necessary earth connection. (Legrand(Myrius)/MK) (DATA-14)
41
-
-
... More
Supply and fixing of 4 Module Modular PVC Surface Box With Front Plate With 2 Nos 6A Modular Switch, 1 No 6A Modular Socket open on wall with necessary earth connection. (Legrand(Myrius)/MK ) (DATA-15)
12
-
-
... More
Supply and fixing of 6 Module Modular Metal Box With Front Plate With 2Nos 6A Modular Switch, 2 Nos 6A Modular Socketin flush with wall with necessary earth connection. (Legrand(Myrius)/MK) (DATA-16)
436
-
-
... More
Supply and fixing of 6 Module Metal Box With Front Plate With 1 No 16A Modular indicator Switch & 6A Modular Switch ,1 No 16A Modular Socket, 1 No 6A Modular Socket in flush with wall with necessary earth connection. (Legrand(Myrius)/MK ) (DATA-17)
205
-
-
... More
Supply and Fixing of 25A DP Pole MCB and 25A 3 Pin Socket and 25A 3 Pin Top in flush with suitable 2 Nos 2M Metal Box and Cover Plates with Suitable necessary earth connection. (Legrand (Myrius)/MK) (DATA-18)
75
-
-
... More
Supply and Fixing of 63A FP Pole MCB with suitable FP Sheet Steel Enclosure Box in flush with wall with Suitable necessary earth connection. (Legrand/Hager) (DATA-19)
6
-
-
... More
Supply and run of 3 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour. (DATA-20)
80
-
-
... More
Supply and run of 3 of 2.5sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection making good of the concealed portion with suitable colour. (DATA-21)
1850
-
-
... More
Supply and run of 3 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection making good of the concealed portion with suitable colour. (DATA-22)
2600
-
-
... More
Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (SD-59)
480
-
-
... More
Supply and run of 4 of 6 sq.mm. [84/ 0.3] PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-63)
200
-
-
... More
Supply and run of 4 of 10 sq.mm.(140/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWGTC wire and making good of the concealed portion with suitable colour. (DATA-23)
500
-
-
... More
Supply and run of 4 of 16 sq.mm.(101/0.45) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWGTC wire and making good of the concealed portion with suitable colour. (DATA-24)
295
-
-
... More
Supply and fixing of 12way single pole and neutral MCB DB IP 42 Protection Metal Door Cover distribution board with 1 No 32A DPMCB as incoming and 10 Nos 6Amps to 32Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISi mark. (Hager/Legrand make) (DATA-25)
38
-
-
... More
Supply and fixing of Three phase Seven Segment type 4 way 63A distribution board with Metal Door cover Code IP42 Protection, with 63A 4 pole ELCB 30 mA· as incoming and Sub incomers 3 Nos 40A DP ELCB and 12Nos 6-32A SPMCB as Outgoing on Wall with earth connection only. The MCB-DB and MCB's should be with ISI mark. (Hager / legrand) (DATA-26)
6
-
-
... More
Supply and fixing of Three phase Seven Segment type 6 way 63A distribution board with Metal Door cover Code IP42 Protection, with 63A 4 pole ELCB 30 mA as incoming and Sub incomers 3 Nos 40A DP ELCB and 18Nos 6-32A SPMCB as_Outgoing on Wall with earth connection only. The MCB DB and MCB's should be with ISI mark. (Hager/legrand) (DATA-27)
12
-
-
... More
Supply and fixing of HLF Series Three phase Type Vertical type 6 way 125A MCCB distribution board with Metal Door cover Code IP43 Protection, with 125A 4 pole MCCB as incoming and 3Nos 63A TP MCB, 9 Nos 6-32A SPMCB as Outgoing on Wall with earth connection only. The MCCB DB, MCCB and MCB's should be with ISI mark. (Hager/legrand) (DATA-28)
3
-
-
... More
Supply and fixing of HLF Series Three phase Type Vertical type 8 way 125A MCCB distribution board with Metal Door cover Code IP43 Protection, with 125A 4 pole MCCB 25KA as incoming and 4 Nos 63A TPMCB and 12 Nos 6-32A SPMCB as Outgoing on Wall with Cable entry boxes and necessary angle iron frame work with earth connection only. The MCCB DB and MCB's should be with ISI mark. (Hager /Legrand make) (DATA-29)
3
-
-
... More
Supply and fixing of HLF Series Three phase Type Vertical type 6 way 125A MCCB distribution board with Metal Door cover Code IP43 Protection, with 125A 4 pole MCCB 25KA as incoming and 4 Nos 63A TPMCB and 6 Nos 6-32A SPMCB as Outgoing on Wall with Cable entry boxes and necessary angle iron frame work with earth connection only. The MCCB DB and MCB's should be with ISI mark. (Hager /Legrand make) (DATA-30)
3
-
-
... More
Main Essential Lighting & Power Panel : Supply and fixing of 250A capacity dust and proof cubical panel board of size 6' ft x 5' ft x 2' ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in 1.5 specifications.
Incomer:
1)250A 4pole MCCB-l No Outgoing:
1)63A TPN MCCB-2 No 2) 125A TPN MCCB-4Nos
A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-250A) Ammeter with C.T and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases. The incoming 250A switches should be connected to the bus with same size of 1 x 1/4 fixed copper flat and 250A for 1x1/4 copper flat, 63A & 125A switches should be connected to the bus by 1x1/8 fixed copper flat. The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete. The cable size, capacity of switch and location should be marked with white paint ) (L&T/ Simens) (Data 31)
4
-
-
... More
Supply and clamping of 3 1/2x25 sq.mm PVC LTUG armoured LTUG cable on post or on wall MS Clamps. (SD-222)
50
-
-
... More
Supply and clamping of 3 1/2 x70 sq.mm PVC LTUG armoured LTUG cable on post or on wall MS Clamps. (SD-225)
90
-
-
... More
Supply and fixing of brass cable gland for 3 ½ x 25 Sqmm PVC armoured LTUG cable with earth connection. (S.D-186).
3
-
-
... More
Supply and providing cable end termination of 3 1/2x 25 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. {S.D- 235)
3
-
-
... More
Supply and fixing of brass cable gland for 3 1/2x 70 Sqmm PVC armoured LTUG cable with earth connection. (S.D-189)
6
-
-
... More
Supply and providing cable end termination of 31/2x 70 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. (S.D- 238)
6
-
-
... More
Supply and laying of 2 runs of 3 ½ x 185 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meter putting 0.15mt layer of sand and covering the cable completely with 6 inch Heavy duty 120/103.mm Dura Duct PVC pipe and sand and refilling the earth to make good. (DATA-32)
150
-
-
... More
Supply and clamping of 2 runs of 3 1/2 x 185 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (S.D-229)
50
-
-
... More
Supply and fixing of brass cable gland for 3 1/2 x 185sqmm PVC armoured LTUG cable with earth connection. (SD-193)
16
-
-
... More
Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (SD-242)
16
-
-
... More
Supply and fixing of K Lite make 6Mtr Street post with),100W LED fittings and necessary construction of concrete Bed arrangements with Bolt & Nuts arrangements with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour. (Make: K Lite only) (DATA-33)
30
-
-
... More
Supply and laying of 4 x 16 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meter putting 0.15mt layer of sand and covering the cable completely with Dura Duct Hose 50/38 mm sand and refilling the earth to make good. (DATA-34)
400
-
-
... More
Supply and clamping of 4 x 16 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps. (SD-221)
20
-
-
... More
Supply and fixing of the 4x16/25Sqmm sqmm brass cable gland for the 4x16 sqmm PVC Armoured LTUG cable with earth connection. (SD-185)
66
-
-
... More
Supply and providing cable end termination of 4x16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (DATA-35)
66
-
-
... More
supply ,Erection,Testing and commissioning of 2.0TR split type Air conditioner with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase. (Carrier/Equ)
47
-
-
... More
Supply and fixing of 5KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt,
50 Hz, AC power supply (Make: V -Guard)/ Equivalent.
47
-
-
... More
Supply and Installation of Extra copper pipe with necessary insulation, Cabling & Drain arrangement etc…
235
-
-
... More
Supply and fixing of angle iron stand for outdoor Unit
47
-
-
... More
Design, Supply Installation, testing and commissioning of 8.5 TR nominal capacity ceiling suspended Ductable Air conditioner with the Following components.a)8.5 TR capacity ceiling suspended Ductable Air Conditioner high tech,low height, low noise level indoor unitwith fin and tube type cooling coil, Detachable type drier provided inrefrigerant circuit to reduce moisturecontent multi stage type distributorfor feeding equal quantities of the Refrigerant mixture to all the section ofthe coil, with required valves, directly coupled blower to reduce troubles andwear & tear compared to belt drive Blower. Thermostatic expansion valve arrangement, lift and pull type aluminium framed durable, washable air filter, Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP/LP safety cut sensor type to improve Reliability of compressor. Type QTY- Ceiling Suspended
Blower QTY - 1 Nos
Motor Power - 415V /3Ph/50HZ Air flow -3400 CFM
3
-
-
... More
B)8.5 TR capacity suitable for ceiling suspended Ductable Air conditioner high tech Outdoor unit with power saving high efficiency sturdy and rugged 1 No of scroll compressor each with inbuilt internal thermal protector, internal pressure relief valve, Auto reset type HP/LP safety cut sensor out to improve reliability of compressor and condenser shall be made of super slithigh efficient aluminium fins mechanically bonded to copper tubes condenser 'L' type coil to be rigidly fixed with unit frame with fasteners imported condenser fan & fan blades to be statically and dynamically balanced to reduce noise and Vibration. The fans are direct driven3phase motor with protection. Condensing temperature 130'f for the system operations.
Refrigerant ComPressor - Scroll
No of Compressor- 1No
Refrigerant - R22
Power supply-415V/3ph/50HZ
No of Fan-1Nos
Types of Mounting-Rubber Mount with sleeve
-
-
-
... More
Supply, Installation, Testing and Balancing of Fabricated Rectangular Galvanised Steel Sheet Ducting made of Lock-forming quality with GI full threaded rods and GI slotted channel support/hangers with bolts, nuts, neoprene fire retardant gaskets and sealed with silicon sealant, elbows, turning vanes, slip on flanges, in accordance with the approved shop drawing s and specifications, sizes and quantities as below :
-
-
-
... More
24 G-0.63 mm
270
-
-
... More
22 G-0.80 mm
110
-
-
... More
20 gauge GSS
220
-
-
... More
Supply and Providing Thermal Insulation of 9mm thick -XLPE with aluminium foil./ Nitrile Rubber insulation
290
-
-
... More
Supply and providing acoustic lining for initial portion of ducting with 10mm thick XLPE insulation.
90
-
-
... More
Supply, fabrication and fixing of Volume control dampers individually across the duct
28
-
-
... More
Supply and fixing of powder coated Extruded aluminium supply air grilles/diffuser with MS volume control damper for supply.
75
-
-
... More
Supply and fixing of 1 1/2 inch PVC water drain pipe line on wall with suitable Clamp as required.
140
-
-
... More
Supply, fabrication and fixing of suitable angle support frame for ceiling mounted the Indoor Units
6
-
-
... More
Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc
12
-
-
... More
Supply and filling of R-22 Refrigerant Gas.
50
-
-
... More
Supply and fixing of Copper Refrigerant Piping of 7/8" dia
110
-
-
... More
Supply, fabrication and fixing of MS Channel for Mounting the Air conditioning Oudoor Unit
3
-
-
... More
Supply and providing of 10 sq.mm. copper flexible single cable
80
-
-
... More
Supply and providing of 1.5 sq.mm. Copper flexible signal cable
80
-
-
... More
Supply, Erection, Testing, Commissioning and Handing over of 1No, 13 Persons Passenger Lift as per following technical specifications including all taxes and duties Technical Specifications: 1. Location :Highways dept, Chennai-32. 2. No of Lift: 1 no 3. Type of Lift: Gearless without Machine Room. 4. Capacity of Lift :13 Persons. (884Kgs) 5. Speed: 1.00 mtr / Sec 6. Type of Drive: Microprocessor based specific variable voltage variable frequency V3F with enhanced ride comfort and near zero leveling
functions. VVVF Drive. 7. No of floor: Ground + 2 floors. 8. Total Travel: 9.6 mtrs approximate 9. Leveling Accuracy: High level accuracy with smooth & Jerk free stopping. 10. Construction of car: Special car made of Stainless Steel hairline finish No.4 hair line finish & panels with LED lighting 11. Position of Machine: Directly above the lift well shaft gearless. 12 No. of Landing Entrance: one in front-5 Nos only
2
-
-
... More
13. No. of Car Entrance: One in front only. 14. Car Entrance Door: Centre opening automatic power door with stainless steel No.4 Hair Line finish with view panel operated centre opening SS cars. 15. Landing Entrance Door: Centre opening automatic power door with stainless steel No.4 Hair Line finish with view panel Power operated V3F Drive Centre opening stainless steel No.4 Hair line finish with view panel . door with provision for emergency key opening at all landing. 16. Car size: 1350mm widex 1300mm deep (part 1) 17. Car clear Opening: 800mm x2000mm (as per IS 14665 (part 1) -2000 (wide) x 2000mm Height. (as per IS 14665 (Part-I)- 2000). 18. Lift well : 2100mm(width)x1680mm (depth) available size 19 lift pit depth available - 1600mm
-
-
-
... More
20. Power supply : 415V,400/440v, 3 phase, 50 cy / Sec A.C supply for power and 230V, 50 Hz single phase AC supply for light. 21. Control: Micro processor Computer based - simplex collective full collective logic system with or without attendant mode. 22. Car fittings: lndirect fluorescent light & Fan. 23. Lift Well: RCC construction with Brick masonry existing. 24. Lift Machine Room: As per standard specification 1800mm (Width) x 1500mm(depth) (as per IS 14665 (Part-5) - 2000) 25. Induction: Up / Down Digital Direction scroll type and position indicator for all landing and in car. 26. Emergency Alarm Bell_: Battery Operated Alarm Bell to be provided with automatic charging device. 27. Emergency Light: Battery operated Light to be provided with automatic charging device.
28. Fireman's switch: To be provided at ground floor. 29. Minor Builders work to be provided by lift contractor.
-
-
-
... More
30. Scaffolding: To be provided by lift Contractor. 31. Stainless Steel still angles and facia Plates: To be provided by lift contractor. 32. Steel for lift Machinery: To be Provided by lift contractor. 33.Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarantee period of one year 34. Provision of 1+3 EPABX intercom with phone to be provided at the following places vide 1. Lift Head Room 2. Reception Room and 3. Inside the Lift by lift contractor. 35.Lift License: Preparation of drawing payment of charges to CEIG and insurance policy if any and obtaining CEIG safety certificate and lift license as per lift act should be done by the lift contractor. 36. Automatic rescue device: To facilitate the landing of the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger inverter under voltage protection system etc
-
-
-
... More
Supply and fixing of perforated type cable rack sytem made out of Hot dipped Galvazined Cable tray ladder type 450x75x2mm with 50x6mm angle support on wall/ceiling with necessary downrods. (Quotation Enclosed)
30
-
-
... More
Supply, installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24
1 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (SOR rate)
1
-
-
... More
Supply & installation of Repeater panel with battery backup for 24 hours normal operation with LCD screen.
1
-
-
... More
Supply and installation of analogue addressable smoke detector photoelectric type with base and led to operate on 24 V DC supply. Make: MORLEY, FYRESYS
140
-
-
... More
Supply, installation, testing and commissioning of Electronic Hooter/ Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel/ Equivalent). (SOR rate)
8
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel/ Equivalent). (SOR rate)
3
-
-
... More
Supply & Installation of Isolator modules
6
-
-
... More
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling/ wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (SOR rate)
1650
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST/ EQUIVALENT) SOR rate
2
-
-
... More
Supply & installation of 4 Nos. Fire Buckets made out of 40X40X6mm MS Angle. (SOR rate)
1
-
-
... More
Four panel HT VCB:- Design, manufacturing supply, erection, testing, commissioning and handling over of 11 KV 25 KA HT Four panel Outdoor type Vacuum Circuit Breaker Switch Board Comprising one number 630A. 500MVA VCB as incoming and 3Nos. 630A 500MVA VCB as outgoing panels for outdoor installation each panel comprising. 1) Draw out type 11 KV 500MVA 630A Horizontal Draw out/ Horizontal Isolation Vacuum Circuit Breaker operated with Spring charged mechanism. Anti Pumping Device, 110V DC shunt Trip and closing Coils (DC source of supply to be derived from a Power Pack suitable for 3 Tripping and Two closing operation counter, 4 No. + 4NC spare Aux. contact for customer use, Automatic safety shutter, Mechanical Close/ Trip knob, Mechanical ON/OFF indication, Operating Handle, 110V AC - 110V DC Power Pack etc. (Incoming 1 No. Outgoing 2Nos.) 2) 11KV /Root 3/110V/Root 3 - Three Phase, 3 Limb 200V A Class 1 Resin Cast Draw Out type Potential transformers complete with HT and LT HRC fuses. (incoming - 1 No.) 3) Current Transformers of 120 - 50/5-5 Amps. Dual Core (Core 1- 15 VA class 1 for metering and core 2 - 15 VA SP 10 for Protection) Incoming 3 Nos, Current Transformers of 60/5-5 Amps Dual Core (Core 1-15VA Class 1 for Metering and Core 2 - 15 VA 5P 10 for protection) (Outgoing 3 Nos)
1
-
-
... More
4) Meters : Digital Ammeter with Selector Switch (Incoming 1 No. Outgoing 3Nos Digital Voltmeter with Selector Switch (incoming 1 No.) Digital Trivector of L&T / Secure make (incoming 1 No.) Digital power Factor meter (Incoming 1 No.) Digital Frequency Meter (Incoming 1 No) 5) Protection : TP ND IDMT 2 OC + 1 EF R with Highest inst. Elements similar like Mega win type MCDG 61. (Incoming 1 No) 6) TP ND IDMT 2 OC + 1 EF Relay similar like Mega win type MCDG31 Master trip Replay Mega win MVAJH 13 (Incoming 1 No. Outgoing 3 No) 7) Breaker ON/OFF/Auto Trip/Healthy Trip/Spring charged Indication lamp LED type (incoming 5 Nos. Outgoing 5 Nos.)8) Phase Indicating Lamps R,Y and B (Incoming 3 Nos)9) Control Wiring 10) 800Amps Aluminum Bus Bar PVC sleeved and required panel copper Earthling. 11) Control Switch TNC (Incoming 1 No. Outgoing 3 No.) 12) Trip Circuit Healthy Push Button (incoming 1 No. Outgoing 3 No.) 13) Common for Switch gear, MCB's for AC DC Control, Heater ON/OFF Switch with space Heater and thermostat single phase switch socket, cubicle illumination lamp, Disconnecting type terminal Block etc. 14) MS sheet enclosure for outdoor Installation Powder Coated with paint shade siemens Grey, paint finish Provision through Bottom entry to receive Incoming and Out going cable excluding cable glands and cable
-
-
-
... More
Three panel HT VCB:- Design, manufacturing supply, erection, testing, commissioning and handling over of 11 KV 25 KA HT Three panel Outdoor type Vacuum Circuit Breaker Switch Board Comprising one number 630A 500MVA VCB as incoming and 2Nos. 630A 500MVA VCB as outgoing panels for indoor installation each panel comprising. 1) Draw out type 11KV 500MVA 630A Horizontal Draw out/ Horizontal Isolation Vacuum Circuit Breaker operated with Spring charged mechanism. Anti Pumping Device,ll0V DC shunt Trip and closing Coils (DC source of supply to be derived from a Power Pack suitable for 3 Tripping and Two closing operation counter, 4 NO+ 4NC spare Aux. contact for customer use, Automatic safety shutter, Mechanical Close / Trip knob, Mechanical ON/OFF indication, Operating Handle, 110V AC - 110V DC Power Pack etc. {Incoming 1 No. Outgoing 2Nos.) 2) 11KV /Root 3/110V/Root 3 - Three Phase, 3 Limb 200 VA Class 1 Resin Cast Draw Out type Potential transformers complete with HT and LT HRC fuses. {Incoming - 1 No.) 3} Current Transformers of 120 - 50/5-5 Amps. Dual Core (Core 1 - 15 VA class 1 for metering and core 2 - 15 VA 5P 10 for Protection) Incoming 3 Nos, Current Transformers of 60/5-5 Amps Dual Core (Core 1-15VA Class 1 for Metering and Core 2 - 15VA 5P 10 for Protection) (Outgoing 2Nos) 4) Meters : Digital Ammeter with Selector Switch {Incoming 1 No. Outgoing 3Nos Digital Voltmeter with Selector
Switch (incoming 1 No.\ Digital Trivector of L&T / Secure make incoming Digital Frequency Meter (Incoming 1 No)
1
-
-
... More
5) protection: TPND-IDMT2 OC + 1 EFR with highest INSD.Element similar like Megawin type MCDG 61 (Incoming - 1No) 6) TP ND IDMT 2 OC + 1 EF Relay similar like Megawin type MCDG31 Master trip Replay Mega win MVAJH 13 (Incoming 1 No. Outgoing 3 No) 7) Breaker ON/OFF/Auto Trip/Healthy Trip/Spring charged Indication lamp LED type {Incoming 5 Nos. Outgoing 5 Nos.8) Phase Indicating Lamps R,Y and B {Incoming 3 Nos) 9) Control Wiring 10) 800Amps Aluminum Bus Bar PVC sleeved and required panel copper Earthling. 11) Control Switch TNC {Incoming 1 No. Outgoing 3 No.12) Trip Circuit Healthy Push Button (Incoming 1 No. Outgoing 3 No.) 13) Common for Switch gear, MCB's for AC DC Control, Heater ON/OFF Switch with space Heater and thermostat single phase switch socket, cubicle illumination lamp, Disconnecting type terminal Block etc. 14) MS sheet enclosure for outdoor Installation Powder Coated with paint shade Siemens Grey, paint finish Provision through Bottom entry to receive Incoming and Out going cable excluding cable glands and cable termination kit. (Make: system control / Mega win) (DATA-37)
-
-
-
... More
Supply and laying of 11KV 3 Core 300 Sqmm XLPE UG cable in a trench to be excavated at a depth of 1.0 mtr. Putting 0.15 mtr. Layers of sand covering the HTUG cable completely with cement concrete RCC cable turf and refilling the earth to make good. (DATA-38). from Existing RMG to - Four panel HTVCB & Four panel HTVCB to Three Panel HTVCB
150
-
-
... More
Supply and clamping at 11KV 3 core 300 sq.mm XLPE UG cable on wall with M.S. special clamps. (DATA-39) from RMG to Four Panel HTVCB &Four panel HTVCB to Three Panel VCB
20
-
-
... More
Supply and providing cable end termination suitable for llKV 3 core 300 sq.mm XLPE HTUG cable with necessary indoor type heat/ cold shrinkable joint kit and accessories. Make: RayChem / M.Seal. (RMG-3Nos, Four panel HTVCB-lNo) (DATA-40) from RMG -1, Four Panel HTVCB - 2 & Three Panel HTVCB -lNo.
4
-
-
... More
Supply and laying of llKV 3 Core 185 Sqmm XLPEUG cable in a trench to be excavated at a depth of 1.0 mtr. Putting 0.15 mtr. Layers of sand covering the HTUG cable completely with cement concrete RCC cable turf and refilling the earth to make good. (DATA-41) from Three Panel HTVCB to 250KVA Transformer 1 & 2
50
-
-
... More
Supply and providing cable end termination suitable for 11 KV 3 core 185 sq.mm XLPE HTUG cable with necessary indoor type heat/ cold shrinkable
joint kit and accessories Make: RayChem / M.Seal. (3 panel HTVCB-2Nos & 25OKVA Tr. 1&2 - 2Nos) ( DATA-42)
4
-
-
... More
Supply, Erection, Testing and Commissioning of 250 KVA,11KV/0.433V Dyn 11 ,ONAN, Outdoor Type, double wound, Energy Efficient Transformer with OFF Circuit type. distribution transformer confirming to relevant IS.1180 Level-2 and fitted with the following.
1. Rating &connection diagram plate
2. Earthling terminal
3. Lihing lugs for whole Transformer
4. Cover lifting lugs
5.0il level gauge-plain with level marking
6. Bottom filter cum drain valve with plug
7. Top filter valve with plug
8. pocket for Thermometer
9. oil Conservator with drain plug
11. oil filling point with cap on the conservator
12. Air release plug
13. Silicagel breather 13.Monogram plate 14. Explosion vent with diaphragm
15. Transformer oil
16. Under base channel with skids
17. Oil temperature indicator with A/T Contacts
18. Winding temperature indicator with A/T Contacts
2
-
-
... More
19. Marshaling box 20.Bi-directional rollers.
21.Buchholz relay with A/T Contacts
22.DetachableRadiators. 23.Off circuit tap switch 24.Conservator shut off valve
25. Neutral CT Special accessories
The transformer should be supplied with first filling of oil Terminal arrangement:- HV-Cable box, LV-Flange to suit bus duct. All removable covers shall be provided with weather proof hot oil resistant, resistance gaskets, to prevent leakage of water in to core, and oil from the tank with Transformer plinth construction of 250KVA as per IS 1180
(Make indotech/CRFL/ROWSON) (DATA 43)
-
-
-
... More
Supply and laying of 2 runs of 3 ½ x240 sqmm PVC armored LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with Dura Duct Hose 120/103.mm and refilling the earth to make good. (DATA-44) 1)From 2 Nos 250KVA Transformer to 400A LT Enclosure 2 nos and 800A MV Panel
90
-
-
... More
Supply and clamping of 2 runs of 3 1/2 x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-230*2) (1515*2=3030)
1) From 2 Nos 250KVA Transformer to 400A LT Enclosure 2 nos and 800A MV Panel
20
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC LTUG aluminum armoured cable with earth connection. {SD-194)
16
-
-
... More
Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminum armoured cable with necessary aluminum cable sockets by crimping etc with electrical connection complete. (DATA-45)
16
-
-
... More
Design, Supply, erection, testing and Commissioning of 1 No. Outdoor Type ACB Kiosk for Transformer Incomer comprising of 1 No. of 400 Amps 50 KA LTAir Circuit Breaker with necessary Busbar provision for incomer and outgoing Cable, dust and vermin proof and accommodating the following ACB as Incomer unit with the following items of work complete to satisfy the latest IE rules and CEIG guidelines .ACB:
1)Supply and fixing of 1 No. 400 A 4 pole 433V LT ACB confirming to IS 13947-2 IEC 60947-2 with suitable capacity and breaking capacity of draw out 50 KA breaking capacity with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with Microprocessor Based SR 18 G relay, over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mold base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE rules in force with inter connection and terminations as required in specification. (DATA-46)
2
-
-
... More
MV PANEL BOARD:- Design, Supply, erection, testing and commissioning of 800A floor mounted MV cubical panel board bus bar chamber dust and vermin proof and accommodating the following ACB's & MCCB's 2
Nos.630A ACB as Incomer (400A is Setting) units with the following items of work complete to satisfy the latest IS rules and CEIG guidelines. Supply
and fixing of suitable size bus bar chamber made up of 16 SWG MS sheet steel with 4 Nos ie R,Y,B,N. 2" X 1/2"(50mm x 12mm) tinned copper bus bar for 3 phases and neutral and 2 Nos. of earthling bus of size 2"X ¼ (2 x 50mm x6mm) tinned copper bus on suitable bus bar insulator (Epoxy insulator)With maximum creep age distance and supported on MS Base
channel frame work of size 4"X2"X¼-1Set(100mm x50mm x6mm) Incoming :1)Supply and fixing of 2 Nos. 630A basic rating 4 pole 433V LT ACB confirming to IS 13947 - 2 IEC 60947 - 2 for higher breaking
capacities of 50KA at 690V AC with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with micro processor SR 18 G relay, over current trip device adjustable to LTD, STD and release for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate
mould base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE
1
-
-
... More
rules inforce with interconnection and terminations as required in specification.
BUS COUPLER:-
Supply and fixing of 1 No 800A basic rating 4 pole 433 V LT ACB incoming to IS-13947-21EC60947-690VAC(catno.ST35567 4Pole 75KA)with all accessories for standard horizontal type ACB equipped with micro processor based SR18G.
Outgoing:
1) Supply and fixing of 400A 3 Pole MCCB with spreader link and Extended Rotary handle-4 Nos
-
-
-
... More
Inter connecting the all LT ACB's and MCCBs to two bus bar with suitable insulated tinned copper flats and painting of phases and neutral indication. Double Earth connection of the MCCBs and ACB's to earth bus using suitable tinned copper flats by 2 runs of 1" X 1/4" Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments with in the cubicle by CEIG rules with, 2 sets, of supply and fixing Electronic Trivector EC, 300P class 0.5 Base mounting L&T or equivalent.(Make-Model. ER300P class 0.5) Supply and fixing of danger board with Siemens grey powder coating with super scribing the names
of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T/Siemens/ABB) (DATA-47)
-
-
-
... More
Supply and erection of 100 KVAR 415/440Volts 50Hz 3 Ph automatic power factor correction panel, 18 stage, (at 0.95 lag), made up of powder coated, 14/16 SWG CRCA sheet steel enclosure with 11/2" x 111/2" x 1/2" Al Frame work with RCC concreting foundation and bolted to masonry pedestal with 125A TPN MCCB as incoming (L&T/Siemens/C&S) with Delta Connected capacitors (BCH/EPCOS) MOO Type operating in multiple stage with 3 current and Voltage Transducers (CVT) at the phases simultaneously to activate the desired power factor switching time between steps 120 seconds, switching off time in case of fault 3 seconds with a LCD display to show the following Parameters.
a. Vr - R phase Line Voltage
b. Vy - Y phase Line Voltage
c. Vb - B phase Line Voltage
d. Ir - R phase Line current
e. ly- Y phase line current
f. lb - B phase Line Current
g. KW - Present Kilo Watts
h. RKVA - Present KVAR Demand
i. KVA- Present KVA
j. PF- Present Power Factor
k. Number of Capacitor bank ON/OFF
2
-
-
... More
I. Provision to indicate the imbalanced load m. Provision to indicate the change in phase Sequence
n. The APFC Panel Should also have built in protection for current imbalance. For high Voltage/Low Voltage cut off, single phase Preventer, provision for inductor coil to cater the in-rush currents, line surges, Current Limiters, Current Sensor, etc., with connection complete and as per the relevant IE Rules. Eight Stages of Automatic Power Factor control panel with necessary connection. Make. (L&T /or equivalent (DATA-48
-
-
-
... More
SUB-STATION EQUIPMENTS:- Supply and Erecting of safety accessories. SR.XIII PART "M" 8 Item (a) to (i). (SOR RATE)
-
-
-
... More
Supply, fixing, testing and commissioning of AC Chargeable emergency lamp 2 x 11 W PL lamp with all connected accessories
1
-
-
... More
Supply and installation of 2.5mm thick Rubber Mat with ISI suitable for 1.1KV installation confirming to IS 15652 (5Nos= 1set)
2
-
-
... More
Supply and Providing approved make First aid box complete with all first aid medicines
1
-
-
... More
Supply and providing shock treatment chart fixed in glass frame (Tamil and English)
1
-
-
... More
Supply and fixing of the 4nos fire buckets stand suitable for 4 nos fire buckets made out of 40x40x6mm MS angle
1
-
-
... More
Supply of hand gloves 11 KV grade
1
-
-
... More
Supply and installation of Danger Board as required by the electrical authorities
6
-
-
... More
Supply and erection of Fire extinguisher Co2, 4.5 Kg confirming to TAC norms
2
-
-
... More
Earth Discharge Rod
1
-
-
... More
Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ Greaves/Equivalent)
1. Dry type Air cleaner
2. Expansion bellow
3. Radiator, Radiator fan and mounting
4. Air to air charge cooler
1
-
-
... More
ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage, oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator.
SAFETY SYSTEM OF ENGINE :- The Engine shall trip for the following conditions with visual alarm device
1. Low lubricating oil pressure
2. High Water temperature 3. Vee-belt failure and over speed
4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.
2. ALTERNATOR: Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part- II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivalents.) 3.ACOUSTICENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven - tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 OBA average or as per CPCB norms. Surface treatment - Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and phosphating. The canopies are passed through seven - tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature .No grouting required on the ground, only a level surface capable of with standing the DG weight .Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.
-
-
-
... More
4. FUEL TANK: 350 Liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance.
5. BASE FRAME: The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine
and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges. 6. Battery: 2 Nos 12V 180AHR Battery (Cummins/Kirloskar/Ashok Leyland) (SOR RATE)
-
-
-
... More
Supply and Run of 12 core 2.5 sqmm armored copper control cable FRLS in suitable PVC rigid pipe on wall/Ground/ceiling with connection (For AMF to 250KVA Gen set) (DATA-49)
30
-
-
... More
Supply, erection ,testing and commissioning of 3 KVA ONLINE UPS system with 1 Hr backup with Exide Heavy duty batteries SMF batteries for the. following configuration
1) True ON LINE -UPS SYSTEMS with Pulse width modulation(PWM) Technology using IGBT Inverter.
2) INPUT VOLTAGE RANGE: 170V-270V
3) 0UTPUT VOLTAGE: 230V ± 1%
4) DC Volt:120V
a. Output Under Voltage
b. Output Over Voltage
c. Output Overload
d. Output Short Circuit
e. HRC Fuses, Output & Battery
f. Battery Low trip
g. Battery Charging Current Limit. 17)INDICATIONS: 1. Mains On,
2. Inverter On,
3. Load on U.P.S.
4. Battery Low 5.Over load
6.lnverter Trip. (DATA-5O)
1
-
-
... More
Supply and Fixing of 32A DP Changeover MCB (Hager Make) with suitablel3781.00 DP Sheet Steel Enclosure Box (Hager Make) with Suitable necessary earth connection. (DATA-51)
2
-
-
... More
Earthing as per ISI specification with an earth electrode of 2.10 metreClass 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 233)
20
-
-
... More
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall/ floor/ ground for earth connection. (SD 76)
150
-
-
... More
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall/ floor/ ground for earth connection. (SD 77)
40
-
-
... More
and run of 2 of No 8 copper in PVC for earth connection. (From Lift to Lift Earth pit) (DATA-52)
50
-
-
... More
Construction of a RCC concrete foundation of size for 250 KVA generator 5500(L)x2000(B)x1200(H)mm (approx weight 6500 KG) with cement concrete 1:2:4 with sand cushion all around the foundation for the erection of 250 KVA Generator set with proper alignment. (CER No. /22- 23)
1
-
-
... More
Preparation of site plan physical layout electrical schematic diagram in 5 sets, getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining CEIG safety certificate preparation of 2 sets of approved drawing and a copy of safety certificate in a neat frame work to be fixed in HT/Generator room and payment of CEIG inspection fees for HT
1
-
-
... More
Sub-Total of Electrical Works
-
-
-
... More
LAN, PA SYSTEM, EPABX, CC TV
-
-
-
... More
Supply and fixing of 24 port 10/100/1000 Mbps fully imanaged switch with fibre port.
Make: D-Link/Eq.
(Data - A1)
2
-
-
... More
Supply and fixing of 24 port 10/100/1000 Mbps unmanaged switch.
Make: D-Link/Eq.
(Data - A2)
23
-
-
... More
Supply and fixing of 24 port Jack panel fully loaded. Make: D-Link/Eq.
(Data - A3)
23
-
-
... More
Supply, fixing and termination of RJ 45 I/O box with face plate and back box for LAN.
Make: D-Link/Eq.
(Data - A4)
303
-
-
... More
Supply and fixing of CAT6 1 Mtr. Patch cord. Make: D-Link/Eq.
(Data-A5)
303
-
-
... More
Supply and laying of CAT 6 cable in existing 1" PVC pipe including numbering and ferruling (For LAN and CCTV).
Make: D-Link/Eq.
(Data-A6)
13120
-
-
... More
Supply and fixing of 6U Rack wall rack with power sockets, cable manager and 0.6KVA UPS.
Make: D-Link/Eq.
(Data-A7)
25
-
-
... More
Supply and laying of 6 core indoor OFC cable in existing PVC pipe.
(Data-A8)
1150
-
-
... More
Supply and laying of 25mm dia 1" PVC pipe on wall and ceiling.
(Data-A9)
8200
-
-
... More
Supply and fixing of digital ISDN EPABX system with 8P & T line and 250 Nos of analog extension with voice control and operator console, multilingual menu driven and keys name display on LCD with 1 KVA UPS 60 minutes power backup.
Make: NEC / eq.
Model No:SV9100
(Data-A10)
1
-
-
... More
Supply, fixing and termination of RJ11 I/O box with face plate and back box for LAN.
Make:D-Link/Eq.
(Data-A11)
215
-
-
... More
Supply, fixing and termination of 500 pair DB with krone module and necessary connections.
(Data-A12)
1
-
-
... More
Supply, fixing and termination of 100 pair DB with krone module and necessary connections.
(Data-A13)
3
-
-
... More
Supply and laying of 0.5mm 50 pair telephone cable in existing PVC pipe make: Finolex/eq.
(Data-A14)
600
-
-
... More
Supply and laying of 0.5mm 2 pair telephone cable in existing PVC pipe.
Make: Beetel/Eq.
(Data-A15)
9675
-
-
... More
Supply and Installation of caller ID telephone instrument.
Make: Beetel/Eq.
(Data-A16)
150
-
-
... More
Supply and Installation of 4 MP IP bullet Camera, WDR 3.6 mm fixed lens.
Make: Hikvision/Eq.
(Data-A17)
32
-
-
... More
Supply and Installation of 32 channel Network Video recorder, bandwidth support 2 SATA HDDs up to 8 TB.
Make: D-link/Eq.
(Data-A18)
1
-
-
... More
Supply and laying of RG 6 co axial cable in existing pvc pipe.
Make: Comscope/eq.
(Data-A19)
600
-
-
... More
Supply and Installation of 24-port poE
2 Gigabit managed switch, which supports IEEE802.3 af/at poE standard.
Make:D-Link/Eq.
(Data-A20)
3
-
-
... More
Supply and Installation of 4U wall rack, with front glass door with lock and key facilities and 0.6 KVA UPS, Make:D-Link/Eq.
(Data-A21)
4
-
-
... More
Supply and Installation of 8TB built in Hard Disc Drive. Make: Seagate/Eq.
(Data-A22)
2
-
-
... More
Supply and Installation of 43 inches LED TV with following features:1. USB input 2. HDMI port 3. Clear audio + 4. Motion flow XR 200 5. Full HD 1080.
Make:SONY/Eq.
Model No:W672G
(Data-A23)
6
-
-
... More
Supply and Installation of 240W high power PA amplifier which operates on AC&DC power 7 mics and 2 aux inputs speaker output 4 ohm, 8 ohm 70V&100V, frequency response 50 Hz-15000 HZ.
Make: Ahuja/Eq.
Model No: SSA 160 DP
(Data-A24)
3
-
-
... More
Supply and Installation of 10 W ceiling speaker with power tap selection on 2.5W/5W/10W on 100V through female receptacle.
Make:Ahuja/Eq.
Model No: CSX-6101T
(Data-A25)
18
-
-
... More
Supply and run of 2 core 1.5 Sq.mm Loudspeaker cable with PVC pipe. Make: Orbit/Eq.
(Data-A26)
180
-
-
... More
Supply and Installation of 1 KVA Servo Voltage Stabilizer with No Waveform Distortion, Less than 1 sec Stabilization Time, Voltmeter displays output voltage, specifically designed for audio equipment, over and under Voltage correction (Automatically regulates in both conditions), Wide Input Voltage Range for Indian Conditions 180 to 250 Volts. Make: Studiomaster Model No: SVC 1000
(Data-A27)
3
-
-
... More
Supply and Installation of wireless conference microphone with transmitter. Make:Studiomaster Model No: XR100C
(Data-A28)
6
-
-
... More
Supply and Installation of 17U floor standing audio rack with power sockets and lock and key facilities.
Make:Valrack/Eq.
(Data-A29)
3
-
-
... More
Supply and Installation of 85 inch interactive display supports windows 10, 2 nos HDMI ports, 2 nos USB and audio ports with 1 KVA UPS for 1 hour backup.
Make: Hikvision
(Data-A30)
3
-
-
... More
Supply and Installation of AA 1.5 V battery for wireless microphone. Make: Duracell Ultra /Eq.
(Data-A31)
50
-
-
... More
Supply and Installation of AA 1.5 V battery for wireless microphone. Make: Tata sky/Eq.
(Data-A32)
5
-
-
... More
Testing, Programming and commissioning of software for the EPABX intercom system, LAN system, interlinking switches, splicing cgarges, number allotment, testing of caller ID telephone, assignment of zero dialing, linking of DB's, voice caller settings, RJ 11 I/Os and connectors etc.,
1
-
-
... More
Sub-Total for LAN, PA SYSTEM, EPABX, CC TV
-
-
-
... More
Calculation of SubTotal, GST and Total carried out by system automatically
-
-
-
... More
Total Amount for above all items
1
-
-
... More
GST 18% for the above Total Amount
1
-
-
... More
Grand Total in Figures (Total + GST)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements