Greater Chennai Corporation Tender

Supplying mild steel rods upto 16mm dia including cutting bending hooks cranking fabricating assembling and laying in exact position tieing with soft steel wire 16 or 18BWG etc. complete for all RCC works

Cement concrete work 1:1.5:3 (1 cement 1.5 river sand and 3 blue granite broken stone jelly 12 to 20mm gauge) cast in situ including consolidation curing etc. for all RCC works upto basement.

Plastering with cement mortar 1:4 (1 cement and 4 river sand)12mm thick including curing etc. complete.

Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years..

Supplying and fixing of M.S.Grills forWindows/Verandah/Ventilator s Grill of standard rectangular designusing 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion.The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm forfixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall includingone coat of primer etc.complete. (As per sketch enclosed) andalso as directed during execution.

For making and fixing M.S.Sheet Door of required size with two shutter using necessary M.S.Angles 50x50x6mm/40x40x6mm "L" Angles as diagonal Bracings 4Nos. for each shutter and centre Bracings for 1No.for each shutter. M.S.Flats 25x6mm/40x6mm and M.S.Sheet 1.25mm thick (18 gauge) and providing hinges welded with M.S.Angles 50x50x6mm bits at three places at equal intervals on both sides Latches 25cm size length for locking arrangements providing 12mm dia. M.S.Rod running through the hinges on both vertical side for easy swining purpose of doors including one coat of pFor making and fixing M.S.Sheet Door of required size with two shutter using necessary M.S.Angles 50x50x6mm/40x40x6mm "L" Angles as diagonal Bracings 4Nos. for each shutter and centre Bracings for 1No.for each shutter. M.S.Flats 25x6mm/40x6mm and M.S.Sheet 1.25mm thick (18 gauge) and providing hinges welded with M.S.Angles 50x50x6mm bits at three places at equal intervals on both sides Latches 25cm size length for locking arrangements providing 12mm dia. M.S.Rod running through the hinges on both vertical side for easy swining purpose of doors including one coat of primer cutting iron members welding fixing door in position etc. complete as directed during execution (as per design drawing enclosed).(Materials to be used with relevent ISI STD).. BD-795A SQM 3165.00 31650.00

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour

Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm with suitable rabate for housing the shutter.including labour charges etc. complete.as per ISI standard

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with painting of suitable colour for open PVC light point / fan point (For electronic regulator)(WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB)(For these items provision shall be made separately which are separately included in the schedule)

Supply and Fixing of 48" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY and FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18" ) CROSS ARM WITH 300 MM DOWN PIPE )

Cost of supply of 18w LED tube ( retrofit to existing 36/40w tubewiring to be changed)

Supply and fixing of 4way SP DB of 16A / Way with 16A DP switch with metal clad of 500 V (Side Handle) FandN on suitable angle iron frame work with trunking box MS cable entry box with earth connection.

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point.

Wiring with 2x1.5sqmm(22/0.3) PVC insulated SC unsheathed Cu. Conductor cable of 1100V grade in suitable heavy cauge M.S.conduit pipe concealed in wall and ceiling with MS accessories inflush with wall with suitable MS box to the house control switch and regulator With 3rnm thick hylum sheet cover for M.S switch box, with continuous earth wire connection of 14 SWG TC wire and rnaking good of the concealed portion with suitable colour for concealed fan point (For rheostatic type fan regulator)

Wiring with 3x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories, with switch box with 5A F.T. switch (Two way) in flush with wall and covered with hylem sheet of 3 mm thick With painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open stair case light point.

Supplying and Jointing 40mm dia P.V.C pipe.includingcutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof afterfixing with necessary scaffolding etc. complete.

Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete.

Supplying and fixing 40mm dia G.M.Gate valve.

Supplying and fixing P.V.C. screw down tap of size 20mm dia.

Supplying and erecting HDPE plastic vertical cylindrical 2000 Litre Water Storage Tank. Strickly adhering ISI Standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City limit.

Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets 15mm diaC.P.Pillar tap 32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white lead teakwood plug screws rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks)

Supplying and fixing chromium plated brass towel rail 60cm long.

Supplying and fixing 60x45cm best Belgium mirror (bevelled edge)with plywood back etc. complete

Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation 40mm size brick jelly concretein C.M. 1:4:10 ( 1 cement 4 river sand and 10 broken brickjelly) stock brick work in C.M. 1:6 (1 cement and 6 river sand)for 23cm thick wall benching channelling and plastering interior exterior and top with C.M. 1:3 ( 1 cement and 3 riversand) 12mm thick and providing 7.5cm thick R.C.C. loose slabcovering in C.C. 1:1.5:3 ( 1 cement 1.5 river sand and 3 bluegranite broken stone jelly of 12mm to 20mm size) with necessaryreinforecement and arrangements to lift for cleaning purpose etc. complete

Supplying and fixing PVC 160mm dia rain water down fail pipe asper ISI standard (I.S.4985) including PVC bends without doorarrangements shoes gratings with clamps of suitable size fixedto wooden plugs embeded in walls in cement mortar 1:3 (1 cement 3 river snad including cutting beles in walls and making goodthe same after fixing the plugs etc. complete as directed duringexecution.

Supplying and fixing P.V.C. pipe 110mm dia rain water down fallpipe as per ISI standard (I.S.4985)including P.V.C.Bends withoutdoor arrangements shoes gratings with F.I.Clamps 40mmx20mm ofsuitable size fixed to wooden kplugs embeded in walls in cementmortar 1:3 (1 cement and 3 river sand including cutting holes inwalls and making good the same after fixing the plugs etc.complete as directed during execution..

ALUMINIUM DOOR SHUTTER WITHOUT FRAME Aluminium Door Single Leaf Size 2.1M X 1.0 M Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of size (Frame : Section - 101.60 x 44.45 x 3.18 mm @ 2.399 Kg/m, Shutter : Top, Middle, Vertical style- 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45 x2.5mm @ 1.974 Kg/m) with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials,Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Site Engineer before fixing as directed.

ALUMINIUM OPENABLE TYPE WINDOW (Three Leaves) Size 1.30 x 1.80mMaufacturing supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges,stays and fixing 4 mm thick plain / frosted/ pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)

Providing and laying first quality Vertified tiles of all colours of size 605mmx605mmx9.6mm in cm 1:3 12mm thick including pointing with white cement. Labour Materials etc. (Relevent ISI std).

Supplying and paving second quality white glazed tiles 30x20cm x 6 mm with relevent ISI STD size of superior quality and of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cement polishing clearing etc. complete.".

Supplying and fixing in position best Indian type water closet 51cm of superior quality and approved make white glazed earthernware with P or S trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement 4 river sand and 10broken brick jelly) and sand filling around the closet including finishing the surface with C.M.1:3 ( 1 cement and 3 river sand) 20mm thick including making good all the disturbed portions etc. complete.

Flooring with ordinary cuddapah slabs 50mm thick jelly in Lime mortar 1:2:5 ( 1 lime 2 river sand and 5 broken brick jelly) including pointing with C.M.1:3 ( 1 cement and 3 river sand) etc. complete..

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of redoxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS

Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD)

Removing flat and pan tile ormangalore tiles over flat tiles without roof timbers stacking at the site asdirected during execution

Dismantling the existing brick or stone masonry work in lime mortar under 3M high including carefully clearing the debris etc. complete.

FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles (600mm x 600mm) and Painting with two coat of plastic emulsion paint over one coat of primer

Supplying and fixing of Cudappah Wash Basin

Supplying and fixing of Ply Wood Racker with accessories

Existing Bore Flushing and Existing Motor Repair

Supply and fixing of Lighting Name Board

GST 12%